Instruction/ maintenance manual of the product KD-DV7405 JVC
Go to page of 65
- www.carsound.com.ua.
For canceling the display demonstration, see page 7. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0532-005A [A] KD-DV7406/KD-DV7405 DVD/CD RECEIVER Cover_KD-DV7406_005A_f.
2 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
3 How to reset your unit • Your preset adjustments will also be erased (except the registered Bluetooth device, see pages 26 and 27). How to forcibly eject a disc “Please Eject” appears on the display. • Be careful not to drop the disc when it ejects.
4 Detaching the control panel Attaching the control panel Opening and closing the control panel Avoid touching the connectors. How to use the M MODE and SEL buttons If you use M MODE or SEL (select), .
5 CONTENTS INTRODUCTIONS Playable disc type ........................................................................................................................... 6 Preparation .....................................................................
6 Disc type Recording format, file type, etc Playable DVD DVD Video (Region Code: 4) * 1 DVD Audio DVD-ROM DVD Recordable/Rewritable (DVD-R/-RW * 2 , +R/+RW * 3 ) • DVD Video: UDF bridge • DVD-VR .
7 INTRODUCTIONS Preparation Cancel the display demonstration and set the clock • See also pages 40 and 41. 1 Turn on the power. 2 Enter the PSM settings. 3 Cancel the display demonstrations Select “Demo,” then “Off.” Set the clock Select “Clock Hr” (hour), then adjust the hour.
8 Basic operations Using the control panel 9 • Volume control [Turn]. • Select the source [Press] * 1 . TUNER = DISC * 2 = USB * 2 (or USB-iPod ) * 2 = CD-CH * 2 /iPod * 2 (or EXT IN ) = BT-PHONE * 2 = BT-AUDIO * 2 = LINE IN = AV IN = (back to the beginning) p • Select/adjust the sound mode.
9 OPERATIONS Continued on the next page Installing the battery Insert the batteries into the remote controller by matching the polarity (+ and –) correctly. Caution: Battery shall not be exposed to excessive heat such as sunshine, fire, or the like.
10 2 5 / ∞ buttons • TUNER : Selects the preset stations. • DISC : – DVD-Video: Selects the title. – DVD-VR: Selects the program/playlist. – DivX/MPEG Video/MP3/WMA/WAV: Selects the folders if included. • USB : – DivX/MPEG Video/MP3/WMA/WAV: Selects the folders if included.
11 OPERATIONS e 3 (play) / 8 (pause) button • DISC/USB/USB-iPod/BT-AUDIO : Starts/pauses playback. r (end call) button • Ends the call. BAND / 7 (stop) buttons • TUNER : Selects the bands. • DISC/USB/USB-iPod/BT-AUDIO : Stops playback. t * 2 RETURN button • VCD: Returns to the PBC menu.
12 FM station automatic presetting — SSM (Strong-station Sequential Memory) You can preset up to six stations for each band. 1 While listening to a station... 2 3 Local FM stations with the strongest signals are searched and stored automatically in the selected FM band.
13 OPERATIONS Manual presetting Ex.: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band. Using the number buttons 1 2 3 Using the Preset Station list • When is shown on the display, you can move back to the previous screen by pressing number button 3.
14 To stop play and eject the disc • Press SOURCE to listen to another playback source. Prohibiting disc ejection To cancel the prohibition, repeat the same procedure. Disc operations Before performing any operations... Turn on the monitor to watch the playback picture.
15 OPERATIONS Operations using the control panel Pressing (or holding) the following buttons allows you to... Disc type (Number buttons) * 3 [Press] Select chapter [Hold] Reverse/fast-forward chapter .
16 After pressing M MODE, press the following buttons to... Disc type Skip 10 chapters (during play or pause) Repeat Chapter : Repeat current chapter Repeat Title : Repeat current title — Skip 10 ch.
17 OPERATIONS 5 Change to the selected item. A If File List is selected The list disappears and playback starts. B If Folder List is selected • If the current folder is selected, File List appears, then repeat steps 4 and 5 A to start playback. • If another folder is selected, playback starts from the 1st file of the selected folder.
18 To search for chapter/title/program/playlist/folder/track directly (DVD/DivX/MPEG Video/VCD/ MP3/WMA/WAV/CD) 1 While holding SHIFT, press DIRECT repeatedly to select the desired search mode. DVD-Video : VCD : DVD-VR : CD : DivX/MPEG Video : MP3/WMA/WAV : 2 While holding SHIFT, press the number buttons (0 – 9) to enter the desired number.
19 OPERATIONS Stop play Stop play Stop play Start play/Pause (if pressed during play) Start play/Pause (if pressed during play) Start play/Pause (if pressed during play) Reverse/forward track search * 1 • Forward slow motion * 2 during pause. (No sound can be heard.
20 Operations using the on-screen bar (DVD/DVD-VR/DivX/MPEG Video/VCD) These operations are possible on the monitor using the remote controller. 1 Show the on-screen bar (see page 21). 2 Select an item. 3 Make a selection. If pop-up menu appears... • To cancel pop-up menu, press RETURN.
21 OPERATIONS Information Operation On-screen bar Ex.: DVD-Video 1 Disc type 2 • DVD-Video/DTS-CD: Audio signal format type and channel • VCD: PBC 3 Playback mode * 1 DVD-Video: T. RPT : Title repeat C. RPT : Chapter repeat DVD-VR: C. RPT : Chapter repeat PG.
22 7 Track information 8 Track list with the current track selected To select a playback mode 1 While control screen is displayed... Playback mode selection screen appears on the folder list section of the control screen. 2 Select a playback mode. 3 Select an item.
23 OPERATIONS 3 Current page/total number of the pages included in the list 4 Current folder/track (highlighted bar) List screen (DVD-VR) You can use ORIGINAL PROGRAM or PLAY LIST screen anytime while playing DVD-VR with its data recorded. 1 Select a list screen.
24 Turn on the monitor to watch the playback picture if you play back a DivX/MPEG file. You can also control playback by referring to the monitor screen. (See also pages 20 – 23.) • See pages 18 – 23 for operation using the remote controller. • See pages 45 and 46 for more settings.
25 OPERATIONS On the control panel: 1 2 Enter Dual Zone settings. Activate or deactivate Dual Zone. The source automatically changes to “DISC” when Dual Zone is activated.
26 Listening to the Bluetooth ® devices For Bluetooth operations, it is required to connect the Bluetooth Adapter (KS-BTA200) to the CD changer jack on the rear of this unit. • Refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device.
27 EXTERNAL DEVICES 2 Select a device you want to connect. 3 • For available devices... 1 Enter the specific PIN code of the device to the unit. Refer to the instructions supplied with the device to check the PIN code. 2 Use the Bluetooth device to connect.
28 • Select “Delete,” then confirm the selection. You can set the unit to connect the Bluetooth device automatically when the unit is turned on. (See “ Auto Connect ” on page 47.) Using the Bluetooth cellular phone 1 Select “BT-PHONE.” 2 Enter Bluetooth menu.
29 EXTERNAL DEVICES Making a call You can make a call using one of the Dial Menu items. • When is shown on the display, you can move back to the previous screen by pressing number button 3. 1 Select “BT-PHONE.” 2 Enter setting menu. 3 Select “Dial Menu.
30 2 Select a phone number. You can also enter a new phone number (see also “How to enter phone number” on page 29) to store. 3 Select a preset number to store. To call a preset number While in Bluetooth phone.... • Refer also to pages 27 and 28 for connecting/ disconnecting/deleting a registered device.
31 EXTERNAL DEVICES Listening to the CD changer It is recommended to use a JVC MP3-compatible CD changer with your unit. You can connect a CD changer to the CD changer jack on the rear of the unit. • You can only play conventional CDs (including CD Text) and MP3 discs.
32 Listening to the iPod You can connect an Apple iPod using the following cable or adapter: To: Cable or adapter: Connect to: Listen to the music USB 2.
33 EXTERNAL DEVICES [Press] Go to the next or previous track [Hold] Fast-forward or reverse the track during playback [Hold] Enter main menu [Press] Pause/resume playback. Selecting a track from the menu 1 Enter the main menu. 2 Select the desired menu.
34 2 Select the desired item. If the selected item has another layer, you will enter the layer. Repeat this step until the desired track is played. To select a track from Search Mode 1 Enter Search Mode menu. 2 Select an menu item. • Selecting Shuffle Songs starts playback.
35 EXTERNAL DEVICES Selecting a track from the menu 1 Enter the main menu. 2 Select the desired menu. Playlists Ô Artists Ô Albums Ô Songs Ô Genres Ô Composers 3 Confirm the selection. • By holding 4 / ¢ , you can fast skip during song search in the main menu.
36 Listening to the other external components You can connect an external component to: • CD changer jack on the rear of this unit using the following adapters: – Line Input Adapter , KS-U57 – AUX Input Adapter , KS-U58 Preparation: Make sure “Ext In” is selected for the external input setting, see page 42.
37 EXTERNAL DEVICES Connecting an external component to the AV-IN input jack * Portable Video/Audio player of this pin-allocation can be connected: Portable Video/Audio player * AV mini plug cable (supplied) 1234 Audio (R) GND Video Audio (L) Camcorder Video GND Audio (R) Audio (L) iPod, etc.
38 Adjusting the sound You can adjust the sound characteristics to your preference. • When is shown on the display, you can move back to the previous screen by pressing number button 3 or 6. 1 2 • For “EQ” setting, see above. 3 Adjust the selected setting item.
39 SETTINGS • 55Hz: Frequencies higher than 55 Hz are cut off. • 85Hz: Frequencies higher than 85 Hz are cut off. • 120Hz: Frequencies higher than 120 Hz are cut off. 3 Turn the control dial to adjust the subwoofer output level. [0 to 8] 4 Press number button 1 ( ) to move to another setting level.
40 4 Adjust the selected PSM item. 5 Repeat steps 2 – 4 to adjust other PSM items if necessary. 6 Finish the procedure. You can change PSM (Preferred Setting Mode) items listed in the table below and on pages 41 and 42. 1 Enter the PSM settings. 2 Select a PSM category.
41 SETTINGS Continued on the next page Category Indication Item ( : Initial) Setting, [reference page] CLOCK Clock Hr Hour adjustment 1 – 12AM/ 1 – 12PM (0 – 23) : Initial: 1 (1:00AM), [7]. Clock Min Minute adjustment 00 – 59 : Initial: 00 (1:00AM), [7].
42 Category Indication Item ( : Initial) Setting, [reference page] TUNER IF Band Intermediate frequency band • Auto • Wide : Increases the tuner selectivity to reduce interference noises between adjacent stations.
43 SETTINGS Continued on the next page Changing the display color You can select your favorite display color for each source (or all sources). • When is shown on the display, you can move back to the previous screen by pressing number button 3 or 6.
44 Creating your own color—User Color You can create your own colors—“Day Color” or “NightColor.” 1 Follow steps 1 to 3 on page 40. • In step 2 , select “COLOR.” • In step 3 , select “Color Set.” 2 Select “Day Color” or “NightColor.
45 SETTINGS Continued on the next page Disc setup menu These operations are possible on the monitor using the remote controller. 1 Enter the disc setup menu while stop. 2 Select a menu. 3 Select an item you want to set up. • To cancel pop-up menu, press RETURN.
46 Menu Item Setting PICTURE OSD POSITION Select the on-screen bar position on the monitor. • 1 : Higher position • 2 : Lower position (Guidance below the disc setup menu will disappear.) AUDIO DIGITAL AUDIO OUTPUT Select the signal format to be emitted through the DIGITAL OUT (Optical) terminal.
47 SETTINGS Bluetooth settings Setting menu ( : Initial) Auto Connect When the unit is turned on, the connection is established automatically with... Off: No Bluetooth device. Last: The last connected Bluetooth device. Order: The available registered Bluetooth device found at first.
48 SETTINGS You can assign titles to 30 station frequencies (FM and AM) using 10 characters (maximum) for each title. • When is shown on the display, you can move back to the previous screen by pressing number button 3. 1 Select “TUNER.” 2 Show the title entry screen.
49 REFERENCES How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
50 More about this unit Disc operations General • In this manual, words “track” and “file” are interchangeably used. • This unit can only play back audio CD (CD-DA) files if different type of files are recorded in the same disc. Inserting a disc • When a disc is inserted upside down, “Please Eject” appears on the display.
51 REFERENCES Continued on the next page Playing DVD-VR files • For details about DVD-VR format and playlist, refer to the instructions supplied with the recording equipment.
52 • Connecting condition may vary depending on the circumstances around you. • When the unit is turned off, the device is disconnected. appears when the connection is established. Appears when the Bluetooth phone is connected. Appears when the Bluetooth audio player is connected.
53 REFERENCES Continued on the next page • iPod shuffle and iPhone cannot be used with this unit. • You can control the iPod from this unit when “JVC” or “ ” appears on the iPod display after connection. • The song order displayed on the selection menu of this unit may differ from that of the iPod.
54 About sounds reproduced through the rear terminals • Through the analog terminals (Speaker out/ LINE OUT): 2-channel signal is emitted. When playing a multi-channel encoded disc, multi-channel signals are downmixed. DTS sound cannot be reproduced.
55 REFERENCES • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. • “DTS” and “DTS Digital Out” are registered trademarks of DTS, Inc. • “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation registered in the US, Japan and other countries.
56 Output signals through the DIGITAL OUT terminal Output signals are different depending on the “DIGITAL AUDIO OUTPUT” setting on the setup menu (see page 46).
57 REFERENCES Language codes Code Language Code Language Code Language Code Language Code Language AA Afar FA Persian KK Kazakh NO Norwegian ST Sesotho AB Abkhazian FI Finnish KL Greenlandic OC Occita.
58 Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptom Remedy/Cause General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections.
59 REFERENCES Symptom Remedy/Cause DivX/MPEG Video/MP3/WMA/WAV • Disc cannot be played back. • Change the disc. • Record the tracks using a compliant application in the appropriate discs (see page 6). • Add the extension code <.divx>, <.
60 Symptom Remedy/Cause USB device • “No File” flashes on the display. • “No USB” appears on the display. Connect a USB device that contains tracks encoded in an appropriate format. • “Not Support” appears on the display and track skips.
61 REFERENCES Symptom Remedy/Cause Bluetooth ® • The sound is interrupted or skipped during playback of a Bluetooth audio player. • Reduce the distance between the unit and the Bluetooth audio player. • Turn off, then turn on the unit. • When the sound is not yet restored: Connect the player again.
62 Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
63 REFERENCES DVD/CD PLAYER SECTION Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: DVD, fs=48 kHz/96 kHz: 16 Hz to 22 000 Hz CD, fs=44.
© 2008 Victor Company of Japan, Limited EN 0108DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Rear_KD-DV7406_005A_f.
An important point after buying a device JVC KD-DV7405 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC KD-DV7405 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC KD-DV7405 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC KD-DV7405 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC KD-DV7405 will certainly help you make a decision on the purchase.
If you already are a holder of JVC KD-DV7405, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC KD-DV7405.
However, one of the most important roles played by the user manual is to help in solving problems with JVC KD-DV7405. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC KD-DV7405 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
