Instruction/ maintenance manual of the product GR-SXM920 JVC
Go to page of 76
INSTRUCTIONS LYT0467-001A EN C O M P A C T V H S C A M C O R D E R G R - S X M 9 2 0 For Customer Use: Enter below the Model No. and Serial No. which is located on the bottom of cabinet. Retain this information for future reference. Model No. Serial No.
2 EN Using This Instruction Manual • All major sections and subsections are listed in the T able Of Contents on the cover . • Notes appear after most subsections. Be sure to read these as well. • Basic and advanced features/operation are separated for easier reference.
EN 3 When the equipment is installed in a cabinet or on a shelf, make sure that is has sufficient space on all sides to allow for ventilation (10 cm (3-15/16") or more on both sides, on top and at the rear). Do not block the ventilation holes. (If the ventilation holes are blocked by a newspaper , or cloth etc.
4 EN 5. V entilation Slots and openings in the cabinet are provided for ventilation. T o ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. • Do not block the openings by placing the product on a bed, sofa, rug or other similar surface.
EN 5 USE 1. Accessories T o avoid personal injury: • Do not place this product on an unstable cart, stand, tripod, bracket or table. It may fall, causing serious injury to a child or adult, and serious damage to the product. • Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product.
6 EN A B 4 2 3 1 4 3 1 2 Using the battery pack Hook its end to the camcorder and push the battery pack in until it locks in place . (Charging procedure, Z pg. 10) T o remove the battery pack Slide BA TTERY RELEASE and pull out the battery pack. QUICK OPERA TION GUIDE (VIDEO) 1 Set the System Select Switch to “VIDEO”.
EN 7 QUICK OPERA TION GUIDE (D.S.C.) A B 2 1 3 3 1 2 4 Using the battery pack Hook its end to the camcorder and push the battery pack in until it locks in place . (Charging procedure, Z pg. 10) T o remove the battery pack Slide BA TTERY RELEASE and pull out the battery pack.
8 EN MAJOR FEA TURES Cassettes marked and can be used with this camcorder . Integrated Auto Light ( Z pg. 27) Pr ogram AE with Special Effects ( Z pg. 29) n Electronic Fog Filter n ND Effect n Sepia n T wilight n Sports n Nega/Posi n 1/2000 sec. High Speed Shutter Super VHS-ET ( Z pg.
EN 9 PROVIDED ACCESSORIES • AC Power Adapter/Charger AA-V16U • Cassette Adapter (VHS Playpak) C-P7U • Shoulder Strap • Battery Pack BN-V1 1U • DC Cord • Lithium Battery CR2025 (for clock o.
10 EN GETTING ST ARTED Power This camcorder’s 3-way power supply system lets you choose the most appropriate source of power . Do not use provided power supply units with other equipment. CHARGING THE BA TTERY P ACK 1 Make sure you unplug the camcorder ’ s DC cord from the AC Power Adapter/Charger .
EN 11 A B A TTENTION: Before detaching the power source, make sure that the camcorder ’ s power is turned off. Failure to do so can result in a camcorder malfunction. USING THE BA TTERY P ACK Hook its end to the camcorder and push the battery pack in until it locks in place .
12 EN Clock (Lithium) Battery Insertion/Removal This battery is necessary for clock operation and to perform date/time settings. 1 Switch off the unit’ s power and remove the power supply unit (battery pack, AC Power Adapter/Battery Charger , etc.).
EN 13 4 R I T D J D 4 B E N I A L E R A C T T T I M E C . L E P O T K T E / U I T T I M R M I L I D O N E M A M D E N E N E G O . . O O E 0 O F F N 6 F F F G F LIS H Y M D T E E O A I X A N Y M I R T E T H DA T E / T I M P E M 2 8 0 J : 0 U 2 2 0 N 8 0 4 R I T D J D 4 B E N I A L E R A C T T T I M E C .
14 EN Recording Mode Setting Set depending on your preference. 1 Set the System Select Switch to “VIDEO”, then set the Power Switch to “AUT O” or “PRO.
EN 15 4 D T S T P S 4 N . E – A I N R E Z L V P C A E X O E H E T P T T O S U S U M M L R H R A E E E O N C T N T R G O TH O O O T S F N F F 3 T U F F 0 A L N L DARD O O E N F X F IT S – VHS E T T.
16 EN Recording Playback NOTES about S-VHS and S-VHS ET n JVC EHG (Extra High Grade) tapes are recommended for superior results. Use S-VHS tape for storing recordings for an extended period or for recording important scenes, as it enables higher-quality recording and playback.
EN 17 1 3 3 2 2 180 ° 180 ° 2 3 1 4 PAUSE Power Zoom Lever Recording Start/Stop Button Set to “CAMERA” (“AUTO” or “PRO.”). Grip Adjustment 1 Separate the V elcro strip.
18 EN 180 ° 90 ° BR I G H T – ––––– 6 ––––– + 25 MI N 120MIN 3MIN 2MIN MIN 119MIN 1MIN 0MIN NOTE: Y ou should already have performed the procedures listed below . If not, do so before continuing. ● Power ( Z pg. 10) ● Recording Mode Setting ( Z pg.
EN 19 NOTES: ● When the Power Switch is set to CAMERA and the LCD monitor is opened at an angle of 60 degrees or more, the LCD monitor switches on and the viewfinder switches off automatically to save power . ● The cassette holder cannot be opened unless a power supply is attached.
20 EN F P M M E U I U U X L N L L I L – T T T U I I P – – S 4 9 NAP S HOT T T P S 4 E A I N R L P C A E E E T P T U S U M L R H R A E E O N C N T R G O TH O T S P F 3 T I F 0 A N N – D U A P R.
EN 21 NOTES: ● The remaining number of shots varies according to the selected Picture Mode. In the “ST ANDARD” mode, twice as many still images can be shot as in the “FINE” mode. ● Some sample images have been stored in the built-in memory at the factory .
22 EN BASIC D.S.C. SHOOTING T T P S 4 E A I N R L P C A E E E T P T U S U M L R H R A E E O N C N T R G O TH O T S F F 3 T U F 0 A L N L DARD F S E I T X N A I E N T DA P R I D CTU RE T T P S 4 E A I .
EN 23 Snapshot This interesting feature lets you record two types of digital still images that look like photographs onto a tape, as well as keeping them in the camcorder ’ s built-in memory . It is a great way to spice up footage of events such as parties, weddings and graduations.
24 EN RECORDING Basic Features (cont.) SNAPSHOT RECORDING 1 Press SNAPSHOT . • Regardless of the Power Switch position (“AUTO” or “PRO.”), Snapshot recording takes place using the selected Snapshot mode. • A still image is recorded onto the tape and into the camcorder’s built-in memory .
EN 25 1X Zoom in (T : Telephoto) Zoom out (W: Wide angle) Power Zoom Lever Zoom indicator bar FEA TURE: Zooming PURPOSE: T o produce the zoom in/out effect, or an instantaneous change in image magnification. Digital circuitry extends the maximum magnification offered by optical zoom.
26 EN RECORDING Basic Features (cont.) FEA TURE: Quick Review (for scenes recorded onto a tape) PURPOSE: T o check the end of the last recording. OPERA TION: 1) Set the System Select Switch to “VIDEO”, then set the Power Switch to “CAMERA” (“AUT O” or “PRO.
EN 27 DANGER n The video light can become extremely hot. Do not touch it either while in operation or soon after turning it off, otherwise serious injury may result. n Do not place the camcorder into the carrying case immediately after using the video light, since it remains extremely hot for some time.
28 EN Fade/Wipe Effects These effects let you make pro-style scene transitions. Fade- or wipe-in works at recording start, and fade- or wipe-out works at recording end or when you enter Record–Standby mode. 1 Set the System Select Switch to “VIDEO”, and set the Power Switch to “PRO.
EN 29 Program AE With Special Effects 1 Set the System Select Switch to “D.S.C.” or “VIDEO”, and set the Power Switch to “PRO.”. 2 Press P .AE repeatedly until the desired mode’ s name and indication appear . They are displayed for approx.
30 EN Using Menus For Detailed Adjustment This camcorder is equipped with an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings. 1 The operation system depends on the function you wish to select. Set the System Select Switch to “VIDEO” or “D.
EN 31 * Activated only with the System Select Switch set to “VIDEO”. If the System Select Switch is set to “D.S.C.”, this function will not be activated although the highlight bar will move on the Menu Screen like the setting procedure. Functions listed without an asterisk are available with the System Select Switch set to either “D.
32 EN RECORDING Advanced Features (cont.) Menu Screen A vailable Using The MENU Button (cont.) : Factory-preset * Activated only with the System Select Switch set to “VIDEO”. If the System Select Switch is set to “D.S.C.”, this function will not be activated although the highlight bar will move on the Menu Screen like the setting procedure.
EN 33 D E C 25. 99 DEC 25. 99 AM 10 : 25 : 00 AM 10 : 25 : 00 DEC 25. 99 (DATE) (TIME) (DATE&TIME) AUTO DATE No indication (OFF) 1 Set the System Select Switch to “VIDEO”, and set the Power Switch to “PRO.”. 2 Press the Select Wheel to display the Menu Screen.
34 EN RECORDING Advanced Features (cont.) REC TIME indication on the normal screen Animation Y ou can give stationary scenes or objects an illusion of movement. This function allows you to shoot a series of pictures, each slightly different, of the same object for a brief period of time.
EN 35 T ime-Lapse Y ou can record sequentially at preset time spans. Leaving the camcorder aimed at a specific subject, you can record subtle changes over an extended period of time. NOTES: Before performing the following steps, make sure that: ● The System Select Switch is set to “VIDEO”.
36 EN Exposure Control This feature automatically adjusts the iris for the best available picture quality , but you can override it and make the adjustment manually . Manual exposure adjustment is recommended in the following situations: • When shooting using reverse lighting or when the background is too bright.
EN 37 Focus detection zone Focusing AUTO FOCUS The camcorder ’ s Full Range AF system offers continuous shooting ability from close-up to infinity . However , correct focus may not be obtainable in the situations listed below (in these cases use manual focusing): • When two subjects overlap in the same scene.
38 EN Power Switch White Balance Adjustment A term that refers to the correctness of color reproduction under various lighting. If the white balance is correct, all other colors will be accurately reproduced. The white balance is usually adjusted automatically .
EN 39 1 Load a tape ( Z pg. 12). 2 Set the System Select Switch to “VIDEO”, then set the Power Switch to “PLA Y”. T o start playback, press 4 / 6 . • T o stop playback, press 5 . • Press 2 to rewind, or 3 to fast-forward the tape during Stop mode.
40 EN Set to “PLA Y”. Set to “VIDEO”. P .AE Button EFFECT Button P .ST ABILIZER Button T racking: Eliminates noise bars that appear on-screen during playback. Factory-preset is Auto T racking. T o activate Manual T racking: 1) Press P .AE and EFFECT simultaneously .
EN 41 VIDEO PLA YBACK Using The Cassette Adapter Compact video cassette VCR Reels Compartment door Recording safety hole Sliding latch Cassette Adapter (VHS Playpak) Use this to play back an S-VHS-C/VHS-C video cassette recorded with this camcorder on a VHS VCR.
42 EN BASIC CONNECTIONS These are some basic types of connections. When making connections, refer also to your VCR and TV instruction manuals. Audio cable (optional) T o Audio Output TV VCR (Recording deck) Connector cover* T o TV or VCR T o AUDIO IN * When connecting the cables, open this cover .
EN 43 Basic Connections 1 Make sure all units are turned off. 2 Connect the camcorder to a TV or VCR as shown in the illustration ( Z pg. 42). If using a VCR . . . go to step 3 . If not . . . go to step 4 . 3 Connect the VCR output to the TV input, referring to your VCR’ s instruction manual.
44 EN D.S.C. PLA YBACK Basic Playback Still images shot using this camcoder are automatically numbered, then stored in numerical order in the built-in memory . Y ou can view the still images stored in memory , one at a time, much like flipping through a photo album.
EN 45 Connection T o A Windows ® PC Image data stored in the camcorder ’ s built-in memory can be transferred to a W indows ® PC and saved using the provided image transfer software, Picture Navigator . The image data transferred to a Windows ® PC can also be further processed using Mr .
46 EN D.S.C. PLA YBACK Advanced Features I S P D 4 N L R E R D I O L E E D T E T X E E T U C E R S T N HO W I S P D 4 N L R E R D I O L E E D T E T X E E T U C E R S T N HO W 0 1 0 4 0 3 0 6 0 2 0 5 &.
EN 47 Mode Effect INDEX All still images stored in memory can be displayed six at a time. This mode is a convenient way to look for the still image you want to view and to check the still images you shot beforehand ( Z pg. 48). SLIDE SHOW After doing steps 1 through 4 on pg.
48 EN D.S.C. PLA YBACK Advanced Features (cont.) 0 1 0 4 0 3 0 6 0 2 0 5 EXIT < INDEX > Index Y ou can view all still images stored in memory six at a time. Use this mode when looking for a still image you want to view and when checking the still images you shot beforehand.
EN 49 0 1 0 4 0 3 0 6 0 2 0 5 < PROTECT > EXIT 01 04 03 06 02 05 < PROTECT > EXIT A padlock mark appears. PROTECT Menu Power Switch MENU Button Select Wheel System Select Switch Display Protect This mode helps prevent accidental erasure of images.
50 EN 0 1 0 4 0 3 0 6 0 2 0 5 < DELETE > NEXT C E E A N X N T I C E T E R L D ELETE S A E E L X L L I E T CT D ELETE Delete Select Menu In case of “SELECT” DELETE Menu Delete Execute Menu In case of “ALL” Menu Screen Power Switch MENU Button Select Wheel System Select Switch Display D.
EN 51 0 1 0 4 0 3 0 6 0 2 0 5 < DELETE > NEXT 01 04 03 06 02 05 < INDEX > EXIT In case of “SELECT” If you check the remaining still images on INDEX Menu after deleting . . . 6 Rotate the Select Wheel to move the highlight bar to “CANCEL” or “ENTER”, then press it.
52 EN USING THE REMOTE CONTROL UNIT Installing The Batteries The remote control uses two ”AAA (R03)” size batteries. See “General Battery Precautions” ( Z pg. 65). 1 Open the battery compartment cover as illustrated. 2 Insert two ”AAA (R03)” size batteries in the correct direction.
EN 53 ZOOM (T/W) PLAY STOP Press T Normal playback RM-V715U (provided) Remote sensor Playback Zoom T o magnify the recorded image up to 10X at any time during playback. NOTES: ● Use the RM-V715U remote control unit to perform this procedure. ● Make sure that the TBC mode is activated ( Z pg.
54 EN USING THE REMOTE CONTROL UNIT (cont.) M – 0 : 05 : e 2 4 0 w M – 0 : 12 : 34 PLAY STOP INSERT REW START/STOP FF PAUSE A.DUB Insert editing indicator Display COUNTER R/M Button T ape Counter .
EN 55 NOTE: Use the RM-V715U remote control unit to perform the following procedures. Audio Dubbing Y ou can record a new soundtrack on a prerecorded tape (normal audio only). The sound is recorded from the built-in microphone. Perform steps 1, 2 and 3 of the Insert Editing (VIDEO) procedure ( Z pg.
56 EN USING THE REMOTE CONTROL UNIT (cont.) 1 1 M / I 2 N S START/STOP REC. TIME INT. TIME FEA TURE: Animation and Time-Lapse PURPOSE: The remote control lets you set/release Interval T ime and Recording T ime without using the Menu Screen. OPERA TION: Animation 1) Set Instead of performing steps 1 and 2 on pg.
EN 57 TROUBLESHOOTING If, after following the steps in the chart below , the problem still exists, please consult your JVC dealer . The camcorder is a microcomputer -controlled device. External noise and interference (from a TV , a radio, etc.) might prevent it from functioning properly .
58 EN TROUBLESHOOTING (cont.) SYMPTOM POSSIBLE CAUSE(S) RECORDING Recording cannot be performed. Recording does not start. Animation or Time-Lapse is not available. The tape is running, but there is no playback picture. Playback cannot be performed. Playback picture is blurred or interrupted.
EN 59 SYMPTOM POSSIBLE CAUSE(S) SHOOTING Although SNAPSHOT is pressed, a still image is not stored in the built-in memory . It is not possible to shoot in sucession. Although “ALL” is selected in the DELETE Menu Screen, all still images cannot be deleted.
60 EN INDEX Controls, Connectors And Indicators O P 1 p Q w o W r t e 2 E R 3 4 5 6 * ) ( i T Y I U y u 7 8 ! # % ^ 9 0 @ $ & q.
EN 61 Controls 1 Diopter Adjustment Control ................. Z pg. 17 2 Lens Cover Open/Close Ring ................ Z pg. 18 3 V ideo Light Switch [LIGHT OFF/AUT O/ON] ...................... Z pg. 27 4 Snapshot Button [SNAPSHOT] ....... Z pg. 20, 23 5 • Power Zoom Lever [T/W] .
62 EN INDEX Indications 1 R 4 B D 2 E 4 5 1 R E 0 C 4 M / I C M I 2 G C I E N S H O 2 N P T T N 5 W S G . I – – R 9 L V P A 9 I H A – T S G S U – U T H S – L A S D T R E – A M – E – T E 3 C 6 I 1 T 4 .
EN 63 W arning Indications Indications Function Displays the battery remaining power . Remaining power level: high. It does not necessarily mean that the battery pack is fully charged. Remaining power level: exhausted As the battery power comes close to nil, the battery indicator blinks (battery power warning).
64 EN USER MAINTENANCE After Use 1 T urn off the camcorder . 2 Open the LCD monitor fully . Slide EJECT to open the cassette holder , then remove the cassette. 3 Press PUSH to close and lock the cassette holder . 4 Close and lock the LCD monitor . 5 Slide BA TTERY RELEASE to remove the battery pack.
EN 65 When using the AC Power Adapter/Charger in areas other than the USA n The provided AC Power Adapter/Char ger features automatic voltage selection in the AC range from 1 10 V to 240 V .
66 EN CAUTIONS (cont.) Cassettes T o properly use and store your cassettes, be sure to read the following cautions: 1. During use . . . ... make sure the cassette bears the VHS-C mark. ... be aware that recording onto prerecorded tapes automatically erases the previously recorded video and audio signals.
EN 67 About moisture condensation . . . ● Y ou may have observed that pouring a cold liquid into a glass will cause drops of water to form on the glass’ outer surface.
68 EN TERMS A AC Power Adapter/Charger ...................... pg. 10, 1 1 Animation Recording .............................. pg. 34, 56 Audio Dubbing ............................................. pg. 55 Auto Date Record ...............................
EN 69 P Padlock Mark ................................................ pg. 49 Picture Mode Setting ..................................... pg. 22 Picture Stabilizer ........................................... pg. 25 Pin-Up Image .........................
70 EN V iewfinder : Electronic viewfinder with 0.55" color LCD White balance adjustment : Auto/Manual adjustment LCD monitor : 3" diagonally measured, LCD panel/TFT active matrix system Speaker : Monaural Connectors JLIP : ø3.
EN 71 ESP AÑOL A B Alimentación Esta cámara de video posee un sistema de alimentación de 3 vías que le permite seleccionar la fuente de alimentación más apropiada.
72 EN A B 4 2 3 1 4 3 1 2 Utilización de la batería Enganche el lado extremo de la batería en la cámara de video y empuje la batería hasta que se bloquee en el lugar . (Procedimiento para carga, Z p. 10) Para extraer la batería Deslice BA TTERY RELEASE y extraiga la batería.
EN 73 GUIA P ARA OPERACION RAPIDA (D.S.C.) A B 2 1 3 3 1 2 4 Utilización de la batería Enganche el lado extremo de la batería en la cámara de video y empuje la batería hasta que se bloquee en el lugar . (Procedimiento para carga, Z p. 10) Para extraer la batería Deslice BA TTERY RELEASE y extraiga la batería.
74 EN HOW TO LOCATE YOUR JVC SERVICE CENTER Dear customer: In order to receive the most satisfaction from your purchase, read the instruction booklet before operating the unit.
EN 75 W ARRANTY (Only in U.S.A.) LIMITED WARRANTY CONSUMER VIDEO 1-90 JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original retail purchase for the period as shown below.
COPYRIGHT© 2000 VICTOR COMPANY OF JAPAN, LTD. U Printed in Japan 1299MKV * UN * YP VICTOR COMP ANY OF JAPAN, LIMITED EN G R-SXM920.
An important point after buying a device JVC GR-SXM920 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC GR-SXM920 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC GR-SXM920 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC GR-SXM920 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC GR-SXM920 will certainly help you make a decision on the purchase.
If you already are a holder of JVC GR-SXM920, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC GR-SXM920.
However, one of the most important roles played by the user manual is to help in solving problems with JVC GR-SXM920. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC GR-SXM920 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
