Instruction/ maintenance manual of the product HR-S8600EU JVC
Go to page of 76
H R-S8600EU 6 25 123 456 789 1 2 3 4 1 2 3 4 VCR TV CABLE /SAT TV/VCR – –:– – AUDIO 0000 START DEBUT STOP FIN DATE TV PROG DAILY/Q TDN. VPS/PDC AUX WEEK LY/ HEBD O EXPRESS LCD PR OG ENTER/ENTR.
2 EN SAFETY FIRST IMPORT ANT n Please read the various precautions on page 2 and 3 before installing or operating the recorder . n It should be noted that it may be unlawful to re-record pre-recorded .
EN 3 Failure to heed the following precautions may result in damage to the recorder , remote control or video cassette. 1. DO NOT place the recorder . . . ... in an environment prone to extreme temperatures or humidity . ... in direct sunlight. ... in a dusty environment.
4 EN Basic Connections CHECK CONTENTS 1 Make sure the package contains all of the accessories listed in “Specifications” ( Z pg. 74). SITUA TE RECORDER 2 Place the recorder on a stable, horizontal surface. CONNECT RECORDER TO TV 3 The connection method you use depends on the type of TV you have.
EN 5 AV1 IN/OUT AV2 IN/DECODER AV1 OUT COMP. Y/C PAUSE/R.A. EDIT ANT. IN RF OUT S OUT R L AUDIO OUT JLIP SYNCHRO EDIT After you plug the mains power cord into a mains outlet, the Country Set display a.
6 EN INITIAL SETTINGS When the button on the recorder/remote control is pressed for the first time to power on the recorder after you plug the mains power cord into a mains outlet, the Country Set display will appear on the TV screen and the recorder's front display panel.
EN 7 SELECT LANGUAGE 3 Press OK . The Language Set display appears on the front display panel and/or on the screen. If you are referring to the front display panel Press % fi to select your language code. If you are referring to the on-screen display Press % fi to move the highlight bar (pointer) to the language of your choice.
8 EN INITIAL SETTINGS (cont.) Preset Download When you connect the recorder and your TV via fully-wired 21-pin SCAR T cable ( Z pg. 4), you can set the recorder's tuner channels by downloading preset data from your TV instead of using the Auto Set Up function ( Z pg.
EN 9 If both auto channel set and auto clock set have been performed successfully: 1 T urn on the TV and select its VIDEO channel or A V mode, then make sure that all necessary stations have been stored in the recorder's memory by using the TV PROG button(s).
10 EN INITIAL SETTINGS (cont.) Language This recorder offers you the choice to view on-screen messages in 10 different languages. Though Auto Set Up selects the language automatically ( Z pg. 9), you can change the language setting manually using this procedure as required.
EN 11 On-Screen Displays Y ou can choose whether or not to have various operational indicators appear on screen, by setting this function ON or OFF . Messages appear in the selected language ( Z pg. 9 or 10). T urn on the TV and select the VIDEO channel (or A V mode).
12 EN Power Save Mode T urn on the TV and select the VIDEO channel (or A V mode). Y ou can reduce the power consumption while the recorder is turned off. TURN ON THE RECORDER 1 Press . ACCESS MAIN MENU SCREEN 2 Press MENU . ACCESS MODE SET SCREEN 3 Press %fi to move the highlight bar (pointer) to "MODE SET", then press OK or # .
EN 13 T -V LINK T -V Link Functions NexTV iew Link Y ou can download the EPG (Electronic Programme Guide) information from your TV for timer -programming on the recorder . For details, refer to the instruction manual for your TV . TV Auto Power On Y ou can turn on the TV and set it to video mode automatically whenever you play a tape.
14 EN Colour System Set INFORMA TION ON COLOUR SYSTEM TURN ON THE RECORDER 1 Press . ACCESS MAIN MENU SCREEN 2 Press MENU . ACCESS MODE SET SCREEN 3 Press %fi to move the highlight bar (pointer) to "MODE SET", then press OK or # .
EN 15 PLA YBACK Basic Playback The easiest, most basic operation possible with your video recorder is tape playback. Already-recorded signals on a video tape are read by your video recorder and displayed on your TV just like a TV programme.
16 EN PLA YBACK (cont.) Slow Motion ACTIV A TE SLOW-MOTION PLA YBACK 1 T urn the TIME SCAN SHUTTLE ring to the left or press @ during playback to decrease speed in the forward direction.
EN 17 Manual T racking Y our video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the TV PROG buttons. OVERRIDE AUTOMA TIC TRACKING 1 Press on the remote to engage manual tracking.
18 EN PLA YBACK (cont.) Digital TBC/NR Y our video recorder is equipped with the Digital TBC (T ime Base Corrector) that removes jitter from fluctuating video signals to deliver a stable picture even with old tapes and rental cassettes.
EN 19 Soundtrack Selection Y our video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.
20 EN PLA YBACK (cont.) TimeScan Y our recorder is equipped with the T imeScan function. T imeScan allows noise free pictures to be displayed on your TV screen in the forward and reverse search modes. Audio will be played back at normal speed during the T imeScan modes ( Z pg.
EN 21 Names of special-effects playback Reverse Forward Search Play Slow-Motion *Still Slow-Motion Play Sear ch (T ime Jog**) (T ime Jog**) -9x -7x -5x -3x -1x -1/2x -1/3x 0 1/3x 1/2x 1x 1.5x 2x 3x 5x 7x 9x -7x -3x -1/2x 0 1/2x 1x 1.5x 2x 5x 9x Audio is output.
22 EN TV signals being received by the recorder ’ s built-in tuner can be recorded onto a video tape. Y ou can “capture” a TV programme using your video recorder . RECORDING Basic Recording T urn on the TV and select the VIDEO channel (or A V mode).
EN 23 Recording Features Record One Pr ogramme While W atching Another If your recorder is connected to the TV via A V connection, . . . . . . press TV/VCR .
24 EN RECORDING (cont.) S-VHS (Super VHS) and VHS Y our recorder can record in either S-VHS or VHS. T o record in S-VHS: Perform the steps 1 – 4 below to set "S-VHS" to "A U TO". Then, insert a cassette marked "S-VHS", the S-VHS indicator will light on the display panel.
EN 25 Receiving Stereo And Bilingual Pr ogrammes Y our recorder is equipped with a Sound-Multiplex decoder (A2) and a Digital stereo sound decoder (NICAM) making reception of stereo and bilingual broadcasts possible. When the channel is changed, the type of broadcast being received will be displayed on the TV screen for a few seconds.
26 EN B.E.S.T . Picture System The B.E.S.T . (Biconditional Equalised Signal T racking) system checks the condition of the tape in use during recording and playback, and compensates to provide the highest-possible recording and playback pictures. The default setting for both recording and playback is “ON”.
EN 27 Recording ST AR T RECORDING 1 Press and hold RECORD and press PLA Y on the remote, or press RECORD on the recorder . DURING B.E.S.T . B.E.S.T . COMPLETE ● The recorder spends approximately 7 seconds assessing the condition of the tape, then begins recording.
28 EN ACCESS SHOWVIEW SCREEN 1 Press PROG . The front display panel looks like this: ENTER SHOWVIEW NUMBER 2 Press the NUMBER keys to enter the S HOW V IEW number of a programme you wish to record, then press OK . ● If you make a mistake, press and input the correct number .
EN 29 SET T APE SPEED 4 Press SP/LP ( ) to set the tape speed. SET VPS/PDC MODE 5 Press VPS/PDC to select "ON" or "OFF". If "VPS/PDC ON" is displayed on the screen or "VPS/ PDC" is lit on the display panel, VPS/PDC is set to ON.
30 EN Express Timer Pr ogramming TIMER RECORDING (cont.) If you don’t know the S HOW V IEW number for the programme you wish to record, use the following procedure to set your recorder to timer -record the programme. ACCESS SHOWVIEW SCREEN 1 Press PROG .
EN 31 ENTER CHANNEL POSITION 6 Press TV PROG +/– . SET T APE SPEED 7 Press SP/LP ( ) to set the tape speed. SET VPS/PDC MODE 8 Press VPS/PDC to select "ON" or "OFF". If "VPS/PDC ON" is displayed on the screen or "VPS/ PDC" is lit on the display panel, VPS/PDC is set to ON.
32 EN Check, Cancel And Replace Pr ogrammes DISENGAGE TIMER MODE 1 Press ‰ ( TIMER ), then press . ACCESS PROGRAM CHECK SCREEN/DISPLA Y 2 Press . ACCESS PROGRAM SCREEN/ DISPLA Y 3 Press again to check more information. Each time you press , the next programme's information appears.
EN 33 Auto SP → LP Timer If, when timer -recording in SP mode, there is not enough tape to record the entire programme, the recorder automatically switches to LP mode to allow complete recording.
34 EN Auto Timer When the Auto T imer is set to ON the timer is automatically engaged when the recorder power is turned off and automati- cally disengaged when the recorder is powered back on. ACCESS MAIN MENU SCREEN 1 Press MENU . ACCESS MODE SET SCREEN 2 Press %fi to move the highlight bar (pointer) to "MODE SET", then press OK or # .
EN 35 This facility allows you record automatically a satellite programme which is timer -programmed on your external satellite tuner . Connect a satellite tuner to the recorder's A V2 IN/DECODER connector ( Z pg.
36 EN Remote A/B Code Switching The remote control is capable of controlling two JVC video recorders independently; one set to respond to the remote control’ s A code control signals and another set to respond to B code control signals.
EN 37 Contr ol Y our TV Using Additional Buttons Use the NUMBER keys, and the button, button or ‰ button to select the TV’ s channel. ● W ith televisions under Code 01, 02, 07, 10, 1 1, 14, 20, .
38 EN Satellite T uner Multi-Brand Remote Contr ol Y our remote control can operate the basic functions of your satellite tuner set. In addition to JVC satellite tuners, other manufacturer ’ s satellite tuner s can also be controlled. Before you start .
EN 39 EDITING Picture Contr ol This feature helps you to adjust the playback picture quality according to your preference. *The default setting is "AUT O." ACCESS MAIN MENU SCREEN 1 Press MENU . ACCESS MODE SET SCREEN 2 Move the highlighted bar (pointer) to "MODE SET" by pressing %fi , then press OK or # .
40 EN S-VIDEO VIDEO ( MONO ) L – AUDIO – R STANDBY/ON TV PROG REC LINK DIGITAL TBC/NR S L O W S L O W @ JOG SHUTTLE 8 REW FF TIMER SYNCHRO EDIT INSERT A.DUB SP / LP EDITING (cont.) S-VIDEO VIDEO ( MONO ) L – AUDIO – R STANDBY/ON TV PROG REC LINK DIGITAL TBC/NR S L O W S L O W @ JOG SHUTTLE 8 REW FF TIMER SYNCHRO EDIT INSERT A.
EN 41 The Synchro Editing function synchronizes the start of the playback and recording operations when starting an edit operation using a camcorder with LANC connector and your video recorder . Synchr o Editing MAKE CONNECTIONS 1 Connect your recorder to camcorder ( Z pg.
42 EN Edit T o Or Fr om Another V ideo Recorder Y ou can use your video recorder as the source player or as the recording deck. MAKE CONNECTIONS 1 Connect the player ’ s 21-pin SCAR T connector to the recorder ’ s 21-pin SCART connector as illustrated on page 43.
EN 43 AV1 IN/OUT AV2 IN/DECODER AV1 OUT COMP. Y/C PAUSE/R.A. EDIT ANT. IN RF OUT S OUT R L AUDIO OUT JLIP SYNCHRO EDIT AV1 IN/OUT AV2 IN/DECODER AV1 OUT COMP.
44 EN MODE SET B. E. S. T . ON PICTURE CONTROL AUTO AUTO TIMER OFF O. S. D. O N DIRECT REC ON AUTO SP = LP TIMER OFF DIGIT AL 3R ON NEXT PAGE [ 5∞ ] = [MENU] : EXIT A V2 SELECT Setting Set "A V2 SELECT" to the appropriate mode depending on the type of unit connected to the rear panel A V2 IN/DECODER connector of this recorder .
EN 45 S-VIDEO VIDEO ( MONO ) L – AUDIO – R STANDBY/ON TV PROG REC LINK DIGITAL TBC/NR S L O W S L O W @ JOG SHUTTLE 8 REW FF TIMER SYNCHRO EDIT INSERT A.DUB SP / LP S-VIDEO VIDEO ( MONO ) L – AUDIO – R STANDBY/ON TV PROG REC LINK DIGITAL TBC/NR S L O W S L O W @ JOG SHUTTLE 8 REW FF TIMER SYNCHRO EDIT INSERT A.
46 EN S-VIDEO VIDEO ( MONO ) L – AUDIO – R STANDBY/ON TV PROG REC LINK DIGITAL TBC/NR S L O W S L O W @ JOG SHUTTLE 8 REW FF TIMER SYNCHRO EDIT INSERT A.DUB SP / LP TV PROG PAUSE TIME SCAN SHUTTLE JOG Insert editing replaces part of the recorded scene with new material.
EN 47 ENGAGE INSER T EDITING 6 Press INSERT . ● Y our recorder enters the Insert-Pause mode. (" ", " " and " " light up on the front display panel.) ● The TV screen changes from the still picture to the input source you are going to record.
48 EN PAUSE/ R.A. EDIT REMOTE PAUSE S-VIDEO VIDEO ( MONO ) L – AUDIO – R STANDBY/ON TV PROG REC LINK DIGITAL TBC/NR S L O W S L O W @ JOG SHUTTLE 8 REW FF TIMER SYNCHRO EDIT INSERT A.
EN 49 LOCA TE EDIT -IN POINT 8 Find the point on the source tape from where you want the edited scene to begin by pressing @ # or using the TIME SCAN SHUTTLE ring or the JOG dial, then press PROG . ● The edit-in point is registered in memory and appears on the screen.
50 EN INFORMA TION ON J TERMINAL J T erminal (JLIP(Joint Level Interface Protocol) Connector) The J T erminal is used to connect the recorder to a personal computer or similar device to allow computerized control of the recorder during editing and certain other operations.
EN 51 SYSTEM CONNECTIONS AV1 IN/OUT AV2 IN/DECODER AV1 OUT COMP. Y/C PAUSE/R.A. EDIT ANT. IN RF OUT S OUT R L AUDIO OUT JLIP SYNCHRO EDIT DECODER VCR TV Connection T o A Satellite T uner Simple Connections This is an example of simple connection if you don't have a decoder .
52 EN AV1 IN/OUT AV2 IN/DECODER AV1 OUT COMP. Y/C PAUSE/R.A. EDIT ANT. IN RF OUT S OUT R L AUDIO OUT JLIP SYNCHRO EDIT DECODER VCR TV EXT.2 EXT.1 Per fect Connections This is an example of recommended connection if you have both satellite tuner and decoder .
EN 53 Basic Connections This is an example of basic connection if you have both satellite tuner and decoder . Connect the decoder to your recorder's A V2 IN/DECODER connector and A V1 IN/OUT connector to the satellite tuner's connector . Then connect the satellite tuner and TV .
54 EN The A V2 IN/DECODER connector can be used as an input terminal for an external decoder (descrambler). Simply connect a decoder and you can enjoy the variety of programming that is available through scrambled channels. SELECT INPUT MODE 1 Set "A V2 SELECT " to "DECODER".
EN 55 AV1 IN/OUT AV2 IN/DECODER AV1 OUT COMP. Y/C PAUSE/R.A. EDIT ANT. IN RF OUT S OUT R L AUDIO OUT JLIP SYNCHRO EDIT I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I.
56 EN SUBSIDIARY SETTINGS T uner Set IMPORT ANT Perform the following steps only if — — Auto Channel Set has not been set correctly by Auto Set Up function or by Preset Download ( Z pg. 6, 8). — you have moved to a different area or if a new station starts broadcasting in your area.
EN 57 PERFORM AUTO CHANNEL SET 6 Press OK twice. ● Y ou can set up the recorder's tuner also by Preset Download ( Z pg. 8). ● The Auto Set screen appears, and remains on screen while the recorder searches for receivable stations. As Auto Channel Set progresses, the " " mark on the screen moves from left to right.
58 EN SUBSIDIARY SETTINGS (cont.) A TTENTION Guide Program numbers are not set when channels are stored manually . If an attempt is made at timer program- ming with S HOW V IEW in this state, the “GUIDE PROG SET” screen appears; set the Guide Program numbers on this screen.
EN 59 Perform steps 1 and 2 of "Storing Channels Manually" on page 58 to access the C onfirmation screen before continuing. Change Station Channel Position SELECT ITEM 1 Press % fi @ # until the item you want to move begins blinking. Then press OK and the station name (ID) and its channel (CH) number begin blinking.
60 EN SUBSIDIARY SETTINGS (cont.) SELECT ST A TION NAME CHARACTER 1 Press # until the first letter of the station name begins blinking. ENTER NEW CHARACTER 2 Press %fi to cycle through the characters (A–Z, 0–9, –, * , +, (space) ) and stop when the desired character is indicated, then press # to enter .
EN 61 TV Station And ID List ID* ST ATION NAME 1000 TV1000 3SA T 3SA T ADL T ADUL T ANT3 ANTENA3 ARD ARD AR TE AR TE BBC BBC GROUP BBC1 BBC1 BBC2 BBC2 BR3 BA YERN3 C+ CANAL PLUS C1 POR TUGUSES CAN5 CA.
62 EN SUBSIDIARY SETTINGS (cont.) Perform steps 1 and 2 of "Storing Channels Manually" on page 58 to access the C onfirmation screen before continuing. SELECT CHANNEL TO FINE-TUNE 1 Press % fi @ # until the channel you want to tune begins blinking.
EN 63 V ideo Channel (RF Output Channel) is the channel on which your TV receives picture and sound signals from the video recorder through the RF cable.
64 EN Just Clock The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal. The Just Clock option can be set "ON" or "OFF" at the Clock Set screen (the default setting is "OFF").
EN 65 NOTES: ● Just Clock (when set to "ON") adjusts the recorder's built-in clock every hour , except for 23:00, 0:00, 1:00 and 2:00. ● Just Clock is not effective when . . . – the recorder’s power is on. – the recorder is in the T imer mode.
66 EN S HOW V IEW Setup IMPORT ANT Normally , Auto Set Up ( Z pg. 6), Preset Download ( Z pg. 8) or Auto Channel Set ( Z pg. 56) sets the Guide Program Numbers automatically . Y ou need to set the Guide Program Numbers manually only in the following cases.
EN 67 TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your video recorder off for repair . POSSIBLE CAUSE ● The mains power cord is discon- nected.
68 EN CORRECTIVE ACTION Re-perform the clock and/or timer settings. Press ‰ and confirm that “ ‰ “ is displayed on the display panel. T imer programming can’t be performed while a timer recording is in progress. W ait until it finishes. Load a cassette with the Record Safety tab intact, or cover the hole using adhesive tape.
EN 69 QUESTIONS AND ANSWERS PLA YBACK Q. What happens if the end of the tape is reached during playback or search? A. The tape is automatically rewound to the beginning. Q. Can the video recorder indefinitely remain in the still mode? A. No. It stops automatically after 5 minutes to protect the heads.
70 EN INDEX FRONT VIEW S-VIDEO VIDEO ( MONO ) L – AUDIO – R STANDBY/ON TV PROG REC LINK DIGITAL TBC/NR REVIEW SP VPS/PDC VCR + 8 4 0 6 15dB NORM S L O W S L O W JOG SHUTTLE 8 REW FF TIMER SYNCHRO EDIT INSERT A.DUB SP / LP 1 3 4 7 ) q 8 ( ^ $ % 6 5 9 0 # & 2 ! * @ 1 ST ANDBY/ON Button Z pg.
EN 71 AV1 IN/OUT AV2 IN/DECODER AV1 OUT COMP. Y/C PAUSE/R.A. EDIT ANT. IN RF OUT S OUT R L AUDIO OUT JLIP SYNCHRO EDIT 1 ! 3 2 4 7 8 0 6 5 9 REAR VIEW DISPLA Y P ANEL REVIEW SP VPS/PDC VCR + 8 4 0 6 15dB NORM # @ ! 0 $ % 9 1 5 6 8 7 3 4 2 7 ANT . IN Connector Z pg.
72 EN REMOTE CONTROL 123 456 789 1 2 3 4 1 2 3 4 VCR TV CABLE /SAT TV /V CR – –:– – AU DI O 0000 ST AR T DE BU T ST OP FI N DA TE TV PR OG DA IL Y/ QT DN .
EN 73 Remote Contr ol LCD The remote control can operate not only the video recorder but also some of your TV and satellite tuner's functions. The LCD indicates which of these (VIDEO, TV or CABLE/SA T) the remote control can currently operate.
74 EN SPECIFICA TIONS GENERAL Power requirement : AC 220 – 240 V ` , 50/60 Hz Power consumption Power on : 24 W Power off : 5.7 W T emperature Operating : 5°C to 40°C Storage : –20°C to 60°C Operating position : Horizontal only Dimensions (WxHxD) : 437 x 97 x 347 mm W eight : 4.
EN 75 MEMO.
HR-S8600EU COPYRIGHT © 1999 VICTOR COMPANY OF JAPAN, LTD. EU Auto Set Up – referring to the display panel The Auto Set Up function sets the tuner channels, clock and Guide Program numbers automatically . BEFORE YOU ST ART PLEASE MAKE SURE THA T : n The TV aerial cable is connected to the ANT .
An important point after buying a device JVC HR-S8600EU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC HR-S8600EU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC HR-S8600EU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC HR-S8600EU you will learn all the available features of the product, as well as information on its operation. The information that you get JVC HR-S8600EU will certainly help you make a decision on the purchase.
If you already are a holder of JVC HR-S8600EU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC HR-S8600EU.
However, one of the most important roles played by the user manual is to help in solving problems with JVC HR-S8600EU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC HR-S8600EU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
