Instruction/ maintenance manual of the product HR-J695EA JVC
Go to page of 16
—1— August 6, 2002 2:00 pm P age 1 ENGLISH Master P age: Cov er VIDEO CASSETTE RECORDER HR-J695EA HR-J291EA INSTR UCTIONS LPT0724-001B Pr inted in Indonesia COPYRIGHT © 2002 VICT OR COMP ANY OF J AP AN, L TD . 0702 MNV f ID f OT SAFETY FIRST ....
June 24, 2002 11:44 am P age 2 —2— Master P a ge: Right When the equipment is installed in a cabinet or a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear).
June 24, 2002 4:13 pm P age 3 —3— Master P a ge: Right Front Panel A P ower Indicator B VCR Indicator C T imer Indicator D Standby/Record Indicator* * Standby/R ecord Indicator lights w hen the reco rder is in standb y mode or during recording.
June 24, 2002 4:42 pm P age 4 —4— Master P a ge: Right On-screen display If you press ( OK ) on the remote control, you can see the current recorder status on the sc reen. T he indications except the clock or time counter disappears in about 5 seconds.
June 24, 2002 4:13 pm P age 5 —5— Master P a ge: Right A Check contents Make sure the package contains all of the accessories listed in “Specifications” ( 墌 16). B Situate recorder Place the recorder on a stable, horizontal surface. C Connect recorder to TV RF Connection A Disconnect the TV aerial cable from the TV .
June 24, 2002 11:44 am P age 6 — 6 — Master P a ge: Right Video Channel Set V ideo channel (RF output channel) is the c hannel on whic h your TV receiv es picture and sound signals from the recorder through the RF cable. If y ou hav e connected the r ecorder to y our TV via the RF connection, set the correct video channel.
June 24, 2002 11:44 am P age 7 — 7 — Master P a ge: Right Clock Set A Access Main Menu screen, then Clock Set screen Press MENU . Press w e to select the icon “ TIME D A TE ” , then press OK . B Set time, date and year Press rt until the desired setting appears, then press e .
June 26, 2002 5:59 pm P age 8 —8— Master P a ge: Right Manual Channel Set Store channels that were not stored during A uto Channel Set. A Access Main Menu screen, then Manual Channel Set screen Press MENU . Press w e to select the icon “PR SET”, then press OK .
June 28, 2002 2:52 pm P age 9 —9— Master P a ge: Right Changing station name (B) A Access Main Menu screen, then Manual Channel Set screen Press MENU . Press w e to select the icon “PR SET”, then press OK . ● T he Manual Channel Set screen of the channel position currently receiv ed appears.
July 26, 2002 3:18 pm P age 10 —1 0— Master P a ge: Right Basic Playback A Load a cassette Make sure the window side is up, the rear label side is facing you and the arro w on the front of the cassette is pointing tow ards the recorder . ● Do not apply too much pressure when inserting.
July 1, 2002 2:28 pm P age 11 —1 1— Master P a ge: Right Accidental er asure prev ention T o prevent accidental r ecording on a recorded cassette, remove its record safety tab. T o record on it later , cover the hole with adhesive tape. Basic Recording A Load a cassette Make sure the record safety tab is intact.
June 28, 2002 2:54 pm P age 12 —1 2— Master P a ge: Right Up to 7 timer recording programmes within a month can be made. Before starting: ● Set the clock properly . ( 墌 7) ● Set “SYSTEM” to the appropriate mode. ( 墌 15) ● Load a cassette with the record safety tab intact.
June 24, 2002 11:44 am P age 13 — 13 — Master P a ge: Right Intelligent LP Re cording When you set the tape speed to “ IP ” , the recorder automatically switc hes to LP mode to allow complete recording if there is not enough tape to record the entire programme while timer - recording in SP mode.
June 24, 2002 4:13 pm P age 14 —1 4— Master P a ge: Right Editing with another video recorder or a camcorder Y ou can use your recorder as the source pla yer or the recording deck. Y ou can use a camcorder as the source pla yer and your recorder as the recording deck.
July 1, 2002 2:30 pm P age 15 —1 5— Master P a ge: Right Connecting/Using a stereo system (HR-J695EA only) Y ou can listen to the soundtrack through y our stereo system. Connect the A UDIO OUT L and R connectors on the recorder to the AU X IN or T APE MONITOR connectors on y our stereo system’ s receiv er or amplifier .
July 1, 2002 2:30 pm P age 16 —1 6— Master P a ge: Right Specifications shown are for SP mode unless specified otherwise. E. & O.E. Design and specifications subject to change without notice. Specifications GENERAL P ower : 110 V – 240 V d , 50 Hz/60 Hz P ower consumption P ower on : Approx.
An important point after buying a device JVC HR-J695EA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC HR-J695EA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC HR-J695EA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC HR-J695EA you will learn all the available features of the product, as well as information on its operation. The information that you get JVC HR-J695EA will certainly help you make a decision on the purchase.
If you already are a holder of JVC HR-J695EA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC HR-J695EA.
However, one of the most important roles played by the user manual is to help in solving problems with JVC HR-J695EA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC HR-J695EA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
