Instruction/ maintenance manual of the product HR-DD949EE JVC
Go to page of 52
VIDEO CASSETTE RECORDER INSTRUCTIONS LPT0002-0K1B H R-DD949EE PAL S C E N E F I N D E R P R O G C H E C K T V V O L C.MEMORY DISPLAY DAILY AUX ADD TIME C.
2 EN SAFETY FIRST Safety Precautions The rating plate and the safety caution are on the rear of the unit. W ARNING: DANGEROUS VOL T AGE INSIDE W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. IMPORT ANT n Please read the various precautions on this page before installing or operating the recorder .
EN 3 Basic Connections It's essential that your video recorder be properly connected. Follow these steps carefully . THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERA TION CAN BE PERFORMED.
4 EN INITIAL SETTINGS When the button on the recorder/remote control is pressed for the first time to power on the recorder after you plug the mains power cord into a mains outlet, the Auto Set Up function sets the tuner channels automatically . Y ou can refer to the front display panel and/or the on-screen display to perform this procedure.
EN 5 Language Set This recorder offers you the choice to view on-screen messages in English or Russian. Select the desired language using this procedure. The default setting is Russian. ● Be sure to set your V ideo Channel before performing Language setting ( Z pg.
6 EN V ideo Channel Set INITIAL SETTINGS (cont.) V ideo Channel (RF Output Channel) is the channel on which your TV receives picture and sound signals from the video recorder through the RF cable.
EN 7 SELECT TV SYSTEM 3 Press TV PROG + or – to set appropriate TV system that matches the system of TV being used (refer to the table below). EXIT VIDEO CHANNEL SET MODE 4 Press OK to finish the setting.
8 EN Clock Set T urn on the TV and select the VIDEO channel (or AV mode). 12 45 3 6 8 0 7 9 2 4 1 3 PUSH JOG OK MENU TURN THE RECORDER ON 1 Press . ACCESS MAIN MENU SCREEN 2 Press MENU twice. ACCESS CLOCK SET SCREEN 3 Move the highlight bar (pointer) to "CLOCK SET" by pressing PUSH JOG %fi , then press OK .
EN 9 On-Screen Displays Y ou can choose whether or not to have various operational indicators appear on screen, by setting this function ON or OFF . Messages appear in the selected language ( Z pg. 5). T urn on the TV and select the VIDEO channel (or AV mode).
10 EN PLA YBACK Basic Playback The easiest, most basic operation possible with your video recorder is tape playback. Already-recorded signals on a video tape are read by your video recorder and displayed on your TV just like a TV programme.
EN 11 Playback Features 5 / 8 ¡ 1 8 q 6 T ake advantage of special functions possible with the recorder ’ s controls or the remote control. 0 4 1 3 Still Picture/Frame-By-Frame Playback P AUSE DURING PLA YBACK 1 Press P AUSE. If there is vertical jitter, use the TV PROG buttons to correct the picture.
12 EN PLA YBACK (cont.) Manual T racking Y our video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the TV PROG buttons. OVERRIDE AUTOMA TIC TRACKING 1 Press SP/LP ( ) on the remote to engage manual tracking.
EN 13 Index Search Y our recorder automatically marks index codes at the beginning of each recording. This function gives you quick access to any one of 9 index codes in either direction. NOTE: Before starting, make sure the recorder is in the Stop mode.
14 EN Spatializer W This feature expands sound field when you play back any stereo source or view a stereo programme while recording it. *Spatializer W has no effect on recording quality . PLA YBACK (cont.) 5 / 8 ¡ 1 8 q 6 ACTIV A TE SP A TIALIZER W 1 Press SP A TIALIZER ; the current setting will be displayed on the screen for about 5 seconds.
EN 15 ACTIV A TE SCENE FINDER 1 Press SCENE FINDER . The recorder starts forward high- speed sear ch for 5 seconds and then fast-forwards 10 minutes on the counter . This cycle is repeated until the end of the tape is reached. ● T o start Scene Finder in the reverse direction, press SCENE FINDER and then press the REW button within 2 seconds.
16 EN PLA YBACK (cont.) TimeScan Y our recorder is equipped with the TimeScan function. T imeScan allows noise free pictures to be displayed on your TV screen in the forward and reverse search modes. Audio will be played back at normal speed during any of the T imeScan modes ( Z pg.
EN 17 Names of special-ef fects playback Reverse Forward Search Play Slow-Motion *Still Slow-Motion Play Search -9x -7x -5x -3x -1x -1/6x -1/18x 0 1/18x 1/6x 1x 2x 3x 5x 7x 9x -7x -3x -1/6x -1/18x 0 1/18x 1/6x 1x 2x 5x 9x Audio is output. Audio is not Audio is Audio is not Audio is output.
18 EN TV signals being received by the recorder ’ s built-in tuner can be recorded onto a video tape. Y ou can “capture” a TV programme using your video recorder . RECORDING Basic Recording T urn on the TV and select the VIDEO channel (or AV mode).
EN 19 Recording Features Record One Pr ogramme While W atching Another SELECT CHANNEL TO W A TCH 1 Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view .
20 EN B.E.S.T . Pictur e System T urn on the TV and select the VIDEO channel (or AV mode). 5 / 8 ¡ 1 8 q 6 RECORDING (cont.) The B.E.S.T . (Biconditional Equalised Signal T racking) system checks the condition of the tape in use during recording and playback, and compensates to provide the highest-possible recording and playback pictures.
EN 21 12 45 3 6 8 0 7 9 2 4 1 3 5 / 8 ¡ 1 8 q 6 NOTES: ● The B.E.S.T . system works for both SP and LP modes only after a tape has been inserted and the Record mode is first initiated. It does not work during recording. ● In the case of timer recording, the B.
22 EN The S HOW V IEW timer programming system eliminates the need to input channel, date, start and stop time data when setting the timer record function. Simply key in the S HOW V IEW number for the TV program you wish to record (found in most TV listings) and the recorder’s timer is automatically programmed.
EN 23 ACCESS GUIDE PROG SET SCREEN 4 Press PUSH JOG % fi to move the highlight bar (pointer) to "GUIDE PROG SET", then press OK . The Guide Prog. Set screen appears. ENTER SHOWVIEW NUMBER 5 Press OK , and a cursor appears above “GUIDE PROG”.
24 EN 5 / 8 ¡ 1 8 q 6 TIMER RECORDING (cont.) S HOW V IEW Timer Recording ACCESS TIMER PROGRAMMING SCREEN 1 Press PROG . The front display panel looks like this: ENTER SHOWVIEW NUMBER 2 Press the NUMBER keys to enter the S HOW V IEW number of a programme you wish to record.
EN 25 ● Make sure the channel position number you wish to record is displayed; if not, see "S HOW V IEW Setup" on page 22 and set the Guide Program number for that S HOW V IEW number correctly . ● If the number you entered is invalid, "ERROR" appears on the screen and "Err" appears on the display panel.
26 EN Regular Timer Pr ogramming Remember , the clock must be set before you can programme the timer ( Z pg. 8). Before performing the following steps: ● Insert a cassette with the safety tab in place. The recorder will come on automatically . ● T urn on the TV and select the VIDEO channel (or A V mode).
EN 27 12 45 3 6 8 0 7 9 2 4 1 3 ENTER CHANNEL POSITION 6 Press TV PROG +/– . IMPORT ANT Be sure to confirm the setting of VPS recording. ● If " ON" is displayed on the screen or " " is lit on the display panel, VPS is set to ON.
28 EN Auto Timer When the Auto T imer is set to "ON" the timer is automatically engaged when the recorder power is turned off and automati- cally disengaged when the recorder is powered back on.
EN 29 5 / 8 ¡ 1 8 q 6 Auto SP/LP Timer If, when recording in SP mode, there is not enough tape to record the entire programme, the recorder automatically switches to LP mode (with P AL broadcasts) to allow complete recording. ENGAGE AUTO SP/LP TIMER 1 Press AUTO SP/LP TIMER on the recorder front panel.
30 EN TV Multi- Brand Remote Contr ol SPECIAL FEA TURES Y our remote control can operate the basic functions of your TV set. In addition to JVC TVs, other manufacturer ’ s TVs can also be controlled by setting the appropriate switch on the remote control.
EN 31 Y our remote control can operate the basic functions of your satellite tuner set. In addition to JVC satellite tuner s, other manufacturer’ s satellite tuners can also be controlled by setting the appropriate switch on the remote control. Before you start .
32 EN EDITING Edit T o Or Fr om Another V ideo Recorder Y ou can use your video recorder as the source player or the recording deck. MAKE CONNECTIONS 1 Connect the player’s 21-pin SCAR T (A V) connector to the recorder’ s 21-pin SCAR T (AV) connector as illustrated on page 33.
EN 33 Another recorder RF Cable (provided) Another recorder Recorder 21-pin SCAR T Cable (not provided) Player Y our recorder Recorder Y our recorder TV Receiver TV Receiver RF Cable (provided) 21-pin.
34 EN Y ou can use a camcorder as the source player and your video recorder as the recorder . Edit Fr om A Camcorder MAKE CONNECTIONS 1 Connect the camcorder’s AUDIO/VIDEO OUT connectors to the recorder ’ s front panel AUDIO/VIDEO input connectors.
EN 35 5 / 8 ¡ 1 8 q 6 5 / 8 ¡ 1 8 q 6 Audio dubbing replaces the normal audio sound of a previously recorded tape with a new soundtrack. Audio Dubbing Original sound AUDIO OUT Audio mixer MAKE CONNECTIONS 1 Connect an audio component to the AUDIO IN L + R connectors on the recorder's front panel.
36 EN 5 / 8 ¡ 1 8 q 6 Insert editing replaces part of the recorded scene with new material. Both the picture and Hi-Fi audio soundtrack are replaced with new ones, while the normal audio soundtrack remains unchanged. If you wish to change the normal audio track as well, use the audio dubbing function simultaneously .
EN 37 ENGAGE INSER T EDITING 6 Press INSERT . ● Y our recorder enters the Insert-Pause mode. (" ", " " and " " light up on the front display panel.) ● The TV screen changes from the still picture to the input source you are going to record.
38 EN INFORMA TION ON J TERMINAL J T erminal (JLIP(Joint Level Interface Protocol) Connector) The J T erminal is used to connect the recorder to a personal computer or similar device to allow computerized control of the recorder during editing and certain other operations.
EN 39 T urn on the TV and select the VIDEO channel (or AV mode). PERFORM AUTO CHANNEL SET 3 Press PUSH JOG % fi to move the highlight bar (pointer) to "AUT O CH SET", then press OK to initiate Auto Channel Set. ● The Auto Set screen appears, and remains on screen while the recorder sear ches for receivable stations.
40 EN TUNER SET (cont.) Storing Channels Manually Store channels that were not stored during Auto Set Up ( Z pg. 4) or Auto Channel Set ( Z pg. 39). ACCESS MAIN MENU 1 Press MENU twice. ACCESS CONFIRMA TION SCREEN 2 Press PUSH JOG %fi to move the highlight bar (pointer) to “MANUAL CH SET”, then press OK .
EN 41 Delete A Channel Perform steps 1 and 2 of "Storing Channels Manually" on page 40 to access the Confirmation screen before continuing. SELECT ITEM 1 Press PUSH JOG % fi until the item you want to delete begins blinking. DELETE CHANNEL 2 Press CANCEL .
42 EN Fine-T uning Channels Already Stored SELECT ST A TION NAME CHARACTER 2 Press PUSH JOG and the first letter of the station name begins blinking. ENTER NEW CHARACTER 3 Press PUSH JOG % fi to cycle through the characters (A–Z, 0–9, –, * , +, (space)) and stop when the desired one is indicated, then press PUSH JOG to enter .
EN 43 TV Station And ID List ID* ST ATION NAME 1000 TV1000 3SA T 3SAT ADL T ADUL T ANT3 ANTENA3 ARD ARD ARTE AR TE BBC BBC GROUP BBC1 BBC1 BBC2 BBC2 BR3 BA YERN3 C+ CANAL PLUS C1 PORTUGUSES CAN5 CANAL.
44 EN TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your video recorder off for repair . POSSIBLE CAUSE ● The mains power cord is discon- nected.
EN 45 CORRECTIVE ACTION Insert a cassette, or using adhesive tape, reseal the slot where the tab was removed. Set to the desired channel. Confirm that the source is properly connected. Confirm that all units’ power switches are turned on. Set the input mode to “AU”.
46 EN CORRECTIVE ACTION Position the camcorder so its microphone is away from the TV . T urn the TV’ s volume down. If you need the skipped channels, restore them ( Z pg. 40). Press P AUSE to pause the recording, change channels, then press PLA Y to resume recording.
EN 47 QUESTIONS AND ANSWERS PLA YBACK Q. What happens if the end of the tape is reached during playback or search? A. The tape is automatically rewound to the beginning. Q. Can the video recorder indefinitely remain in the still mode? A. No. It stops automatically after 5 minutes to protect the heads.
48 EN FRONT VIEW INDEX S L O W S L O W 5 / 8 ¡ 1 q 6 VIDEO TIMER (MONO) L–AUDIO–R TV PROG 3R PICTURE AUTO SP/LP TIMER SP/LP TV PROG/ JOG SHUTTLE A. DUB SPATIALIZER INSERT 8 REW FF +8 4 0 6 10 –20dB NORM L R M SP LP EP REMAIN REVIEW 3 4 6 2 5 7 0 9 8 1 ! @ ^ & # $ % * ( ) q w Open the lid to access covered connectors and buttons.
EN 49 REAR VIEW 5 ANT . IN Connector Z pg. 3 6 AV2 IN Connector Z pg. 32 7 Remote PAUSE Connector Z pg. 34 8 RF OUT Connector Z pg. 3 1 Mains Power Cord Z pg. 3 2 AUDIO OUT(L/R) Connectors Z pg. 3 3 A V1 IN/OUT Connector Z pg. 3, 32 4 J T erminal [JLIP(Joint Level Interface Protocol) Connector] Z pg.
50 EN INDEX (cont.) REMOTE CONTROL Buttons with a small dot on the left side of the name can also be used to operate your TV with the TV/SA T/VCR switch set to "TV". Z pg. 30 S C E N E F I N D E R P R O G C H E C K T V V O L . C.MEMORY DISPLAY DAILY AUX ADD TIME C.
EN 51 SPECIFICA TIONS GENERAL Power requirement Rating : AC 1 10 – 240 V ` , 50/60 Hz Operating : AC 90 – 260 V ` , 50/60 Hz Power consumption : 24 W T emperature Operating : 5°C to 40°C Storage : –20°C to 60°C Operating position : Horizontal only Dimensions (WxHxD) : 430 x 94 x 348 mm W eight : 4.
EN COPYRIGHT © 1997 VICTOR COMPANY OF JAPAN, LTD. EE Printed in Japan 0997HOV * UN * VP VICTOR COMP ANY OF JAPAN, LIMITED HR-DD949EE.
An important point after buying a device JVC HR-DD949EE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC HR-DD949EE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC HR-DD949EE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC HR-DD949EE you will learn all the available features of the product, as well as information on its operation. The information that you get JVC HR-DD949EE will certainly help you make a decision on the purchase.
If you already are a holder of JVC HR-DD949EE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC HR-DD949EE.
However, one of the most important roles played by the user manual is to help in solving problems with JVC HR-DD949EE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC HR-DD949EE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
