Instruction/ maintenance manual of the product HR-XVC19BUS JVC
Go to page of 40
LPT1086-001A D VD PLA YER & VIDEO CASSETTE RECORDER HR-XVC18B US HR-XVC19SUS INSTR UCTIONS Cover_HR-XVC18&19US.indd 3 Cover_HR-XVC18&19US.indd 3 05.
2 This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclo- sure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
3 1 . Read these instructions. - All these safety and operating instructions should be read before the product is operated. 2. Keep these instructions. - The safety, operating and use instructions should be retained for future ref- erence. 3. Heed all warnings.
4 Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Moisture Condensation . . . . . . . . . . . . . . .5 Symbols Used in this Manual . . . . . . . . . .5 About the Symbol Display . . . . . . . . . . .5 Notes on Discs . . .
5 To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference. This manual provides information on the operation and maintenance of your DVD+VCR. Should the unit require service, contact an Authorized Service Center.
6 T ypes of Playable Discs DVD (8 cm / 12 cm disc) Video CD (VCD) (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit plays DVD-R, DVD+R, DVD- RW, DVD+RW, and CD-R / CD-RW that contains audio titles, and/or JPEG files.
7 Introduction Regional Code This DVD+VCR is designed and manufactured for playback of region “1” encoded DVD software. This unit can play only DVD discs labeled “1” or “ALL”. Notes on Regional Codes • Most DVD discs have a globe with one or more numbers in it clearly visible on the cover.
8 a Disc Tray (DVD deck) Insert a disc here. b Cassette Compartment (VCR deck) Insert a video cassette here. c POWER 1/: Switches the DVD+VCR ON and OFF. d REW ( m m ) - DVD: Skip to beginning of current chapter or track, press twice in quick successions to go to previous chapter or track.
9 Introduction 0-9 Selects numbered options in a menu. bBvV Selects menu options. Fast forwards picture search through 30 seconds of recording. AUX Selects the VCR deck ’ s source (Tuner, LINE 1, or LINE 2). A.MONITOR Selects an audio language (DVD) or an audio channel (VCD).
10 a ANT.IN Connect the VHF/UHF/CATV antenna to this ter- minal. b VCR IN LINE 1 (VIDEO/AUDIO (Left/Right)) Connect the audio/video output of an external source (Audio system, TV/Monitor, VCR, Camcorder). c DVD/VCR OUT (VIDEO/AUDIO (Left/Right)) Connect to a TV with video and audio inputs.
11 Preparation Connecting an Connecting an Antenna Antenna or Cable TV or Cable TV a a Antenna: Disconnect the antenna from the rear of the TV and identify the antenna cable. If it is a round 75 ohm coaxial cable connect it directly to the jack marked ANT.
12 RF coaxial connection Connect the RF.OUT jack on the DVD+VCR to the antenna in jack on the TV using the supplied 75-ohm Coaxial Cable (R) . How to set the DVD+VCR ’ s RF output channel 1. When the DVD+VCR is turned off, press and hold both CH - and CH + on the front panel for more than five seconds.
13 Preparation Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equipped with a multi- channel decoder (Dolby Digital ™ , MPEG 2, or DTS) 1. Connect the DVD+VCR ’ s DIGITAL AUDIO OUT jacks (COAXIAL X ) to the corresponding in jack on your amplifier.
14 Initial Settings - VCR Initial Settings - VCR By using the VCR Setup menu, you can make various adjustments to items such as clock set- ting, and timer recordings. Your DVD+VCR allows Remote Control adjust- ment of several features. General Operation 1.
15 Preparation TUNING This DVD+VCR is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125. Auto Channel Programming 1. Choose the SOURCE SELECT option, then use b / B to select TUNER.
16 Initial Settings - DVD Initial Settings - DVD By using the DVD Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subti- tles and the Setup menu, among other things. For details on each Setup menu item, see pages 16 to 19.
17 Preparation DISPLA Y TV Aspect 4:3 : Select when a standard 4:3 TV is connected. 16:9 : Select when a 16:9 wide TV is connected. Display Mode Display Mode setting works only when the TV Aspect mode is set to “ 4:3 ” . Letterbox: Displays a wide picture with bands on the upper and lower portions of the screen.
18 AUDIO Each DVD disc has a variety of audio output options. Set this unit ’ s AUDIO options according to the type of audio system you use. Dolby Digital / DTS / MPEG Bitstream: Select “ Bitstream ” if you connect the DVD+VCR ’ s DIGITAL AUDIO OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder.
19 Preparation OTHERS The Auto Play, and B.L.E. settings can be changed. PBC Set Playback Control (PBC) to On or Off. On: Video CDs with PBC are played according to the PBC. Off: Video CDs with PBC are played the same way as Audio CDs. Auto Play You can set up the DVD+VCR so a DVD disc automatically starts playing whenever the DVD is inserted.
20 This chapter describes how to operate the VCR and DVD. VCR T VCR T ape Playback ape Playback Press the VCR button to select the device to be operated.
21 Operation Slow Motion 1. While in still mode, press FF ( M ). The tape is played at a speed 1/19 times slower than the normal speed. 2. Use CH -/+ on the Remote Control if neces- sary to adjust the tracking. 3. To return to the normal speed, press PLAY ( N ).
22 VCR T VCR T ape Recording ape Recording Basic Instructions 1. Turn on the DVD+VCR and TV. 2. Tune the TV to the DVD+VCR output channel (CH 3 or 4) or if a direct VIDEO/AUDIO con- nection is made between the DVD+VCR and the TV, set the TV ’ s source selector to VIDEO.
23 Operation Channel: Select a TV channel, LINE1 or LINE2. If you have CABLE TV and use a cable box (converter) you must set the channel to match the cable box output channel (usually CH 3 or 4). Change channels on the cable box instead of with the DVD+VCR.
24 Instant Timer Recording With this feature you can record for a preset length without using the program timer. 1. Turn on DVD+VCR and the TV. 2. Be sure the TV is tuned to the DVD+VCR out- put channel (CH 3 or 4). If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV ’ s source selector to VIDEO.
25 Cop ying from D VD to VCR You can copy the contents of a DVD to a VHS tape. 1. Insert the disc you wish to copy into the DVD deck and close the disc tray. 2. Insert a blank VHS video tape into the VCR deck. 3. Find the place on the DVD from which you want to start dubbing using the PLAY, FF, REW and PAUSE functions.
26 Additional VCR Information Additional VCR Information • During manual recording, timer recording, Instant Timer Recording, playback, or fast for- ward modes, the DVD+VCR automatically starts rewinding the tape at the end of the tape. The cassette stops at the beginning of the tape and is ejected.
27 Operation Playing a DVD or V Playing a DVD or V ideo CD ideo CD Playback Setup 1. Turn on the TV and select the video input source connected to the DVD+VCR. 2. Turn on the audio system (if applicable) and select the input source connected to the DVD+VCR.
28 Still Picture and Frame-by-Frame Playback 1. Press PAUSE ( X ) during playback. Advance the picture frame-by-frame by pressing PAUSE ( X ) repeatedly. 2. To exit still motion mode, press PLAY( N ). Search 1. Press REW ( m ) or FF ( M ) during playback.
29 Operation Changing the Audio Channel Press A.MONITOR repeatedly during playback to hear a different audio channel (Stereo, Left, Right). Last Scene Memory This player memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the player or switch off the player.
30 On-Screen Display - DVD On-Screen Display - DVD You can display the general playback status on the TV screen. Some items can be changed using the menu. To use the on-screen display: 1. Press DISPLAY during playback. 2. Press v / V to select an item.
31 Operation Playing an Playing an Audio CD Disc Audio CD Disc Audio CD Once you insert an Audio CD a menu appears on the TV screen. Press v / V to select a track then press PLAY ( N ) or ENTER / OK and playback starts. Audio CD Disc Features Audio CD Disc Features Pause 1.
32 Search 1. Press REW ( m ) or FF ( M ) during playback. 2. Press REW ( m ) or FF ( M ) repeatedly to select the required speed: X2, X4 and X8 backward or forward. 3. To exit SEARCH mode, press PLAY ( N ). Random 1. Press RANDOM during playback. Random Playback begins immediately and “ Random ” appears on the menu screen.
33 Operation Repeat Programmed Tracks 1. Press REPEAT when playing a disc. The repeat icon appears. 2. Press REPEAT to select a desired repeat mode. • Track: repeats the current track • All: repeats all the tracks on programmed list. • Off (No display): does not play repeatedly.
34 V V iewing a JPEG Disc iewing a JPEG Disc Using this DVD+VCR you can view discs with JPEG files. 1. Insert a disc and close the tray. The PHOTO menu appears on the TV screen. 2. Press v / V to select a folder, and press ENTER / OK. A list of files in the folder appears.
Reference Area Code Afghanistan AF Argentina AR Australia AU Austria AT Belgium BE Bhutan BT Bolivia BO Brazil BR Cambodia KH Canada CA Chile CL China CN Colombia CO Congo CG Costa Rica CR Croatia HR .
36 T T roubleshooting roubleshooting Symptom No power. The power is on, but the DVD+VCR does not work. No picture. No sound. The playback picture is poor. The “ PROGRESSIVE SCAN MODE ” message remains to be displayed. Cause The power cord is disconnected.
37 Reference Symptom The DVD+VCR does not start playback. Video tape cannot be inserted. No Hi-Fi sound The Remote Control does not work properly. Camcorder image is not shown. Camcorder image via AV input to DVD+VCR is not shown on TV screen. Timer recording is not possible.
38 General Power requirements 120 V, 60 Hz Power consumption 16 W ✬❖ O ❉◗ ON ✭ ✴✲✼ ✬❘❙❅ N ❈❆ ❧ o ❝❞✭ Dimensions (approx.) 16.9" X 3.1" X 10.4" (430 X 78.5 X 265 mm) (w x h x d) Weight (approx.
39 Reference W arranty (Only in U.S.A.) H ◗❇✵✼❆❚❘✵✽❘❚❘✸✲✵✤ ✤ ✴✹✲✺✲✵✸✤ ✤ ✵✵✾✴✻✤ ❅ M ✤✤ y ✷ ✽.
US HR-XVC18BUS/HR-XVC19SUS Printed in Indonesia 0605STH-MW -OT Cover_HR-XVC18&19US.indd 2 Cover_HR-XVC18&19US.indd 2 05.6.10 2:00:53 PM 05.6.10 2:00:53 PM.
An important point after buying a device JVC HR-XVC19BUS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC HR-XVC19BUS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC HR-XVC19BUS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC HR-XVC19BUS you will learn all the available features of the product, as well as information on its operation. The information that you get JVC HR-XVC19BUS will certainly help you make a decision on the purchase.
If you already are a holder of JVC HR-XVC19BUS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC HR-XVC19BUS.
However, one of the most important roles played by the user manual is to help in solving problems with JVC HR-XVC19BUS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC HR-XVC19BUS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
