Instruction/ maintenance manual of the product HR-J268EU JVC
Go to page of 52
VIDEO CASSETTE RECORDER INSTRUCTIONS LPT0212-001A PAL H R-J468EU H R-J311EU HR-J268EU STANDBY/ON TIMER REC LINK TV PROG DISPLAY T V P R O G + T V P R O G – T V – T V + TV 0000 START DEBUT STOP FIN DATE MENU OK TV PROG TV/VCR DAILY/QTDN.
2 EN SAFETY FIRST Failure to heed the following precautions may result in damage to the recorder , remote control or video cassette. 1. DO NOT place the recorder . . . ... in an environment prone to extreme temperatures or humidity . ... in direct sunlight.
EN 3 Basic Connections CHECK CONTENTS 1 Make sure the package contains all of the accessories listed in “Specifications” ( Z pg. 51). SITUA TE RECORDER 2 Place the recorder on a stable, horizontal surface. CONNECT RECORDER TO TV 3 The connection method you use depends on the type of TV you have.
4 EN INITIAL SETTINGS When the button on the recorder/remote control is pressed for the first time to power on the recorder after you plug the mains power cord into a mains outlet, the Country Set display will appear on the TV screen and the recorder's front display panel.
EN 5 CONFIRM/SET VIDEO CHANNEL 5 If you have connected the video recorder to your TV via an RF cable only (RF connection) The channel that is shown on the display panel is your V ideo Channel. T o view picture signals from the video recorder , set your TV to the V ideo Channel.
6 EN INITIAL SETTINGS (cont.) Preset Download 123 456 7 89 0 2 4 1 3 ? OK When you connect the recorder and your TV via fully-wired 21-pin SCAR T cable ( Z pg. 3), you can set the recorder's tuner channels by downloading preset data from your TV instead of using the Auto Set Up function ( Z pg.
EN 7 If both auto channel set and auto clock set have been performed successfully: 1 T urn on the TV and select its VIDEO channel or A V mode, then make sure that all necessary stations have been stored in the recorder's memory by using the TV PROG button(s).
8 EN INITIAL SETTINGS (cont.) 123 456 7 89 0 2 4 1 3 ? Language This recorder offers you the choice to view on-screen messages in 13 different languages. Though Auto Set Up selects the language automatically ( Z pg. 7), you can change the language setting manually using this procedure as required.
EN 9 On-Screen Displays Y ou can choose whether or not to have various operational indicators appear on screen, by setting this function ON or OFF . Messages appear in the selected language ( Z pg. 7 or 8). T urn on the TV and select the VIDEO channel (or A V mode).
10 EN Power Save Mode T urn on the TV and select the VIDEO channel (or A V mode). Y ou can reduce the power consumption while the recorder is turned off. TURN ON THE RECORDER 1 Press . ACCESS MAIN MENU SCREEN 2 Press MENU . ACCESS MODE SET SCREEN 3 Press %fi to move the highlight bar (pointer) to "MODE SET", then press OK or # .
EN 11 T -V LINK T -V Link Functions TURN ON THE RECORDER 1 Press . ACCESS MAIN MENU SCREEN 2 Press MENU . ACCESS MODE SET SCREEN 3 Press %fi to move the highlight bar (pointer) to "MODE SET", then press OK or # .
12 EN Colour System Set INFORMA TION ON COLOUR SYSTEM TURN ON THE RECORDER 1 Press . ACCESS MAIN MENU SCREEN 2 Press MENU . ACCESS MODE SET SCREEN 3 Press %fi to move the highlight bar (pointer) to "MODE SET", then press OK or # .
EN 13 PLA YBACK Basic Playback The easiest, most basic operation possible with your video recorder is tape playback. Already-recorded signals on a video tape are read by your video recorder and displayed on your TV just like a TV programme.
14 EN V ariable-Speed Search ACTIV A TE V ARIABLE-SPEED SEARCH 1 During playback, press @ or # ( ™ or £ ). ● The more times you press, the faster the playback picture moves. ● T o decrease speed, press the button for the opposite direction. T o resume normal playback, press PLA Y .
EN 15 Instant ReV iew Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last timer -recorded programme. If you have several programmes recorded, you can easily access any of them. NOTE: Before starting, make sure that the recorder is off and that the T imer mode is disengaged.
16 EN Repeat Playback Y our video recorder can automatically play back the whole tape 50 times repeatedly . ST AR T PLA YBACK 1 Press PLA Y . ACTIV A TE REPEA T PLA YBACK 2 Press PLA Y and hold for over 5 seconds, then release. ● The Play indicator ( ) on the display panel blinks slowly .
EN 17 TV signals being received by the recorder ’ s built-in tuner can be recorded onto a video tape. Y ou can “capture” a TV programme using your video recorder . RECORDING Basic Recording 123 456 7 89 0 2 4 1 3 ? PAUSE STOP PLAY T urn on the TV and select the VIDEO channel (or A V mode).
18 EN RECORDING (cont.) Recording Features Record One Pr ogramme While W atching Another If your recorder is connected to the TV via A V connection, . . . . . . press TV/VCR . The recorder's VCR indicator and the TV broadcast being recorded disappear .
EN 19 Instant Timer Recording (ITR) This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the recorder off after recording is finished. ST AR T RECORDING 1 Press RECORD on the recorder . ENGAGE ITR MODE 2 Press RECORD again.
20 EN 123 456 7 89 0 2 4 1 3 ? B.E.S.T . Picture System The B.E.S.T . (Biconditional Equalised Signal T racking) system checks the condition of the tape in use during recording and playback, and compensates to provide the highest-possible recording and playback pictures.
EN 21 Recording ST AR T RECORDING 1 Press and hold RECORD and press PLA Y on the remote, or press RECORD on the recorder . DURING B.E.S.T . B.E.S.T . COMPLETE ● The recorder spends approximately 7 seconds assessing the condition of the tape, then begins recording.
22 EN ACCESS SHOWVIEW SCREEN 1 Press PROG . The front display panel looks like this: ENTER SHOWVIEW NUMBER 2 Press the NUMBER keys to enter the S HOW V IEW number of a programme you wish to record. ● If you make a mistake, press and input the correct number .
EN 23 123 456 7 89 0 2 4 1 3 ? SET T APE SPEED (HR-J468EU ONL Y) 4 Press SP/LP ( ) to set the tape speed. SET VPS/PDC MODE 5 Press VPS/PDC to select "ON" or "OFF". If "VPS/PDC ON" is displayed on the screen or "VPS/ PDC" is lit on the display panel, VPS/PDC is set to ON.
24 EN Express Timer Pr ogramming TIMER RECORDING (cont.) If you don’t know the S HOW V IEW number for the programme you wish to record, use the following procedure to set your recorder to timer -record the programme. ACCESS SHOWVIEW SCREEN 1 Press PROG .
EN 25 ENTER CHANNEL POSITION 6 Press TV PROG +/– . SET T APE SPEED (HR-J468EU ONL Y) 7 Press SP/LP ( ) to set the tape speed. SET VPS/PDC MODE 8 Press VPS/PDC to select "ON" or "OFF". If "VPS/PDC ON" is displayed on the screen or "VPS/ PDC" is lit on the display panel, VPS/PDC is set to ON.
26 EN Check, Cancel And Replace Pr ogrammes DISENGAGE TIMER MODE 1 Press ‰ ( TIMER ), then press . ACCESS PROGRAM CHECK SCREEN/DISPLA Y 2 Press . ACCESS PROGRAM SCREEN/ DISPLA Y 3 Press again to check more information. Each time you press , the next programme's information appears.
EN 27 Auto Timer When the Auto T imer is set to ON the timer is automatically engaged when the recorder power is turned off and automati- cally disengaged when the recorder is powered back on. ACCESS MAIN MENU SCREEN 1 Press MENU . ACCESS MODE SET SCREEN 2 Press %fi to move the highlight bar (pointer) to "MODE SET", then press OK or # .
28 EN This facility allows you record automatically a satellite programme which is timer -programmed on your external satellite tuner . Connect a satellite tuner to the recorder's A V2 IN/DECODER connector ( Z pg.
EN 29 ENTREE ANT. IN ENTREE/DECODEUR IN/DECODER AV2 ENTREE/SORTIE IN/OUT SORTIE RF OUT ANTENNE AV1 123 456 7 89 0 2 4 1 3 ? Edit Fr om A Camcorder EDITING NUMBER "0" TV PROG Y ou can use a camcorder as the source player and your video recorder as the recorder .
30 EN Edit T o Or Fr om Another V ideo Recorder Y ou can use your video recorder as the sour ce player or the recording deck. MAKE CONNECTIONS 1 Connect the player ’ s 21-pin SCART (A V) connector to the recorder’s 21-pin SCAR T (A V) connector as illustrated on page 31.
EN 31 ENTREE ANT. IN ENTREE/DECODEUR IN/DECODER AV2 ENTREE/SORTIE IN/OUT SORTIE RF OUT ANTENNE AV1 ENTREE ANT. IN ENTREE/DECODEUR IN/DECODER AV2 ENTREE/SORTIE IN/OUT SORTIE RF OUT ANTENNE AV1 Another .
32 EN ENTREE ANT. IN ENTREE/DECODEUR IN/DECODER AV2 ENTREE/SORTIE IN/OUT SORTIE RF OUT ANTENNE AV1 DECODER VCR TV Connection T o A Satellite T uner If you don't have a decoder .
EN 33 ENTREE ANT. IN ENTREE/DECODEUR IN/DECODER AV2 ENTREE/SORTIE IN/OUT SORTIE RF OUT ANTENNE AV1 DECODER VCR TV EXT.2 EXT.1 If you have a decoder . . . Connect the decoder to the satellite tuner's connector , A V1 IN/ OUT connector to TV's connector , and A V2 IN/DECORDER connector to the satellite tuner's connector .
34 EN The A V2 IN/DECODER connector can be used as an input terminal for an external decoder (descrambler). Simply connect a decoder and you can enjoy the variety of programming that is available through scrambled channels. SELECT INPUT MODE 1 Set "A V2 SELECT " to "DECODER".
EN 35 S HOW V IEW Setup IMPORT ANT Normally , Auto Set Up ( Z pg. 4), Preset Download ( Z pg. 6) or Auto Channel Set ( Z pg. 36) sets the Guide Program Numbers automatically . Y ou need to set the Guide Program Numbers manually only in the following cases.
36 EN 123 456 7 89 0 2 4 1 3 ? SUBSIDIARY SETTINGS (cont.) T uner Set IMPORT ANT Perform the following steps only if — — Auto Channel Set has not been set correctly by Auto Set Up function or by Preset Download ( Z pg. 4, 6). — you have moved to a different area or if a new station starts broadcasting in your area.
EN 37 PERFORM AUTO CHANNEL SET 6 Press OK twice. ● Y ou can set up the recorder's tuner also by Preset Download ( Z pg. 6) ● The Auto Set screen appears, and remains on screen while the recorder searches for receivable stations. As Auto Channel Set progresses, the " " mark on the screen moves from left to right.
38 EN 123 456 7 89 0 2 4 1 3 ? SUBSIDIARY SETTINGS (cont.) A TTENTION Guide Program numbers are not set when channels are stored manually . If an attempt is made at timer program- ming with S HOW V IEW in this state, the “GUIDE PROG SET” screen appears; set the Guide Program numbers on this screen.
EN 39 Perform steps 1 and 2 of "Storing Channels Manually" on page 38 to access the C onfirmation screen before continuing. Change Station Channel Position SELECT ITEM 1 Press % fi @ # until the item you want to move begins blinking. Then press OK and the station name (ID) and its channel (CH) number begin blinking.
40 EN SUBSIDIARY SETTINGS (cont.) SELECT ST A TION NAME CHARACTER 1 Press # until the first letter of the station name begins blinking. ENTER NEW CHARACTER 2 Press %fi to cycle through the characters (A–Z, 0–9, –, * , +, (space) ) and stop when the desired character is indicated, then press # to enter .
EN 41 TV Station And ID List ID* ST A TION NAME 1000 TV1000 3SA T 3SA T ADL T ADUL T ANT3 ANTENA3 ARD ARD AR TE AR TE BBC BBC GROUP BBC1 BBC1 BBC2 BBC2 BR3 BA YERN3 C+ CANAL PLUS C1 POR TUGUSES CAN5 C.
42 EN SUBSIDIARY SETTINGS (cont.) Just Clock The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal. The Just Clock option can be set "ON" or "OFF" at the Clock Set screen (the default setting is "OFF").
EN 43 NOTES: ● Just Clock (when set to "ON") adjusts the recorder's built-in clock every hour , except for 23:00, 0:00, 1:00 and 2:00. ● Just Clock is not effective when . . . – the recorder ’ s power is on. – the recorder is in the T imer mode.
44 EN V ideo Channel (RF Output Channel) is the channel on which your TV receives picture and sound signals from the video recorder through the RF cable.
EN 45 TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your video recorder off for repair . POSSIBLE CAUSE ● The mains power cord is discon- nected.
46 EN CORRECTIVE ACTION Re-perform the clock and/or timer settings. Press ‰ and confirm that “ ‰ “ is displayed on the display panel. T imer programming can’t be performed while a timer recording is in progress. W ait until it finishes. Load a cassette with the Record Safety tab intact, or cover the hole using adhesive tape.
EN 47 QUESTIONS AND ANSWERS PLA YBACK Q. What happens if the end of the tape is reached during playback or search? A. The tape is automatically rewound to the beginning. Q. Can the video recorder indefinitely remain in the still mode? A. No. It stops automatically after 5 minutes to protect the heads.
48 EN INDEX FRONT VIEW [J468/268EU] STANDBY/ON TIMER REC LINK TV PROG DISPLAY 1 2 3 0@ ! 8 7 4 5 6 % 9 $ # 1 ST ANDBY/ON Button Z pg. 4 2 Cassette Loading Slot 3 DISPLA Y Button Z pg. 18 4 Rewind [REW] Button Z pg. 13, 14 5 PLA Y Button Z pg. 13 6 Fast Forward [FF] Button Z pg.
EN 49 ENTREE ANT. IN ENTREE/DECODEUR IN/DECODER AV2 ENTREE/SORTIE IN/OUT SORTIE RF OUT ANTENNE AV1 1 5 3 4 2 4 A V1 IN/OUT Connector Z pg. 3, 29, 31, 32, 33, 34 5 RF . OUT Connector Z pg. 3 1 Mains Power Cord Z pg. 3 2 ANT . IN Connector Z pg. 3 3 A V2 IN/DECODER Connector Z pg.
50 EN REMOTE CONTROL Buttons with a small dot on the left side of the name can also be used to operate your JVC TV while holding down the TV button. Z "Operating JVC TVs" below . 1 TV Button Z "Operating JVC TVs" below 2 TV/VCR Button Z pg.
EN 51 SPECIFICA TIONS GENERAL Power requirement : AC 220 – 240 V ` , 50/60 Hz Power consumption Power on : 18 W Power off : 5 W Power save : 2.8 W T emperature Operating : 5°C to 40°C Storage : .
Auto Set Up – referring to the display panel The Auto Set Up function sets the tuner channels, clock, Guide Program numbers and video channel* automatically . BEFORE YOU ST ART PLEASE MAKE SURE THA T : n The TV aerial cable is connected to the ANT .
An important point after buying a device JVC HR-J268EU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC HR-J268EU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC HR-J268EU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC HR-J268EU you will learn all the available features of the product, as well as information on its operation. The information that you get JVC HR-J268EU will certainly help you make a decision on the purchase.
If you already are a holder of JVC HR-J268EU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC HR-J268EU.
However, one of the most important roles played by the user manual is to help in solving problems with JVC HR-J268EU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC HR-J268EU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
