Instruction/ maintenance manual of the product HR-J443U JVC
Go to page of 48
The VCR illustrations appearing in this instruction manual are of the HR-J643U. H R-J643U (Hi-Fi) HR-J443U (Monaural) VIDEO CASSETTE RECORDER INSTRUCTIONS LPT0002-001A For Customer Use: Enter below the Serial No. which is located on the rear of cabinet.
2 EN Dear Customer , Thank you for purchasing the JVC VHS video cassette recorder . Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new VCR. CAUTIONS W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
EN 3 IMPOR T ANT PRODUCT SAFETY INSTRUCTIONS Electrical ener gy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety .
4 EN SERVICING 1. Servicing If your product is not operating correctly or exhibits a marked change in performance and you are unable to restore normal operation by following the detailed procedure in its operating instructions, do not attempt to service it yourself as opening or removing covers may expose you to dangerous voltage or other hazards.
EN 5 CONTENTS T IMER RECORDING 28 On-Screen Timer Programming ........... 28 Check And Cancel Programs ................................... 30 Auto T imer ...................................................... 31 Instant Timer Recording (ITR) .........
6 EN Basic Connections CHECK CONTENTS 1 Make sure the package contains all of the accessories listed in “SPECIFICA TIONS” ( Z pg. 45). SITUA TE VCR 2 Place the VCR on a stable, horizontal surface. CONNECT VCR TO TV 3 The connection method you use depends on the type of TV you have.
EN 7 INITIAL SETTINGS Plug & Play The Plug & Play function sets the clock and tuner channels automatically when power is first connected to the VCR.
8 EN INITIAL SETTINGS (cont.) Language This VCR offers you the choice to view on-screen messages in English, Spanish or French (not including messages superimposed on the TV picture). Select the desired language using this procedure. The default setting is "ENGLISH".
EN 9 Clock Perform clock setting only if the clock has not been set correctly by the Plug & Play function. Access the Override Auto Clock Set screen to choose the Auto, Semi-Auto or Manual clock setting procedure. Each procedure starts from step 5.
10 EN INITIAL SETTINGS (cont.) SELECT MODE 5 At the Override Auto Clock Set screen, move the highlight bar (arrow) to “SEMI-AUT O CLOCK SET” by pressing CH ▲▼ or SHUTTLE PLUS % fi , then press OK .
EN 11 SELECT MODE 5 At the Override Auto Clock Set screen ( Z pg. 10), move the highlight bar (arrow) to “MANUAL CLOCK SET” by pressing CH ▲▼ or SHUTTLE PLUS % fi , then press OK . SET DA TE, TIME AND D.S.T . 6 The Manual Clock Set screen is displayed and the month digit begins blinking.
12 EN T uner Set Receivable Channels TURN ON THE VCR 1 Press POWER . ACCESS MAIN MENU SCREEN 2 Press MENU . ACCESS TUNER SET SCREEN 3 Move the highlight bar (arrow) to "TUNER SET" by pressing CH 5 ∞ or SHUTTLE PLUS % fi , then press OK .
EN 13 3 ¶ 4¢ 78 1 ¡ 1 2 3 456 7 8 0 9 2 2 q5 / 8 6 OK MENU MENU OK CH CH SHUTTLE PLUS The VCR detects the band (TV or CA TV) and selects the correct band automatically during Auto Channel Set. If necessary , you can check the setting at the Band screen.
14 EN Add Or Delete A Channel ACCESS TUNER SET SCREEN 1 Access by performing steps 2 and 3 of the T uner procedure on page 12. ● T o add a channel, go to step 2 . ● T o delete a channel, skip to step 4 . ACCESS AFC SCREEN 2 Move the highlight bar (arrow) to "AFC" by pressing CH 5 ∞ or SHUTTLE PLUS % fi , then press OK .
EN 15 SIMPLE PLA YBACK AND RECORDING Simple Playback LOAD A CASSETTE 1 Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the VCR. Don’ t apply too much pressure when inserting.
16 EN Simple Recording LOAD A CASSETTE 1 Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette. SELECT RECORDING CHANNEL 2 Press CH 5 ∞ . Or press the appropriate NUMBER keys, then press ENTER .
EN 17 Playback Features PLA YBACK AND RECORDING FEA TURES Still Picture/Frame-By- Frame Playback P AUSE DURING PLA YBACK 1 Press P AUSE . If there is vertical jitter , use the CH 5 or ∞ button to correct the picture. ACTIV A TE FRAME-BY - FRAME PLA YBACK 2 Press P AUSE repeatedly to advance one frame at a time.
18 EN Manual T racking Once playback begins, the VCR’ s automatic tracking function is engaged. If noise appears in the picture, you can override this and make the adjustment manually .
EN 19 Video Stabilizer Y ou can correct vertical vibration when playing back unstable EP recordings that were made on another VCR. When this function is set to "ON", vertical vibration will be automatically corrected. *The default setting is "OFF".
20 EN PLA YBACK AND RECORDING FEA TURES (cont.) Superimpose This function, switchable between ON and OFF , determines whether or not operational indicators will appear on screen.
EN 21 Select The Soundtrack (HR-J643U Only) Y our VCR can record two soundtracks simultaneously (Normal and Hi-Fi) and play back the selected one, or both together . 3 ¶ 4¢ 78 1 ¡ 1 2 3 456 7 8 0 9 2 2 q5 / 8 6 OK MENU MENU OK CH CH ACCESS MAIN MENU SCREEN 1 Press MENU during playback or when VCR is in stop mode.
22 EN PLA YBACK AND RECORDING FEA TURES (cont.) 3 ¶ 4¢ 78 1 ¡ 1 2 3 456 7 8 0 9 2 2 q5 / 8 6 FF REW PLAY REVIEW SKIP SEARCH Index Search Index codes are placed on the tape at the start of each recording. Y ou can find and automatically play back from the start of any recording using the Index Search function.
EN 23 3 ¶ 4¢ 78 1 ¡ 1 2 3 456 7 8 0 9 2 2 q5 / 8 6 FF REW FF PLAY POWER PLAY REW PAUSE STOP POWER DISPLAY C. MEMORY Repeat Playback ST AR T REPEA T 1 Press and hold PLA Y (until "PLA Y" blinks on the front display panel) during playback, then release.
24 EN PLA YBACK AND RECORDING FEA TURES (cont.) Active V ideo Calibration Active V ideo Calibration checks the condition of the tape during recording and playback, and compensates for poor reproduction to provide the best quality recording and playback pictures.
EN 25 Recording Perform steps 1 – 3 on page 16 ("Simple Recording") before continuing. A TTENTION: n As calibration takes place before recording actually starts, there is a delay of about 7 seconds after REC and PLA Y on the remote, or REC on the VCR's front panel, are pressed.
26 EN PLA YBACK AND RECORDING FEA TURES (cont.) Record One Pr ogram While W atching Another ENGAGE TV MODE 1 During recording... ● Press TV/VCR . The VCR's VCR indicator goes out. (If you are using the RF connection ( Z pg. 6) to view the output from your VCR, the TV broadcast being recorded disappears.
EN 27 Stereo And SAP (Second Audio Pr ogram) (HR-J643U Only) Y our VCR’ s built-in MTS decoder enables reception of Multi- channel TV Sound broadcasts. ● The ST indicator on the front display panel lights during stereo broadcast reception, and SAP lights during SAP program reception.
28 EN TIMER RECORDING Y ou can directly program the VCR’ s timer to record up to 8 shows, as far as a year in advance. Remember , the clock must be set before you can program the timer ( Z pg. 7 or 9). On-Screen Timer Pr ogramming LOAD A CASSETTE 1 Make sure the record safety tab is intact.
EN 29 MAKE CORRECTIONS 6 T o change any of the settings, press OK or SHUTTLE PLUS until the item you want to change begins blinking. Then set as in step 5 . RETURN TO NORMAL SCREEN 7 Press MENU as many times as necessary . ● Press just once to access the Auto T imer screen ( Z pg.
30 EN 3 ¶ 4¢ 78 1 ¡ 1 2 3 456 7 8 0 9 2 2 q5 / 8 6 OK MENU MENU OK CH CH POWER POWER TIMER CANCEL TIMER RECORDING (cont.) DISENGAGE TIMER 1 Press TIMER , then press POWER .
EN 31 3 ¶ 4¢ 78 1 ¡ 1 2 3 456 7 8 0 9 2 2 q5 / 8 6 OK MENU MENU OK CH CH TIMER ACCESS MAIN MENU SCREEN 1 Press MENU . ACCESS FUNCTION SET SCREEN 2 Move the highlight bar (arrow) to "FUNCTION SET" by pressing CH 5 ∞ or SHUTTLE PLUS % fi , then press OK .
32 EN 2 2 q5 / 8 6 REC Instant Timer Recording (ITR) This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the VCR off after recording is finished. ST AR T RECORDING 1 Press REC on the front panel.
EN 33 VIDEO IN AUDIO IN Recorder Player Y our VCR VIDEO OUT AUDIO OUT Edit T o Another VCR Y ou can use your VCR as the player and another VCR as the recorder . EDITING MAKE CONNECTIONS 1 Connect an AV cable between your VCR's VIDEO OUT and AUDIO OUT connectors and another VCR’ s VIDEO IN and AUDIO IN connectors.
34 EN 2 2 q5 / 8 6 EDITING (cont.) Edit Fr om A Camcorder Or Another VCR Y ou can use a camcorder or another VCR as the player and your VCR as the recorder . MAKE CONNECTIONS 1 Connect an A V cable between the camcorder ’ s or t he playback VCR's VIDEO OUT and AUDIO OUT connectors and your VCR’ s VIDEO IN and AUDIO IN connectors.
EN 35 3 ¶ 4¢ 78 1 ¡ 1 2 3 456 7 8 0 9 CH POWER TV/VCR MBR SET STOP SPECIAL FEA TURES TV Multi-Brand Remote Contr ol The VCR's remote control can control several functions on JVC remote control TVs and on the brands of remote control TVs listed below .
36 EN SPECIAL FEA TURES (cont.) Cable Box Multi-Brand Remote Control The VCR's remote control can control functions on the brands of cable boxes listed below . Some cable box brands have more than one code. If your cable box does not function with a specified code, try other codes.
EN 37 3 ¶ 4¢ 78 1 ¡ 1 2 3 456 7 8 0 9 POWER TIMER A/B NUMBER "1" NUMBER "2" UNPLUG VCR'S POWER CORD 1 Unplug from the AC outlet. SET REMOTE CONTROL CODE 2 While holding down A/B on the remote control, press the NUMBER key "2" and then press STOP .
38 EN TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your VCR off for repair . POWER POSSIBLE CAUSE ● The power cord is disconnected.
EN 39 POSSIBLE CAUSE ● The clock and/or the timer have been set incorrectly . ● The timer is not engaged. ● The VCR has not been set up properly . ● T imer recording is in progress. ● The timer is engaged but there’s no cassette loaded. ● The loaded cassette has had its record safety tab removed.
40 EN QUESTIONS AND ANSWERS PLA YBACK Q. What happens if the end of the tape is reached during playback or search? A. The tape is automatically rewound to the beginning. Q. Can the VCR indefinitely remain in the still mode? A. No. It stops automatically after 5 minutes to protect the heads.
EN 41 INDEX List Of T erms This guide serves as a quick way to locate frequently used terms and on-screen display names. A A/B Code .................................................................... 37 Active V ideo Calibration .....................
42 EN INDEX (cont.) FRONT VIEW 1 Power On/Off Button ( Z pg. 8) 2 Cassette Loading Slot 3 Rewind [REW] Button ( Z pg. 15) 4 PLA Y Button ( Z pg. 15) 5 Fast-Forward [FF] Button ( Z pg. 15) 6 VIDEO/AUDIO Input Connectors ( Z pg. 34) * The HR-J443U has only one AUDIO input connector .
EN 43 REAR VIEW FRONT DISPLA Y P ANEL ANT. IN RF OUT CH3 CH4 OUT R L AUDIO VIDEO 1 2 4 5 3 1 VCR Mode Indicator ( Z pg. 26) 2 T ape Speed Indicators ( Z pg. 16) 3 AM/PM Indicators ( Z pg. 7) 4 Clock Display ( Z pg. 7) 5 Child Lock Indicator ( Z pg. 37) 6 Multi-Channel TV Sound Indicators ( Z pg.
44 EN REMOTE CONTROL INDEX (cont.) 1 CABLE/DBS Button ( Z pg. 36) 2 TV Button ( Z pg. 35) 3 TV/VCR Button ( Z pg. 26) 4 MBR SET Button ( Z pg. 35) 5 DISPLA Y Button ( Z pg. 23) 6 ENTER Button ( Z pg. 16) On-Screen Display [OSD] Button ( Z pg. 20) 7 TIMER Button ( Z pg.
EN 45 GENERAL Power requirement : AC 120 V ` , 60 Hz Power consumption : 21 W (HR-J643U) : 19 W (HR-J443U) T emperature Operating : 5°C to 40°C (41°F to 104°F) Storage : –20°C to 60°C (–4°F.
46 EN HOW TO LOCA TE YOUR JVC SERVICE CENTER TOLL FREE: 1-800-252-5722 JVC SER VICE & ENGINEERING COMP ANY OF AMERICA DIVISION OF US JVC CORP . F ACTORY SERVICE CENTER LOCA TIONS If you ship the product.
EN 47 LIMITED WARRANTY CONSUMER VIDEO 1-90 JVC COMP ANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONL Y TO THE ORIGINAL PURCHASER A T RET AIL to be FREE FROM DEFECTIVE MA TERIALS AND WORKMANSHIP from the date of original retail purchase for the period as shown below .
HR-J643U/443U COPYRIGHT © 1997 VICTOR COMPANY OF JAPAN, LTD. U/U(C) Printed in Malaysia 1296HOV * UN * PJ JV C COMP ANY OF AMERIC A DIVISION OF US JVC CORP .
An important point after buying a device JVC HR-J443U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC HR-J443U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC HR-J443U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC HR-J443U you will learn all the available features of the product, as well as information on its operation. The information that you get JVC HR-J443U will certainly help you make a decision on the purchase.
If you already are a holder of JVC HR-J443U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC HR-J443U.
However, one of the most important roles played by the user manual is to help in solving problems with JVC HR-J443U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC HR-J443U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
