Instruction/ maintenance manual of the product HR-S7300U JVC
Go to page of 68
H R-S7300U VIDEO CASSETTE RECORDER INSTRUCTIONS PU30425-1827 For Customer Use: Enter below the Serial No. which is located on the rear of cabinet. Retain this information for future reference. Model No. HR-S7300U Serial No. w Channel Changer Cable REW FF JOG SHUTTLE POWER MENU CH/ SET A.
2 Dear Customer , Thank you for pur chasing the JVC VHS video cassette recorder . Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new VCR. CAUTIONS W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
3 IMPOR T ANT PRODUCT SAFETY INSTRUCTIONS Electrical ener gy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety .
4 SERVICING 1. Servicing If your product is not operating correctly or exhibits a marked change in performance and you are unable to restore normal operation by following the detailed procedure in its operating instructions, do not attempt to service it yourself as opening or removing covers may expose you to dangerous voltage or other hazards.
5 CONTENTS T IMER RECORDING 39 Instant Timer Recording (ITR) ............... 39 VCR Plus+ Timer Programming ............ 40 On-Screen Timer Programming ........... 42 Check And Cancel Programs .......................... 44 Auto T imer ................
6 INST ALLING YOUR NEW VCR Connections Antenna or Cable Flat Feeder Matching T ransformer (Not supplied) Basic Connections CHECK CONTENTS 1 Make sure the package contains all of the accessories listed in “SPECIFICA TIONS” ( Z pg. 62). SITUA TE VCR 2 Place the VCR on a stable, horizontal surface.
7 TV OUT NOTES: n T o make the most of Super VHS picture performance, we recommend you use the S-VIDEO connection. n T o operate the VCR with your TV using the S VIDEO connec- tion, set your TV to the A V mode using the TV's remote control. Y ou can also use the TV/VIDEO button on the VCR's remote control to set your TV to the A V mode.
8 INITIAL SETTINGS Clock A TTENTION CABLE BOX SUBSCRIBERS If you perform the Advanced Auto Clock Set procedure . . . ● Select the PBS channel on your cable box before plugging your VCR’ s power plug into the AC outlet.
9 9 3 6 8 2 5 7 1 4 0 Clock Setting Perform clock setting only if the clock has not been set correctly by Advanced Auto Clock Set. Access the Override Auto Clock Set screen to choose the Auto, Semi-Auto or Manual clock setting procedure. Each procedure starts from step 5.
10 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 INITIAL SETTINGS (cont.) SELECT MODE 5 At the Override Auto Clock Set screen, place the arrow next to “SEMI- AUT O CLOCK SET” by pressing SET +/– , then press SELECT .
11 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 SELECT D.S.T . MODE 9 Y ou have three choices: a– Select “AUTO” and the adjustment to your VCR’ s clock will be made according to the incoming signal from the host channel.
12 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Language This VCR offers you the choice to view on-screen messages in English, Spanish or French (not including messages superimposed on the TV picture).
13 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 T uner Set Receivable Channels TURN ON THE VCR 1 Press POWER .
14 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 PERFORM AUTO CHANNEL SET 6 Place the arrow next to "AUT O CHANNEL SET" by pressing SET +/– , then press SELECT .
15 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Add Or Delete A Channel ACCESS TUNER SET SCREEN 1 Access by performing steps 2 and 3 of the T uner procedure on page 13. ● T o add a channel, go to step 2 .
16 This procedure is required if you receive your TV channels through a cable box (descrambler). The Cable Box Controller allows the VCR to automatically switch the cable box channel during timer-recording. The Cable Box Controller is effective for recording shows that have been programmed using VCR Plus+ ( Z pg.
17 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Set Cable Box Output Channel TURN ON THE VCR 1 Press POWER . ACCESS MAIN MENU SCREEN 2 Press MENU as many times as necessary . ACCESS CUSTOM SET SCREEN 3 Press SET +/– to place the arrow next to “CUST OM SET”, then press SELECT .
18 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 SELECT CABLE BOX OUTPUT CHANNEL 6 Y our selection depends on how your cable box is connected to your VCR. If your cable box is connected to your VCR using an RF connection .
19 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 RETURN TO NORMAL SCREEN 4 Press MENU as many times as necessary .
20 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 The VCR Plus+ timer programming system eliminates the need to input channel, date, start and stop time data when setting the timer record function.
21 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ACCESS TUNER SET SCREEN 3 Press SET+/– to place the arrow next to “TUNER SET”, then press SELECT . ACCESS GUIDE CHANNEL SET SCREEN 4 Press SET+/– to place the arrow next to “GUIDE CHANNEL SET”, then press SELECT .
22 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 INPUT RECEIVING CHANNEL NUMBER 6 Press SET+/– or the appropriate DIGIT keys to input the number of the channel on which the Guide Channel’ s broadcasts are received.
23 SIMPLE PLA YBACK AND RECORDING LOAD A CASSETTE 1 Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the VCR. Don’ t apply too much pressure when inserting. ● The VCR’ s power comes on automatically .
24 Simple Recording LOAD A CASSETTE 1 Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette. ● If you use the RF connection, by pressing the TV/VIDEO button, select VIDEO mode to view the program to be recorded.
25 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 PLA YBACK AND RECORDING FEA TURES Playback T ake advantage of special functions possible with the recorder ’ s controls or the remote control.
26 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 V ariable-Speed Search/ Reverse Motion Playback PLA YBACK AND RECORDING FEA TURES (cont.
27 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Manual T racking Once playback begins, the VCR’ s automatic tracking function is engaged. If noise appears in the picture, you can override this and make the adjustment manually .
28 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Dynamic Contrast Use this function to improve contrast which tends to degrade specially with wide-screen pictures. PLA YBACK AND RECORDING FEA TURES (cont.
29 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Select The Soundtrack Y our VCR can record two soundtracks simultaneously (Normal and Hi-Fi) and play back the selected one, or both together .
30 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Superimpose This function, switchable between ON and OFF , determines whether or not operational indicators will appear on screen. ACCESS MAIN MENU SCREEN 1 Press MENU as many times as necessary .
31 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 9 3 6 8 2 5 7 1 4 0 Index Search This function seeks out index codes that are placed on the tape at recording start. ST AR T SEARCH 1 While the tape is stopped, press SEARCH T or Y .
32 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Instant ReView At the press of a button, you can power up your VCR, rewind the tape and begin viewing the most recent timer -recorded program.
33 Next-Function Memory The Next Function Memory “tells” the VCR what to do after rewinding. * Before continuing, ensure that the VCR is in stop mode. a– For Automatic Start Of Playback After T ape Rewind . . . . . . press REW , then press PLAY within 2 seconds.
34 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ACCESS FUNCTION SET SCREEN 4 Press SET+/– to place the arrow next to “FUNCTION SET”, then press SELECT . ACCESS SPECIAL FUNCTION SCREEN 5 Press SET+/– to place the arrow next to “SPECIAL FUNCTION”, then press SELECT .
35 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Record One Pr ogram While W atching Another Recording Display Elapsed Recording Time ENGAGE TV MODE 1 During recording... ● Press TV/VIDEO .
36 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Stereo And SAP (Second Audio Pr ogram) Y our VCR’s built-in MTS decoder enables reception of Multi- channel TV Sound broadcasts.
37 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Hi-Fi Audio Recording Level Contr ol Y our VCR allows manual adjustment of the Hi-Fi audio recording level.
38 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 RETURN TO NORMAL SCREEN 7 Press MENU as many times as necessary to exit. NOTE: Noise will increase if the recording level is too low , while distortion will increase if the level is too high.
39 Instant Timer Recording (ITR) This easy method lets you record for from 30 minutes to 9 hours (selectable in 30-min. increments), and shuts the VCR off after recording is finished. ST AR T RECORDING 1 Press REC on the front panel. ENGAGE ITR MODE 2 Press REC again.
40 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 VCR Plus+ Timer Pr ogramming TIMER RECORDING (cont.
41 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 CHECK/CORRECT INPUT DA T A 6 If the data is correct as it is, go to step 7 . If not, press SELECT until the item you want to change begins to blink.
42 On-Screen Timer Pr ogramming Y ou can directly program the VCR’s timer to record up to 8 shows, as far as a year in advance. Remember , the clock must be set before you can program the timer ( Z pg. 8 or 9). TIMER RECORDING (cont.) LOAD A CASSETTE 1 Make sure the record safety tab is intact.
43 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MAKE CORRECTIONS 6 T o change any of the settings, press SELECT until the item you want to change begins blinking. Then set as in step 5 .
44 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 TIMER RECORDING (cont.) DISENGAGE TIMER 1 Press TIMER , then press POWER . ACCESS MAIN MENU SCREEN 2 Press MENU as many times as necessary .
45 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ACCESS MAIN MENU SCREEN 1 Press MENU as many times as necessary . ACCESS FUNCTION SET SCREEN 2 Place the arrow next to "FUNCTION SET" by pressing SET +/– , then press SELECT .
46 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 9 3 6 8 2 5 7 1 4 0 EDITING Edit Fr om A Camcorder Y ou can use a camcorder as the player and your VCR as the recorder .
47 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 RETURN TO FUNCTION SET SCREEN 8 Press MENU . ACCESS T APE DUB MODE SCREEN 9 Press SET +/– to place the arrow next to “T APE DUB MODE”, then press SELECT .
48 Edit T o Or Fr om Another VCR Y ou can use your VCR as the player or the recorder . MAKE CONNECTIONS 1 Connect an AV cable between the player’ s VIDEO OUT and AUDIO OUT connectors and the recorder’s VIDEO IN and AUDIO IN connectors.
49 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Assemble Editing Assemble Editing adds one recorded scene to another in succession. T o use your VCR as the recorder ... LOAD CASSETTES 1 Insert the original cassette in the player , and the recording cassette in the recorder .
50 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Insert editing replaces part of the recorded scene with new material. Both the picture and Hi-Fi audio soundtrack are replaced with new ones, while the normal audio soundtrack remains unchanged.
51 9 3 6 8 2 5 7 1 4 0 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ENGAGE INSER T EDITING 7 Press INSERT . ● Y our VCR enters the Insert-Pause mode. (REC, PLA Y and P AUSE light up on the front display panel.
52 PAUSE/ SPECIAL FUNCTION REMOTE PAUSE + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 This function makes it easier to create edited videos when your VCR is used as the source player in combination with another VCR equipped with a Remote P AUSE Connector .
53 END R.A. EDIT 11 Press MENU as many times as necessary to return to the normal screen, and engage the Stop mode for the both VCRs. NOTES: ● Y ou can also monitor the sound when sear ching for scenes you want to edit in steps 7 – 8 .
54 + – 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Audio dubbing replaces the normal audio sound of a previously recorded tape with a new soundtrack.
55 9 3 6 8 2 5 7 1 4 0 SPECIAL FEA TURES TV Multi-Brand Remote Contr ol The VCR's remote control can control several functions on JVC remote control TVs and on the brands of remote control TVs listed below . TURN ON THE TV 1 T urn the power on using the TV's remote control.
56 9 3 6 8 2 5 7 1 4 0 SPECIAL FEA TURES (cont.) Cable Box Multi-Brand Remote Control The VCR's remote control can control functions on the brands of cable boxes listed below . Some cable box brands have more than one code. If your cable box does not function with a specified code, try other codes.
57 DSS Receiver Multi-Brand Remote Control The VCR's remote control can control functions on the brands of DSS (Digital Satellite System) receivers listed below . TURN ON THE DSS RECEIVER 1 T urn the power on using the DSS receiver's remote control.
58 TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your VCR off for repair . POWER POSSIBLE CAUSE ● The power cord is disconnected.
59 CORRECTIVE ACTION Check or re-perform the clock/timer settings to ensure correctness. Press TIMER and check to make sure that TIMER appears on the front display panel. Re-perform the set-up procedures. Make sure you have compensated for Guide Channel and VCR or cable box channel number mismatches ( Z pg.
60 8. T imer recording begins as sched- uled, but the channel is always incorrect. 9. W e moved, and now VCR Plus+ doesn’t work properly . 10. “PROGRAM FULL” is displayed on the VCR Plus+ screen. ● Even though you don't use an external Cable Box, "CABLE BOX OUTPUT" is set to "ON".
61 QUESTIONS AND ANSWERS PLA YBACK Q. What happens if the end of the tape is reached during playback or search? A. The tape is automatically rewound to the beginning. Q. Can the VCR indefinitely remain in the still mode? A. No. It stops automatically after 5 minutes to protect the heads.
62 GENERAL Power requirement : AC 120 V ` , 60 Hz Power consumption : 26 W T emperature Operating : 5°C to 40°C (41°F to 104°F) Storage : –20°C to 60°C (–4°F to140°F) Operating position : Horizontal only Dimensions (W x H x D) : 426 x 94 x 341 mm (16-13/16" x 3-3/4" x 13-7/16") W eight : 4.
63 INDEX List Of T erms This guide serves as a quick way to locate frequently used terms and on-screen display names. The first page on which the term appears is listed. Most terms appear more than once in the instruction manual. A A/B Code ..........
64 INDEX (cont.) FRONT VIEW REAR VIEW 1 Power Cord ( Z pg. 6) 2 V ideo Output Connector ( Z pg. 6) 3 V ideo Input Connector ( Z pg. 48) 4 ANTENNA IN Connector ( Z pg. 6) 5 Audio Output Connector [L] ( Z pg. 6) 6 Audio Output Connector [R] ( Z pg. 6) 7 Audio Input Connector [R] ( Z pg.
65 FRONT DISPLA Y P ANEL 2 L dB –20 15 10 8 4 62 0 2 4 6 + 8 R dB –20 15 10 8 4 62 0 2 4 6 + 8 HM S REC SAP PAUSE ST PLAY I T R TIMER VIDEO M SP EP AM PM 4 8 7 6 0 9 1 $ # 3 5@ ! ** If the remote control doesn't work properly , remove its batteries, wait a short time and then try again.
66 HOW TO LOCA TE YOUR JVC SERVICE CENTER TOLL FREE: 1-800-252-5722 JVC SER VICE & ENGINEERING COMP ANY OF AMERICA DIVISION OF US JVC CORP . F ACTORY SERVICE CENTER LOCA TIONS If you ship the product.
67 LIMITED WARRANTY CONSUMER VIDEO 1-90 JVC COMP ANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONL Y TO THE ORIGINAL PURCHASER A T RET AIL to be FREE FROM DEFECTIVE MA TERIALS AND WORKMANSHIP from the date of original retail purchase for the period as shown below .
EN HR-S7300U COPYRIGHT © 1996 VICTOR COMPANY OF JAPAN, LTD. U Printed in Japan 0696HOV * UN * VP VICTOR COMP ANY OF JAPAN, LIMITED.
An important point after buying a device JVC HR-S7300U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC HR-S7300U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC HR-S7300U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC HR-S7300U you will learn all the available features of the product, as well as information on its operation. The information that you get JVC HR-S7300U will certainly help you make a decision on the purchase.
If you already are a holder of JVC HR-S7300U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC HR-S7300U.
However, one of the most important roles played by the user manual is to help in solving problems with JVC HR-S7300U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC HR-S7300U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
