Instruction/ maintenance manual of the product HR-VP48U JVC
Go to page of 48
H R-VP48U VIDEO CASSETTE RECORDER INSTRUCTIONS LPT0340-001A For Customer Use: Enter below the Model No. and Serial No. which are located on the rear of cabinet.
2 EN Dear Customer , Thank you for purchasing the JVC VHS video cassette recorder . Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new VCR. CAUTIONS W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
EN 3 IMPOR T ANT PRODUCT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety .
4 EN SERVICING 1. Servicing If your product is not operating correctly or exhibits a marked change in performance and you are unable to restore normal operation by following the detailed procedure in its operating instructions, do not attempt to service it yourself as opening or removing covers may expose you to dangerous voltage or other hazards.
EN 5 CONTENTS T IMER RECORDING 24 VCR Plus+ Timer Programing ...................... 24 VCR Plus+ Setup ......................................... 26 Express Timer Programing .......................... 28 Checking program settings ......................
6 EN ANT. IN RF OUT CH3 CH4 OUT AUDIO VIDEO INST ALLING YOUR NEW VCR RF OUT RF cable (supplied) Matching transformer (not supplied) AC Power Cord Audio/video cable (not supplied) TV ANTENNA IN (Antenn.
EN 7 1 Check contents Make sure the package contains all of the accessories listed in “SPECIFICA TIONS” ( 墌 pg. 43). 2 Situate VCR Place the VCR on a stable, horizontal surface. 3 Connect VCR to TV The following connections are required. RF Connection 1 Disconnect the TV antenna from the TV .
8 EN SP EP VCR INFORMA TION ● If “AUT O CLOCK” is set to “ON” on the Clock Set screen on page 1 1, the clock will be adjusted automatically by the host channel every hour (except 1 1:00 PM, midnight, 1:00 AM and 2:00 AM) using the incoming PBS channel clock setting data.
EN 9 Language Setting This VCR offers you the language choice to view menus and some messages (excluding the on-screen display superimposed on the TV screen) — in English, Spanish or French. Select the desired language using the following procedure.
10 EN INITIAL SETTINGS (cont.) Clock Setting Perform clock setting only if the clock has not been set correctly by the Plug & Play setting or if you use a cable box. Access the Clock Set screen to perform the Semiauto or Manual Clock Set. Each procedure starts from step 4 after preparation steps below are finished.
EN 11 Setting clock semiautomatically — Semiauto Clock Set Y ou can change the host channel/D.S.T . /time zone setting manually . First follow steps 1 to 3 on page 10, then go to the following steps. 4 Set Auto Clock to ON On the front panel: Press CH 5∞ to move the highlight bar to “AUT O CLOCK”, then press OK so that “ON” is selected.
12 EN INITIAL SETTINGS (cont.) 5 Set date On the front panel: Press CH 5∞ until the desired date appears, then press OK . On the Remote: Press SHUTTLE PLUS 5∞ until the desired date appears, then press OK or SHUTTLE PLUS 3 . ● Holding CH 5∞ or SHUTTLE PLUS 5∞ changes the date in 15-day intervals.
EN 13 T uner Setting Setting channels automatically — Auto Channel Set Use Auto Channel Set only if channels have not been set correctly by the Plug & Play setting or if you use a cable box. If you want to add or delete channels, use Manual Channel Set ( 墌 pg.
14 EN INITIAL SETTINGS (cont.) 2 Access T uner Set screen On the front panel: Press CH 5∞ to move the highlight bar (arrow) to “TUNER SET”, then press OK . On the Remote: Press SHUTTLE PLUS 5∞ to move the highlight bar (arrow) to “TUNER SET”, then press OK or SHUTTLE PLUS 3 .
EN 15 1 7 89 2 4 1 3 2 3 4 5 6 0 BASIC PLA YBACK AND RECORDING Basic Playback 1 Load a cassette Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the VCR. Do not apply too much pressure when inserting.
16 EN Basic Playback Features Changing display information Press DISPLA Y during playback. Each time you press the button, the front panel display shows the time counter and the clock time alternately . ● T o display the VCR status including the time counter and the clock time on the TV screen, see “Showing on- screen display” ( 墌 pg.
EN 17 D Adjusting tracking condition — T racking Adjustments Automatic tracking adjustment This VCR automatically adjusts the tracking condition. Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback.
18 EN BASIC PLA YBACK AND RECORDING (cont.) Locating beginning of recordings — Index Search Index codes are placed on the tape at the beginning of each recording when recording on this VCR. Y ou can find and automatically play back from the beginning of any recording using the Index Search function.
EN 19 Basic Recording 1 Load a cassette Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette. 2 Select recording channel On the front panel: Press CH 5∞ . On the Remote: a – Press CH + or – .
20 EN Basic Recording Features A B Changing display information Press DISPLA Y during recording or recording pause. Each time you press the button, the front panel display shows the time counter , channel number and the clock time in sequence.
EN 21 D CH 125 RECORD THU 12:00 AM PAUSE ] SP INDEX-1 COUNT –1:23:45 BE +++ Showing on-screen display When “SUPERIMPOSE” is set to “ON” ( 墌 pg. 33), you can see the current VCR status on the TV screen. ● For more detailed information about the on-screen display , see page 41.
22 EN Reverse search Reverse Forward search Forward Reverse play Reverse slow motion Slow motion Normal Play 3 steps 2 steps 2 steps 4 steps T V C H + T V V O L – T V C H – T V V O L + SHUTTLE PLU.
EN 23 B Viewing slow motion picture — Slow Motion Playback On the front panel: During normal playback or still picture playback: Press and hold P AUSE ( 8 ) for more than 2 seconds. On the Remote: ● During normal playback: Press SHUTTLE PLUS 4 to decrease the playback speed.
24 EN VCR Plus+ Timer Pr ograming T urn on the VCR and the TV , and select the VCR channel 3 or 4 (or A V mode) on the TV . T imer recording allows you to program the VCR to automatically record a broadcast at some future time. Up to 8 timer recording programs can be made using VCR Plus+ timer programing or Express timer programing method ( 墌 pg.
EN 25 PROGRAM 1 (VCR PLUS+ 12345678) ST ART STOP 8:00PM = 10:00PM DA TE CH 12/24/00 12 SP SA T PRESS (8=DAIL Y , 9=WEEKL Y STOP+/– = STOP TIME, SP/EP) PRESS (PROG.
26 EN TIMER RECORDING (cont.) VCR Plus+ Setup T urn on the VCR and the TV , and select the VCR channel 3 or 4 (or A V mode) on the TV . IMPORT ANT If you have moved to a different area or if a broadcasting station’ s channel number has been changed, the wrong VCR CH number will be displayed on the Program screen ( 墌 step 5 on page 25).
EN 27 1 Access Main Menu screen Press MENU . 2 Access Initial Set screen On the front panel: Press CH 5∞ to move the highlight bar (arrow) to “INITIAL SET”, then press OK . On the Remote: Press SHUTTLE PLUS 5∞ to move the highlight bar (arrow) to “INITIAL SET”, then press OK or SHUTTLE PLUS 3 .
28 EN TIMER RECORDING (cont.) Y ou can directly program the VCR’ s timer to record up to 8 broadcasts, as far as a year in advance. Remember , the clock must be set before you can program the timer ( 墌 pg. 8 or 10). 1 Load a cassette Make sure the record safety tab is intact.
EN 29 8 Set tape speed Press SP/EP to set the tape speed. 9 Return to normal screen Press PROG. or OK . “PROGRAM COMPLETED” appears on the screen for about 5 seconds, then normal screen appears. • If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, you have another program overlapping the program you have just made.
30 EN TIMER RECORDING (cont.) Checking program settings 1 Disengage timer Press TIMER , then press POWER . ● When “AUT O TIMER” ( 墌 pg. 33) is set to “ON”, you do not have to press TIMER . 2 Access Program Check screen Press PROG. CHECK . 3 Access Program screen Press PROG.
EN 31 When programs overlap each other If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, you have another program overlapping the program you have just made.
32 EN Y ou can use the other useful function settings on the Function Set screen by following the procedure described below . ● For the functions you can set on the Function Set screen, see pages 33 to 34.
EN 33 * The default setting is bold in the table below . When this function is set to “ON”, this VCR checks the condition of the tape in use during playback, and compensates to provide the highest- possible playback pictures. This function helps you to adjust the playback picture quality according to your preference.
34 EN * The default setting is bold in the table below . When this function is set to “ON”, the VCR automatically switches to EP mode to allow complete recording if there is not enough tape to record the entire program while timer -recording in SP mode.
EN 35 ANT. IN RF OUT CH3 CH4 OUT AUDIO VIDEO Edit T o Or Fr om Another VCR Y ou can use your VCR as the playback or recording VCR. ● Refer also to the other VCR’ s instruction manual for connection and its operations.
36 EN TROUBLESHOOTING Before requesting service, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your VCR off for repair . POSSIBLE CAUSE ● The AC power cord is disconnected.
EN 37 CORRECTIVE ACTION Set the clock and/or timer correctly . Press TIMER and check to make sure that ‰ appears on the front display panel. Re-perform the set-up procedures. Make sure you have compensated for guide channel and VCR or cable box channel number mismatches ( 墌 pg.
38 EN RECORDING Q. When I pause and then resume a recording, the end of the recording before the pause is overlapped by the new recording. Why does this happen? A. This is normal. It reduces distortion at the pause and resume points. . . . . . . . . .
EN 39 INDEX List of terms This guide serves as a quick way to locate frequently used terms and on-screen display names. A Accidental erasure pr evention 19 Auto Channel Set 13 Auto Daylight Saving T ime 1 1 Auto Picture 33 Auto SP = EP T imer 34 Auto T imer 33 Automatic tracking 17 A V connection 6 B Blue Back 34 C Channel No.
40 EN INDEX (cont.) Front panel 1 POWER button : 墌 pg. 15, 19 2 Cassette loading slot 3 REW ( 1 ) button : 墌 pg. 15, 19 4 PLA Y ( # ) button : 墌 pg. 15, 19 5 FF ( ¡ ) button : 墌 pg. 15, 19 6 AUDIO/VIDEO input connectors : 墌 pg. 35 7 OK button 8 MENU button 9 Front display panel : 墌 below 0 Remote sensor ! CH 5∞ buttons : 墌 pg.
EN 41 Rear panel 1 AC power cord : 墌 pg. 6 2 AUDIO/VIDEO OUT connectors : 墌 pg. 6, 35 3 ANT . (Antenna) IN terminal : 墌 pg. 6 4 CH3-CH4 switch : 墌 pg. 7 5 RF OUT terminal : 墌 pg. 6 On-screen display 1 Channel and auxiliary input (“F-1”) 2 Date and clock time : 墌 pg.
42 EN Remote 1 TV button : See below 2 TV/VCR button : 墌 pg. 19, 20 3 REVIEW button : 墌 pg. 18 4 Number buttons : 墌 pg. 19, 24, 27 5 CANCEL button : 墌 pg. 25, 30 C. (Counter) RESET button : 墌 pg. 16, 20 6 ST OP +/– button : 墌 pg. 25, 28 7 ST ART +/– button : 墌 pg.
EN 43 GENERAL Power requirement : AC 120 V ` , 60 Hz Power consumption Power on : 17 W Power off : 2.2 W T emperature Operating : 5°C to 40°C (41°F to 104°F) Storage : –20°C to 60°C (–4°F to140°F) Operating position : Horizontal only Dimensions (W x H x D) : 360 x 94 x 278 mm (14-3/16" x 3-3/4" x 10-15/16") W eight : 3.
44 EN FOR SERVICING (Only in U.S.A.) HO W T O LOCA TE Y OUR JVC SER VICE CENTER JVC SER VICE & ENGINEERING COMP ANY OF AMERICA DIVISION OF JVC AMERICAS CORP .
EN 45 WARRANTY (Only in U.S.A.) LIMITED WARRANTY CONSUMER VIDEO 1-90 JVC COMP ANY OF AMERICA warrants this product and all parts thereof, e xcept as set f or th below ONL Y T O THE ORIGINAL PURCHASER A T RET AIL to be FREE FROM DEFECTIVE MA TERIALS AND W ORKMANSHIP from the date of original retail purchase f or the period as shown below .
46 EN MEMO.
EN 47.
HR-VP48U COPYRIGHT © 1999 VICTOR COMPANY OF JAPAN, LTD. Printed in China 1199 IYV * MW * BJ VICTOR COMP ANY OF JAPAN, LIMITED U/U(C).
An important point after buying a device JVC HR-VP48U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC HR-VP48U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC HR-VP48U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC HR-VP48U you will learn all the available features of the product, as well as information on its operation. The information that you get JVC HR-VP48U will certainly help you make a decision on the purchase.
If you already are a holder of JVC HR-VP48U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC HR-VP48U.
However, one of the most important roles played by the user manual is to help in solving problems with JVC HR-VP48U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC HR-VP48U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
