Instruction/ maintenance manual of the product HR-J698U JVC
Go to page of 16
VIDEO CASSETTE RECORDE R HR-J698U INSTR UCTIONS LPT0635-001A Printed in China COPYRIGHT © 2001 VICT OR COMPANY OF JAP AN, L TD . 1201 MNV f PJ f BJ Dear Customer , T hank you for purch asing the JVC VHS video cassette re corder. Before use, please read the safety information and precautions to ensure safe use of your new VCR.
IMPOR T ANT PRODUCT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. T his product has been engineered and manufactured to assure your personal safety .
SERVICING 1. Servicing If your product is not operating correctly or exhibits a marked change in performance and y ou are unable to restore normal operation by follo wing the detailed procedure in its operating instructions, do not attempt to service it yourself as opening or removing cov e rs may expose y ou to dangero us voltage or other hazards.
Butt ons , Connect ors and Indicat ors Front Panel Rear Panel Displa y panel T imer mode indicator VCR mode indicator Play indicator Record indicator Channel and auxiliary input/Clock timer Infrared b.
Remote * The glow-in-the-dark buttons shown in w hite on the illustration above are helpful when using the Remote in darkened room s. On-screen display If you press OSD on the Remote w hen “ SUPERIMPOSE ” is set to “ ON ” , you can see the curren t VCR status on the TV screen.
D Perform Plug&Play setup Plug the AC po wer cord into an AC outlet. Do not turn on the VCR. T he clock and tuner channels will be set automatically. T he time and date can be set automatically by the clock setting data transmitted from one of the regular TV broadcast channels.
C Select D.S.T . mode Press OK or e to move the highlight bar to “ D. S . T . ” , then press rt repeatedly until the desired setting is selected. AUTO : Select if you w ant to adjust your VCR ’ s clock automatically by the incoming signal from the host channel.
Playback Basic Playback A Load a cassette Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the VCR. ● Do not apply too much pressure w hen inserting. ● T he VCR turns on, and the coun ter on the on-screen display is reset, automatically .
Playing back tape repeatedly (100 times) — Repeat Play During playbac k, press and hold PLA Y ( 4 ) fo r more than 5 seconds. T he pla y indicator ( $ ) on the display panel starts blinking slowly . T o stop playbac k , press STOP ( 8 ) on the Remote or STOP/EJECT ( 0 ) on the VCR.
Recording Features Specifying recording length — Instant Timer Recording (ITR) During recording, press REC ( 7 ) on the VCR repeatedly u ntil the recording length you w ant appears on the displa y panel. T he record indicator ( 䡬 ) on the display panel starts blinking.
T o use the VCR while it is in timer recording standby mode Press TIMER , then press POWER . After you use the VCR, press TIMER again to put the VCR into timer recordin g standby mode. Checking, canceling or changing program settings A Disengage timer Press TIMER , then press POWER .
Other Functions Checking tape position When you ch ange the VCR operation mode from the stop mode to fast forward or rewind mode, or when y ou perform an Index Search or Instant Review, the tape position indicator appears. T he position of “ q ” in relation to “ B ” (Beginning) or “ E ” (End) shows y ou where you are on the tape.
䡵 VIDEO ST ABILIZER — ON/ OFF When this function is set to “ ON ” , you can automatically correct vertical vibrations in the picture w hen pla ying back unstable recordings made on another VCR. NOTE: T o watch recordings with close-caption or w hen you finish viewing a tape, set this function to “ OFF ” .
Specifications Specifications shown are for SP mode unless specified otherwise. E. & O.E. Design and specifications subject to change without notice. GENERAL P ower requirement : AC 120 V d , 60 Hz P ower consumption Po w e r o n : 1 3 W P ower off : 1.
FOR SER VICING (Only in U.S.A.) HO W T O LOCA TE Y OUR JVC SER VICE CENTER JVC SER VICE & ENGINEERING COMP ANY OF AMERICA A CCESSORI ES Don’t service the product your self.
W ARRANTY (Only in U.S.A.) REFURBISHED PR ODUCTS CARR Y A SEP ARA TE W ARRANTY , THIS W ARRANTY DOES NO T APPL Y . FOR DET AILS OF REFURBISHED PR ODUCT W ARRANTY , PLEASE REFER T O THE REFURBISHED PR ODUCT W ARRANTY INFORMA TION P ACKA GED WITH EACH REFURBISHED PR ODUCT .
An important point after buying a device JVC HR-J698U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC HR-J698U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC HR-J698U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC HR-J698U you will learn all the available features of the product, as well as information on its operation. The information that you get JVC HR-J698U will certainly help you make a decision on the purchase.
If you already are a holder of JVC HR-J698U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC HR-J698U.
However, one of the most important roles played by the user manual is to help in solving problems with JVC HR-J698U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC HR-J698U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
