Instruction/ maintenance manual of the product HR-S8010UM JVC
Go to page of 16
P age 1 May 2, 2003 10:12 am — 1 — ENGLISH VIDEO CASSETTE RECORDE R HR-S8010UM INSTR UCTIONS LPT0756-001A Printed in China COPYRIGHT © 2003 VICT OR COMP ANY OF J AP AN, L TD . 0503-AH-PJ-BJ CONTENTS Buttons, Connectors and Indicato rs ...........
P age 2 May 2, 2003 10:12 am — 2 — ● Cassettes marked “S-VHS” and “V HS” can be used with this video cassette recorder. Howev er, S-VHS recordings are possible only with cassettes marked “S-VHS”. By using S-VHS ET it is possible to record and play back with S-VHS picture quality on VHS cassettes with this VCR.
P age 3 May 2, 2003 10:12 am — 3 — Butt ons , Connect ors and Indicat ors Front Panel Rear Panel S-VIDEO VIDEO (MONO)L–AUDIO–R POWER REC P AUSE CH PLA Y STOP/EJECT Cassette loading slot VIDEO/.
P age 4 May 2, 2003 11:22 am — 4 — Remote On-screen display If you press OSD ( OK ) on the Remote when “SUPERIMPOSE” is set to “ON”( 墌 pg. 13), you can see the current VCR status on the TV screen. T o clear the time counter , press OSD ( OK ) again.
P age 5 May 2, 2003 10:12 am — 5 — Basic Connections A Check contents Make sure the pac kage contains all of the acc essories listed in “Specifications”( 墌 pg. 16). B Situate VCR Place the VCR on a stable, horizontal surface. C Connect VCR to TV RF Connection A Disconnect the TV antenna from the TV .
P age 6 May 2, 2003 10:12 am — 6 — Initial Settings Plug&Play Setting A Perform Plug&Play setup Press 1 . ● T he Language Se lect screen appears. B Select language Press rt to mov e the highlight bar (arrow) to your desired language (ENGLISH or ESP AÑOL), then press OK or e .
P age 7 May 2, 2003 10:12 am — 7 — T uner Setting Setting channels automatically — Auto Channel Set P erform Auto Channel Set only if channels ha ve not been set correctly by the Plug&Pla y setting. A Access Main Menu screen, then T uner Set screen Press MENU on the Remo te.
P age 8 May 2, 2003 10:12 am — 8 — Playback Basic Playback A Load a cassette Make sure the window side is up, th e re ar label side is facing you and the arrow on the front of the cassette is pointing towards the VCR. ● Do not apply too much pressure w hen inserting.
P age 9 May 2, 2003 10:12 am — 9 — Automatic operatio ns after rewinding — Next Function Memory T he Next Function Memory “tells” the VCR what to do after rewinding is complete. Ensure that the VCR is in stop mode. ● For A utomatic Playbac k Start Press REW ( 3 ), then press PLA Y ( 4 ) within 2 seconds.
P age 10 May 2, 2003 10:12 am — 10 — Recor ding Accidental er asure pre vention T o prevent accidental recording on a recorded cassette, remove its record safety tab. T o record on it later, cover the hole with adhesive tape. Basic Recording A Load a cassette Make sure the record safety tab is intact.
P age 11 May 2, 2003 10:12 am — 11 — Timer Recor ding Up to 8 timer recording programs can be made using Express timer programing method as far as a year in adv ance. Remember , the clock must be set before you can program the timer. NOTES: ● If all the 8 programs ha ve alread y been set, “PROGRAM FULL ” appears on the TV screen.
P age 12 May 2, 2003 10:12 am — 12 — Program overlap warning display If “PROGRAM NOT COMPLETED PROGRAM O VERLAP” appears, you ha ve another program ov erlapping the program you hav e just made. T he Progr a m Check sc reen appears and conflicting programs will start blinking.
P age 13 May 2, 2003 10:12 am — 13 — Function settings Y ou can use the other useful functio n settings on the Function Set screen. A Access Main Menu screen, then Function Set screen Press MENU on the Remote. Press rt to move the highlight bar (arrow) to “FUNCTION SET”, then press OK or e .
P age 14 May 2, 2003 10:12 am — 14 — 䡵 BLUE BACK — ON /OFF When this function is set to “ON”, the TV screen becomes all blue when recei ving a channel not in use. NOTE: When you w ant to receive an unstable c hannel with poor signals, set this function to “OFF”.
P age 15 May 2, 2003 10:12 am — 15 — Editing Y ou can use your VCR as the pla y back or recording VCR. Y ou can use a camcorder as the playbac k VCR and your VCR as the recording VCR. Refer also to the other components’ instruction manuals for connection and its operations.
P age 16 May 2, 2003 10:12 am — 16 — Specifications Specifications shown are for SP mode unless specified other wise. E. & O.E. Design and specifications subject to c hange without notice. GENERAL P ower requirement : A C 110 V – 220 V d , 50 Hz/60 Hz P ower consumption P ower on : 16 W P ower off : 3.
An important point after buying a device JVC HR-S8010UM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC HR-S8010UM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC HR-S8010UM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC HR-S8010UM you will learn all the available features of the product, as well as information on its operation. The information that you get JVC HR-S8010UM will certainly help you make a decision on the purchase.
If you already are a holder of JVC HR-S8010UM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC HR-S8010UM.
However, one of the most important roles played by the user manual is to help in solving problems with JVC HR-S8010UM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC HR-S8010UM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
