Instruction/ maintenance manual of the product HR-XV1EK JVC
Go to page of 60
DVD PLA YER Hi-Fi VIDEO CASSETTE RECORDER USER’S GUIDE For model: HR-XV1EK DIGITAL VIDEO LPT0716-001A 2A77501B E Cover 5/30/02, 9:21 PM 1.
2 SAFETY FIRST The rating plate and the safety caution are on the rear of the unit. W ARNING: D ANGEROUS V OL T A GE INSIDE W ARNING: T O PREVENT FIRE OR SHOCK HAZARD , DO NOT EXPOSE THIS UNIT T O RAIN OR MOISTURE.
3 Safety Precautions When the equipment is installed in a cabinet or a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear .
4 Features Video Cassette Recorder • High Quality (HQ) Images • On-Screen Displays (OSD) • Nicam Hi-Fi Stereo Audio Recording and Playback • Auto TV Station T uning and Auto Clock Set • 80 M.
5 * This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
6 SCART -socket (for VCR/DECODER) SCART PRISE PERITEL Parts and functions Front STOP button Rear AC power cord PLA Y button OPEN/CLOSE button Disc tray Standby/On button DVD COAXIAL DIGIT AL AUDIO OUT.
7 No . Display Description VCR mode of TV/VCR switch 1 2 3 4 5 6 1 2 3 4 6 5 Display 7 8 9 10 VCR DVD CD 10 : 00 01 : 00 2 A1/A2/A3 TRK REC CH 2 Playback (lights) / Auto resume (flashes) Still picture DVD disc is inserted.
8 Remote control Pag e TV/VCR/DVD switch Switch to operate TV or VCR or DVD 14,37 Standby/On 14 T urn the connected TV on or off 8 DVD MENU Display menu of DVD software 45 MEMORY Index for DVD 42 RETURN Remove DVD set up menu 46 OPEN/CLOSE Open or Close the tray 38 DISPLA Y Change the front Display mode 22 A.
9 Remote control 12 3 Replace the compartment cover . Install two "AA" batteries (not supplied), paying attention to the polarity diagram in the battery compartment. Open the battery compart- ment cover in the direction of the arrow . How to install the batteries Use micro batteries type AA .
10 Connections and Installation Connect your DVD/VCR to your home's aerial and to your TV-set as shown in the illustration. When you have finished these connections you connect your DVD/VCR to the 230-240 V / 50 Hz mains.
11 Playback connection The exact arrangement you use to interconnect various video and audio components to the DVD/VCR is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of SCART socket.
12 Connect to an A V Amplifier with built-in digital surround If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems such as Dolby Digital and DTS by using the Coaxial Digital Output.
13 Plug your DVD/VCR's plug into the mains supply . "Auto" will start to flash in the display . Y our DVD/VCR will auto- matically tune itself in and set the correct time and date (This may take approx.
14 SELECT : CHANNEL SETUP ENTER EXIT : OK : MENU VCR SETUP AUTO REPEAT OFF SYSTEM SETUP TIMER REC SET SELECT : SYSTEM SETUP LANGUAGE/SPRACHE/LANGUE ENTER EXIT : OK : MENU CLOCK SET On-screen Language Selection Preparation • Press the button to turn on the DVD/VCR.
15 Setting the T ime and Date Manually • T urn on the TV , and select the VCR channel on TV . • Make sure TV/VCR/DVD switch has been slided to VCR/ DVD. Then press VCR to select the VCR mode. (The VCR indicator will light) Preparation 4 Set the month , year , hour and minute in the same way as in step 3 .
16 This VCR has one built-in tuner to receive broadcasts. Before you record a TV broadcast, you must set and preset all channels. This VCR can preset up to 80 channels. T uning the TV Stations Manually • T urn on the TV , and select the VCR channel on TV .
17 • T urn on the TV , and select the VCR channel on TV . • Press the button to turn on the VCR. Preparation 1 The TV stations must be stored according to the tuning guide given on page 13, otherwise the VIDEO Plus+ feature will not work.
18 Automatic tape eject This VCR will automatically rewind the tape when the tape has ended. And when the tape is rewinded to its beginning, the cassette tape will be ejected automatically. Loading and Unloading a Cassette T ape To prevent accidental erasure Remove the erase prevention tab with a screwdriver.
19 Load a prerecorded tape (When loading a cassette tape without the erase prevention tab, playback will start auto- matically). 1 2 Press . Playback will start. If the cassette has not loaded yet, will blink for 4 seconds. T o start playback Press 3 .
20 To return to the initial sharpness setting, press CANCEL while the sharpness setting screen is appearing. Note: Playback sharpness Adjust the sharpness of playback picture during playback. During slow motion, still picture and picture search, sharpness-adjusting is impossible.
21 Repeat Playback T o cancel the auto repeat mode, follow the above steps 1 and 2 , then select "OFF" and confirm by pressing SET UP MENU . Note: If the Repeat function is switched on, the playback will continue until it reaches the tape-end and then rewind to the beginning of the tape.
22 Preparation: • T urn ON the TV and select the VCR channel on TV . • Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then press VCR to select the VCR mode. (The VCR indicator will light) 1 Press OSD . The counter display shows the tape running time during playback or recording.
23 2 Video Index Search System 1 Recording several Index Marks Due to the system only one index mark will be recorded at the beginning of a recording. If you intend to set several index marks during a single recording, follow the procedure below: At the point of the recording where an index mark is to be set press 4 .
24 Preparation: • T urn ON the TV and select the VCR channel on TV . • Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then press VCR to select the VCR mode. (The VCR indicator will light) 1 Load a blank cassette tape with the erase prevention tab intact.
25 VCR Recording a TV Programme Recording with a SCART Lead: You can record a programme using the TV receiver of the DVD/VCR and at the same time watch another pro- gramme on the TV set using its re- ceiver.
26 Preparation: • T urn ON the TV and select the VCR channel on TV . • Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then press VCR to select the VCR mode. (The VCR indicator will light) 1 Load a blank cassette tape with the erase prevention tab intact.
27 PLUSCODE NO. DATE START END CH SPEED PDC 15 FRI 17:30 18:00 3 SP OFF SELECT SET EXIT : : : MENU 57378 OK : OK Look up the PlusCode Number in an appropriate TV programme magazine. Select the desired TV programme for recording and refer to the PlusCode Number next to it.
28 TIMER REC SET DATE START END CH SPEED PDC 15 FRI 17:30 18:00 3 LP ON SELECT SET EXIT : : : MENU OK : OK • As long as the timer is activated (clock symbol indicated on the display), you cannot use the VCR. If you want to use the VCR, first press • to deactivate the timer .
29 SELECT : TIMER REC SET START DATE 23 FRI END SET EXIT : : MENU CH SPEED 19:30 3 LP PDC OFF OK : OK 21:30 Note: • When the power supply is interrupted for more than 30 minutes, the preset programme is cleared. In this case, you have to set the timer again.
30 SUN-SAT MON-SAT MON-FRI WKL-THU WKL-WED WKL-TUE DATE-DAY WKL-FRI WKL-SAT WKL-SUN WKL-MON T imer Recording Manually 5 6 Although the data is stored in the timer , it is not ready for recording. T o start timer recording, press • to turn it on. When no video cassette is loaded, the clock symbol does not appear .
31 T imer Recording Manually Press ▲ or ▼ to select the timer programme you wish to cancel. Then press CANCEL . This line is now cancelled. T o cancel a Timer programme. 1 If the T imer has been activated, now press • to deacti- vate the timer .
32 NICAM OFF NICAM M1/2 NICAM M1 NICAM ST TIMER REC SET AUTO REPEAT CHANNEL SETUP SYSTEM SETUP SELECT : ENTER : OK MENU EXIT : VCR SETUP [OFF] NICAM Stereo Recording and Playback Note: This DVD/VCR is capable of recording sound in Hi-Fi system. The recording will be performed automatically .
33 When playing HiFi cassette tapes recorded on another VCR, the sound output may be distorted. This is normal and no indication of a unit malfunction. Try to minimize sound distortions by using SET +/ – or change to MONO by pressing of A.MONITOR . NICAM Stereo Recording and Playback Playback Use A.
34 TIMER REC SET AUTO REPEAT CHANNEL SETUP SYSTEM SETUP SELECT : ENTER : OK MENU EXIT : VCR SETUP [OFF] Audio Mixing You can listen to both sound tracks (Hi- Fi and MONO), by setting AUDIO MIX- ING mode. 1 Press SET UP MENU . Press or to select VCR SETUP .
35 Before starting the duplicating process, select the proper tape speed using . For a pre-recorded tape the correct tape speed will be set automatically during playback. Duplicating a V ideo T ape When you try to connect with a cable, make sure the power of both units have been turned off.
36 Disc This unit applies to DVD discs from Region 2 only . The loaded Disc (DVD, Video-CD, Audio-CD and MP3-CD) will be recognized automatically . The suitable Disc-formats are: DVD, CD-R and CD-RW . Some CD-R/RW discs may be incompatible. This DVD/VCR uses the P AL color system.
37 English Espa ol Fran ais A B C Language Subtitle Language ENG Audio Language ENG Disc Menu Language ENG On-Screen Language ENG : Select : Enter A B C Language Subtitle Language ENG Audio Language ENG Disc Menu Language ENG On-Screen Language ENG : Select : Enter 4 Setting setup language The setup language can be selected.
38 4 Playback procedure Press or OPEN/CLOSE . The disc tray closes automati- cally . On the screen, changes to “ ” and then playback will commence. • A menu screen may appear on the TV screen, if the disc has a menu feature. In this case, press , , , or OK to operate a menu feature.
39 Special playback Press during normal playback. Each press of will increase the speed of the search x2 ( ), x8 ( ), x30 ( ), x100 ( ). (in case of Audio-CD: x4 ( ) and x8 ( ) are available) • To resume normal playback, press . Fast Forward Playback Press during normal playback.
40 DVD Picture Signal Selection/Zooming Note: • Picture Signal Selection is only available for connecting with a 21 pin Scart Cable. • Depending on your TV , NTSC disc may not playback correctly in colour . In this case, it is recommended to select the Picture Signal RGB on step 2 .
41 A - NOTES: Some discs may not work with the repeat operation. In A-B repeat mode, subtitles near point A or B may not appear . During the A-B Repeat Playback the ANGLE feature will not operate. Y ou may not be able to set A-B Re- peat, depending on the scenes of the DVD.
42 1 T: - - CT: - - - 2 T: - - CT: - - - 3 T: - - CT: - - - 4 T: - - CT: - - - 5 T: - - CT: - - - 6 T: - - CT: - - - 7 T: - - CT: - - - : Select 0-9 : Input : Play Memory Memory playback/Random playback 1 Press MEMORY . 2 Press / to select “ T ” Title number or “ CT ” Chapter or Track number.
43 EAM : Select : Enter T 1 000:23 MP3 PCM 4 3 MP3 Playback This player can play back the MP3-data which has been recorded on CD-R or CD- RW. To produce the MP3-data, you need a Windows-PC with CD-ROM drive and a MP3- encoding Software (not supplied).
44 : Select : Return Audio:ENG1 2CH 2CH ENG2 5.1CH FRE1 2CH ENG1 2CH : Select : Return Audio:FRE1 2CH 2CH ENG2 5.1CH FRE1 2CH ENG1 2CH Changing soundtrack language / Changing Subtitles language 1 Press A.MONITOR during play- back. The current soundtrack language is displayed.
45 Changing angles / T itle selection / DVD menu Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title. 1 Press TITLE during playback. Title menu appears on the screen. • Press TITLE again to resume playback at the scene when you pressed TITLE .
46 A B C Operation Title Stop Off Parental Lock Off PBC On Pause/Still Auto On Off : Select : Enter A B C Operation Title Stop Off Parental Lock Off PBC On Pause/Still Auto On Off : Select : Enter Parental control 1 Press SET UP MENU in the stop mode.
47 Parental control T o change the parental lock level Follow steps 1 - 6 . 6 Press / to select the paren- tal lock level, then press OK (En- ter). You cannot play DVD discs rated higher than the level you selected unless you cancel the parental lock function.
48 A B C Language Subtitle Language ENG Audio Language ENG On-Screen Language ENG German Others Code E N French : Select : Enter Disc Menu Language EN English Setting menu language Press OK (ENTER). Press or to select your desired language, then press OK (ENTER).
49 A B C : Select : Enter Picture TV Shape 4:3LB Video Out Select Video A B C Language Subtitle Language ENG Audio Language EN Disc Menu Language ENG On-Screen Language ENG : Select : Enter German Oth.
50 A B C Language Subtitle Language EN Audio Language ENG Disc Menu Language ENG On-Screen Language ENG : Select : Enter German No Subtitle Others Code E N French English A B C Language Subtitle Langu.
51 A B C : Select : Enter Picture TV Shape 4:3LB Video Out Select Video Setting the aspect ratio of TV screen / Setting on Screen display Press OK (Enter). Press or to select your desired screen type. 1 Press SET UP MENU in the stop mode. Press or to select “ Picture ” , then press or to select “ TV shape ” .
52 A B C Audio Karaoke Vocal On Dynamic Range Control On Audio Out Select Bitstream Analog 2ch PCM Bitstream : Select : Enter Setting Audio 1 Press SET UP MENU in the stop mode. Press or to select “ Audio ” . 2 NOTES: • The Dynamic Range Control function works only during playback of Dolby Digital recorded discs.
53 Setting Operation • T urn ON the TV and set to the video input mode. • Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then press DVD to select the DVD mode. (The DVD indicator will light) Preparation: Title Stop Turn on or off a feature that automatically stops playback after a title has been viewed.
54 Selecting the sound enhancement (E.A.M.)/Setting Background/ Setting Screen Saver • T urn ON the TV and set to the video input mode. • Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then press DVD to select the DVD mode. (The DVD indicator will light) Preparation: 1 Press OSD twice.
55 Fran ç ais Espa ñ ol A B C Initial Setup Audio Out Select Bitstream TV Shape 4:3LB On-Screen Language ENG English : Select : Enter Deutsch A B C : Select : Enter Picture TV Shape 4:3LB Video Out Select Video 1 Press SET UP MENU in the stop mode. Press or to select “ Initial Setup ” .
56 DVD Status display of Disc Y ou can view information on the operation status and access and settings. With each press of OSD , the status of the disc will appear on the screen and change as follows. 1 Press or to select the desired symbol mark, then press OK (Enter).
57 T able of languages Enter the appropriate code for the initial settings"Menu", "Audio" and/or "Subtitle" (see pages 48~50).
58 SYMPTOMS POSSIBLE SOLUTIONS • Make sure the power cord is plugged in. • Try another AC outlet. • Power is off, check fuse or circuit breaker. • Unplug unit, then plug it back in. • Select the DVD or VCR mode before operating. DVD/VCR does not operate.
59 No subtitle • Some discs have no subtitles. • Subtitles are cleared. Press SUB TITLE. Angle cannot be changed. • Multi-angles are not recorded on the DVD disc.
GENERAL Power supply: Power consumption: Weight: Dimensions: Input Level: Output Level: Hi-Fi Frequency Response: Hi-Fi Dynamic Range: VCR section Video Head: Audio T rack: Channel covevage: RF Channel Output: F .
An important point after buying a device JVC HR-XV1EK (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC HR-XV1EK yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC HR-XV1EK - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC HR-XV1EK you will learn all the available features of the product, as well as information on its operation. The information that you get JVC HR-XV1EK will certainly help you make a decision on the purchase.
If you already are a holder of JVC HR-XV1EK, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC HR-XV1EK.
However, one of the most important roles played by the user manual is to help in solving problems with JVC HR-XV1EK. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC HR-XV1EK along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
