Instruction/ maintenance manual of the product HM-DH5U JVC
Go to page of 92
HM-DH5U i.LINK AUDIO MONITOR REC SPEED REC PA USE D–VHS DOLBY–D CH STOP D–THEATER D–VHS HDMI TIMER EJECT POWER PCM DTS REW PLAY FF HDMI F – 1 VIDEO ( MONO ) L–AUDIO–R S–VIDEO ––––– MENU ––––– K MTP NTSC For Customer Use: Model No .
Masterpage:Left-FullCol 2 EN Filename [HM-DH5U_Eng.fm] Dear Customer, Thank you for purchasing the JVC D- VHS video cassette recorder. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new VCR.
Masterpage:Right-FullCol EN 3 Filename [HM-DH5U_Eng.fm] IMPORTANT PRODUCT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions. But improper use can result in po tential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety.
Masterpage:Left-FullCol 4 EN Filename [HM-DH5U_Eng.fm] USE 1. Accessories To avoid personal injury: • Do not place this product on an unstable cart, stand, tripod, bracket, or table. I t may fall, causing serious injury to a child or adult, and serious damage to the product.
Masterpage:Right-FullCol EN 5 Filename [HM-DH5U_Eng.fm] Failure to heed the following pr ecautions may result in damage to the VCR, Remote or video cassette. 1. DO NOT place the VCR… … in an environment prone to ext reme temperatures or humidit y.
Masterpage:Left-FullCol 6 EN Filename [HM-DH5U_TOC.fm] CONTENTS INDEX 7 Front panel.................................................... 7 Rear panel .................................................... 8 Front display panel ...........................
Masterpage:Right-FullCol EN 7 Filename [HM-DH5U_Eng.fm] INDEX Front panel A [POWER] button : A page 28, 36 B [TIMER j ] button : A page 41, 45, 46 C [D-VHS] LED : A page 35, 36 D [HDMI] LED : A page 1.
Masterpage:Left-FullCol 8 EN Filename [HM-DH5U_Eng.fm] INDEX (cont.) Rear panel A AC power cord : A page 13 B Cooling fan • This prevents the temperatur e from rising inside the VCR. Do not remove it. • Install the VCR so as not to block the area around the cooling fan.
Masterpage:Right-FullCol EN 9 Filename [HM-DH5U_Eng.fm] Front display panel A Progressive mode indicat or : A page 14, 65 B Timer mode indicator : A page 41, 45 C Satellite Auto Reco rding indicator : A page 47 D Channel/auxiliary input ([ L1],[L2],[F1],[I-1] etc.
Masterpage:Left-FullCol 10 EN Filename [HM-DH5U_Eng.fm] INDEX (cont.) On-screen display A Cassette indication B Cassette type indication : A page 35 C Index no.
Masterpage:Right-FullCol EN 11 Filename [HM-DH5U_Eng.fm] Remote A [VCR/TV/CABLE/DBS] select or : A page 76 - 78 B [A/B/C/D] button : A page 78 C [OK] button D [PROGRAM] button : A page 40, 44 E [STOP .
Masterpage:Left-FullCol 12 EN Filename [HM-DH5U_Eng.fm] INSTALLING YOUR NEW VCR Connections NOTES: • HDMI will be automatically activated (HDM I-ON) when a HDMI connectio n has been made. To de-activate (HDMI-OFF), press [HDMI] on the front panel and the [HDMI] LED will turn off.
Masterpage:Right-FullCol EN 13 Filename [HM-DH5U_Eng.fm] Basic Connection A Check contents Make sure the package contains all of the accessories listed in ‘SPECIFICATIONS’ ( A page 89). B Situate VCR Place the VCR on a stable, horizontal surface. C Connect VCR to TV The following connections are required.
Masterpage:Left-FullCol 14 EN Filename [HM-DH5U_Eng.fm] INSTALLING YOUR NEW VCR (cont.) NOTES: • If you have made a component video connection and your TV’s component video connec tors support onl.
Masterpage:Right-FullCol EN 15 Filename [HM-DH5U_Eng.fm] Digital Set Top Box Connection If you are using a HD Ready TV, you can m ake use of this connection to connect to the VCR. First, check the conten ts and situate the VCR as instructed in steps A and B on page 13.
Masterpage:Left-FullCol 16 EN Filename [HM-DH5U_Eng.fm] INITIAL SETTINGS Plug & Play Setting Auto Clock Set/Auto Tuner Set This VCR sets the clock and tuner channels automatically when AC power cord is first connected to an AC outlet. The antenna cable must be connected for the Plug & Play setting.
Masterpage:Right-FullCol EN 17 Filename [HM-DH5U_Eng.fm] Clock Setting Perform clock se tting only if the clock has not been set correctly by the Plug & Play setting or if you use a cable box. Access the Clock Set screen to perf orm the Semiauto or Manual Clock Set.
Masterpage:Left-FullCol 18 EN Filename [HM-DH5U_Eng.fm] INITIAL SETTINGS (cont.) Setting clock semiautomatically — Semiauto Clock Set You can change the host chan nel/D.S.T. /time zone setting manually. First follow steps A to B on page 17, then go to the following steps.
Masterpage:Right-FullCol EN 19 Filename [HM-DH5U_Eng.fm] Setting clock manually — Manual Clock Set First follow steps A to B on page 17, then go to the following s teps. C Access Manual Clock Set screen Press [ FG ] to move the arrow to “MANUAL CLOCK SET”, then press [OK].
Masterpage:Left-FullCol 20 EN Filename [HM-DH5U_Eng.fm] INITIAL SETTING (cont.) Tuner Setting Setting channels automatically — Auto Channel Set Use Auto Channel Set only if channels have not been set correctly by the Plug & Play setting. If you want to add or delete channels, use Manual Channel Set ( A page 21).
Masterpage:Right-FullCol EN 21 Filename [HM-DH5U_Eng.fm] Setting channels manually — Manual Channel Set You can add the channels you want or delete the channels you do not want manually. A Access Main Menu screen Press [MENU]. B Access Tuner Set Up screen A Press [ D E ] to move the arrow to “TUNER SET UP”, then press [ G ] or [OK].
Masterpage:Left-FullCol 22 EN Filename [HM-DH5U_Eng.fm] INITIAL SETTING (cont.) Cable Box Control Setting Suggested location Place the cable box on top of the VCR. Attach the VCR’s Controller to the top of the VCR with the Controller’ s transmitter pointed towards the cable box’s remote sensor.
Masterpage:Right-FullCol EN 23 Filename [HM-DH5U_Eng.fm] Setting cable box input channel & brand After installation, set the cable box input channel and its brand correctly; otherwise, the Controller cannot work correctly. A Turn on cable box Select a channel other than channel 9 on your cable box.
Masterpage:Left-FullCol 24 EN Filename [HM-DH5U_Eng.fm] INITIAL SETTING (cont.) E Enter cable box brand F Engage test mode Press [ FG ] to move the arrow to “TEST MODE”, then press [OK]. NOTE: If you do not engage the test mode in step F , “INPUT CH” and “BRAND” are not set.
Masterpage:Right-FullCol EN 25 Filename [HM-DH5U_Eng.fm] DBS Receiver Control Setting Suggested location Place the DBS (Direct Broadcast Satellite) receiver on top of the VCR. Attach the VCR’ s Controller to the top of th e VCR with the Co ntroller’s trans mitter pointed towards the DBS receiver’s remote sensor.
Masterpage:Left-FullCol 26 EN Filename [HM-DH5U_Eng.fm] INITIAL SETTING (cont.) Setting DBS receiver input channel & brand After installation, set the DBS receiver’s input channel and its brand correctly; otherw ise, the Controller ca nnot work correctly.
Masterpage:Right-FullCol EN 27 Filename [HM-DH5U_Eng.fm] NOTES: • The Controller may not work with all types of DBS receiver. • If your DBS receiver does not respond to the code, you cannot use the Controller to change satellite channels.
Masterpage:Left-FullCol 28 EN Filename [HM-DH5U_Eng.fm] PLAYBACK Basic Playback This VCR can check the tape condition during playback (and recording), and realize the best possible pictures. • This VCR can play back tapes that have been recorded in D-VHS (MTP), S-VHS, S-VHS ET and VHS formats and automatically identifi es the recording format.
Masterpage:Right-FullCol EN 29 Filename [HM-DH5U_Eng.fm] Basic Playback Features A Checking tape position The position of “ Z ” in relation to “B” (Beginning) or “E” (End) shows you where you are on the tape. NOTES: • “SUPERIMPOSE” must be set to “ON”, or the indicator will not appear ( A page 66).
Masterpage:Left-FullCol 30 EN Filename [HM-DH5U_Eng.fm] PLAYBACK (cont.) C Adjusting tracking condition — Tracking Adjustments Automatic tracking adjustment This VCR automatically adju sts the tracking condition.
Masterpage:Right-FullCol EN 31 Filename [HM-DH5U_Eng.fm] E Automatic operations after rewinding — Next Function Memory The Next Function Memory tells the VCR what to do after rewinding is complete. • Ensure that the VCR is in stop mode. a– For Automatic Playback Start Press [REW ( O )], then press [PLAY ( I )] within 2 seconds.
Masterpage:Left-FullCol 32 EN Filename [HM-DH5U_Eng.fm] PLAYBACK (cont.) Some D-Theater tapes or D-VHS tapes may contain m ultiple pr ograms, angles, sounds or subt i tles. If a ta pe contains them, the icons appear on the top right corner of the TV screen when you press [OSD].
Masterpage:Right-FullCol EN 33 Filename [HM-DH5U_Eng.fm] Special Effect Playback With this VCR, you can en joy special effect playback such as high-speed search, variable-speed search, and still playback and so on.
Masterpage:Left-FullCol 34 EN Filename [HM-DH5U_Eng.fm] PLAYBACK (cont.) B Viewing still picture — Still Pictur e Playback Press [PAUSE ( W W W W )] during normal playback. The pause indicator [ W ] on the front display panel lights up. Playback is freezed and a still picture appears.
Masterpage:Right-FullCol EN 35 Filename [HM-DH5U_Eng.fm] RECORDING Basic Recording NOTES: • When a new D- VHS tape is inserted, “AUT” is always selected regardless of the previous recording speed selected. • You can perform D-VHS recording of a program which is timer-programmed on your Integrated HDTV (or Digital Set Top Box) by using ‘i.
Masterpage:Left-FullCol 36 EN Filename [HM-DH5U_Eng.fm] RECORDING (cont.) D-VHS/S-VHS/VHS Recording A Load a cassette Make sure the record safety tab is intact.
Masterpage:Right-FullCol EN 37 Filename [HM-DH5U_Eng.fm] Basic Recording Features A Changing display information Press [DISPLAY]. Each time you press the button, the front display panel shows the clock time, remaining ti me and the time counter in sequence.
Masterpage:Left-FullCol 38 EN Filename [HM-DH5U_Eng.fm] RECORDING (cont.) C Watching one program while recording another 1 Engage TV mode During recording... • Change the TV’s input mode from AV to TV. 2 Select channel for viewing Select the channel you want to watch, on the TV.
Masterpage:Right-FullCol EN 39 Filename [HM-DH5U_Eng.fm] Other useful functi ons for recording You can also use the fo llowing functions for recording.
Masterpage:Left-FullCol 40 EN Filename [HM-DH5U_Eng.fm] TIMER RECORDING VCR Plus+ ® Timer Programming Timer record ing allows you to pr ogram the VCR to automatically record a broad cast at some fu ture time.
Masterpage:Right-FullCol EN 41 Filename [HM-DH5U_Eng.fm] D Input receiving channel number Press [ D E ] to input the number of the channel on which the broadcast for the PlusCode number is received on the VCR or cable box, then press [OK].
Masterpage:Left-FullCol 42 EN Filename [HM-DH5U_Eng.fm] TIMER RECORDING (cont.) Changing VCR Plus+ ® Setting To ensure that VCR Plus+ timer recording operates correctly, it is nece ssary to set the VCR Plus+ “Guide Channel Set” for each stat ion.
Masterpage:Right-FullCol EN 43 Filename [HM-DH5U_Eng.fm] A Access Main Menu screen Press [MENU]. B Access Guide Channel Set screen C Input guide channel number In that case, it is possi ble to change the channel by 10 channels by pressing and holding [ D E ] in steps C and D .
Masterpage:Left-FullCol 44 EN Filename [HM-DH5U_Eng.fm] TIMER RECORDING (cont.) Express Timer Programming You can directly program the VC R’s timer to record up to 24 broadcasts, as far as a year in advance. Rem ember, the clock must be set before you can program the timer ( A page 17).
Masterpage:Right-FullCol EN 45 Filename [HM-DH5U_Eng.fm] H Set recording speed Press [REC SPEED] to se t the recording speed. I Return to n ormal scre en Press [ D E ] to move the arro w to “CONFIRM”, then press [OK].
Masterpage:Left-FullCol 46 EN Filename [HM-DH5U_Eng.fm] TIMER RECORDING (cont.) A Checking program settings 1 Disengage timer Press [TIMER ( j )], then press [ POWER]. • When “AUTO TIMER ” ( A page 66) is set to “ON”, you do not have to press [TIMER ( j )].
Masterpage:Right-FullCol EN 47 Filename [HM-DH5U_Eng.fm] Satellite Auto Recording This function allows you to automatic ally record a satellite program which is timer-programmed on your DBS receiver.
Masterpage:Left-FullCol 48 EN Filename [HM-DH5U_Eng.fm] TIMER RECORDING (cont.) i.LINK Timer Programming This VCR can perform D-VHS recording of a program which is timer-p rogrammed on your Integrated HD TV (or Digital Set Top Box). A Load a D-VHS cassette Make sure the record safety tab is intact.
Masterpage:Right-FullCol EN 49 Filename [HM-DH5U_Eng.fm] Video Remote Control Timer Programming This VCR can perform analog recording of a progr am which is timer-p rogrammed on your Integrated HD TV (or Digital Set Top Box). A Load a cassette Make sure the record safety tab is intact.
Masterpage:Left-FullCol 50 EN Filename [HM-DH5U_Eng.fm] TIMER RECORDING (cont.) END of TIMER RECORDING ATTENTION: • If there is a conflict in the ti mer schedule and one program overlaps wit h another, only the parts shown below in gray will be recorded.
Masterpage:Right-FullCol EN 51 Filename [HM-DH5U_Eng.fm] VIDEO NAVIGATION Navigation Playback This function is useful when you want to quickly find programs you have recorded on a tape using this VCR. This function allows you to select a program to watch, and then automatically search for the beginning of the program.
Masterpage:Left-FullCol 52 EN Filename [HM-DH5U_Eng.fm] VIDEO NAVIGATION (cont.) A Deactivating Video Navigation If you do not want to store program information, you can deactivate the Video Navigation function. 1 Access Video Navigation screen Press [NAVI].
Masterpage:Right-FullCol EN 53 Filename [HM-DH5U_Eng.fm] Finding Tapes You can find a tape you want using Video Navigation. You have four methods to find tapes; by tape number, by program title, by category, by recording date, and by tape remaining time.
Masterpage:Left-FullCol 54 EN Filename [HM-DH5U_Eng.fm] VIDEO NAVIGATION (cont.) B Finding by program title Use the Remote to do the following operations. 1 Follow steps 1 to 2 on page 53, then go to the following steps 2 Access title screen 3 Confirm lists • To go to another page of the lists, pre ss [<] or [>].
Masterpage:Right-FullCol EN 55 Filename [HM-DH5U_Eng.fm] D Finding by recording date Use the Remote to do the followi ng operations. 1 Follow steps 1 to 2 on page 53, then go to the following steps 2 Access date screen 3 Confirm lists • To go to another page of the lists, press [<] or [>].
Masterpage:Left-FullCol 56 EN Filename [HM-DH5U_Eng.fm] VIDEO NAVIGATION (cont.) E Finding blank space You can find a tape who se re maining time is enough for a program you want to record. Use the Remote to do the following operations. 1 Access Video Navigation screen Press [NAVI].
Masterpage:Right-FullCol EN 57 Filename [HM-DH5U_Eng.fm] Editing Titles When you record a TV program on this VCR, the VCR automatically records the reco rding start time, date, and channel in each program title. If the tape is recorded for the first time, the tape number and the date and time are recorded in the tape title.
Masterpage:Left-FullCol 58 EN Filename [HM-DH5U_Eng.fm] VIDEO NAVIGATION (cont.) 5 Access edit screen 6 Enter title Press the ‘Number’ keys to enter the title. • For entering the characters as the titl e, refer to ‘How to enter the characters and symbols’ on the right column.
Masterpage:Right-FullCol EN 59 Filename [HM-DH5U_Eng.fm] B Entering or Editing program title When you want to edit the program title, follow the procedure below by using the Remote. 1 Load a cassette Insert a tape on which t here is a program you want to edit.
Masterpage:Left-FullCol 60 EN Filename [HM-DH5U_Eng.fm] VIDEO NAVIGATION (cont.) C Editing program category When you want to change th e program category, follow the procedure below by using the Remote. 1 Load a cassette Insert a tape on which there is a program you want to edit.
Masterpage:Right-FullCol EN 61 Filename [HM-DH5U_Eng.fm] E Deleting program information When you want to delete th e stored information for each recorded program, follow the procedure below by using the Remote. • Program information for the Video Navigat ion function is deleted, but the recorded program will not be erased.
Masterpage:Left-FullCol 62 EN Filename [HM-DH5U_Eng.fm] OTHER USEFUL FUNCTIONS Useful Function Settings You can use the other useful function settings on the Function Set Up screens by following the procedure described below. The table below shows the stru cture of the menu system.
Masterpage:Right-FullCol EN 63 Filename [HM-DH5U_Eng.fm] Video settings “ VIDEO FUNCTION” *The default setting is bold in the table below. L L L L “V.
Masterpage:Left-FullCol 64 EN Filename [HM-DH5U_Eng.fm] OTHER USEFUL FUNCTIONS (cont.) Audio settings “ AUDIO FUNCTION” *The default setting is bold in the table below.
Masterpage:Right-FullCol EN 65 Filename [HM-DH5U_Eng.fm] Input/Output settings “ IN/OUT FUNCTION” *The default setting is bold in the table below. L L L L “TV OUTPUT 1 ” “WIDE 16:9” “NORMAL 4:3” Select the appropriate mode dependi ng on the type of TV you ha ve.
Masterpage:Left-FullCol 66 EN Filename [HM-DH5U_Eng.fm] OTHER USEFUL FUNCTIONS (cont.) *The default setting is bold in the table below. Additional settings “ ADDITIONAL” *The default setting is bold in the table below.
Masterpage:Right-FullCol EN 67 Filename [HM-DH5U_Eng.fm] *The default setting is bold in the table below. L L L L “POWER SAVE” “ON” “OFF” When this function is set to “ON ”, you can reduce the power consumption. While the VCR is turned off, the front displ ay panel does not show the clock.
Masterpage:Left-FullCol 68 EN Filename [HM-DH5U_Eng.fm] OTHER USEFUL FUNCTIONS (cont.) *The default setting is bold in the table below. L L L L “S-VHS E T” “ON” “OFF” This function allows you to record on VHS tapes with S-VHS pi cture quality.
Masterpage:Right-FullCol EN 69 Filename [HM-DH5U_Eng.fm] JLIP ID Number Setting The JLIP (Joint Level I nterface Protocol) terminal i s used to connect the VCR to a pers onal computer or similar device.
Masterpage:Left-FullCol 70 EN Filename [HM-DH5U_Eng.fm] OTHER USEFUL FUNCTIONS (cont.) i.LINK Set Up i.LINK set up for connected device When you connect i.LINK co mpatible devices to this VCR, an i.LINK device number is assigned to each device in the order of connection.
Masterpage:Right-FullCol EN 71 Filename [HM-DH5U_Eng.fm] What is i.LINK? i.LINK is a digital serial interface that allows devices equipped with an i.LINK connector to exchange digital video signals, digi tal audio signals, and device control signals bi-directionally over a single cable.
Masterpage:Left-FullCol 72 EN Filename [HM-DH5U_Eng.fm] EDITING i.LINK/DV Connections NOTES: • You cannot use the i.LINK conne ction depending on the type of camcorder equipped with the DV connector. In this case, set “LINC” to “OFF” ( A page 70).
Masterpage:Right-FullCol EN 73 Filename [HM-DH5U_Eng.fm] A Make connections A Connection with the camcorder Connect a DV cable between the camcorder’s DV connector and your VCR’s [i.LINK] connector. B Connection with the VCR Connect an i.LINK cable between the playback VCR’s i.
Masterpage:Left-FullCol 74 EN Filename [HM-DH5U_Eng.fm] EDITING (cont.) S-VIDEO/VIDEO Connections A Make connections A Connection with the camcorder Connect an audio/S-vi deo cable between the camcorder’s audio/S-video output connectors and your VCR’s [AUDIO/ S VIDEO] input connectors.
Masterpage:Right-FullCol EN 75 Filename [HM-DH5U_Eng.fm] B Connection with the VCR Connect an audio/S-video cable between the playback VCR’s au dio/S-video output connectors and the recording VCR’s [AUDIO/ S VIDEO INPUT] connectors.
Masterpage:Left-FullCol 76 EN Filename [HM-DH5U_Eng.fm] MULTI-BRAND REMOTE CONTROL TV Brand Setting When programmed (set) with a manufacturer’s (brand’s) code, this Remote can pe rf orm some of the remote control functions of the listed TVs. You can control a JVC TV without setting a brand code.
Masterpage:Right-FullCol EN 77 Filename [HM-DH5U_Eng.fm] Cable Box or DBS Receiver Brand Setting When programmed (set) with a manufacturer’s (brand’s) code, this Remote can perf orm some of the remote control functions of the list ed cable boxes or DBS (Direct Broadcast Satellite) receivers.
Masterpage:Left-FullCol 78 EN Filename [HM-DH5U_Eng.fm] MULTI-BRAND REMOTE CONTROL (cont.) Changing Remote Control Code NOTE: When “POWER SAVE” is set to “ON”, you can not change the remote control code. Before ch anging the code, set “POWER SAVE” to “OFF” ( A page 67).
Masterpage:Right-FullCol EN 79 Filename [HM-DH5U_Eng.fm] TROUBLESHOOTING Before requesting service, use this chart and see if you can r epair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your VCR off for repair.
Masterpage:Left-FullCol 80 EN Filename [HM-DH5U_Eng.fm] TROUBLESHOOTING (cont.) PLAYBACK RECORDING TIMER RECORDING SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 9. Sound cannot be heard. • When a HDMI to DVI conversion cable is connected between the VCR and TV, you need to connect the audio cable as well to receive sound output.
Masterpage:Right-FullCol EN 81 Filename [HM-DH5U_Eng.fm] TIMER RECORDING VIDEO NAVIGATION SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 4. [ j ] blinks on the front display panel.
Masterpage:Left-FullCol 82 EN Filename [HM-DH5U_Eng.fm] TROUBLESHOOTING (cont.) VIDEO NAVIGATION OTHER PROBLEMS SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 2. The VCR cannot search for the desired program. • Two (or more) tape numbers are recorded on one tape.
Masterpage:Right-FullCol EN 83 Filename [HM-DH5U_Eng.fm] The following conditions are pr oduct features and do not indi cate mechanical problems. Playback of tapes recorded in D-VHS mode • You may s.
Masterpage:Left-FullCol 84 EN Filename [HM-DH5U_Eng.fm] TROUBLESHOOTING (cont.) Error Codes and Messages Some error codes and messages may appear on the TV screen when operating the VCR.
Masterpage:Right-FullCol EN 85 Filename [HM-DH5U_Eng.fm] * For details of a digital tuner, refer to the inst ruction manual of the digital tuner. CODE MESSAGE DESCRIPTION 300 “CAN NOT DECODE VIDEO OR AUDIO USE SET TOP BOX OR HDTV TUNER” • A signal format that is not supported by this VCR w as input.
Masterpage:Left-FullCol 86 EN Filename [HM-DH5U_Eng.fm] TROUBLESHOOTING (cont.) Questions and answers PLAYBACK Q. What happens if the tape reaches its end du ring playback or search? A. The VCR automatic ally rewinds it to the beginning. . . . . . . .
Masterpage:Right-FullCol EN 87 Filename [HM-DH5U_Eng.fm] GLOSSARY Glossary Digital Broadcasts and D-VHS Great changes in the entertainment and media industries are transforming the way we use VHS, and digital broadcasting is a good example of what the future holds.
Masterpage:Left-FullCol 88 EN Filename [HM-DH5U_Eng.fm] LIST OF TERMS List of terms This guide serves as a quick w ay to locate frequently used terms and on-screen display names.
Masterpage:Right-FullCol EN 89 Filename [HM-DH5U_Eng.fm] SPECIFICATIONS GENERAL Power requirement : AC 120 V H , 60 Hz Power consumption Power on : 45 W Power off : 14 W Temperature Operating : 5°C t.
Masterpage:Left-FullCol 90 EN Filename [HM-DH5U_Eng.fm] WARRANTY (Only in U.S.A.) USA ONLY JVC COMPANY OF AMERICA (JVC) warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL RETAIL PURCHASER to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original purchase for the period shown below.
Masterpage:Right-FullCol EN 91 Filename [HM-DH5U_Eng.fm] MEMO HM-DH5U_Eng.fm Page 91 Tuesday, June 1, 2004 4:47 PM (X:100.0%, Y:100.0%) Created with Grafikhuset CMYK PDF Creator for keiji tanaka at Sanwa Document Services P/L.
HM-DH5U Printed in Malaysia 0604MNH-SW -VM U ATTENTION JVC EXPRESSLY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, AND SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, CLAIMS OR LIABILITIES, DIRECT OR IND.
An important point after buying a device JVC HM-DH5U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC HM-DH5U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC HM-DH5U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC HM-DH5U you will learn all the available features of the product, as well as information on its operation. The information that you get JVC HM-DH5U will certainly help you make a decision on the purchase.
If you already are a holder of JVC HM-DH5U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC HM-DH5U.
However, one of the most important roles played by the user manual is to help in solving problems with JVC HM-DH5U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC HM-DH5U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
