Instruction/ maintenance manual of the product HR-J271MS JVC
Go to page of 46
EN CONTENTS ENGLISH SAFETY FIRST 2 Safety Precautions ...................... 2 INST ALLING YOUR NEW RECORDER 3 Basic Connections ..................... 3 INITIAL SETTINGS 4 V ideo Channel Set ..................... 4 Auto Set Up ........................
2 EN SAFETY FIRST IMPORT ANT n Please read the various precautions on this page before installing or operating the recorder . n It should be noted that it may be unlawful to re-record pre-recorded tap.
EN 3 Basic Connections CHECK CONTENTS 1 Make sure the package contains all of the accessories listed in "Specifications" ( Z pg. 43). SITUA TE RECORDER 2 Place the recorder on a stable, horizontal surface. CONNECT RECORDER TO TV 3 The connection method you use depends on the type of TV you have.
4 EN V ideo Channel Set INITIAL SETTINGS V ideo Channel (RF Output Channel) is the channel on which your TV receives picture and sound signals from the video recorder through the RF cable. If you have connected the video recorder to your TV via the provided RF cable only (RF connection) – Go to "With RF Connection" below .
EN 5 (Ex.) If channel 50 is available in your area SET VIDEO CHANNEL 3 Set your TV to UHF channel 34. ● If the two vertical white bars appear clearly on the screen as shown in the illustration ( Z "TEST SIGNAL" on page 4), press OK and then go to step 4 .
6 EN 123 456 7 89 0 1 2 4 3 INITIAL SETTINGS (cont.) Auto Set Up Before starting, make sure of the following: ● T he TV aerial cable should be connected to the recorder . ● The recorder's mains power cord should be connected to a mains outlet.
EN 7 7 89 0 1 4 3 AUTO CH SET PLEASE WAIT ST ART FINISH TV Screen When Auto Set Up is completed, the lowest position number will appear on the front display panel. During Auto Set Up "PLEASE W AIT" blinks on the screen and "Auto" blinks on the front display panel.
8 EN q6 PR. 12 ] SP 23 : 59 NTSC 3.58 31. 12. 95 –9 : 59 : 59 0 ++ + + INITIAL SETTINGS (cont.) On-Screen Displays Y ou can choose w hether or not to have various oper ational indicators appear on screen, by setting this function ON or OFF . T urn on the TV and select the VIDEO channel (or A V mode).
EN 9 Select Language T urn on the TV and select the VIDEO channel (or A V mode). MAIN MENU FUNCTION SET TUNER SET INITIAL SET [ 5 / ∞ ] = [MENU] : EXIT fi fi fi TURN ON THE RECORDER 1 Press .
10 EN Clock Set T urn on the TV and select the VIDEO channel (or A V mode). TURN THE RECORDER ON 1 Press . ACCESS MAIN MENU SCREEN 2 Press MENU . ACCESS INITIAL SET SCREEN 3 Press PUSH JOG %fi to place the pointer next to "INITIAL SET", then press OK or PUSH JOG .
EN 11 123 456 7 89 0 1 2 4 3 PLA YB A CK Basic Playback The easiest, most basic operation possible with your video recorder is tape pla yback. Already-recorded signals on a video tape are read by your video recorder and displayed on your TV just like a TV programme.
12 EN 123 456 7 89 0 1 2 4 3 Playback Features V ariable-Speed Search ACTIV A TE V ARIABLE-SPEED SEARCH 1 During pla yback, press PUSH JOG or . ● T he more times you press, the faster the playbac k picture moves. ● T o decrease speed, press the button for the opposite direction.
EN 13 123 456 7 89 0 1 2 4 3 REVIEW FF PAUSE STOP PLAY REW Manual T racking Y our video recorder is equipped with automatic trac king control. During playback, you can override this and adjust the tracking manually by pressing the PR + / – buttons. OVERRIDE AUTOMA TIC TRACKING 1 Press PR + and – on the recorder to engage manual tracking.
14 EN Index Search Y our recorder automatically marks index codes at the beginning of each recording. T his function gives you quick access to an y one of 9 index codes in either direction. NOTE: Before starting, make sure the recorder is in the Stop mode.
EN 15 Next Function Memor y T he Next Function Memory "tells" the recorder what to do after rewinding. Before continuing, ensure that the recorder is in the Stop mode. a– F or A utomatic Start Of Playback After T ape Rewind... ...press REW , then press PLA Y within 2 seconds.
16 EN 123 456 7 89 0 1 2 4 3 TV signals being received b y the recorder's built-in tuner can be recorded onto a video tape. Y ou can "capture" a TV programme using your video recorder . RECORDING Basic Recording LOAD A CASSETTE 1 Insert a cassette with the record safety tab intact.
EN 17 123 456 7 89 0 1 2 4 3 Recording Features Record One Pr ogramme While W atching Another SELECT CHANNEL TO W A TCH 1 Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view .
18 EN RECORDING (cont.) 123 456 7 89 0 1 2 4 3 B.E.S.T . Picture System T urn on the TV and select the VIDEO channel (or A V mode). T he B.E.S.T . (Biconditional Equalised Signal T racking) system checks the condition of the tape in use during recording and playbac k, and compensates to provide the highest-possible recording and playbac k pictures.
EN 19 Recording ST ART RECORDING 1 Press and hold RECORD and press PLA Y on the remote, or press RECORD on the recorder . DURING B.E.S.T . B.E.S.T . COMPLETE ● The recorder spends approximately 7 seconds assessing the condition of the tape, then begins recording.
20 EN 123 456 7 89 0 1 2 4 3 Express Timer Pr ogramming Remember , the clock must be set before y ou can programme the timer ( Z pg. 10). Before performing the following steps: ● Insert a cassette with the safety tab in place. The recorder will come on automatically .
EN 21 123 456 7 89 0 1 2 4 3 SET T APE SPEED 6 Press SP/LP/EP ( ) to set the tape speed. RETURN TO NORMAL SCREEN 7 After confirming all information is correct, press PROG or OK . "PROGRAM COMPLETED" appears on the screen for about 5 seconds, then normal screen appears.
22 EN TIMER RECORDING (cont.) Check, Cancel And Replace Pr ogrammes DISENGAGE TIMER MODE 1 Press ‰ ‰ ‰ ‰ ‰ , then press . ACCESS PROGRAMME CHECK SCREEN 2 Press ‰ ‰ ‰ ‰ ‰ ? . ACCESS PROGRAMME SCREEN 3 Press ‰ ‰ ‰ ‰ ‰ ? again to check more information.
EN 23 When programmes overlap each other If “PROGRAM OVERLAPPED” appears, you have another programme overlapping the programme you have just made. The Programme Check screen appears and conflicting programmes will start blinking. Example: Programme 1 (you have just made) and Programme 4 ov erlap each other .
24 EN Auto Timer When the Auto T imer is set to ON the timer is automatically engaged when the recorder power is turned off and automati- cally disengaged when the recorder is powered back on.
EN 25 7 89 0 1 4 3 Automatic Sat- ellite Pr ogram Recording SP/LP/EP This facility allows you to automatically record a satellite program whic h is timer -programmed on your external satellite receiver .
26 EN Remote A/B Code Switching T he remote control is capable of controlling two JVC video recorders independently; one set to respond to the remote control's A code control signals and another set to respond to B code control signals.
EN 27 Contr ol Y our TV Using Additional Buttons Use the NUMBER keys, and the button, button or ‰ ‰ ‰ ‰ ‰ button to select the TV's channel.
28 EN SET BRAND CODE 1 Refer to the chart below . While holding down CABLE/ SA T/DVD on the recorder's remote control, enter one of the brand code corresponding to the make of your unit using the NUMBER keys, then press OK . Check if the unit's power goes off as it should.
EN 29 CABLE BOX BRAND NAME CODE JVC 72, 73, AMSTRAD 60, 61, 62, 63, 92 BT 72 CANAL+ 81 C ANAL SA TELLITE 81 D-box 85 ECHOST AR 51, 78, 79, 80, 82 FINLUX 68 GALAXIS 69, 88 GRUNDIG 64, 65 HIRSCHMANN 64 .
30 EN 123 456 7 89 0 1 2 4 EDITING Edit T o Or Fr om Another V ideo Recorder Y ou can use your video recorder as the sour ce play er or the recording deck. MAKE CONNECTIONS 1 Connect the pla yer's A UDIO/VIDEO OUT connector to the recorder's A UDIO/VIDEO IN connector .
EN 31 123 456 7 89 0 1 2 4 Y ou can use a camcorder as the source pla yer and your video recorder as the recorder . Edit Fr om A Camcorder MAKE CONNECTIONS 1 Connect the camcorder's AUDIO/VIDEO OUT connec- tors to the recorder's rear panel A UDIO/VIDEO input connectors.
32 EN INFORMA TION ON MUL TI-SYSTEM COMP A TIBILITY Setting Of The Colour System Select Buttons Use the COLOUR SYSTEM button on the front panel to select the colour system.
EN 33 Playback T his recorder can play back all 3 types of recorded tape. VIDEO OUT AUDIO OUT RF OUT NTSC 4.43 MHz NTSC PAL MESECAM PAL MESECAM NTSC [ PAL NTSC 3.
34 EN 123 456 7 89 0 1 2 4 3 T urn on the TV and select the VIDEO channel (or A V mode). TUNER SET TURN ON THE RECORDER 1 Press . ACCESS MAIN MENU SCREEN 2 Press MENU . ACCESS TUNER SET SCREEN 3 Press PUSH JOG % fi to place the pointer next to "TUNER SET", then press OK or PUSH JOG .
EN 35 Manual Channel Set Store channels that were not stored during Auto Set Up ( Z pg. 6) or Auto Channel Set ( Z pg. 34). ACCESS TUNER SET SCREEN 1 Perform steps 1 – 3 of "Auto Channel Set" on page 32. ACCESS CHANNEL LIST 2 Press PUSH JOG % fi to place the pointer next to "CH EDIT", then press OK or PUSH JOG .
36 EN TUNER SET (cont.) Delete A Channel ACCESS TUNER SET SCREEN 1 Perform steps 1 – 3 of "Auto Channel Set" on page 34. ACCESS CHANNEL LIST 2 Press PUSH JOG %fi to place the pointer next to "CH EDIT", then press OK or PUSH JOG .
EN 37 Fine-T uning Channels ACCESS TUNER SET SCREEN 1 Perform steps 1 – 3 of "Auto Channel Set" on page 32. ACCESS CHANNEL LIST 2 Press PUSH JOG %fi to place the pointer next to "CH EDIT", then press OK or PUSH JOG .
38 EN TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can sa ve you the trouble of sending y our video recorder off for repair .
EN 39 CORRECTIVE ACTION Insert a cassette, or using adhesive tape, reseal the slot where the tab was removed. Set to the desired channel. Confirm that the source is properly connected. Confirm that all units' power switc hes are turned on. Set the input mode to "L-1".
40 EN CORRECTIVE ACTION Position the camcorder so its microphone is aw ay from the TV . T urn the TV's volume down. If you need the skipped c hannels, restore them. ( Z pg. 35) Press P AUSE to pause the recording, change channels, then press PLA Y to resume recording.
EN 41 QUESTIONS AND ANSWERS PLA YBACK Q. What happens if the end of the tape is reac hed during playback or search? A. The tape is automatically rewound to the beginning. Q. Can the video recorder indefinitely remain in the still mode? A. No. It stops automatically after 5 minutes to protect the heads.
42 EN INDEX 1 Mains Power Cord Z pg. 3 2 Lithium Battery Compartment Z pg. 5 3 ANT . IN Connector Z pg. 3 FRONT VIEW 1 ST ANDBY/ON Button Z pg. 8 2 Cassette Loading Slot 3 Rewind [REW] Button Z pg. 11, 12 4 PLA Y Button Z pg. 11 5 F ast F orward [F F] Button Z pg.
EN 43 DISPLA Y P ANEL 1 B .E.S.T . Picture System Displa y Z pg. 18 2 Symbolic Mode Indicators 5 Channel Display Clock Display 6 "Cassette Loaded" Mark 7 Counter Display 8 Mode Display (L-1) STILL: SLOW : RECORD: RECORD P AUSE: PLA Y : FF/REW V ARIABLE SHUTTLE SEARCH: 3 T ape Speed Indicators Z pg.
44 EN INDEX (cont.) REMOTE CONTROL Buttons with a small dot on the left side of the name can also be used to operate your TV Z pg. 27. 1 TV Button Z pg. 27 2 VCR Button Z pg. 27 3 TV/VCR Button Z pg. 27 4 REVIEW Button Z pg. 13 5 NUMBER Keys Z pg. 16 6 VSP/PDC Button (no function) 7 Button Button Z pg.
EN 45 SPECIFIC A TIONS GENERAL Power requirement Rating : AC 110 V – 240 V ` , 50/60 Hz Operating : AC 90 V – 260 V ` , 50/60 Hz Power consumption : 14 W T emperature Operating : 5°C to 40°C Storage : –20°C to 60°C Operating position : Horizontal only Dimensions (WxHxD) : 360 mm x 94 mm x 278 mm W eight : 3.
EN COPYRIGHT © 2000 VICTOR COMPANY OF JAPAN, LTD. MS Printed in Malaysia 0600IYV * YP * PJ VICTOR COMP ANY OF JAPAN, LIMITED HR-J277MS HR-J271MS ® Registered Trademark owned by VICTOR COMPANY OF JAPAN, LTD.
An important point after buying a device JVC HR-J271MS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC HR-J271MS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC HR-J271MS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC HR-J271MS you will learn all the available features of the product, as well as information on its operation. The information that you get JVC HR-J271MS will certainly help you make a decision on the purchase.
If you already are a holder of JVC HR-J271MS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC HR-J271MS.
However, one of the most important roles played by the user manual is to help in solving problems with JVC HR-J271MS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC HR-J271MS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
