Instruction/ maintenance manual of the product HR-XVC11B JVC
Go to page of 36
HR-XVC1 1B HR-XVC12S DVD PLA YER & VIDEO CASSETTE RECORDER INSTRUCTIONS L VT1866-001A For customer use: Enter below the Model No. and Serial No. which are located on the rear of cabinet. Retain this information for future reference. Model No. Serial No.
2 This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
3 1. Read these instructions. - All these safety and operating instructions should be read before the product is operated. 2. Keep these instructions. - The safety , operating and use instructions should be retained for future reference. 3. Heed all warnings.
4 Contents Introduction . . . . . . . . . . . . . . . . . . . . . .5 Moisture Condensation . . . . . . . . . . . . . . . . . .5 Symbol Used in this Manual . . . . . . . . . . . . . .5 About the Symbol Display . . . . . . . . . . . . .5 Notes on Discs .
5 To ensure proper use of this product, please read this owner ’s manual carefully and retain it for future reference. This manual provides information on the operation and maintenance of your unit. Should the unit require service, contact an authorized service location.
6 T ypes of Playable Discs DVD (8 cm / 12 cm disc) V ideo CD (VCD) (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit plays DVD±R/RW , CD- R/RW and SVCD, Dual disc that contains audio titles, and/or JPEG files. This indicates a product feature that is capable of playing DVD-RW discs recorded with V ideo Recording format.
7 Introduction The DVD deck is selected. A disc is in the DVD deck. (Lights when a disc is in the DVD deck and Flashes when no disc.) Indicates when the Progressive scan is active. Indicates repeat mode. The unit is in timer recording or a timer recording is programmed (VCR part only).
8 a 1 1 / / I (POWER) : Switches unit ON and OFF . * : This button is not available. Z Z (OPEN/CLOSE) : Opens and closes the disc tray . DVD : Select the unit function mode to DVD. VCR : Select the unit function mode to VCR.
9 Introduction a VCR IN LINE 1 (VIDEO/AUDIO (Left/Right)) Connect the audio/video output of an external source (Cable/Satellite box, Audio system, TV/Monitor , VCR, Camcorder). b DVD/VCR OUT (VIDEO/AUDIO (Left/Right)) Connect to a TV with video and audio inputs.
10 Depending on your TV and other equipment there are various ways you can connect the player . Please refer to the manuals of your TV , VCR, stereo system or other devices as necessary for additional connection information. Notes: • The picture and sound of a nearby TV , VCR, or radio may be distorted during playback.
11 Cable/Satellite box Connection to unit To use T imer-Link Recording, connect the VCR IN LINE 1 jacks on the unit to the audio/video out jacks on your Cable/Satellite box, using the optional audio/video cables. (Refer to page 21 for “T imer-Link Recording”.
12 Connection to an Amplifier Y ou can only listen to DVD playback using COAXIAL (X) and AUDIO OUT (A2) connections. The VCR will still be heard through the DVD/VCR AUDIO OUT (A1) jack.
13 Preparation Initial Settings - VCR By using the VCR Setup menu, you can make various adjustments to items such as clock setting, and timer recordings. Y our unit allows remote control adjustment of several features. General Operation 1. Press VCR on the Remote Control.
14 Displaying Disc Information on-screen Y ou can display various information about the disc loaded on-screen. 1. Press DISPLA Y to show various playback information. The displayed items differ depending on the disc type or playing status. 2. Y ou can select an item by pressing v / V and change or select the setting by pressing b / B .
15 Preparation LANGUAGE Menu Language Select a language for the Setup menu and on-screen display . Disc Audio / Subtitle / Menu Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. Original – Refers to the original language in which the disc was recorded.
16 AUDIO Each DVD disc has a variety of audio output options. Set the player ’s AUDIO options according to the type of audio system you use. Dolby Digital / DTS / MPEG Bitstream – Select “Bitstream” if you connect this DVD player ’s DIGIT AL OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder .
17 Preparation Remote Control Function Remote Control A/B/C Code Switching The remote control is capable of controlling three JVC video units independently . Each of the units can respond to one of three codes (A, B or C). The remote control is preset to send C code signals because your unit is initially set to respond to C code signals.
18 This chapter describes how to operate the VCR and DVD. VCR T ape Playback Press the VCR button to select the device to be oper- ated. Basic Instructions 1. T urn on the TV . 2. Direct VIDEO/AUDIO connection is made between the unit and the TV , set the TV’s source selector to VIDEO.
19 Operation CM SKIP (Commercial Skip) This feature is useful for skipping commercials or short program segments. 1. Press in playback mode. The unit performs a fast forward picture search through 30 seconds of recording. 2. Press again to extend the search time by an addition 30 seconds.
20 Manual Timer Programming 1. Press SETUP MENU and the main menu appears. 2. Use v / V to choose the PROGRAM option and press ENTER (OK). If eight programs are already entered, the FULL Y PROGRAMMED message appears for a moment and then PROGRAM 1 appears on the TV screen.
21 T imer-Link Recording (External Timer Recording) If the external device such as Cable/Satellite box that is connected to this unit has the timer reservation function, this unit can record the input signal from external device via the timer LINE1 jack.
22 Copying from DVD to VCR Y ou can copy the contents of a DVD to a VHS tape. 1. Insert the disc you wish to copy into the DVD deck and close the disc tray . 2. Insert a blank VHS video tape into the VCR deck. 3. Find the place on the DVD from which you want to start dubbing using the PLA Y , FF , REW and P AUSE functions.
Operation 23 Additional VCR Information • During manual recording playback, or fast forward modes, the unit automatically starts rewinding the tape at the end of the tape. The cassette stops at the beginning of the tape and is ejected. • After you have finished using the unit, rewind, eject, and remove the cassette.
24 DVD Disc Playback (General Features) Buttons Operations Z (OPEN / CLOSE) Opens or closes the disc tray . X (P AUSE) During playback, press X to pause playback. Press X repeatedly to play Frame-by-Frame. . / > (SKIP) During playback, press . or > to go to the next chapter/track or to return to the beginning of the current chapter/track.
25 Operation Notes on general features: • If you press > once during Repeat Chapter (T rack) playback, the repeat playback cancels. • Zoom may not work on some DVDs.
26 Playing an Audio CD This unit can play Audio CDs. Audio CD Once you insert an Audio CD, a menu appears on the TV screen. Press v / V to select a track/file then press N (PLA Y) or ENTER (OK) and playback starts. Y ou can use variable playback functions.
27 Operation V iewing a JPEG file This unit can play JPEG files. 1. Insert a disc of JPEG files. The PHOT O menu appears on the TV screen. 2. Press v / V to select a folder , and press ENTER (OK). A list of files in the folder appears. 3. If you want to view a particular file, press v / V to highlight a file and press ENTER (OK) or N (PLA Y).
28 Playing a DVD VR format Disc This unit will play DVD-R/RW discs that are recorded using the DVD-Video format that have been finalized using a DVD-recorder . This unit will play DVD-RW discs that are recorded using the Video Recording (VR) format. 1.
29 Operation Reference Language Code Abkhazian 6566 Afar 6565 Afrikaans 6570 Albanian 8381 Ameharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 A ymara 6588 Azerbaijani 6590 Bashkir 6665 Basque 6985 .
30 T roubleshooting Symptom No power . Abnormal or no picture Distorted or no sound. The playback picture is poor . The unit does not start playback. Cause The AC power plug is disconnected from the AC outlet. The TV is not set to receive unit signal output.
31 Reference Symptom V ideo tape cannot be inserted. No Hi-Fi sound The Remote Control does not work properly . Camcorder image is not shown. Camcorder image via AV input to unit is not shown on TV screen. Cause The cassette tape is already loaded.
32 General Power requirements 120V , 60 Hz Power consumption 16 W Dimensions (approx.) 16.9" X 3.1" X 10.2" (430 X 79 X 260 mm) (w x h x d) Net Weight (approx.
33 Reference W arranty (Only in U.S.A.).
34 MEMO.
35 MEMO.
US HR-XVC1 1B / HR-XVC12S Printed in Indonesia 0108MNH-OT -OT P/N: MFL46896801.
An important point after buying a device JVC HR-XVC11B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC HR-XVC11B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC HR-XVC11B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC HR-XVC11B you will learn all the available features of the product, as well as information on its operation. The information that you get JVC HR-XVC11B will certainly help you make a decision on the purchase.
If you already are a holder of JVC HR-XVC11B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC HR-XVC11B.
However, one of the most important roles played by the user manual is to help in solving problems with JVC HR-XVC11B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC HR-XVC11B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
