Instruction/ maintenance manual of the product HR-XVC16BU JVC
Go to page of 39
HR-XVC16B U HR-XVC17SU D VD PLA YER & VIDEO CASSETTE RECORDER INSTR UCTIONS LPT1 127-001A EN.
2 This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
3 1. Read these instructions. - All these safety and operating instructions should be read before the product is operated. 2. Keep these instructions. - The safety , operating and use instructions should be retained for future reference. 3. Heed all warnings.
4 Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Moisture Condensation . . . . . . . . . . . . . . . . . .5 Symbols Used in this Manual . . . . . . . . . . . .5 About the Symbol Display . . . . . . . . . . . . .5 Notes on Discs .
5 To ensure proper use of this product, please read this owner ’s manual carefully and retain for future reference. This manual provides information on the operation and maintenance of your DVD+VCR. Should the unit require service, contact an Authorized Service Center .
6 T ypes of Play able Discs DVD (8 cm / 12 cm disc) V ideo CD (VCD) (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit plays DVD-R, DVD+R, DVD-RW , DVD+RW , and CD-R / CD-RW that contains audio titles, and/or JPEG files.
7 Regional code This DVD+VCR is designed and manufactured for playback of region “1” encoded DVD software. This unit can play only DVD discs labeled “1” or “ALL”. Notes on Regional Codes • Most DVD discs have a globe with one or more numbers in it clearly visible on the cover .
8 a Disc T ray (DVD deck) Insert a disc here. b Cassette Compartment (VCR deck) Insert a video cassette here. c PO WER 1/: Switches the DVD+VCR ON and OFF . d REW ( m m ) - D VD: Skip to beginning of current chapter or track, press twice in quick successions to go to previous chapter or track.
9 Introduction 0-9 Selects numbered options in a menu. bBvV Selects menu options. Fast forwards picture search through 30 seconds of recording. AU X Selects the VCR deck’s source (T uner , LINE 1, or LINE 2). A.MONIT OR Selects an audio language (DVD) or an audio channel (VCD).
10 a ANT .IN Connect the VHF/UHF/CA TV antenna to this terminal. b VCR IN LINE 1 (VIDEO/A UDIO (Left/Right)) Connect the audio/video output of an external source (Audio system, TV/Monitor , VCR, Camcorder). c D VD/VCR OUT (VIDEO/A UDIO (Left/Right)) Connect to a TV with video and audio inputs.
11 Preparation Connecting an Antenna Connecting an Antenna or Cab or Cab le le TV TV a a Antenna : Disconnect the antenna from the rear of the TV and identify the antenna cable. If it is a round 75 ohm coaxial cable connect it directly to the jack marked ANT .
12 RF coaxial connection Connect the RF .OUT jack on the DVD+VCR to the antenna in jack on the TV using the supplied 75-ohm Coaxial Cable (R) . How to set the D VD+VCR’ s RF output c hannel 1. When the DVD+VCR is turned off, press and hold both CH - and CH + on the front panel for more than five seconds.
13 Preparation Connecting to an amplifier equipped with two c hannel digital stereo (PCM) or to an A udio/Video receiver equipped with a multi-c hannel decoder (Dolby Digital™, MPEG 2, or DTS) 1. Connect the DVD+VCR’s DIGIT AL AUDIO OUT jacks (COAXIAL X ) to the corresponding in jack on your amplifier .
14 Initial Settings - Initial Settings - VCR VCR By using the VCR Setup menu, you can make various adjustments to items such as clock setting, and timer recordings. Y our DVD+VCR allows Remote Control adjustment of several features. General Operation 1.
15 Preparation TUNING This DVD+VCR is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CA TV channels 1-125. Au to Channel Programming 1. Choose the SOURCE SELECT option, then use b / B to select TUNER.
16 Initial Settings - D Initial Settings - D VD VD By using the DVD Setup menu, you can make vari- ous adjustments to items such as picture and sound. Y ou can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 16 to 19.
17 Preparation DISPLA Y TV Aspect 4:3 : Select when a standard 4:3 TV is connected. 16:9 : Select when a 16:9 wide TV is connected. Display Mode Display Mode setting works only when the TV Aspect mode is set to “4:3”. Letterbo x: Displays a wide picture with bands on the upper and lower portions of the screen.
18 A UDIO Each DVD disc has a variety of audio output options. Set this unit’s AUDIO options according to the type of audio system you use. Dolby Digital / DTS / MPEG Bitstream: Select “Bitstream” if you connect the DVD+VCR’s DIGIT AL AUDIO OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder .
19 Preparation O THERS The Auto Play , and B.L.E. settings can be changed. PBC Set Playback Control (PBC) to On or Off. On: V ideo CDs with PBC are played according to the PBC.
20 This chapter describes how to operate the VCR and DVD. VCR VCR T T ape Pla ape Pla ybac ybac k k Press the VCR button to select the device to be operated.
21 Operation Slow Motion 1. While in still mode, press FF ( M ). The tape is played at a speed 1/19 times slower than the normal speed. 2. Use CH -/+ on the Remote Control if necessary to adjust the tracking. 3. T o return to the normal speed, press PLA Y ( N ).
22 VCR VCR T T ape Recor ape Recor ding ding Basic Instructions 1. T urn on the DVD+VCR and TV . 2. T une the TV to the DVD+VCR output channel (CH 3 or 4) or if a direct VIDEO/AUDIO connec- tion is made between the DVD+VCR and the TV , set the TV’ s source selector to VIDEO.
23 Operation Channel: Select a TV channel, LINE1 or LINE2. If you have CABLE TV and use a cable box (converter) you must set the channel to match the cable box output channel (usually CH 3 or 4). Change channels on the cable box instead of with the DVD+VCR.
24 Instant Timer Recor ding With this feature you can record for a preset length without using the program timer . 1. T urn on DVD+VCR and the TV . 2. Be sure the TV is tuned to the DVD+VCR output channel (CH 3 or 4). If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV , set the TV’s source selector to VIDEO.
25 Operation Copying fr om D VD to VCR Y ou can copy the contents of a DVD to a VHS tape. 1. Insert the disc you wish to copy into the DVD deck and close the disc tray . 2. Insert a blank VHS video tape into the VCR deck. 3. Find the place on the DVD from which you want to start dubbing using the PLA Y , FF , REW and P AUSE functions.
26 Ad Ad ditional ditional VCR Inf VCR Inf ormation ormation • During manual recording, timer recording, Instant T imer Recording, playback, or fast forward modes, the DVD+VCR automatically starts rewinding the tape at the end of the tape. The cassette stops at the beginning of the tape and is ejected.
27 Operation Pla Pla ying a D ying a D VD or VD or Video CD Video CD Playbac k Setup 1. T urn on the TV and select the video input source connected to the DVD+VCR. 2. T urn on the audio system (if applicable) and select the input source connected to the DVD+VCR.
28 Still Picture and Frame-by-Frame Pla yback 1. Press P AUSE ( X ) during playback. Advance the picture frame-by-frame by pressing P AUSE ( X ) repeatedly . 2. T o exit still motion mode, press PLA Y ( N ). Searc h 1. Press REW ( m ) or FF ( M ) during playback.
Operation 29 Changing the A udio Channel Press A.MONITOR repeatedly during playback to hear a different audio channel (Stereo, Left, Right). Last Scene Memory This player memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the player or switch off the player .
30 On-Screen Displa On-Screen Displa y - D y - D VD VD Y ou can display the general playback status on the TV screen. Some items can be changed using the menu. T o use the on-screen display: 1. Press DISPLA Y during playback. 2. Press v / V to select an item.
31 Operation Pla Pla ying an A ying an A udio CD or MP3 udio CD or MP3 Disc Disc A udio CD Once you insert an Audio CD a menu appears on the TV screen. Press v / V to select a track then press PLA Y ( N ) or ENTER / OK and playback starts. MP3 1. Press v / V to select a folder, and press ENTER to see the folder contents.
32 Searc h 1. Press REW ( m ) or FF ( M ) during playback. 2. Press REW ( m ) or FF ( M ) repeatedly to select the required speed: X2, X4 and X8 backward or forward. 3. T o exit SEARCH mode, press PLA Y ( N ). Random 1. Press RANDOM during playback. Random Playback begins immediately and “Random” appears on the menu screen.
33 Operation Repeat Programmed T racks 1. Press REPEA T when playing a disc. The repeat icon appears. 2. Press REPEA T to select a desired repeat mode. • T rack: repeats the current track • All: repeats all the tracks on programmed list. • Off(No display): does not play repeatedly .
34 Vie Vie wing a JPEG Disc wing a JPEG Disc Using this DVD+VCR you can view discs with JPEG files. 1. Insert a disc and close the tray . The PHOTO menu appears on the TV screen. 2. Press v / V to select a folder, and press ENTER / OK. A list of files in the folder appears.
35 Reference Reference Area Code Afghanistan AF Argentina AR Australia AU Austria A T Belgium BE Bhutan BT Bolivia BO Brazil BR Cambodia KH Canada CA Chile CL China CN Colombia CO Congo CG Costa Rica .
36 T T r r oub oub leshooting leshooting Symptom No power . The power is on, but the DVD+VCR does not work. No picture. No sound. The playback picture is poor . The “PROGRESSIVE SCAN MODE” message remains to be displayed. Cause The power cord is disconnected.
37 Reference Symptom The DVD+VCR does not start playback. V ideo tape cannot be inserted. No Hi-Fi sound The Remote Control does not work properly . Camcorder image is not shown. Camcorder image via AV input to DVD+VCR is not shown on TV screen. T imer recording is not possible.
38 General Power requirements 120 V , 60 Hz Power consumption 16 W (POWER ON) 0.8 W (ST ANDBY mode) Dimensions (approx.) 16.9" X 3.1" X 10.4" (430 X 78.
UC Printed in Indonesia 0206MNH-LG-LG HR-XVC16BU/HR-XVC17SU P/NO : 3834RV0042F.
An important point after buying a device JVC HR-XVC16BU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC HR-XVC16BU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC HR-XVC16BU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC HR-XVC16BU you will learn all the available features of the product, as well as information on its operation. The information that you get JVC HR-XVC16BU will certainly help you make a decision on the purchase.
If you already are a holder of JVC HR-XVC16BU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC HR-XVC16BU.
However, one of the most important roles played by the user manual is to help in solving problems with JVC HR-XVC16BU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC HR-XVC16BU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
