Instruction/ maintenance manual of the product KV-C1 JVC
Go to page of 32
ENGLISH ESP AÑOL FRANÇAIS KV -C1 (EN) TQBX0225[J] KV-C1 TQBX0225 [J] MOBILE TV TUNER SYSTEM SISTEMA DE SINTONIZADOR DE TV MÓVIL SYSTÈME DE TUNER DE TÉLÉVISION MOBILE INSTRUCTIONS MANUAL DE INSTRUCCIONES MANUEL D’INSTRUCTIONS For customer Use: Enter below the serial No.
2 KV -C1 (EN) TQBX0225[J] CAUTIONS WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION: This TV tuner system should be used with DC 12V only . T o prevent electric shocks and fire hazards, DO NOT use any other power source.
3 KV -C1 (EN) TQBX0225[J] ENGLISH ESP AÑOL FRANÇAIS Cautions • BE SURE TO INSERT THE BA TTERIES PROPERL Y IN THE DIRECTIONS. IF THIS IS NOT DONE, IT MA Y CAUSE THE BA TTERIES TO GIVE OFF HEA T , CRACK OR ST ART A FIRE. • WHEN LIGHTNING OCCURS, DO NOT TOUCH THE ANTENNA WIRE OR THE TELEVISION.
4 KV -C1 (EN) TQBX0225[J] • Do not leave the liquid crystal panel surface facing upwards on top of the dashboard. (storage temperature range: –20 ° C to +80 ° C (–4 ° F to +176 ° F) ) Cautions for the liquid crystal panel (sold separately) • Do not strongly impact the liquid crystal panel.
5 KV -C1 (EN) TQBX0225[J] ENGLISH ESP AÑOL FRANÇAIS Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. T able of Contents Introduction to the Roles of the System Components .
6 KV -C1 (EN) TQBX0225[J] Introduction to the Roles of the System Components T uner unit POWER DISPLAY UNIT VIDEO VIDEO VIDEO L-AUDIO-R L-AUDIO-R AV INPUT 1 AV INPUT 2 L-AUDIO-R AV OUTPUT Terminal for.
7 KV -C1 (EN) TQBX0225[J] ENGLISH ESP AÑOL FRANÇAIS Introduction to the Roles of the System Components (continued) KV -M65 display unit (sold separately) POWER MODE MENU Used to display, select and determine the various adjustments (screen, menu).
8 KV -C1 (EN) TQBX0225[J] When pressed for 2 seconds or longer: The setting screens for various functions can be displayed. When pressed for 2 seconds or longer: The menus for image and sound can be displayed. When setting the menus: The Menu selection and adjustment can be decided.
9 KV -C1 (EN) TQBX0225[J] ENGLISH ESP AÑOL FRANÇAIS Introduction to the Roles of the System Components (continued) W ireless remote controller The numbers in the circles ( ) indicate the page on which an explanation is provided in this manual.
10 KV -C1 (EN) TQBX0225[J] Before using the wireless remote controller • A battery is already installed in the wireless remote con- troller . Remove the insulation film before using. How to replace the battery When it becomes necessary to bring the wireless remote controller close to the remote sensor for it to work, the battery is running low .
11 KV -C1 (EN) TQBX0225[J] ENGLISH ESP AÑOL FRANÇAIS W atching T elevision Engage the parking brake and turn on the engine. Note • When the display unit is installed in a location which can be viewed from the driver’s seat, the television image disappears while driv- ing and only the sound can be heard.
12 KV -C1 (EN) TQBX0225[J] W atching T elevision (continued) Speakers Car receiver (with Line In terminal) Select the channel you would like to watch. Note • When the bright and dark portions of the.
13 KV -C1 (EN) TQBX0225[J] ENGLISH ESP AÑOL FRANÇAIS Press the MENU button 3 times quickly and the CH MODE display is shown. Select MANUAL. After the CH MODE display disappears, press the [ ] or [ ] button for less than 2 seconds and select the channel you would like to watch.
14 KV -C1 (EN) TQBX0225[J] Press the MENU button 3 times quickly and select the CH MODE. Select AUTO. After the CH MODE display disappears, press the [ ] or [ ] button for 2 seconds or longer . When automatic storage is finished, press the [ ] or [ ] button for less than 2 seconds and select the channel you would like to watch.
15 KV -C1 (EN) TQBX0225[J] ENGLISH ESP AÑOL FRANÇAIS Operating the wireless remote controller Press the AUTO ST ORE button for 2 seconds or longer . When automatic storage is finished, press the [ ] or [ ] button for less than 2 seconds and select the channel you would like to watch.
16 KV -C1 (EN) TQBX0225[J] Controlling the Sound Selecting the volume of the built-in speakers (The TV tuner system is set to the ST ANDARD at the time of shipment from the factory .) Press the MODE button for 2 seconds or longer . Select the SPEAKER MODE.
17 KV -C1 (EN) TQBX0225[J] ENGLISH ESP AÑOL FRANÇAIS Select ST ANDARD. After the SPEAKER MODE screen disappears (occurs af- ter about 10 seconds), press the Menu button for less than 2 seconds and show the speaker volume level display . Adjust the speaker volume level.
18 KV -C1 (EN) TQBX0225[J] Adjusting the volume output level of the A V output terminal Perform steps 1 to 3 on page 16. Press the MODE button for 2 seconds or longer . Select the SPEAKER MODE setting using the [ ] and [ ] buttons. Press the MENU button.
19 KV -C1 (EN) TQBX0225[J] ENGLISH ESP AÑOL FRANÇAIS Adjusting Brightness For the automatic mode (The TV tuner system is set to the Auto Mode at the time of shipment from the factory .) Automatically adjusts the screen brightness to suit the brightness of the surrounding environment.
20 KV -C1 (EN) TQBX0225[J] Select AUTO. Note • When the AUTO Mode is selected in advance: With the wireless remote controller , it is possible to set this level directly using the Brightness button without having to bring up the DIMMER MODE screen.
21 KV -C1 (EN) TQBX0225[J] ENGLISH ESP AÑOL FRANÇAIS Adjusting Brightness For the manual mode The screen brightness can be adjusted manually . Press the MODE button for 2 seconds or longer . Note • When END is selected, the system returns to the initial screen.
22 KV -C1 (EN) TQBX0225[J] Select the MANUAL Mode. Note • When the MANUAL Mode is selected in advance: With the wireless remote controller , it is possible to set this level directly using the Brightness button.
23 KV -C1 (EN) TQBX0225[J] ENGLISH ESP AÑOL FRANÇAIS Press the MENU button for 2 seconds or longer . Select BASS. Press the MENU button. Adjust the BASS level.
24 KV -C1 (EN) TQBX0225[J] Adjustment points (The bass, treble and balance can be adjusted from the setting screens) BASS -15 BASS +15 Bass is reduced. Bass is increased. BASS (level of low tones) TREBLE -15 TREBLE +15 T reble is reduced. T reble is increased.
25 KV -C1 (EN) TQBX0225[J] ENGLISH ESP AÑOL FRANÇAIS Press the MENU button for 2 seconds or longer . Note • When END is selected, the system returns to the initial screen. • For an RGB screen, only the Black level and Contrast are shown. (Not used at present.
26 KV -C1 (EN) TQBX0225[J] Adjustment points (Image features can be adjusted from the various setting screens) BLACK -15 BLACK +15 BLACK LEVEL Makes the black portions of the screen easier to see (Night scenes, black hair , etc.) CONT -15 CONT +15 CONTRAST Normally set in the middle.
27 KV -C1 (EN) TQBX0225[J] ENGLISH ESP AÑOL FRANÇAIS Note • Refer to the installation manual for an explanation of how to make these connections. • Since the connection cord varies depending on what external devices are connected, refer to the video equipment manual as well.
28 KV -C1 (EN) TQBX0225[J] T roubleshooting In the following environments, the image quality may be impaired. Movement Doubling and tripling of images (ghosts) Image quality gradually worsens and colo.
29 KV -C1 (EN) TQBX0225[J] ENGLISH ESP AÑOL FRANÇAIS Check these points This is a characteristic of liquid crystal panels and is not a problem. (The liquid crystal panel is built with very high precision technology and has at least 99.99% effective image pixels.
30 KV -C1 (EN) TQBX0225[J] T o prevent damage to the system exterior Do not apply pesticides, benzine, thinner or other volatile substances to the unit. The cabinet surface primarily consists of plastic ma- terials. Do not wipe with benzine, thinner or similar sub- stances because this will results in discoloration or removal of the paint.
31 KV -C1 (EN) TQBX0225[J] ENGLISH ESP AÑOL FRANÇAIS Product type Mobile TV tuner system Power source voltage DC 14.4V (can be used within the range of 1 1V to 16V); negative ground only Reception c.
KV -C1 (EN) TQBX0225[J] KV-C1 Printed in Japan 0498MNMUBNMTS VICTOR COMP ANY OF JAPAN, LIMITED EN, SP, FR..
An important point after buying a device JVC KV-C1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC KV-C1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC KV-C1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC KV-C1 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC KV-C1 will certainly help you make a decision on the purchase.
If you already are a holder of JVC KV-C1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC KV-C1.
However, one of the most important roles played by the user manual is to help in solving problems with JVC KV-C1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC KV-C1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
