Instruction/ maintenance manual of the product LCT1676-001B-A JVC
Go to page of 88
Important Note: In the spaces below , enter the model and serial number of your television (located at the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide. Keep this user ’s guide in a convenient place for future reference.
2 Important Safety Precautions W ARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS TV SET TO RAIN OR MOISTURE. CAUTION: T O INSURE PERSONAL SAFETY , OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS UNIT . 1. Operate only from the power source specified on the unit.
3 CAUTION: Please read and retain for your safety . Electrical energy can perform many useful functions. This TV set has been engineered and manufactured to assure your personal safety . But improper use can result in potential electrical shock or fire hazards .
4 7 An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
5 13 For added protection of the TV set during a lightning storm or when the TV set is to be left unattended for an extended period of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to product due to lightning storms or power line surges.
6 W arnings Displaying fi xed images on your screen for extended periods of time can leave a subtle but permanent ghost image in your screen. This is referred to as "burn-in". T o avoid this, mix your viewing patterns and aspect modes from time to time.
7 T able of Contents Unpacking your TV . . . . . . . . . . . . 9 TV Models . . . . . . . . . . . . . . . . 1 1 TV Remote Control . . . . . . . . . . . 12 Getting Started . . . . . . . . . . . . . 13 The Remote Control . . . . . . . . . . 13 Connecting Y our Devices .
8 Digital Setup . . . . . . . . . . . . . . . 71 Antenna Level . . . . . . . . . . . . . 71 Digital Sound . . . . . . . . . . . . . . 72 Aspect Ratios . . . . . . . . . . . . . . 72 Cable Card Application . . . . . . . . . 73 i.LINK Auto Play . . . . .
9 AA Batteries x 2 T elevision x 1 Remote Control x 1 Note: Y our television and/or remote control may differ from the examples illustrated here. Quick Setup Unpacking your TV Thank you for your purchase of a JVC Color T elevision. Before you begin setting up your new television, please check to make sure you have all of the following items.
10 Quick Setup Unpacking your TV We recommend that before you start using your new television, you read your entire User’s Guide so you can learn about your new television’s many great features. If you’re anxious to start using your television right away , a quick setup guide follows on the next few pages.
11 INPUT–1 INPUT–2 COMPONENT VIDEO Y Pb Pr S-VIDEO OVER INPUT-1 INPUT-2 OVER INPUT-3 RL AUDIO VIDEO CENTER CHANNEL INPUT 75Ω (VHF/UHF) AV COMPULINK III AUDIO OUT R L AUDIO (ANALOG) R L VIDEO (DIGITAL) AUDIO (DIGITAL) DIGITAL IN VIDEO AUDIO L R i.
12 INPUT INDEX ASPECT FREEZE SWAP SELECT RETURN+ FAVORITE THEATER PRO NATURAL CINEMA VIDEO STATUS TIMER i.LINK MENU SOUND LIGHT TV CATV VCR DVD MUTING MENU BACK GUIDE RM-C14G REW VCR CHANNEL PREV NEXT VCR DVD POWER TV VCR FF PLAY REC PAUSE OPEN CLOSE STILL PAUSE STOP CH CH VOL VOL OK MULTI SCREEN TWIN D/A 123 456 789 0 TUNE TV POWER C.
13 These quick setup pages will provide you, in three easy steps, with the basic information you need to begin using your new television right away . If you have questions, or for more detailed information on any of these steps, please consult other sections of this manual.
14 Quick Setup Connections Step 2 – Connecting Y our Devices Notes: • These connections are examples. • After you are finished connecting your devices, plug the power cord into the nearest power outlet and turn on the TV . • T o connect a DVD player , see VCR Connection.
15 INPUT-1 INPUT-2 COMPONENT VIDEO Y Pb Pr S-VIDEO OVER INPUT-1 INPUT-2 OVER INPUT-3 RL AUDIO VIDEO CENTER CHANNEL INPUT 75Ω (VHF/UHF) AV COMPULINK III AUDIO OUT R L VIDEO AUDIO L R TV Rear Panel Co.
16 Quick Setup Connections Diagram #2 INPUT-1 INPUT-2 COMPONENT VIDEO Y Pb Pr S-VIDEO OVER INPUT-1 INPUT-2 OVER INPUT-3 RL AUDIO VIDEO CENTER CHANNEL INPUT 75Ω (VHF/UHF) AV COMPULINK III AUDIO OUT R.
17 Quick Setup Connections Connecting to Monitor/Recording Output T erminal INPUT-1 INPUT-2 COMPONENT VIDEO Y Pb Pr S-VIDEO OVER INPUT-1 INPUT-2 OVER INPUT-3 RL AUDIO VIDEO CENTER CHANNEL INPUT 75Ω .
18 JVC’s A V CompuLink feature makes playing video tapes or DVDs totally automatic. Simply insert a pre-recorded tape into your JVC brand VCR or DVD into your JVC DVD player and the device will automatically turn on and begin playback.
19 Quick Setup Connections 1) Connect a yellow composite cable from the camcorder VIDEO OUT , into the VIDEO IN on the front of the TV , OR connect an S-Video cable from the front of the TV to the camcorder . 2) Connect a white cable from the camcorder LEFT AUDIO OUT , into the LEFT AUDIO IN on the front of the TV .
20 Quick Setup Connections Connecting to the Surround Amplifier CENTER CHANNEL INPUT 75Ω (VHF/UHF) AV COMPULINK III AUDIO OUT R L Front CENTER CHANNEL OUTPUT TV Rear Panel Front Surround 1) Connect the Pin cable from the TV's CENTER CHANNEL INPUT terminal to the surround amplifier's CENTER CHANNEL OUTPUT terminal.
21 Quick Setup Connections By connecting a Digital TV Receiver , high definition pictures can be displayed on your TV in their digital form. AUDIO (ANALOG) R L VIDEO (DIGIT AL) AUDIO (DIGIT AL) DIGIT .
22 By connecting an HDMI compatible device, high definition pictures can be displayed on your TV in their digital form. Some HDMI devices can include DVD players, D-VHS or any HDMI compatible device. HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all digital audio/video interface.
23 Quick Setup Connections By connecting your A V Receiver to your television's V1 Smart Input, you can watch picture sources from many different devices, without having to change or use the other input connections on your TV . This allows you to free up the other input connections so you can connect more devices to your television.
24 Quick Setup Connections Connecting an i.LINK compatible device to the back of your television i.LINK is a digital serial interface that allows devices equipped with an i.LINK connector to exchange digital video signals, digital audio signals and device control signals bi-directionally over a single cable.
25 When you turn your television on for the first time the interactive plug-in menu will appear . The plug-in menu helps you to get your TV ready to use by letting you set your preferences for: • The language in which you want the onscreen menus to appear .
26 Quick Setup Plug-In Menu T o set your clock manually (without using the XDS signal), choose MANUAL. If you choose AUTO, see auto clock set above. √ ® T o choose MANUAL † T o TIME √ ® T o se.
27 Quick Setup Plug-In Menu The Quick Setup is complete ST OP In auto tuner setup, the TV automatically scans through all available channels, memorizing the active ones and skipping over blank ones or channels with weak signals. This means when you scan (using the C HANNEL +/– buttons) you will receive only clear , active channels.
28 Remote Programming Y ou can program your remote to operate your cable box, satellite receiver , VCR or DVD player by using the instructions and codes listed below . If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control supplied by the manufacturer .
29 Remote Programming The remote control is programmed with VCR codes for power on/off, play , stop, fast-forward, rewind, pause, record, channel up/down operation. 1) Find the VCR brand from the list of codes shown below . 2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.
30 Remote Programming The remote control is programmed with DVD codes for power on/off, play , stop, fast-forward, rewind, previous/next chapter , tray open/close, and still/pause operation. 1) Find the DVD player brand from the list of codes shown below .
31 Remote Programming Cable/Satellite Search Codes Function 1) Slide the first 2-W ay Mode Selector switch to CA TV . 2) Press the P OWER and R ETURN +/TV buttons. Hold for at least three seconds and release. 3) Press the P OWER button on the remote, and see if the cable or satellite box responds.
32 T o bring up the onscreen menu , press the M ENU button on the remote control. The item that appears in green is the one currently selected. If you use the Menu button on the TV’ s front panel instead of the remote, an additional menu screen showing INPUT , VIDEO ST A TUS and ASPECT will appear between INITIAL SETUP and PICTURE ADJUST .
33 Y our television comes with JVC’s onscreen menu system. The onscreen menus let you make adjustments to your television’s operation simply and quickly . Examples of the onscreen menus are shown on the next page. Detailed explanations on using each menu follow later in this guide.
34 Press the M ENU button Onscreen Menus Notes: • The DIGIT AL-IN menu can only be displayed when a 480p picture signal is input to the digital-in terminal and the picture is being displayed on the screen.
35 Initial Setup Auto T uner Setup The auto tuner setup function is described on page 27 as the interactive plug-in menu. If you need to run the auto tuner setup again, follow the steps below .
36 Initial Setup Channel Summary Channel summary allows you to customize the line-up of channels received by your TV . Regarding analog channels, you can add or delete channels from the line-up or prevent any unauthorized viewers from watching any or all 191 channels.
37 Initial Setup How to set the channel label. (This is only for analog broadcasting.) Press the M ENU button π † T o CHANNEL SUMMARY √ ® T o operate π † T o the ID column Press the O K button to enter √ ® T o select the character you want π † T o move to the next space .
38 Initial Setup When a viewer attempts to watch a guarded channel, the following message appears: T o watch a channel that you have locked, enter the Lock Code using the 10 key pad. If the wrong code is entered, the message “INV ALID LOCK CODE!” will flash on the screen.
39 Initial Setup Y ou can block programs that are not rated. Press the M ENU button π † T o V -CHIP √ ® T o operate (The lock icon appears) Press Z ERO to access V -Chip setup options π † T o.
40 U.S. P ARENT AL RA TING SYSTEMS Programs with the following ratings are appropriate for children. ❒ TV Y is Appropriate for All Children Programs are created for very young viewers and should be suitable for all ages, including children ages 2 - 6.
41 Initial Setup Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV , S, etc.) and press the π † or √ ® to move the cursor to the correct location. Press O K to turn the locking feature on or off. An item is locked if the icon appears instead of a “—”.
42 Initial Setup ❒ NR – Not Rated This is a film which has no rating. In many cases these films were imported from countries which do not use the MP AA ratings system. Other NR films may be from amateur producers who didn’t intend to have their film widely released.
43 Initial Setup Channel guard and V -Chip settings are protected by a four-digit lock code. Y our TV comes preset with a lock code of “0000”. Y ou may change the code to any four-digit number you wish. T o change the lock code, follow the steps below .
44 Initial Setup This TV has three color projection tubes: one for red, green, and blue. When mixed together in the proper portions, the output of these three color tubes can produce any color . T o produce these colors, however , the beams must be precisely aligned over each other so that the colors can be mixed.
45 Press the M ENU button π † T o CONVERGENCE √ ® T o Enter π † T o choose MANUAL √ ® T o Enter If all the lines are white, no convergence adjustment is necessary . If not, you need to perform the manual color convergence below . Select the location you want to adjust by using the number buttons on the remote control.
46 This function lets you preview the many different viewing modes of your TV . It will cycle through “Multi Screen Demo”, “Picture in Picture Demo”, all of the different “Aspect” ratios and all of the different “V ideo Status” modes.
47 Initial Setup Press the M ENU button π † T o CLOSED CAPTION √ ® T o enter π † T o MODE √ ® T o select CAPTION or TEXT in MODE π † T o CAPTION or TEXT √ ® T o select a caption (CC1.
48 Initial Setup • Closed caption subtitles are usually found on closed caption channel CC1. Some programs may include additional text information which is usually found on text channel T1.
49 Initial Setup This function automatically shuts off your TV when there is no signal from the channel the TV is on. Press the M ENU button π † T o AUT O SHUT OFF √ ® T o turn ON or OFF Press t.
50 Initial Setup This allows you to lock the keys on the front of the TV , so that a child may not accidentally change your viewing preferences. Press the M ENU button π † T o FRONT P ANEL LOCK √.
51 Initial Setup This function is used to label video input connections for the onscreen displays. Press the M ENU button π † T o VIDEO INPUT LABEL √ ® T o enter π † T o select the desired vi.
52 Initial Setup Position adjustment allows you to adjust the position of the picture on the screen vertically when the aspect is set to panorama, cinema or full.
53 Initial Setup The DIGIT AL-IN option can only be displayed in the INITIAL SETUP menu when an HDMI480p picture signal is being input to the DIGIT AL-IN terminal. This option adjusts the position when an HDMI or DVI 480p picture signal is being displayed on the screen.
54 Initial Setup When you are using a surround system, you can substitute the speaker of this television for the center speaker of your surround system.
55 Press the M ENU button π † T o TINT , COLOR, PICTURE, BRIGHT or DET AIL √ ® T o enter √ ® T o adjust the setting π † T o move to the next setting Press the M ENU button when finished These settings allow you to change and adjust the way the picture appears on your television.
56 V elocity scan modulation circuitry varies the electron beam’s horizontal scanning speed to help accentuate the differences in picture brightness to sharpen the edges of images.
57 These settings allow you to change and adjust the sound on your television. BASS – Y ou can increase or decrease the level of low-frequency sound in the TV’s audio with the bass adjustment. TREBLE – Use treble to adjust the level of high-frequency sound in your TV’ s audio.
58 Clock/T imers Set Clock The set clock function is described on page 26 as the interactive plug-in menu. Y ou can choose to set the clock automatically or manually .
59 The on/off timer lets you program your television to turn itself on or of f. Y ou can use it as an alarm to wake up, to help you remember important programs, or as a decoy when you’re not home.
60 Button Functions Y our television has two kinds of screen: TWIN (2 channels) and INDEX (12 channels). Multi Screen Function Note: After you press any multiscreen buttons, if you press the menu button, only the picture adjust screen will appear . T win Activate the split-screen option by pressing T WIN on the remote control.
61 Button Functions This allows you to quickly look at up to 12 channels at a time so that you can decide which one to watch. Notes: • Only RF input signal will be displayed.
62 Button Functions T urns the TV on or off. Press the P OWER button Use the number buttons on the remote control to move directly to a specific channel. For example, to move to channel 12: 0 (Zero) 1 (One) 2 (T wo) Power Number Buttons - 10Key Pad T une Selects the signal input source for the television: Input-1, 2, 3, 4 DIGIA TL-IN or i.
63 Button Functions Note : SMART SOUND (A V -56P785 ONL Y) By pressing the S OUND button, you can change the A.H.S. (Advanced Hyper Surround) mode, BBE, and SMART SOUND on or off. A.H.S. - Adds a more spacious surround sound. Music gives basic effect and movie for more effect.
64 The V IDEO S T ATUS button gives you a choice of four TV picture display settings, including a display of your own preferences. Standard - Resets the picture display to the factory settings. Dynamic - Gives a vivid picture with better contrast when viewing in a brightly lit room.
65 Button Functions The Sleep T imer can turn the TV off for you after you fall asleep. Program it to work in intervals of 15 minutes, for a total time of up to 180 minutes.
66 Button Functions The display screen shows the current status of timers, inputs and XDS ID. Press the D ISPLA Y button The screen to the right shows the following information: • The current channe.
67 Button Functions The Favorite button allows you to select your favorite channels easily . First, you must register the channels that you like. See how to register below .
68 This feature will help you adjust the picture you are watching to give you the best possible picture quality . REGULAR - The regular ratio is used when you want to watch a 4:3 broadcast or recorded program without modifying the original picture to fit the dimensions of your 16:9 screen.
69 The M ENU button allows you to access JVC’s onscreen menu system. Press M ENU to activate the onscreen menu system. • See individual topics like “Sound Adjust” for specific information on using menus. Menu Button Functions Back OK This button allows you to go back in the menu to change a selection or correct a mistake.
70 Use either the television’s own tuner or a cable box to select channels. Set this switch to TV to operate the television’s built-in tuner . Move the switch to CA TV to operate a cable box. Note: • See page 28 for information on programming your remote for cable box operation.
71 Use this function when you are receiving a digital broadcast. Press the M ENU button π † T o DIGIT AL SETUP √ ® T o enter The onscreen will appear Notes: • Software Update will only appear when the SD Card is inserted.
72 Aspect Ratio Y ou can select the aspect mode for A TSC from 4:3 or 16:9. Press the M ENU button π † T o DIGIT AL SETUP √ ® T o enter π † T o Aspect Ratio √ ® T o select 4:3 or 16:9 Press the M ENU button when finished Notes: • Set the mode to 4:3 or 16:9 before you record a program using the A TSC MONITOR OUT .
73 At first, insert the SD(Multi-media) card into the memory card slot. This function will appear only when you insert an SD Card. Press the M ENU button π † T o DIGIT AL SETUP √ ® T o enter π .
74 Digital Button Functions Sub Channel Digital CH D/A (Digital/Analog) The D/A button changes the analog and digital channel. Each time you press the D/A button, you can switch back and forth the analog and digital channels. Digital channels have a "D" in front of the channel number .
75 Digital Button Functions i.LINK Menu i.LINK has two menus - Controller and Device. By connecting a D-VHS VCR with an i.LINK cable, you can set the timer easily . Notes: • The i.LINK/T imer function will only work when you are receiving digital programming only .
76 Device T o operate, select a device. π † T o select your device connecting with i.LINK Press the OK button Notes: • If you do not select the device, you cannot use the i.LINK timer functions. • When one device is selected and you select controller , you will move to the Controller onscreen.
77 Y ou can set the two timers: Record and view . The timer starts the recording or turns to the channel you set for it automatically . Press the T IMER button π † T o New Reservation Press the O K.
78 Timer Edit When you want to confirm the timer you set or edited, or delete the timer setting, use this function. Timer Edition Press the T IMER button π † T o select the timer list you want to e.
79 Y ou can view the program from the GUIDE. Notes: • The GUIDE function will only work when you are receiving digital programming only . • The GUIDE will not show the correct time and date if you have not performed the set clock function on your television.
80 OSD Information This OSD warning appears when the digital channel that you have selected is too weak to receive or no signal is being detected for that channel.
81 Cable Card Information Cable card offers information when a cable card is inserted into the CABLE CARD slot on the back of the TV . Note: • Please contact your local cable company regarding detailed information.
82 No Program If the TV channel you selected, or were watching is not receiving a signal, "NO PROGRAM" appears on the television screen. It appears when that channel is not receiving a signal and you have the Noise Muting function OFF and you have a single screen.
83 T roubleshooting There is no power There is no picture or sound Y ou cannot select a certain channel The power turns off by itself The clock is wrong The color quality is poor There are lines acros.
84 AV-4856P775785 (B) 84 12/20/04, 9:24:18 AM.
85 AV-4856P775785 (B) 85 12/20/04, 9:24:18 AM.
86 Rear Projection Television Type Reception Format Reception Range Power Source Power Consumption Model AV-56P785 AV-56P775 NTSC, BTSC System (Multi-Channel Sound) ATSC Terrestrial, Digital Cable VHF.
87 Notes AV-4856P775785 (B) 87 12/20/04, 9:24:18 AM.
JVC COMP ANY OF AMERICA Division of JVC Americas Corp. 1700 V alley Road W ayne, New Jersey , 07470 JVC CANADA, INC. 21 Finchdene Square Scarborough, Ontario Canada, M1X 1A7 AV-4856P775785 (B) 88 12/2.
An important point after buying a device JVC LCT1676-001B-A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC LCT1676-001B-A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC LCT1676-001B-A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC LCT1676-001B-A you will learn all the available features of the product, as well as information on its operation. The information that you get JVC LCT1676-001B-A will certainly help you make a decision on the purchase.
If you already are a holder of JVC LCT1676-001B-A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC LCT1676-001B-A.
However, one of the most important roles played by the user manual is to help in solving problems with JVC LCT1676-001B-A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC LCT1676-001B-A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
