Instruction/ maintenance manual of the product HR-J790EU JVC
Go to page of 16
—1— December 21, 2001 9:51 am P age 1 ENGLISH Master P age: Cov er VIDEO CASSETTE RECORDER HR-J790EU HR-J794EU INSTR UCTIONS LPT0627-001A Printed in Malaysia COPYRIGHT © 2001 VICT OR COMP ANY OF J AP AN, L TD . 1201 MNV f ID f PJ SAFETY FIRST ...
December 22, 2001 4:33 pm P age 2 —2— Master P a ge: Right When the equipment is installed in a cabinet or a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear).
December 21, 2001 9:51 am P age 3 —3— Master P a ge: Right Remote control * PDC recording is not possib le in Central and Easter n Europe. On-screen display If you press OK / on the remote control when “O .S.D.” is set to “ON” ( 墌 12), you can see the current recorder status on the screen.
December 22, 2001 5:03 pm P age 4 —4— Master P a ge: Right After the 1 is pressed for the first time to power on the recorder , the recorder starts Auto Set Up or Preset Download.
December 21, 2001 9:51 am P age 5 —5— Master P a ge: Right When you connect the recorder to y our TV via a fully-wired 21-pin SC ART cable, the following functions are av ailable. Y ou can use these functions only with a TV offering T-V Link, etc.
December 26, 2001 10:23 am P age 6 —6— Master P a ge: Right Basic Playback A Load a cassette Make sure the window side is up, the rear label side is facing you and the arro w on the front of the cassette is pointing tow ards the recorder . ● Do not apply too much pressure when inserting.
December 26, 2001 10:23 am P age 7 —7— Master P a ge: Right Playing back tape repeatedly (100 times) — Repeat Playback During pla yback, press and hold 4 for more than 5 seconds. “ $ ” on the displa y panel starts blinking slowly . T o stop playbac k, press 8 on the remote control or 0 on the recorder .
December 21, 2001 9:51 am P age 8 —8— Master P a ge: Right W atching one programme while recording another Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view .
December 22, 2001 5:05 pm P age 9 —9— Master P a ge: Right Up to 8 timer recording programmes can be made. Before starting: ● If you select a country in Central or Eastern Europe for country setting, perform “Guide Program Number Set” ( 墌 8).
December 21, 2001 9:51 am P age 10 —1 0— Master P a ge: Right 24 Hour Express T imer Programming Y ou can programme a timer recording that starts within 24 hours. A Press 24H EXPRESS # . T he start time indicator ( ) starts blinking on the display panel.
December 22, 2001 5:06 pm P age 11 —1 1— Master P a ge: Right Editing with another video recorder or a camcorder Y ou can use your recorder as the sour ce play er or the recording deck. Y ou can use a camcorder as the sour ce pla yer and y our recorder as the recording deck.
December 21, 2001 9:51 am P age 12 —1 2— Master P a ge: Right NOTE: When you select a country in Central or Eastern Europe for country setting, you cannot use decoder with this recorder .
December 21, 2001 9:51 am P age 13 —1 3— Master P a ge: Right F or example , recording a programme of 210 minutes in length onto a 180 minute tape. NOTES: ● If you ha ve programmed the recorder to timer -record 2 or more programmes, do not use this function, but c hange the tape speed manually during timer programming.
December 21, 2001 9:51 am P age 14 —1 4— Master P a ge: Right C Select language Press rt to place the pointer next to the desired language. D Perform Auto Channel Set Press OK twice. When Auto Channel Set is completed, “SC AN COMPLETED” is displa yed on the screen for about 5 seconds, then the Confirmation screen appears.
December 21, 2001 9:51 am P age 15 —1 5— Master P a ge: Right E Return to normal sc reen Press MENU . Changing station name (A) A Access Confirmation sc reen Pe r f o r m s t e p 1 1 1 1 of “Manual Channel Set” ( 墌 14). B Select position Press rt w e until the desired channel begins blinking, then press OK twice.
December 21, 2001 9:51 am P age 16 —1 6— Master P a ge: Right Video Channel Set V ideo channel (RF output channel) is the channel on w hich y our TV receiv es picture and sound signals from the recorder through the RF cable.
An important point after buying a device JVC HR-J790EU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC HR-J790EU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC HR-J790EU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC HR-J790EU you will learn all the available features of the product, as well as information on its operation. The information that you get JVC HR-J790EU will certainly help you make a decision on the purchase.
If you already are a holder of JVC HR-J790EU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC HR-J790EU.
However, one of the most important roles played by the user manual is to help in solving problems with JVC HR-J790EU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC HR-J790EU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
