Instruction/ maintenance manual of the product HR-S7600AM JVC
Go to page of 64
H R-S7600AM VIDEO CASSETTE RECORDER INSTRUCTIONS LPT0297-001A T V P R O G + T V V O L – T V P R O G – T V V O L + VCR CANCEL TIMER START STOP DATE PUSH JOG MENU OK TV PROG TV/VCR (MONITOR) C.
2 EN SAFETY FIRST IMPORT ANT n Please read the various precautions on this page before installing or oper ating the recorder . n It should be noted that it may be unlawful to re-record pre-recorded ta.
EN 3 T he ST ANDBY/ON button does not completely shut off mains power from the unit, but s witches oper ating current on and off. " " shows electrical power standb y and " " shows ON. Failure to heed the following precautions may result in damage to the recorder , remote control or video cassette.
4 EN Basic Connections CHECK CONTENTS 1 Make sure the package contains all of the accessories listed in "SPECIFIC A TIONS" ( Z pg. 63). SITUA TE RECORDER 2 Place the recorder on a stable, horizontal surface. CONNECT RECORDER TO TV 3 The connection method you use depends on the type of TV you have.
EN 5 OUT L AUDIO R VIDEO IN EDIT SYNCHRO PAUSE/R.A.EDIT RF OUT ANT. IN IN (S- -1) OUT S VIDEO JLIP CONNECT RECORDER TO TV 1 a– Connect the aerial, recorder and TV as per "RF CONNECTION" ( Z pg. 4). b– Connect the recorder's S VIDEO OUT connector to the TV's S-VIDEO IN connector .
6 EN V ideo Channel Set INITIAL SETTINGS V ideo Channel (RF Output Channel) is the channel on which your TV receives picture and sound signals from the video recorder through the RF cable. If you have connected the video recorder to your TV via the provided RF cable only (RF connection) – Go to "With RF Connection" below .
EN 7 (Ex.) If channel 50 is available in your area SET VIDEO CHANNEL 3 Set your TV to UHF channel 36. ● If the two vertical w hite bars appear clearly on the screen as shown in the illustration ( Z "TEST SIGNAL" on page 6), press OK and then go to step 4 .
8 EN 123 456 7 89 0 2 4 1 3 INITIAL SETTINGS (cont.) Auto Set Up Before starting, make sure of the following: ● T he TV aerial cable should be connected to the recorder . ● The recorder's mains power cord should be connected to a mains outlet.
EN 9 0 4 1 3 AUTO CH SET PLEASE WAIT ST ART FINISH TV Screen When Auto Set Up is completed, the lo west position number will appear on the front display panel. During Auto Set Up "PLEASE W AIT" blinks on the screen and "Auto" blinks on the front display panel.
10 EN INITIAL SETTINGS (cont.) On-Screen Displays Y ou can choose whether or not to ha ve various operational indicators appear on screen, by setting this function ON or OFF . T urn on the TV and select the VIDEO channel (or A V mode). TURN ON THE RECORDER 1 Press .
EN 11 Select Language T urn on the TV and select the VIDEO channel (or A V mode). MAIN MENU FUNCTION SET TUNER SET INITIAL SET R.A. EDIT [ 5 / ∞ ] = [MENU] : EXIT TURN ON THE RECORDER 1 Press .
12 EN Clock Set T urn on the TV and select the VIDEO channel (or A V mode). TURN ON THE RECORDER 1 Press . ACCESS MAIN MENU SCREEN 2 Press MENU . ACCESS INITIAL SET SCREEN 3 Press PUSH JOG %fi to place the pointer next to "INITIAL SET", then press OK or PUSH JOG .
EN 13 123 456 7 89 0 2 4 1 3 REW FF JOG SHUTTLE STANDBY/ ON TIMER S-VHS ET STOP/EJECT DIGITAL TBC/NR PAUSE PLAY VIDEO S-VIDEO (S-2) ( MONO ) L —AUDIO— R TV PROG SYNCHRO EDIT SP/LP/EP COLOUR SYSTEM INSERT A.DUB REC PLA YBACK Basic Playback The easiest, most basic operation possible with your video recorder is tape pla yback.
14 EN PLA YBACK (cont.) Playback Features REW FF JOG SHUTTLE STANDBY/ ON TIMER S-VHS ET STOP/EJECT DIGITAL TBC/NR PAUSE PLAY VIDEO S-VIDEO (S-2) ( MONO ) L —AUDIO— R TV PROG SYNCHRO EDIT SP/LP/EP COLOUR SYSTEM INSERT A.
EN 15 Manual T racking Y our video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the TV PROG buttons. OVERRIDE AUTOMA TIC TRACKING 1 Press (SP/LP/EP) on the remote to engage manual tracking.
16 EN REW FF JOG SHUTTLE STANDBY/ ON TIMER S-VHS ET STOP/EJECT DIGITAL TBC/NR PAUSE PLAY VIDEO S-VIDEO (S-2) ( MONO ) L —AUDIO— R TV PROG SYNCHRO EDIT SP/LP/EP COLOUR SYSTEM INSERT A.
EN 17 Next Function Memory T he Next Function Memory "tells" the recorder what to do after rewinding. Before continuing, ensure that the recorder is in the Stop mode. a– F or A utomatic Start Of Playbac k After T ape Rewind... ...press REW , then press PLA Y within 2 seconds.
18 EN 123 456 7 89 0 2 4 1 3 REW FF JOG SHUTTLE STANDBY/ ON TIMER S-VHS ET STOP/EJECT DIGITAL TBC/NR PAUSE PLAY VIDEO S-VIDEO (S-2) ( MONO ) L —AUDIO— R TV PROG SYNCHRO EDIT SP/LP/EP COLOUR SYSTEM INSERT A.DUB REC PLA YBACK (cont.) TimeScan Y our recorder is equipped with the T imeScan function.
EN 19 Reverse F orward Searc h Pla y Slow-motion *Still Slow-motion Pla y Searc h -7x -5x -3x -1x -1/6x -1/18x 0 1/18x 1/6x 1x 2x 3x 5x 7x Audio is output.
20 EN 123 456 7 89 0 2 4 1 3 REW FF JOG SHUTTLE STANDBY/ ON TIMER S-VHS ET STOP/EJECT DIGITAL TBC/NR PAUSE PLAY VIDEO S-VIDEO (S-2) ( MONO ) L —AUDIO— R TV PROG SYNCHRO EDIT SP/LP/EP COLOUR SYSTEM INSERT A.DUB REC TV signals being received b y the recorder's built-in tuner can be recorded onto a video tape.
EN 21 123 456 7 89 0 2 4 1 3 REW FF JOG SHUTTLE STANDBY/ ON TIMER S-VHS ET STOP/EJECT DIGITAL TBC/NR PAUSE PLAY VIDEO S-VIDEO (S-2) ( MONO ) L —AUDIO— R TV PROG SYNCHRO EDIT SP/LP/EP COLOUR SYSTEM INSERT A.
22 EN Elapsed Recording Time Indication Y ou can check the exact time of a recording. SET COUNTER DISPLA Y 1 Press DISPLA Y until a counter reading appears on the dispay panel. RESET COUNTER 2 Press C. RESET before starting recording or pla yback. ● T he counter is reset to "0:00:00" and shows the exact elapsed time as the tape runs.
EN 23 Receiving Stereo And Bilingual Pr ogrammes Y our recorder is equipped with a Sound-Multiplex decoder (A2) and a Digital stereo sound decoder (NICAM) as well, making reception of stereo and bilingual broadcasts possible. When the channel is changed, the type of broadcast being received will be displayed on the TV screen for a few seconds.
24 EN RECORDING (cont.) A TTENTION ● S-VHS recording is possible only for P AL recordings made in the SP or LP mode, or NTSC recordings made in the SP mode. ● S-VHS ET recording is possible only for P AL recordings made in the SP mode, or NTSC recordings made in the SP mode.
EN 25 REW FF JOG SHUTTLE STANDBY/ ON TIMER S-VHS ET STOP/EJECT DIGITAL TBC/NR PAUSE PLAY VIDEO S-VIDEO (S-2) ( MONO ) L —AUDIO— R TV PROG SYNCHRO EDIT SP/LP/EP COLOUR SYSTEM INSERT A.DUB REC Super VHS ET Y our recorder is equipped with Super VHS ET that makes it possible to record with S-VHS picture quality on VHS cassettes.
26 EN REW FF JOG SHUTTLE STANDBY/ ON TIMER S-VHS ET STOP/EJECT DIGITAL TBC/NR PAUSE PLAY VIDEO S-VIDEO (S-2) ( MONO ) L —AUDIO— R TV PROG SYNCHRO EDIT SP/LP/EP COLOUR SYSTEM INSERT A.DUB REC 123 456 7 89 0 2 4 1 3 B.E.S.T . Picture System T urn on the TV and select the VIDEO channel (or A V mode).
EN 27 Recording ST ART RECORDING 1 Press and hold RECORD and press PLA Y on the remote, or press RECORD on the recorder . DURING B.E.S.T . B.E.S.T . COMPLETE ● The recorder spends approximately 7 seconds assessing the condition of the tape, then begins recording.
28 EN TIMER RECORDING G- CODE System Setup T urn on the TV and select the VIDEO channel (or A V mode). Guide Pr ogram Number Set ACCESS MAIN MENU SCREEN 1 Press MENU . ACCESS INITIAL SET SCREEN 2 Press PUSH JOG %fi to place the pointer next to "INITIAL SET", then press OK or PUSH JOG .
EN 29 ENTER RECEIVING CHANNEL POSITION NUMBER 5 Press PUSH JOG %fi or NUMBER keys to input the number of the recorder's channel position on w hich the Guide Program number's broadcast is received.
30 EN ACCESS G-CODE/ SHOWVIEW SCREEN 1 Press PROG . ENTER G-CODE NUMBER 2 Press the NUMBER keys to enter the G- CODE number of a programme you wish to record. ● If you make a mistake, press CANCEL and input the correct number . ACCESS G-CODE PROGRAMME SCREEN 3 Press OK , and the G- CODE Programme screen appears.
EN 31 RETURN TO NORMAL SCREEN 5 Press PROG or OK . "PROGRAM COMPLETED" appears on the screen for about 5 seconds, then normal screen appears. ● Repeat steps 1 – 5 for each additional programme. ENGAGE RECORDER'S TIMER MODE 6 Press TIMER .
32 EN 123 456 7 89 0 2 4 1 3 Express Timer Pr ogramming Remember , the clock must be set before y ou can programme the timer ( Z pg. 12). Before performing the following steps: ● Insert a cassette with the safety tab in place. The recorder will come on automatically .
EN 33 123 456 7 89 0 2 4 1 3 SET T APE SPEED 7 Press SP/LP/EP ( ) to set the tape speed. RETURN TO NORMAL SCREEN 8 After confirming all information is correct, press PROG or OK . "PROGRAM COMPLETED" appears on the screen for about 5 seconds, then normal screen appears.
34 EN TIMER RECORDING (cont.) Check, Cancel And Replace Pr ogrammes DISENGAGE TIMER MODE 1 Press TIMER , then press . ACCESS PROGRAMME CHECK SCREEN 2 Press PROG CHECK . ACCESS PROGRAMME SCREEN 3 Press PROG CHECK again to check more informa- tion. Each time y ou press PROG CHECK , the next programme's information appears.
EN 35 Auto Timer When the Auto T imer is set to ON, the timer is automatically engaged when the recorder power is turned off and automati- cally disengaged when the recorder is powered back on.
36 EN Remote A/B Code Switching T he remote control is capable of controlling two JVC video recorders independently; one set to respond to the remote control's A code control signals and the other set to respond to B code control signals.
EN 37 Contr ol Y our TV Using Additional Buttons Use the NUMBER keys, and the button, CANCEL button or TIMER button to select the TV's channel. ● With televisions under Code 01, 02, 03, 05, 07,.
38 EN 123 456 7 89 0 2 4 1 3 Preparation For Editing T urn on the TV and select the VIDEO channel (or A V mode). Advantages Of S-VHS V ideo Recorders Y ou can edit from VHS to S-VHS, from S-VHS to VHS, or , from S-VHS to S-VHS. ● From VHS to S-VHS: Record VHS playback signals in the S-VHS mode.
EN 39 123 456 7 89 0 2 4 1 Edit Fr om A Camcorder NUMBER "0" TV PROG Y ou can use a camcorder as the source play er and your video recorder as the recorder .
40 EN EDITING (cont.) T he Synchro Editing function synchronizes the start of the playbac k and recording operations when starting an edit operation using a camcorder with LANC connector and y our video recorder . Synchr o Editing MAKE CONNECTIONS 1 Connect your recorder to camcorder ( Z pg.
EN 41 Edit T o Or Fr om Another V ideo Recorder Y ou can use your video recorder as the source pla yer or the recording deck. MAKE CONNECTIONS 1 Connect the pla yer's AUDIO/VIDEO OUT connectors to the recorder's AUDIO/VIDEO IN connectors. ● Use the L connector for monaural connection.
42 EN REW FF JOG SHUTTLE STANDBY/ ON TIMER S-VHS ET STOP/EJECT DIGITAL TBC/NR PAUSE PLAY VIDEO S-VIDEO (S-2) ( MONO ) L —AUDIO— R TV PROG SYNCHRO EDIT SP/LP/EP COLOUR SYSTEM INSERT A.
EN 43 NOTES: ● When monitoring the sound during Audio Dubbing, the normal soundtrack is automatically selected. If you wish to hear the mixed sound (Hi-Fi + Normal soundtracks), press AUDIO on the remote control to select " NORM (HI FI + NORM)" ( Z pg.
44 EN 123 456 7 89 0 2 4 1 3 REW FF JOG SHUTTLE STANDBY/ ON TIMER S-VHS ET STOP/EJECT DIGITAL TBC/NR PAUSE PLAY VIDEO S-VIDEO (S-2) ( MONO ) L —AUDIO— R TV PROG SYNCHRO EDIT SP/LP/EP COLOUR SYSTEM INSERT A.DUB REC Insert editing replaces part of the recorded scene with new material.
EN 45 REW FF JOG SHUTTLE STANDBY/ ON TIMER S-VHS ET STOP/EJECT DIGITAL TBC/NR PAUSE PLAY VIDEO S-VIDEO (S-2) ( MONO ) L —AUDIO— R TV PROG SYNCHRO EDIT SP/LP/EP COLOUR SYSTEM INSERT A.DUB REC 123 456 7 89 0 2 4 1 3 ENGAGE INSER T EDITING 6 Press INSERT .
46 EN PAUSE/R.A.EDIT REMOTE PAUSE REW FF JOG SHUTTLE STANDBY/ ON TIMER S-VHS ET STOP/EJECT DIGITAL TBC/NR PAUSE PLAY VIDEO S-VIDEO (S-2) ( MONO ) L —AUDIO— R TV PROG SYNCHRO EDIT SP/LP/EP COLOUR SYSTEM INSERT A.
EN 47 LOCA TE EDIT -IN POINT 8 Find the point on the source tape from where y ou w ant the edited scene to begin by pressing PUSH JOG @ # or using the TIME SCAN SHUTTLE ring or the JOG dial, then press PROG . ● T he edit-in point is registered in memory and appears on the screen.
48 EN INFORMA TION ON J TERMINAL J T erminal (JLIP(Joint Level Inter face Pr otocol) Connector) T he J T erminal is used to connect the recorder to a personal computer or similar device to allow computerized control of the recorder during editing and certain other operations.
EN 49 OUT L AUDIO R VIDEO IN EDIT SYNCHRO PAUSE/R.A.EDIT RF OUT ANT. IN IN (S- -1) OUT S VIDEO JLIP I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I Connecting/ Us.
50 EN COLOUR SYSTEM AUTO NTSC 3.58 NTSC 4.43 NTSC PAL* PAL MESECAM INFORMA TION ON MUL TI-SYSTEM COMP A TIBILITY Setting Of The Colour System Select Buttons Use the COLOUR SYSTEM button on the front panel to select the colour system. Pressing this button changes the mode as illustrated on the left.
EN 51 Playback This recorder can play back all 3 types of recorded tape. VIDEO OUT AUDIO OUT RF OUT NTSC 4.43 MHz NTSC PAL MESECAM PAL MESECAM NTSC [ PAL NTSC 3.
52 EN 123 456 7 89 0 2 4 1 3 T urn on the TV and select the VIDEO channel (or A V mode). TUNER SET IMPORT ANT Perform the following steps only if auto channel set has not been set correctly by Auto Set Up function ( Z pg. 8) or if you have moved to a different area or if a new station starts broadcasting in your area.
EN 53 Manual Channel Set Store channels that were not stored during Auto Set Up ( Z pg. 8) or A uto Channel Set ( Z pg. 5 2). ACCESS TUNER SET SCREEN 1 P erform steps 1 – 3 of "Auto Channel Set" on page 52. ACCESS CHANNEL LIST 2 Press PUSH JOG %fi to place the pointer next to "CH EDIT", then press OK or PUSH JOG .
54 EN TUNER SET (cont.) Delete A Channel ACCESS TUNER SET SCREEN 1 P erform steps 1 – 3 of "Auto Channel Set" on page 52. ACCESS CHANNEL LIST 2 Press PUSH JOG %fi to place the pointer next to "CH EDIT", then press OK or PUSH JOG .
EN 55 Fine-T uning Channels ACCESS TUNER SET SCREEN 1 P erform steps 1 – 3 of "Auto Channel Set" on page 52. ACCESS CHANNEL LIST 2 Press PUSH JOG %fi to place the pointer next to "CH EDIT", then press OK or PUSH JOG .
56 EN TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can sav e you the trouble of sending your video recorder off for repair .
EN 57 CORRECTIVE ACTION Insert a cassette, or using adhesiv e tape, reseal the slot where the tab was removed. Set to the desired channel. Confirm that the source is properly connected. Confirm that all units' power switc hes are turned on. Set the input mode to "L-1", "F-1", "S- 1" or "S-2".
58 EN CORRECTIVE ACTION P osition the camcorder so its microphone is aw ay from the TV . T urn the TV's volume down. If you need the skipped c hannels, restore them. ( Z pg. 53) Press P AUSE to pause the recording, change c hannels, then press PLA Y to resume recording.
EN 59 QUESTIONS AND ANSWERS PLA YBACK Q. What happens if the end of the tape is reached during playback or search? A. The tape is automatically rewound to the beginning. Q. Can the video recorder indefinitely remain in the still mode? A. No. It stops automatically after 5 minutes to protect the heads.
60 EN REAR VIEW OUT L AUDIO R VIDEO IN EDIT SYNCHRO PAUSE/R.A.EDIT RF OUT ANT. IN IN (S- -1) OUT S VIDEO JLIP 7 8 4 5 0 ! 9 1 2 3 6 INDEX FRONT VIEW REW FF JOG SHUTTLE STANDBY/ ON TIMER S-VHS ET STOP/EJECT DIGITAL TBC/NR PAUSE PLAY VIDEO S-VIDEO (S-2) ( MONO ) L —AUDIO— R TV PROG SYNCHRO EDIT SP/L P/EP COLOUR SYSTEM INSERT A.
EN 61 DISPLA Y P ANEL 1 B .E.S.T . Picture System Displa y Z pg. 26 Audio Level Indicator 2 Symbolic Mode Indicators 3 "T imer" Indicator Z pg. 31, 33 4 S-VHS Indicator Z pg. 24 5 Channel Display Clock Display 6 T ape Speed Indicators Z pg. 20 7 Instant REVIEW Indicator Z pg.
62 EN INDEX (cont.) REMOTE CONTROL Buttons with a small dot on the left side of the name can also be used to operate your TV Z pg. 37. 1 TV Button Z pg. 37 2 VCR Button Z pg. 37 3 TV/VCR Button Z pg. 37 4 REVIEW Button Z pg. 17 5 NUMBER K eys Z pg. 20 6 C ANCEL Button Z pg.
EN 63 SPECIFICA TIONS GENERAL P ower requirement Rating : A C 110 – 240 V ` , 50/60 Hz Operating : AC 0 90 – 260 V ` , 50/60 Hz P ower consumption : 24 W T emperature Operating : 5°C to 40°C Storage : –20°C to 60°C Operating position : Horizontal only Dimensions (WxHxD) : 437 x 97 x 347 mm W eight : 4.
EN COPYRIGHT © 1999 VICTOR COMPANY OF JAPAN, LTD. AM Printed in Japan 1099IYV * YP * YP VICTOR COMP ANY OF JAPAN, LIMITE D HR-S7600AM ® ® Registered Trademark owned by VICTOR COMPANY OF JAPAN, LTD.
An important point after buying a device JVC HR-S7600AM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC HR-S7600AM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC HR-S7600AM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC HR-S7600AM you will learn all the available features of the product, as well as information on its operation. The information that you get JVC HR-S7600AM will certainly help you make a decision on the purchase.
If you already are a holder of JVC HR-S7600AM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC HR-S7600AM.
However, one of the most important roles played by the user manual is to help in solving problems with JVC HR-S7600AM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC HR-S7600AM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
