Instruction/ maintenance manual of the product HR-J251MS JVC
Go to page of 38
H R-J251MS VIDEO CASSETTE RECORDER INSTRUCTIONS LPT0139-001B PAL NTSC POWER SP/LP/EP B.E.S.T. PICTURE TV PROG COLOUR SYSTEM VIDEO AUDIO REVIEW SP PROG.
2 EN SAFETY FIRST IMPORT ANT n Please read the various precautions on this page before installing or operating the recorder . n It should be noted that it may be unlawful to re-record pre-recorded tap.
EN 3 Basic Connections CHECK CONTENTS 1 Make sure the package contains all of the accessories listed in “Specifications” ( Z pg. 37). SITUA TE RECORDER 2 Place the recorder on a stable, horizontal surface. CONNECT RECORDER TO TV 3 The connection method you use depends on the type of TV you have.
4 EN V ideo Channel Set INITIAL SETTINGS V ideo Channel (RF Output Channel) is the channel on which your TV receives picture and sound signals from the video recorder through the RF cable. If you have connected the video recorder to your TV via the provided RF cable only (RF connection) – Go to "With RF Connection" below .
EN 5 (Ex.) If channel 50 is available in your area SET VIDEO CHANNEL 3 Set your TV to UHF channel 36. ● If the two vertical white bars appear clearly on the screen as shown in the illustration ( Z "TEST SIGNAL" on page 4), press OK and then go to step 4 .
6 EN 12 3 4 0 6 78 5 9 1 4 3 2 INITIAL SETTINGS (cont.) Auto Set Up Auto Channel Set Before starting, make sure of the following: ● The TV aerial cable should be connected to the recorder . ● The recorder's mains power cord should be connected to a mains outlet.
EN 7 AUTO CH SET PLEASE WAIT STAR T FINISH TV Screen When Auto Set Up is completed, the lowest position number will appear on the front display panel. During Auto Set Up "PLEASE W AIT" blinks on the screen and "Auto" blinks on the front display panel.
8 EN INITIAL SETTINGS (cont.) q6 PR. 12 ] SP 21 : 00 MESECAM 24. 12. 98 –1 : 23 : 45 On-Screen Displays Y ou can choose whether or not to have various operational indicators appear on screen, by setting this function ON or OFF . T urn on the TV and select the VIDEO channel (or AV mode).
EN 9 ACCESS LANGUAGE SELECT SCREEN 4 Press PUSH JOG %fi to place the pointer next to "LANGUAGE", then press OK or PUSH JOG . SELECT LANGUAGE 5 Place the pointer next to the language of your choice (English or Russian) by pressing PUSH JOG %fi , then press OK or PUSH JOG .
10 EN 12 3 4 0 6 78 5 9 1 4 3 2 PLA YBACK Basic Playback The easiest, most basic operation possible with your video recorder is tape playback. Already-recorded signals on a video tape are read by your video recorder and displayed on your TV just like a TV programme.
EN 11 Playback Features V ariable-Speed Search ACTIV A TE V ARIABLE-SPEED SEARCH 1 During playback, press PUSH JOG or . ● The more times you press, the faster the playback picture moves. ● T o decrease speed, press the button for the opposite direction.
12 EN 12 3 4 0 6 78 5 9 1 4 3 2 PLA YBACK (cont.) Manual T racking Y our video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the TV PROG buttons. OVERRIDE AUTOMA TIC TRACKING 1 Press (SP/LP/EP) on the remote to engage manual tracking.
EN 13 Index Search Y our recorder automatically marks index codes at the beginning of each recording. This function gives you quick access to any one of 9 index codes in either direction. NOTE: Before starting, make sure the recorder is in the Stop mode.
14 EN 12 3 4 0 6 78 5 9 1 4 3 2 TV signals being received by the recorder ’s built-in tuner can be recorded onto a video tape. Y ou can “capture” a TV programme using your video recorder . RECORDING Basic Recording T urn on the TV and select the VIDEO channel (or AV mode).
EN 15 12 3 4 0 6 78 5 9 1 4 3 2 Recording Features Record One Pr ogramme While W atching Another SELECT CHANNEL TO W A TCH 1 Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view .
16 EN 12 3 4 0 6 78 5 9 1 4 3 2 B.E.S.T . Pictur e System T urn on the TV and select the VIDEO channel (or AV mode). The B.E.S.T . (Biconditional Equalised Signal T racking) system checks the condition of the tape in use during recording and playback, and compensates to provide the highest-possible recording and playback pictures.
EN 17 Recording ST AR T RECORDING 1 Press and hold RECORD and press PLAY on the remote, or press RECORD on the recorder . DURING B.E.S.T . B.E.S.T . COMPLETE ● The recorder spends approximately 7 seconds assessing the condition of the tape, then begins recording.
18 EN 12 3 4 0 6 78 5 9 1 4 3 2 Express Timer Pr ogramming Remember , the clock must be set before you can programme the timer ( Z pg. 9). Before performing the following steps: ● Insert a cassette with the safety tab in place. The recorder will come on automatically .
EN 19 12 3 4 0 6 78 5 9 1 4 3 2 RETURN TO NORMAL SCREEN 7 After confirming all information is correct, press PROG. or OK . "PROGRAM COMPLETED" appears on the screen for about 5 seconds, then normal screen appears. ● Repeat steps 1 – 7 for each additional programme.
20 EN Check, Cancel And Replace Programmes DISENGAGE TIMER MODE 1 Press TIMER , then press . ACCESS PROGRAM CHECK SCREEN 2 Press PROG. CHECK . ACCESS PROGRAM SCREEN 3 Press PROG. CHECK again to check more informa- tion. Each time you press PROG. CHECK , the next programme's information appears.
EN 21 Auto Timer When the Auto T imer is set to ON the timer is automatically engaged when the recorder power is turned off and automati- cally disengaged when the recorder is powered back on.
22 EN EDITING Edit T o Another V ideo Recorder Y ou can use your video recorder as the source player and another video recorder as the recording deck. MAKE CONNECTIONS 1 Connect the player’s AUDIO/VIDEO OUT connectors to the recorder ’ s AUDIO/VIDEO IN connectors.
EN 23 12 3 4 0 6 78 5 9 4 3 2 Y ou can use a camcorder or another video recorder as the source player and your video recorder as the recording deck. Edit Fr om A Camcorder Or Another V ideo Recorder M.
24 EN COLOUR SYSTEM AUTO NTSC 3.58 NTSC 4.43 NTSC PAL* PAL MESECAM INFORMA TION ON MUL TI-SYSTEM COMP A TIBILITY Setting Of The Colour System Select Buttons Use the COLOUR SYSTEM button on the recorder's front panel to select the colour system. Pressing this button changes the mode as illustrated on the left.
EN 25 Playback This recorder can play back all 3 types of recorded tape. VIDEO OUT AUDIO OUT RF OUT NTSC 4.43 MHz NTSC PAL MESECAM PAL MESECAM NTSC [ PAL NTSC 3.
26 EN 12 3 4 0 6 78 5 9 1 4 3 2 T urn on the TV and select the VIDEO channel (or AV mode). TUNER SET ACCESS TUNER SET SCREEN 3 Press PUSH JOG %fi to place the pointer next to "TUNER SET", then press OK or PUSH JOG .
EN 27 Manual Channel Set Store channels that were not stored during Auto Set Up ( Z pg. 6) or Auto Channel Set ( Z pg. 26). ACCESS TUNER SET SCREEN 1 Perform steps 1 – 3 of "Auto Channel Set" on page 26. ACCESS CHANNEL LIST 2 Press PUSH JOG % fi to place the pointer next to "CH EDIT", then press OK or PUSH JOG .
28 EN TUNER SET (cont.) Delete A Channel ACCESS TUNER SET SCREEN 1 Perform steps 1 – 3 of "Auto Channel Set" on page 26. ACCESS CHANNEL LIST 2 Press PUSH JOG %fi to place the pointer next to "CH EDIT", then press OK or PUSH JOG .
EN 29 Fine-T uning Channels ACCESS TUNER SET SCREEN 1 Perform steps 1 – 3 of "Auto Channel Set" on page 26. ACCESS CHANNEL LIST 2 Press PUSH JOG %fi to place the pointer next to "CH EDIT", then press OK or PUSH JOG .
30 EN TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your video recorder off for repair . POSSIBLE CAUSE ● The mains power cord is discon- nected.
EN 31 CORRECTIVE ACTION Insert a cassette, or using adhesive tape, reseal the slot where the tab was removed. Set to the desired channel. Confirm that the source is properly connected. Confirm that all units’ power switches are turned on. Set the input mode to “F-1”.
32 EN CORRECTIVE ACTION Position the camcorder so its microphone is away from the TV . T urn the TV’s volume down. If you need the skipped channels, restore them ( Z pg. 27). Press P AUSE to pause the recording, change channels, then press PLA Y to resume recording.
EN 33 QUESTIONS AND ANSWERS PLA YBACK Q. What happens if the end of the tape is reached during playback or search? A. The tape is automatically rewound to the beginning. Q. Can the video recorder indefinitely remain in the still mode? A. No. It stops automatically after 5 minutes to protect the heads.
34 EN INDEX 4 ANT . IN Connector Z pg. 3 5 RF OUT Connector Z pg. 3 1 Mains Power Cord Z pg. 3 2 Lithium Battery Compartment Z pg. 5 3 AUDIO/VIDEO OUT Connectors Z pg. 3, 22 FRONT VIEW 1 POWER Button Z pg. 5 2 Cassette Loading Slot 3 COLOUR SYSTEM Button Z pg.
EN 35 DISPLA Y P ANEL 1 B.E.S.T . Picture System Display Z pg. 17 2 Symbolic Mode Indicators 3 T ape Speed Indicators Z pg. 14 4 "T imer" Indicator Z pg.
36 EN INDEX (cont.) This remote control transmits A code signals only; it is not applicable to B code signals. How T o Use The remote control can operate most of your video recorder's functions, as well as basic functions of JVC TV sets. (See below .
EN 37 SPECIFICA TIONS GENERAL Power requirement Rating : AC 1 10 – 240 V ` , 50/60 Hz Operating : AC 0 90 – 260 V ` , 50/60 Hz Power consumption : 18 W T emperature Operating : 5°C to 40°C Storage : –20°C to 60°C Operating position : Horizontal only Dimensions (WxHxD) : 400 x 94 x 277 mm W eight : 3.
COPYRIGHT © 1998 VICTOR COMPANY OF JAPAN, LTD. MS Printed in Malaysia 0798YIV * UN * PJ V ICTOR COM P ANY OF JAPAN, LIMITED HR-J251MS EN.
An important point after buying a device JVC HR-J251MS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC HR-J251MS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC HR-J251MS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC HR-J251MS you will learn all the available features of the product, as well as information on its operation. The information that you get JVC HR-J251MS will certainly help you make a decision on the purchase.
If you already are a holder of JVC HR-J251MS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC HR-J251MS.
However, one of the most important roles played by the user manual is to help in solving problems with JVC HR-J251MS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC HR-J251MS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
