Instruction/ maintenance manual of the product HR-J791AM JVC
Go to page of 16
P age 1 April 11, 2002 2:44 pm VIDEO CASSETTE RECORDER HR-J797AM HR-J791AM INSTR UCTIONS LPT0687-001A Printed in Malaysia COPYRIGHT © 2002 VICTOR COMPANY OF JAPAN, LTD. 0402 MNV f PJ f PJ Safety Precautions T he rating plate and the safety caution are on the rear of the unit.
P age 2 April 11, 2002 2:44 pm 3. DO NOT pla ce hea vy objects on the recorder or remote control. 4. DO NOT place an ything whic h might spill on top of the recorder or remote control. (If water or liquid is allowed to enter this equipment, fire or electric shoc k may be ca used.
P age 3 April 11, 2002 2:44 pm Remote control * Not function with this recorder . On-screen display When “ O.S .D. ” is set to “ ON ” , the superimposed in dication on the TV screen tells you wh at the recorder is doing.
P age 4 April 11, 2002 2:44 pm Initial Settings Video Channel Set V ideo channel (RF output channel) is the channel on which your TV receives picture and sound signals f rom the video recor der through the RF cable.
P age 5 April 11, 2002 2:44 pm Language Setting A Access Main Menu screen, then Initial S et screen Press MENU on the remote control. Press rt to place the pointer next to “ INITIAL SET ” , then press OK or e . B Access Language Select screen Press rt to place the pointer next to “ L A N GUA G E ” , then press OK or e .
P age 6 April 11, 2002 2:44 pm Playback Features Adjusting tracking condition — tracking adjustment Automatic trac king adjustment Whenever you insert a tape and start pla yback, automatic trac king starts working and continuously analyzes the signal to enable optimum picture quality during playbac k.
P age 7 April 11, 2002 2:44 pm Recor ding Accidental er asure pre vention T o prevent accidental recording on a recorded cassette, remo ve its record safety tab. T o record on it late r, cover the hole with adhesive tape. Basic Recording A Load a cassette Make sure the record safety tab is intact.
P age 8 April 11, 2002 2:44 pm Timer Reco rding Up to 8 timer recording programs can be made using G- CODE / S HOW V IEW timer programing or Express timer programing method as far as a year in advance. Remember , the clock must be set before you can progr am the time r.
P age 9 April 11, 2002 2:44 pm Express T imer Programing ● Remember , the clock must be set before you can program the timer . ● Load a cassette with the record safety tab intact.
P age 10 April 11, 2002 2:44 pm ● If the overlap is not y et solved, the conflicting programs will be shown on the Program check screen. Rep eat the above steps again.
P age 11 April 11, 2002 2:44 pm 䡵 AUTO SP ] LP TIMER — ON / OFF When this function is set to “ ON ” , the recorder automatically switches to LP mode to allo w complete recording if there is not enough tape to record the entire program while timer -recording in SP mode.
P age 12 April 11, 2002 2:44 pm Changing Remote Control Code T his remote control is capable of transmitting two control codes; one set to respond to A code control signals and another set to respond to B code control signals. T his remote control is preset to send A code signals because your recorder is initially set to respond to A code signals.
P age 13 April 11, 2002 2:44 pm Inf ormation on Multi-System Compatibility Off-Air Recording T he built-in multi-s ystem tuner is capable of receiving PAL B/G, I and D/K, and SECAM B/G and D/K and NTSC* broadcasts. Playback T his recorder can play ba ck all 3 types of recorded tape.
P age 14 April 11, 2002 2:44 pm T ape-T o-T ape Editing T here are 4 different types of recorded tape, depending on the signal recorded. T uner Setting IMPORT ANT P erform the following steps only if .
P age 15 April 11, 2002 2:44 pm E Set desired station T he screen to the rig ht appears when a station is detected. If you do n o t want to store the detected station... Press rt to place the pointer next to “ CONTINUE ” , then press OK or e . Channel searc h will resume.
P age 16 April 16, 2002 12:21 pm Specifications Specifications shown are for SP mode unless specified oth erwise. E. & O.E. Design and specifications subject to c hange without notice.
An important point after buying a device JVC HR-J791AM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC HR-J791AM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC HR-J791AM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC HR-J791AM you will learn all the available features of the product, as well as information on its operation. The information that you get JVC HR-J791AM will certainly help you make a decision on the purchase.
If you already are a holder of JVC HR-J791AM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC HR-J791AM.
However, one of the most important roles played by the user manual is to help in solving problems with JVC HR-J791AM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC HR-J791AM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
