Instruction/ maintenance manual of the product KD-DV6108 JVC
Go to page of 54
ENGLISH DVD/CD RECEIVER KD-DV6108 For canceling the display demonstration, see page 11. INSTRUCTIONS GET0380-001A [UL] KD-DV6108 Cover_DV6108[UL]f.indd 2 Cover_DV6108[UL]f.
2 ENGLISH How to forcibly eject a disc If a disc cannot be recognized by the unit or cannot be ejected, ejects the disc as follows. “PLEASE” and “EJECT” appear alternately on the display. • If this does not work, reset your unit. • Be careful not to drop the disc when it ejects.
3 ENGLISH WARNINGS: • DO NOT install any unit in locations where; – it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident. – it may obstruct the operation of safety devices such as air bags, as this may result in a fatal accident.
4 ENGLISH How to read this manual The following methods are used to make the explanations simple and easy-to-understand: • Some related tips and notes are explained in “More about this unit” (see pages 46 – 49). • Button operations are mainly explained with the illustrations as follows: Press briefly.
5 ENGLISH Other disc operations ..................... 29 Basic operations ..................................... 29 Changing the display information ......... 30 Selecting the playback modes ................ 31 Dual Zone operations ....................
6 ENGLISH Introduction — Playable discs Discs you can play You can play back the following discs (12 cm and 8 cm) on this unit: • DVD V id e o : Recorded in either PAL or NTSC color system with Region Code “ 3 ” (see below). – DVD-R/DVD-RW recorded in the DVD- Video format can also be played (see page 46).
7 ENGLISH Control panel 1 5 (up) / ∞ (down) buttons • Function as Play / Stop buttons for DVD and VCDs. 2 E EQ (equalizer) button 3 D DISP (display) button 4 S SEL (select) button 5 • Control di.
8 ENGLISH Remote controller — RM-RK230 Installing the lithium coin battery (CR2025) Before using the remote controller: • Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between. • Do not expose the remote sensor to strong light (direct sunlight or artificial lighting).
9 ENGLISH 4 BAND button • Selects the FM/AM bands. 5 TOP M (menu) button* 2 • Display the DVD and VCD* 3 disc menu. 6 DUAL button • Activate and deactivate Dual Zone. 7 VOL + / – buttons • Adjusts the volume level. • Also function as 2nd VOL +/ – buttons when pressed with SHIFT button.
10 ENGLISH ~ Ÿ You cannot select some sources if they are not ready. ! For FM/AM tuner only ⁄ Adjust the volume. Volume level appears. Volume level indicator @ Adjust the sound as you want. (See pages 33 and 34.) To drop the volume in a moment (ATT) To restore the sound, press it again.
11 ENGLISH Canceling the display demonstrations If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON] — see page 35. 1 2 3 4 Finish the procedure. To activate the display demonstration In step 3 above... Setting the clock 1 2 Set the hour and minute.
12 ENGLISH To tune in to a station manually In step ! on the left column... 1 2 Select the desired station frequencies. Radio operations Listening to the radio ~ Ÿ Selected band appears. Lights up when receiving an FM stereo broadcast with sufficient signal strength.
13 ENGLISH When an FM stereo broadcast is hard to receive 1 2 Lights up when monaural mode is activated. Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure. “ MONO OFF ” appears and the MO indicator goes off.
14 ENGLISH Manual presetting Ex.: Storing FM station of 92.5 MHz into the preset number 1 of the FM1 band. 1 2 3 4 Preset number flashes for a while. To check the current clock time while listening to an FM or AM station * If no title is assigned to a station, “NO NAME” appears.
15 ENGLISH Before performing any operations, make sure the following.... • To watch the playback pictures, select the an appropriate video system (NTSC or PAL) to match it to the connected monitor. (See page 36.) • Turn on the monitor for playing a DVD or VCD.
16 ENGLISH • When inserting a DVD disc: • When inserting an MP3/WMA disc: * 1 Either the MP3 or WMA indicator lights up depending on the detected file.
17 ENGLISH Basic operations Operations Display indication and/or next operation To stop play temporarily “PAUSE” illuminates on the display. A still picture appears. A Frame by frame playback B Slow motion playback • No sound comes out during Slow Motion Playback.
18 ENGLISH To locate a particular title/chapter/ track directly • For DVD: During play or pause — select a chapter. During stop — select a title. • For VCD: While PBC (see page 20) is not in use. • For MP3/WMA: Select a track within the same folder.
19 ENGLISH DVD/VCD special functions Selecting subtitles You can select the language of the subtitle to be shown on the monitor. • You can set the initial subtitle language using the setup menu (see page 27).
20 ENGLISH Canceling the PBC playback 1 2 Select a track to start normal playback using the number buttons (see page 9). To resume the PBC function Zoom in 1 2 Move the zoomed-in portion.
21 ENGLISH About the On-Screen Bar You can check the disc information and use some functions through the on-screen bar. • For audio CD, CD Text, and MP3/WMA disc you can also use the control screen and list screen (see pages 24 and 25).
22 ENGLISH Basic on-screen bar operations 1 Display the on-screen bar. • For DVD/VCD: • For other discs: 2 Select an item. 3 Make a selection. • If pop-up menu appears.
23 ENGLISH INTRO Intro play VCD (while PBC is not in use): (Canceled) INTRO MP3/WMA: INTRO TRACK INTRO FOLDER (Canceled) CD Text/audio CD: INTRO TRACK (Canceled) RANDOM Random play VCD (while PBC is n.
24 ENGLISH To select a folder or track 1 Select “ Folder ” column or “ Track ” column on the control screen. 2 Select a folder or track. CD Text/audio CD control screen 1 Elapsed playing time .
25 ENGLISH For MP3/WMA: While stop.... 1 Display the folder list. Each time you press the button, the list screen comes on and goes off. 2 Select a folder on the list. The track list of the selected folder appears. To go back to the folder list 3 Select a track on the list.
26 ENGLISH You can store the initial disc playback status. • While playing, no change can be made on the setup menu. Basic setting procedure While stop... 1 2 Ex.: When selecting the “ AUDIO ” menu 3 Select an item you want to set up. Ex.: When selecting “ DOWN MIX ” 4 5 Select an option.
27 ENGLISH To be continued.... LANGUAGE menu Item Contents MENU LANGUA GE Select the initial disc menu language. AUDIO LANGU AGE Select the initial audio language. SUBTITLE Select the initial subtitle language or erase the subtitle (OFF). ON SCR EEN LANGUA GE Select the language for the Setup menu and some indications shown on the monitor.
28 ENGLISH AUDIO menu Item Contents DIGIT AL A UDIO OUTPUT Select the signal format to be emitted through the DIGITAL OUT (Optical) terminal on the rear. For details, see page 49. • PCM ONLY : Select this when connecting an amplifier or a decoder incompatible with Dolby Digital, DTS, MPEG Audio, or connecting to a recording device.
29 ENGLISH To be continued.... In this section, you can learn how to use the buttons on the control panel in order to operate the DVD/CD player. Basic operations To stop playback To start playback again To eject a disc To fast-forward or reverse the chapter/track Fast-forwards.
30 ENGLISH To go to a chapter/track quickly • For DVD: During play or pause. • For VCD: While PBC (see page 20) is not in use. • For MP3/WMA: Select a track within the same folder. 1 2 First time you press 5 or ∞ button, the chapter/track skips to the nearest higher or lower chapter/track with a number of multiple ten (ex.
31 ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play • For DVD: During play or pause.
32 ENGLISH Listening with headphones By connecting headphones to the 2nd AUDIO OUT plug on the rear, you can listen to the playback sound through the DVD/CD player while listening to another source through the speakers. You can activate Dual Zone while listening to any source.
33 ENGLISH Indication pattern for each sound mode: Sound adjustments Selecting preset sound modes You can select a preset sound mode suitable to the music genre. Ex.: When “ ROCK ” is selected HIP HOP POPS ROCK USER CLASSIC JAZZ 4 Adjust the level (–05 to +05).
34 ENGLISH Adjusting the sound You can adjust the sound characteristics to your preference. 1 Ex.: When “FAD” is selected 2 Indication pattern changes as you adjust the level. Indication To do: Range FAD* 2 (fader) Adjust the front and rear speaker balance.
35 ENGLISH General settings — PSM Basic procedure You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 2 Select a PSM item. Ex.: When you select “DIMMER” 3 Adjust the PSM item selected. 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary.
36 ENGLISH Indications Selectable settings, [reference page] SCROLL * 1 Scroll ONCE : [Initial]; Scrolls the disc information once. AU TO : Repeats scrolling (5-second intervals in between). OFF : Cancels. • Even if “ SCROLL ” is set to “ OFF, ” you can scroll the display by pressing D DISP for more than one second.
37 ENGLISH Assigning titles to the sources You can assign titles to station frequencies and CDs (both in this unit and in the CD changer). Sources Maximum number of characters FM/AM tuner Up to 8 char.
38 ENGLISH Detaching the control panel When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power.
39 ENGLISH Before connecting the CD changer • To prevent short circuits, it is recommended to disconnect the car battery’s negative terminal and make all electrical connections before connecting the CD changer. • When mounting this unit into your car, be sure to use the screws provided.
40 ENGLISH • When the current disc is an audio CD or a CD Text disc: To fast-forward or reverse the track Fast-forwards. Reverses. To go to the next or previous tracks To the following tracks. To the beginning of the current track, then the previous tracks.
41 ENGLISH To skip to a track quickly during play • For MP3 disc, you can skip a track within the same folder. Ex.: To select track 32 while playing track 6 1 2 First time you press 5 or ∞ button, the track skips to the nearest higher or lower track with a track number of multiple ten (ex.
42 ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play Ex.: When “TRK RPT” is selected while playing an MP3 disc Mode Plays repeatedly TRK RP T : The current track.
43 ENGLISH External component operations Playing an external component You can connect an external component to the LINE IN plug on the rear, and another to the AUX (auxiliary) input jack on the control panel.
44 ENGLISH To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.
45 ENGLISH Language codes Code Language Code Language Code Language AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DZ EL EO ET EU FA FI FJ FO FY GA GD GL GN GU HA HI HR HU HY IA IE Afar A.
46 ENGLISH More about this unit Basic operations Turning on the power • By pressing SOURCE on the unit, you can also turn on the power. Selecting the sources • When no disc is loaded in the unit, “ DISC ” cannot be selected. • Without connecting to the CD changer, “ CD-CH ” cannot be selected.
47 ENGLISH To be continued.... • Do not use the following DVD-R/DVD-RW or CD-R/CD-RW: – Discs with stickers, labels, or protective seal stuck to the surface. – Discs on which labels can be directly printed by an ink jet printer. Using these discs under high temperatures or high humidities may cause malfunctions or damages to discs.
48 ENGLISH • While playing (or pausing), you cannot change these languages. After you change any of these language settings, eject the disc and insert it (or another disc) again so that your setting takes effect.
49 ENGLISH About sounds reproduced through the rear terminals • Through the analog terminals (Speaker out/LINE OUT/2nd AUDIO OUT): 2-channel signal is emitted. When playing a multi-channel encoded disc, multi-channel signals are downmixed. (AUDIO — DOWN MIX: see page 28.
50 ENGLISH Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies General • Sound cannot be heard from the speakers. The volume level is set to the minimum level.
51 ENGLISH To be continued.... Symptoms Causes Remedies Disc playback • Sound and picture are sometimes interrupted or distorted. You are driving on rough roads. Stop playback while driving on rough roads. Disc is scratched. Change the disc. Connections are incorrect.
52 ENGLISH Symptoms Causes Remedies MP3/WMA playback • Noise is generated. The track played back is not an MP3/WMA file (although it has the extension code <.mp3> or <.wma>). Skip to another track or change the disc. (Do not add the extension code <.
53 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.
© 2005 Victor Company of Japan, Limited EN, CT 0905DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Rear_DV6108[UL]f.
An important point after buying a device JVC KD-DV6108 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC KD-DV6108 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC KD-DV6108 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC KD-DV6108 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC KD-DV6108 will certainly help you make a decision on the purchase.
If you already are a holder of JVC KD-DV6108, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC KD-DV6108.
However, one of the most important roles played by the user manual is to help in solving problems with JVC KD-DV6108. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC KD-DV6108 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
