Instruction/ maintenance manual of the product MST-431 AMX
Go to page of 36
Operation/Reference Guide Touch Panels MST-431/MSD-431-L 4.3” Modero S Series® Tabletop Touch Panel 4.3" Modero S Series® Wall Mount Touch Panel Initial Release: 7/26/2013.
AMX Limited Warranty and Disclaimer This Limited W arranty and Disclaimer extends only to products purchased directly from AMX or an AMX Authorized Partn er which include AMX Dealers, Distributors, VIP’s or other AMX authorized entity .
AMX Software License and Warranty Agreement • LICENSE GRANT . AMX grants to Licensee the non-exclusive right to use the AMX Software in the manner described in this License. The AMX Software is licensed, no t sold. This license does not grant Licensee the right to create derivative wor ks of t he AMX Software.
.
Table of Contents 1 MST-431/MSD-431-L 4.3" Modero S Series® Touch Panels Table of Contents Introduction ................ ....................................................................... ................. 1 Features .......................
2 MST-431/MSD-431-L 4.3" Modero S Series® Touch Pane ls Table of Contents Downloading fi rmware .............. ............. ................ ............. ............. ................ ............. 25 Appendix: Troubleshooting .......... ....
Introduction 1 MST-431/MSD-431-L 4.3" Modero S Series® Touch Pan els Introduction The Modero S Series ® line of touch panels is a c ousin to the popular Modero X Se ries, with features optimized for specific needs.
MST-431 2 MST-431/MSD-431-L 4.3" Modero S Series® Touch Panels MST-431 The Modero S Series is a touch pane l f amily sophisticated enough for room contro l yet priced right for the most cost sensitiv e installations including small huddle spaces and dedicated room sc heduling applications.
MST-431 3 MST-431/MSD-431-L 4.3" Modero S Series® Touch Pan els FIG . 2 MST-431 side view MST-431 Specifications Power Requirements: PoE (Power over Ethernet), 802.3af, class 2 Power Consumption: • Full-On: 4W • S tandby: 2W • Shutdown: 0.
MST-431 4 MST-431/MSD-431-L 4.3" Modero S Series® Touch Panels MST-431 Specific ations (Cont.) Communications: Ethernet: Ethernet: 10/100 port, RJ-45 connecto r . Supported IP and IP-based protocols: UCP , TCP , ICMP , ICSP , IGMP , DHCP , T elnet, FTP , DN S, RFB (for VNC), HTTP USB: (1) USB host 2.
MST-431 5 MST-431/MSD-431-L 4.3" Modero S Series® Touch Pan els Connector Locations W ith the unit facing you, the single USB port for peripherals is located on the rear right side of the device (FIG. 3). The RJ45 connector for PoE is al so located on the back of the device.
MSD-431-L 6 MST-431/MSD-431-L 4.3" Modero S Series® Touch Panels MSD-431-L The MSD-431-L 4.3" Landscape W all Mount T ouch Panel ( FG2265-03 ) has a sleek style to complement the Modero X Series touch pane ls, with a new ele gant room av ailability indicator bar and gl ass mounting option.
MSD-431-L 7 MST-431/MSD-431-L 4.3" Modero S Series® Touch Pan els MSD-431-L Specifications Power Requirements: PoE (Power over Ethernet), 802.3af, class 3 Power Consumption: • Full-On: 4W maximum • St andby: 2W • Shutdown: 0.
MSD-431-L 8 MST-431/MSD-431-L 4.3" Modero S Series® Touch Panels Memory The MSD-431-L comes with 512 MB of SDRAM and 4 GB of Flash memory , neither of which can be upgraded.
MST-431/MSD-431-L Features 9 MST-431/MSD-431-L 4.3" Modero S Series® Touch Pan els MST-431/MSD-431-L Features Picture View By connecting a USB dri ve via one of the de vice’ s USB ports (FIG. 3), Picture V iew allo ws the MST -431 to access JPEG images on that dri ve an d display them on the touchscreen (FIG.
MST-431/MSD-431-L Features 10 MST-431/MSD-431-L 4.3" Modero S Series® Touch Panels The Pause/R esu me button allows the display to stop on one particular im age. Press it a gain to resume the display pr ocession. The Next Image Sa ved button re turns the d isplay to the la st image uploaded by Page V iew .
MST-431/MSD-431-L Features 11 MST-431/MSD-431-L 4.3" Modero S Series® Touch Pan els Configuration The MST -431 and MSD-431-L are equipped with Settings Pages that allo w you to set and configure v arious features on the panels.
MST-431/MSD-431-L Features 12 MST-431/MSD-431-L 4.3" Modero S Series® Touch Panels.
Installation 13 MST-431/MSD-431-L 4.3" Modero S Series® Touch Pan els Installation MST-431 Installation Any USB peripherals (mouse, ke yboard, etc.) may be connected to th e USB port on the rear of the device (FIG. 8). Updates to the device’ s firm wa re are also made via the USB port.
Installation 14 MST-431/MSD-431-L 4.3" Modero S Series® Touch Panels MSD-431-L Installation The MSD-431-L may be installed directly into a solid su rface en vironment, using either solid surface scre ws or the included locking tabs f or dif ferent mounting options.
Installation 15 MST-431/MSD-431-L 4.3" Modero S Series® Touch Pan els T o install the back box: 1. Prepare the area by removing any scre ws or nails from the drywall before beginn ing the cutout process. 2. For best resu lts, use the MSD- 431-L Installation T emplate ( 68-2265-01 ) to ensure proper placem ent (FIG.
Installation 16 MST-431/MSD-431-L 4.3" Modero S Series® Touch Panels 3. After ensuring proper placement, cut out the mounti ng surface for the back box, using the MSD-431-L Installation T empla te as a guide. 4. Thread the incoming Ethernetfrom their terminal locations through the surface opening (FIG.
Installation 17 MST-431/MSD-431-L 4.3" Modero S Series® Touch Pan els 10. T est the incoming wiring by attaching the panel conne ctions to their terminal locations and applying power . V erify that the panel is rece iv ing po wer a nd functioning properly to pre vent repetition of the installat ion.
Installation 18 MST-431/MSD-431-L 4.3" Modero S Series® Touch Panels 12. Reconnect the terminal Ethernet and USB to the ir re specti ve locations on either the Ethernet port or NetLinx Master . Uninstalling the MSD-431-L The MSD-431-L is held in place to the back box via la tch hooks and clips on the back box (FIG.
Configuration and Programming 19 MST-431/MSD-431-L 4.3" Modero S Series® Touch Pan els Configuration and Programming Modero S Series Programming Guide Information on Settings pages, panel configur ation, a nd programming is included in the Mo der o S Series Pr ogramming Guide , av ailable at www .
Configuration and Programming 20 MST-431/MSD-431-L 4.3" Modero S Series® Touch Panels.
Upgrading Firmware 21 MST-431/MSD-431-L 4.3" Modero S Series® Touch Pan els Upgrading Firmware Upgrading Firmware via USB stick Firmware and TPDesign 4 fi le downlo ads may be made via USB stick. When looking at the device from the front, the MST -431 has one USB port on the rear right of the device (FIG.
Upgrading Firmware 22 MST-431/MSD-431-L 4.3" Modero S Series® Touch Panels Upgrading from Previous Firmware The MST -431 and MSD-431-L allo w the option to rev ert th e de vice to the pre vious f irmware ru n before an upgrade. T o upgrade the device fro m pre viously loaded fi rmware: 1.
Upgrading Firmware 23 MST-431/MSD-431-L 4.3" Modero S Series® Touch Pan els Upgrading Firmware Via NetLinx Studio The MST -431 and MSD-431-L use an Ethernet connect ion for programming, firm w are updates, and touch panel file transfer via NetLinx Stu dio.
Upgrading Firmware 24 MST-431/MSD-431-L 4.3" Modero S Series® Touch Panels 4. Click on the NetLinx Master radio b utton from the Platform Selection section. 5. Click on the V irtual Maste r radio box from the T ransport Connection Option section to configu re the PC to communicate directly wi th a panel.
Upgrading Firmware 25 MST-431/MSD-431-L 4.3" Modero S Series® Touch Pan els Downloadin g firmware 1. If the panel f irmware v ersion is not the latest a v ailable; locate the latest firm ware f ile from www .
Upgrading Firmware 26 MST-431/MSD-431-L 4.3" Modero S Series® Touch Panels 7. Click the Reboot Device checkbox if it is not already check ed. This causes the touch panel to reboot after the firmwa re update pr ocess is complete. 8. Click Send to begin the transfer .
Appendix: Troubleshooting 27 MST-431/MSD-431-L 4.3" Modero S Series® Touch Pan els Appendix: Troubleshooting Overview This section describes the solutions to possible hardware/firmware issues that could arise during the common operation of a Modero S touch panel.
Appendix: Troubleshooting 28 MST-431/MSD-431-L 4.3" Modero S Series® Touch Panels.
Appendix - Troubleshooting 29 MST-431/MSD-431-L 4.3" Modero S Series® Touch Pane ls.
7/2013 © 2012 AMX. All rights reserved. AMX a nd the AMX logo are registered trademarks of AMX. AMX reserves the right to alter specifica tions without notice at any time. It’s Your World - Take Con trol™ 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 USA • 800.
An important point after buying a device AMX MST-431 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AMX MST-431 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AMX MST-431 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AMX MST-431 you will learn all the available features of the product, as well as information on its operation. The information that you get AMX MST-431 will certainly help you make a decision on the purchase.
If you already are a holder of AMX MST-431, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AMX MST-431.
However, one of the most important roles played by the user manual is to help in solving problems with AMX MST-431. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AMX MST-431 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
