Instruction/ maintenance manual of the product GZ-MG50EK JVC
Go to page of 101
MasterP age: Cover GZ-MG50E/EK GZ-MG40E/EK GZ-MG30E/EK GZ-MG20E/EK L YT1472-001C EN ENGLISH HARD DISK CAMCORDER GETTIN G ST AR TED 7 VIDEO RECO RDING & PLA YBACK 22 MENU SETTINGS 48 52 T o deactivate the demonstr ation, set “DEMO MODE” to “OFF ”.
2 EN MasterP age: Body_Left Built-in Hard Disk This hard disk camer a records images to a large, built-in hard disk drive (HDD) instead of a D V tape lik e conv entional video camer as. This enables extended hours of hi gh-resolut ion, MPEG2 video recording.
EN 3 MasterP age: Reference_Heading0_Right GETTING STARTED 7 Provided Acces sories .................. .................... 7 Index ..... .................. ................. ...................... 10 Power ........... .................. ..............
4 EN MasterP age: Safty_Left SAFETY PRECAUTIONS Dear Customer , Thank you f or purchasing this hard disk camera. Bef ore use, please read the saf ety information and precautions co ntained in the pages 4 – 6 t o ensure saf e use of this product. IMPORT ANT (for ow ners in the U.
EN 5 MasterP age: Safty_Right SOME DO’S AND DON’TS ON THE S AFE USE OF EQUIPMENT This equipment has been designed and manufactured to meet inter national safety standards b ut, like any electrical equipment, care must be taken if y ou are to obtain the best results and safety is to be assure d.
6 EN MasterP age: Safty_Left DON’T lea ve equipment s witched on when it is unattended unless it is specif ically stated that it is designed f or unattended operation or has a standby mode. Switch off using the s witch on the equipment and make sure that y our family knows ho w to do this.
EN 7 GETTING ST ARTED MasterP age: Heading0_Right GETTING ST ARTED a AC Adapter AP-V14 E or AP-V 17E b P ower Co rd (AP-V1 4E only) c Batter y P ack BN-VF707U d Audio/Video Cable e USB Cable (Refer to the software inst allation and USB connec tion guide.
8 EN GETTING ST AR TED MasterP age: Body_Left Attaching the Shoulder Strap Fo llow the illu stration . 1 Open the v elcro strip. 2 Thread the st rap through the eyelet. 3 Fold it back and thread it th rough the strap guide and the buckle. ● T o adjust the length of the strap , loosen and then tighten the str ap in the buc kle.
GETTING ST ARTED EN 9 GETTING ST ARTED MasterP age: Start_Right Attaching the Core Filter Attach the co re filters to the cables. The core filter redu ces interf erence. 1 Release the stoppers on both ends of the core filter . 2 Run the cab le through the core filter , leavi ng approx.
10 EN MasterP age: Heading0_Left GETTING ST ARTED Index A TTENTION: ● Be careful no t to cover b , c , d , and e during shooting. ● Be careful no t to cover Y dur ing playbac k.
GETTING ST ARTED EN 11 GETTING ST ARTED MasterP age: Start_Right Controls a Mode Switch [MODE] ( 墌 pg. 17 ) b Light Button [LIGHT] ( 墌 pg . 31) c Inf ormation Button [INFO/ ] ( 墌 pg. 38) d Pla y/P ause Button [ 49 ] ( 墌 pg. 24, 29) e F orward Search B utton [ ( 5 )] ( 墌 pg.
12 EN GETTING ST AR TED MasterP age: Body_Left Indications on LCD Monitor During both Video and Still Image Recording a Manual Mod e Indicato r ( 墌 pg. 17) : A uto Mode : Manual Mode b T ele Mac ro Mode In dicator ( 墌 pg. 50) c Approximate Zoom Ratio ( 墌 p g.
GETTING ST ARTED EN 13 GETTING ST ARTED MasterP age: Start_Right During Video Playback a Mode Indicat or ( 墌 pg. 17) b Play List Playback Indicator (Appears whe n pla y list is p la yed back . 墌 pg. 43) c Picture Quality: [U] (ultra fine), [F] (f ine), [N] (normal), [E] (econom y) ( 墌 pg.
14 EN GETTING ST AR TED MasterP age: Body_Left This camera’s 2-wa y power supply s ystem lets you choose the most ap propri ate source of power . Do no t use provided power supply uni ts with other e quipment. Charging the Battery Pack 1 Set the po wer swit ch to OFF .
GETTING ST ARTED EN 15 GETTING ST ARTED MasterP age: Start_Right NOTES: ● This product includes patented and other proprietary technology and will operate onl y with JVC Data Battery . Use the JVC BN- VF707U/VF714U/VF733U battery pac ks. Using generic non-JVC batteries can cause damage to the internal char ging circuitry .
16 EN GETTING ST AR TED MasterP age: Body_Left Data Batter y System Y ou can check the remaining batter y power and the recordab le time. 1 Make su re the battery is attached. 2 Open the LC D monitor f ully . 3 Press INFO / repeated ly , and the batte ry status s creen appe ars.
GETTING ST ARTED EN 17 GETTING ST ARTED MasterP age: Start_Right T o turn on the camer a, set the pow er s witch to or while pr essing d own the l ock butto n located on the s witch. ● The power/ charge lamp turns on. T o turn off the camer a, set the pow e r s witch to OFF .
18 EN GETTING ST AR TED MasterP age: Body_Left The language on the displa y can be changed. ( 墌 pg. 48, 49) 1 Set the po wer s witch to or . 2 Press MENU . Th e menu screen appears. 3 Press / to select [DISPLA Y], then press 49 . 4 Press / to select [LANGU AGE], then press 49 .
GETTING ST ARTED EN 19 GETTING ST ARTED MasterP age: Start_Right The brig htness of the display can be adjusted . 1 Set the pow er switch to or while pressing down the l ock button located on the swi t ch . 2 Open the LCD monitor fu lly . ( 墌 pg. 9) 3 Press MENU .
20 EN GETTING ST AR TED MasterP age: Body_Left Y ou can use an SD card as a rec ording medium in the SD s lot. See pa ge 62 f or the guarante ed media to wo rk with this camera. 1 Make sure the ca mera’ s pow er is off . 2 Open the SD card cov er. 3 T o insert an SD card , fir mly inse r t it with it s clipped ed ge first.
GETTING ST ARTED EN 21 GETTING ST ARTED MasterP age: Start_Right Select the r ecording medi um before star ting recording o r playback. ( 墌 pg. 48, 49) Example: When rec ording still images to an SD card 1 Set the pow er s witch to or . 2 Press MENU .
22 EN MasterP age: Heading0_Left VIDEO RECORDING & PLA YB A CK 1 Set the po wer sw itch to . 2 Set the MODE switc h to . ● The camera is progr ammed to record videos on the built- in hard disk by the fa ctory-preset. T o switch the recording medium, see pages 21, 48 and 49.
VIDEO RECORDING & PLA YBA CK EN 23 VIDEO RECORDING & PLAYBACK MasterP age: Basic_Right Zooming Use the zoom function for close- up or wide- angle shoot ing. Y ou can zoom in up to 15x * by using the opti cal zoom. T o zoom in Slide the z oom lev er towards T (telepho to).
24 EN VIDEO RECORDING & PLA YB ACK MasterP age: Body_Left 1 Set the po wer sw itch to . 2 Set the MODE switc h to . ● The index scre en for video s appears.
VIDEO RECORDING & PLA YBA CK EN 25 VIDEO RECORDING & PLAYBACK MasterP age: Basic_Right How to Use th e Scroll Bar Y ou can use the ver tical scroll bar on the index screen to find th e desired files quic kly . The sc roll bar is usefu l when deleting files ( 墌 pg.
26 EN VIDEO RECORDING & PLA YB ACK MasterP age: Body_Left A White to A UDIO L IN* B Red to A UDIO R IN* C Y ellow to VIDEO IN (Connect when your TV/ VCR/VDR has only A/V input conn ectors.) D Black to S-VIDEO IN (Con nect when your TV/ VCR/VDR has S-VIDEO IN and A/V in put connectors .
VIDEO RECORDING & PLA YBA CK EN 27 VIDEO RECORDING & PLAYBACK MasterP age: Basic_Right The full-f unction remote co ntrol unit can op erate this camera f rom a dista nce as well a s the basi c operations (pl ayback, stop , pause, fast-forw ard and rewind) of your VCR.
28 EN MasterP age: Heading0_Left STILL IMA GE RECORDING & PLA YBA CK 1 Set the po wer sw itch to . 2 Set the MODE switc h to . ● The camera is progr ammed to record still images on the built -in hard disk by the f actor y-preset. T o switch the recording medium, see pages 21, 48 and 49.
STILL IMA GE RECORDING & PLA YBA CK EN 29 STILL IMAGE RECORDING & PLA YBACK MasterP age: Basic_Right 1 Set the pow er s witch to . 2 Set the MODE s witch to . ● The most recently sho t still image is d ispla yed. ● T o switch th e medium to be p la yed bac k, see pages 21, 48 and 49.
30 EN STILL IMA GE RECORDING & PLA YB A CK MasterP age: Body_Left How to Use the Scroll Bar Y ou can use the ver tical scroll bar on the index screen to fi nd the desi red files qui ckly . The sc roll bar is usefu l when de leting files ( 墌 pg. 39), setting DPOF ( 墌 pg.
EN 31 ADVANCED OPERA TIONS MasterP age: Menu_Heading0_Right RECORDING FEA TURES Backlight compensa tion brig htens the sub ject quickly . With simple operation, dark por tions of the subje ct are br ighten ed by increasi ng the exposure. 1 Set the pow er s witch to .
32 EN RECORDING FEA TURES MasterP age: Body_Left Y ou can use manual reco rding funct ions easily by selec ting items in th e MSET menus . How to Select a Menu Item 1 Set the po wer sw itch to . 2 Press and hold ( / ) so that is displayed. 3 Press ( ).
RECORDING FEA TURES EN 33 ADVANCED OPERA TIONS MasterP age: Menu_Right Manual Focus The camera's Full Ran ge AF system offers continuous focusing ability f rom close- up to infinity . Howe ver , the correc t focus ma y not be obtained de pending on the shooting condi tion.
34 EN RECORDING FEA TURES MasterP age: Body_Left White B alance The white balance is usu ally adjust ed automatic ally for correctness of th e colour reproductio n under v arious lighting. Howe ver , you can also select the following modes according t o the shoo ting situatio ns.
RECORDING FEA TURES EN 35 ADVANCED OPERA TIONS MasterP age: Menu_Right Shutter Speed Y ou can set the shutter speed man ually . A fast shutter spee d can freez e the motion of a f ast- moving subject and a sl ow shutter speed ca n blur the subjec t to give the impress ion of moti on.
36 EN RECORDING FEA TURES MasterP age: Body_Left Program AE Y o u can use th e progr am AE settin gs f o r specifi c shooting s ituations. 1 Select [P .AE] in the MSET menu. ( 墌 pg. 32) 2 Press / to select the desired mode . TWILIGHT : Ma kes e vening scenes l ook more natura l.
EN 37 ADVANCED OPERA TIONS MasterP age: Menu_Heading0_Right PLA YB ACK FEA TURES Y ou can view videos with va rious effe cts of scene transitio n. 1 Set the pow er s witch to . 2 Set the MODE s witch to . 3 Press MENU . The menu screen appears. 4 Press / to select [WIPE/F ADER], then press 49 .
38 EN MasterP age: Heading0_Left MANA GING FILES Y ou can view the file infor mation in playback mode. Information on Video Files Press INFO / whi le video playback is paused.
MANA GING FILES EN 39 ADVANCED OPERA TIONS MasterP age: Menu_Right T o protect all files 5 Press / to select [PRO TECT ALL], then press 49 . 6 Press / to select [EXECUTE], then press 49 . ● All files are protected. T o release protection of all files 5 Select [CANCEL ALL], then press 49 .
40 EN MANA GING FILES MasterP age: Body_Left T o delete by se lecting m ultiple files 5 Press / to select [FILE SELECT], then press 49 . ● The index scre en appears. 6 Press / / / to select the fil e you want to delete , then pre ss 49 . ● T o select other files, re peat step 6 .
MANA GING FILES EN 41 ADVANCED OPERA TIONS MasterP age: Menu_Right Y ou can cop y or mov e still image files between the built-in hard di sk (HDD) and SD c ard using the on-scree n displa y . Before proceeding to follo wing steps, ● Make s ure that SD card is inserted in the SD slot.
42 EN MANA GING FILES MasterP age: Body_Left By resetti ng the file number (name), a new f old er will be made. The new files you are going to make will be stored in the new f older . It is conv enient to separ a te the ne w files from previously re corded fil es.
MANA GING FILES EN 43 ADVANCED OPERA TIONS MasterP age: Menu_Right T o check the play list by playing back the video Y ou can check the pla y list bef ore sav ing it. 1 After step 10 , press to select a thumbna il image of the pl ay list. 2 Press / to select a scene you want to check.
44 EN MANA GING FILES MasterP age: Body_Left Add/Delete Files in Play List Y ou can edit existing play lists by adding or deleting files . 1 Set the power switch to . 2 Set the MODE switc h to . 3 Press MENU . Th e menu screen appears. 4 Press / to select [PLA Y LIST], then press 49 .
MANA GING FILES EN 45 ADVANCED OPERA TIONS MasterP age: Menu_Right Deleting Play List Y ou can delete unnecessa ry play lists . 1 Set the pow er s witch to . 2 Set the MODE s witch to . 3 Press MENU . The menu screen appears. 4 Press / to sele ct [PLA Y LIST], then press 49 .
46 EN MANA GING FILES MasterP age: Body_Left This camera is compatib le with DPOF (Digit al Print Order Format). Y ou can se t which images to be printed and the numbe r of prints with th is camera. Thi s f eature is useful to p rint with a DPOF-compat ible printer or bring a recording medium to photo lab f or print.
MANA GING FILES EN 47 ADVANCED OPERA TIONS MasterP age: Menu_Right If yo ur printer is co mpatibl e with Pict Bridge, stil l images can b e printe d easily by connecti ng the camera with t he USB cab le directly to the print er . DPO F setting can als o be used.
48 EN MasterP age: Heading0_Left MENU SETTINGS Y ou can change the menu sett ings to cus tomize your camera. Access the des ired menu screen by f ollowing the step s below , then ch ange the various se ttings . 1 Select the op eration mode. For Recording Me nus: Set the po wer sw itch to .
MENU SETTINGS EN 49 MENU SETTING S MasterP age: Menu_Right OFF : Makes the camera n ot to receive the si gnal from the remote control. [ON] : Enable s the oper ation with the r emote control. OFF : Disables the funct ion. [ON] : T urns off the pow er automatically to prev en t HDD damage when th e camera is accidental ly dropped.
50 EN MENU SETTINGS MasterP age: Body_Left [ ] = F actor y-pr eset Select the desired pic ture quality . [OFF] : Disab les the function. 16:9 WID E : For playbac k on TVs w ith an aspec t ratio of 16: 9. Natural ly e xpands the image to fit the screen without distor tion.
MENU SETTINGS EN 51 MENU SETTING S MasterP age: Menu_Right [ ] = F actory-preset [FINE] / ST ANDARD Select the de sired image qu ality . [1152 x 864] / 1 024 x 768 / 640 x 480 Select the de sired image si ze. * Not av ailable f or GZ-MG30E/EK/GZ-MG20 E/EK.
52 EN MasterP age: Heading0_Left REFERENCES Power No power is supplied. ● The power is no t connected properly . H Connect the A C adapter securely . ( 墌 pg. 14) ● The battery pack is not attached firmly . H Detach the battery pack once again and re-attach it firmly .
REFERENCES EN 53 REFERENCES MasterP age: Menu_Right The recorded image is whi te ● Shutter speed is set to NIGHTSCOPE or slow speed. H NIGHTSCOPE and slow speed are on ly for use in dark conditions. ( 墌 pg. 35) Playback Playbac k cannot be performed.
54 EN REFERENCES MasterP age: Body_Left Other problems The po wer/ch arge lamp on the camera does not light during charging. ● Charging is difficult in places subject to e xtremely high/low temp eratures . H T o protect the battery , it is recommended to charge it in places with a tempera ture of 10°C to 35°C.
REFERENCES EN 55 REFERENCES MasterP age: Menu_Right The following indications appear on the scre en. (Battery in dicator) Displays the batter y rema ining power . Remaining po wer le vel ● As the battery power comes close to nil, the battery indicator blinks .
56 EN REFERENCES MasterP age: Body_Left NO VIDEO MANA GEMENT FILE VIDEO FILES HA VE BEEN MOVED T O MPEG FOLDER The data cann ot be recorde d properl y , or the video manageme nt file is de leted or no t fo und. Video files ha ve been mov ed to MPEG (EXTMOV) f o lder .
REFERENCES EN 57 REFERENCES MasterP age: Menu_Right Bef ore cleani ng, turn off the camer a and remov e the battery pack an d AC adapter . T o clean the exterior Wipe gently wit h a soft cloth. Pu t the cloth in diluted mild so ap and wring it we ll to wipe off heavy dir t.
58 EN REFERENCES MasterP age: Body_Left ● T o prevent damage and prolong service life ... do not subject to unnecessary shock. ... charge in an environment where temperatures are within the toleranc es shown in the chart below .
REFERENCES EN 59 REFERENCES MasterP age: Menu_Right Main Unit ● For safety , DO NOT ... open the camera’ s chassis. ... disassemble or modify the unit. ... shor t-circuit the terminals of the battery pack. K eep it aw ay from metallic objects when not in use.
60 EN REFERENCES MasterP age: Body_Left Camera Po we r supply DC 11 V (Using AC adapter) DC 7.2 V (Usi ng batter y pack) Po we r consumption Appro x. 4.5 (4.8)* W * When using the LED light Dimensions (W x H x D) 67 mm x 70 mm x 109 mm Wei g h t Appro x.
REFERENCES EN 61 REFERENCES MasterP age: Menu_Right Format SD-VIDEO Recording/Playback f orm at Video: MPEG-2 Au dio: Dol by Di gital (2 ch) Signal format P AL standa rd Recording mode (video) UL TRA FINE: 720 x 576 pi xel s, 8.5 Mbps (CBR) FINE: 720 x 576 pix els, 5.
62 EN REFERENCES MasterP age: Body_Left Recording Time and Number of Images The tab les below sho w the appro ximate recordin g time and number of storable imag es. The number incre ases or decrea ses depending on the condi tions such as image size and/or picture qu ality .
REFERENCES EN 63 REFERENCES MasterP age: Menu_Right : Approximate number of storable i mages (for still image) ● Built-i n hard disk * For GZ-MG50E/EK/GZ-MG4 0E/EK only .
© 2005 Victor Company of J apan, Limited EK Printed in Malaysia 0805FOH-AL-VM EN MasterP age: Reference_Heading0_Right A AC Adapter ................... .............. .................. .... 16 B Backlight Compensation ............... .............. .
SOFTW ARE INST ALLA TION AND USB CONNECTION GUIDE ENGLISH L YT1473-001A EN M5E3_InstallGuide.book Page 1 Wed nesday, July 6, 2005 11 :53 AM.
–2– MasterP age: Body . JVC SOFTWARE LICENSE AGR EEMENT .... 2 Notice for Users ................ .............. ................. 6 System Requiremen ts ........................ ............. 8 Software Installati on (Windows ® ) ....... ........
–3– MasterP age: Body 3 RESTRICTION ON THE PROGRAM (1) Y ou may not rev erse engine er , de compile, disassemble, revise or modify the Program, except to the extent that expressly per mitted by applicable law . (2) Y ou may not copy or use the Program, in whole or in par t, other tha n as expressly specified in th is Agreemen t.
–4– MasterP age: Body 7 EXPOR T CONTROL Y ou agree that Y ou will not ship, transf er or ex port the Progr am or und erlying inf or mation and technol ogy to any countries to whi ch Japa n and ot her rele vant cou ntries ha ve initiated an embargo on such go ods.
–5– MasterP age: Body Y ou can find the la test inf ormation (in English) on the provided software p rogram at our wo rld wide web se rver at http://w ww .jvc- victor .co.jp/english/global-e.html CAUTION: ● Operate this equipmen t according to the operating procedure s described in this manual.
–6– MasterP age: BodyAcross Use of this s oftwar e is authoriz ed according to the te rms of the softw are licens e. JVC When contacti ng the neares t JVC office or agency in your countr y ab out this sof tware (refer to the JVC Worldwide Ser vic e Network a t http://www.
–7– MasterP age: BodyAcross PIXELA Fo r technical inquiries, please contact the PIXELA User Support Center in your region. Please check the PIXEL A website f or latest information and downloading. http://www .pix ela.co .jp/oem/jvc/e/inde x.html Region Locatio n Phone # North America Los Angeles +1-213-341-0163 Europe U.
–8– MasterP age: BodyAcross Windows ® 8 Digital Photo Navig ator The f ollow ing requirem ents must be satisfied to conn ect a camera to a PC and to use Digital Pho to Navi gator.
–9– MasterP age: BodyAcross 8 CyberLink DVD Solution The f ollowing requirements must be s atisfied to use CyberLink D VD Solution. OS :W i n d o w s ® 2000 Professional SP4 [ 2000] (pre-i nstall.
–1 0 – MasterP age: BodyAcross Macintosh 8 Capty MPEG Edit EX The f ollowing requirements m ust be satisfied to use Capty MPEG Edit EX. ● The system r equirements inf ormation abo ve is not a gua rantee t hat the pro vided software will work on all pers onal computers mee ting those re quirements.
–1 1 – MasterP age: Body Follow the procedure descr ibed below to insta ll the software. From the [SETUP] screen in s tep 2 , you can install the f ollowing driver s or softw are. Before star t install ing, quit any other software you are using. ( Check that there are n o other applicati on icons on the status bar.
–1 2 – MasterP age: Body 5 Click [Ne xt]. [License Agree ment] screen a ppears. 6 Click [Y es]. [Customer Inf ormation] screen appe ars. 7 Confirm your information and clic k [ Next]. ● It is possible to chan ge the inf ormation. [Choose Desti nation Loca tion] scree n appears.
–1 3 – MasterP age: Body NOTES: ● If P owerDirector/P owerProd ucer/P owerD VD hav e already been installed on the PC , uninstall them befor e installing the pro vided software . Video files captured with this camer a can only be handled on the pro vided softwar e.
–1 4 – MasterP age: Body 1 If you want to view the contents in the SD Memory Card, mak e sure that the card is set in the camera. 2 Set the ca mera’ s power s witch to the playbac k mode while pressing down the lock button located o n the switch.
–1 5 – MasterP age: Body Folder structur e within the recording medium Video files : Stored i n the [PRGxxx] folder (where xxx is a numb er), within the [SD_VIDEO] fo lder . Still image fil es : Stored in the [x xxJVCSO] folder (where xxx is a number), with in the [DCIM] folder .
–1 6 – MasterP age: Body Still images an d video file s that are store d in a recording me dium can be copied t o the PC and play ed back on t he PC. 1 Perf or m the procedure in “Viewing the Contents of a Recor ding Medium (Windo ws ® )” ( pg.
–1 7 – MasterP age: Body Still images Use an applica tion that ca n handle the JP EG file for m at . T o view a still imag e, dou ble-cl ick the still imag e file (extension “.jpg”). Video files Use the Po werD VD 5 NE. Y ou can install this softwa re from the pro vided CD-ROM.
–1 8 – MasterP age: Body 4 Click [OK]. Windows ® 2000: If a mess age indicatin g that the device can be safely removed appears, click [OK] and then cli ck [Close]. 5 Disconnect the USB cable. 6 Set the camera ’ s power switch to off. The camera tur ns off.
–1 9 – MasterP age: Body 8 Digital Photo Navig ator The User’s Guide is included on the C D-ROM in PDF f ormat. Right-click the CD-R OM icon in [My Computer], th en click [Open]. Doub le-click the [Docs] f older , then doub le-click the [Photo Navi] fo lder .
–2 0 – MasterP age: Body 5 Copy the enti re [SD_VIDEO] fo lder . When retur ning folders backed up to the PC back to the camer a, be sure to first er ase the [SD_VIDEO] folder in the camera HDD befo re cop ying the [SD_V IDEO] f older of the PC.
–2 1 – MasterP age: Body 1 Start P owerDirector Express N E and c lick [Load a media folder] of the imp ort button, then select t he folder that you have copied to PC to register it to the library . 2 Drag and drop the videos from the library to the timeline/storyboar d in the playbac k order .
–2 2 – MasterP age: Body 4 Select [DVD Format] and clic k [Next]. ● If the video is [UL TRA FINE], [FINE], o r [NORMAL], sele ct [High Qualit y NTSC (or P AL) D VD].
–2 3 – MasterP age: Body 8 Remove the check mark for [Include Menu] in the [Preview] scre en, and then click [ ] ]. 9 Inser t a check mark for [Burn to disc] in the [Final Output] scre en, and then c lick [] to create the DVD-Video.
–2 4 – MasterP age: Body 3 Drag and drop the videos from the library to the timeline/storyboar d in the playbac k order . ● If necessary , edit transitio n or title on the timeline/storyboard. Cl ick [Produ ce] after finish editing. ● Video in 4:3 asp ect ratio an d 16:9 aspect ratio cannot be e dited toge ther .
–2 5 – MasterP age: Body 6 Click [Star t]. This starts conv ersion of the edited file. The file is sav ed to the location displa yed in the stor age location. Before creating s lideshows or ti tles on a D VD that include s video in 16:9 aspect r atio, stil l images must fi rst undergo t he squeeze proces s.
–2 6 – MasterP age: Body Follow the procedure descr ibed below to insta ll the softw are. Before star t install ing, quit any other software you are using. Capty MPEG Edit EX This applica tion is used to edit vide o files (MPEG-2 f ormat) and write them into Quic kTime and a variety of forma ts.
–2 7 – MasterP age: Body 8 Click [Agree] if you agree with the license agree men t. Select a Dest ination scr een appears. 9 Select the desit ination v olume and clic k [Continue]. Installat ion T ype scr een appear s. 10 Click [Upgrade] if you perform a basic installation of the so ftware.
–2 8 – MasterP age: Body Connect the USB cable to copy still images and video files i n a recording me dium to the PC. 1 T o assure safety , mak e sure all un its are turned off before making any connections. 2 Use the USB cable to conne ct the camera to the PC.
–2 9 – MasterP age: Body 4 Double-c lick the memory car d icon on the desktop. The folders in the reco rding medium ap pear . Diffe rent file ty pes are sto red in diff erent f olders . [DCIM] : Contains folders with still image s (extension “.jpg”) [SD_VIDEO] : Contains f olders with video (MPEG2) fil es (extension “.
–3 0 – MasterP age: Body Still images an d video files t hat are store d in recording me dium can be copied t o the PC and play ed back on t he PC. 1 Double-c lick the recor ding medium icon on the deskto p. The folders in the reco rding medium appear.
–3 1 – MasterP age: Body This manual only re f ers to softwa re installatio n and PC connecti on. For more details of the software , refer to its Help/Readme . 8 Capty MPEG Edit EX 1 Open the [Capty MPEG Edi t EX for Ever io] folder in t he [Applications] f older .
–3 2 – MasterP age: Body Step2 T o combine two or more files, they need to first be linked in File Combination Mode . If the files will n ot be combined, proceed to Step 6. T o s witch to File Combin ation Mode , from the Capty MPEG Edit EX menu, 1 Click [Vie w].
–3 3 – MasterP age: Body Step4 Select the file format. Norma lly , select MPEG (system stre am) format. See Help for other file form ats. 1 Select the fi le fo rmat, and c lick [Execut e]. 2 Enter the file na me to be save d to [Save As]. 3 Select the st orage locati on under Where.
–3 4 – MasterP age: Body Step7 Editing 1 The point se lected first in the tr imming range is display ed in the GOP list or frame list. T o edit in fram e units, insert a chec k mark to display the frame in the frame list. ● Note that the scroll f unction will become slo wer.
–3 5 – MasterP age: Body Step9 Creati ng D VDs PIXELA’s “CaptyD VD/VCD V er. 2” is recommended f or creating D VDs. F rom CaptyD VD/VCD V er. 2, ● There is no image quality degr adation due to editing. ● Wide-screen video is supported. ● Video files in th e Ev erio hard disk can be used without co nv ersion.
© 2005 Victor Company of J apan, Limited M5E3 Printed in Japan 0605FOH-AL-VP EN SOFTW ARE INST ALLA TION AND USB CONNECTION GUIDE M5E3_InstallGuide.book Page 37 Wednesday, July 6, 20 05 11:53 AM.
L YT1468-004A 0705FOH-AL-VP (M5E3) © 2005 Victor Company of Japan, Limited Read this first! – How to handle the Hard Disk Camcorder – ENGLISH Please read this together with the instr uction manual before using the camera. 8 Make a bac kup of important recorde d data Protect your impor tant recorded data by copying the files to PC.
An important point after buying a device JVC GZ-MG50EK (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC GZ-MG50EK yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC GZ-MG50EK - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC GZ-MG50EK you will learn all the available features of the product, as well as information on its operation. The information that you get JVC GZ-MG50EK will certainly help you make a decision on the purchase.
If you already are a holder of JVC GZ-MG50EK, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC GZ-MG50EK.
However, one of the most important roles played by the user manual is to help in solving problems with JVC GZ-MG50EK. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC GZ-MG50EK along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
