Instruction/ maintenance manual of the product GR-DV4000 JVC
Go to page of 88
L YT1143-001B Master P age: Cover1 EN ENGLISH GR-D V5000 GR-D V4000 AU TO M AT I C DEMONSTRA TION 9 GETTING ST ARTED 10 VIDEO RECORDING & PLA YBA CK 17 DIGIT AL STILL CAMERA (D.
2 EN Master P age: Left-Safety-Dummy Using T his Instruction Manual ● All major sections are listed in the T able Of Contents on the cover page. ● Notes appear after most subsections . Be sure to read these as well. ● Basic and adv anced features/operation are separ ated for easier reference .
EN 3 Master P age: Right-Safety CAUTIONS: ● T his camcorder is designed to be used with P AL-ty pe colour television signals. It cannot be used for pla yback with a television of a d ifferent standard. However , live re cording and LCD monitor/viewfinder pla yback are possible an ywhere.
4 EN Master P age: Left-Safety SAFETY PRECAUTIONS Do not point the lens or the viewfinder direct ly into the sun. T his can cause eye injuries, as we ll as lead to the malfunctioning of internal circuitry . There is also a risk of fire or electric shoc k.
EN 5 Master P age: Right NOTES: ● In order to maintain optimum performance of the camc order , provided cables ma y be equipped with one or more core filter . If a cable has only one core filter , the en d that is closest to the filte r should be connected to the camcorder .
6 EN Master P age: Left How T o Attach/Detach The Lens Hood T he provided lens hood helps bloc k out glare when shooting under bright sunlight, the same wa y professional photographers do. To a t t a c h : Align the lens hood with the camcorder’ s lens while the index on the lens hood is facing upward, and then screw the ring clockwise a .
EN 7 Master P age: Right How T o Attach The Lens Cap T o protect the lens, attach the provided lens cap to the camcorder as shown in the illustration. Y ou can also attach the lens cap to the lens hood. NOTE: T o confirm the lens cap is on correctly make sure the cap is flush to the camcorder .
8 EN Master P age: Left-Heading0 CONTENTS AUTOMATIC DEMONSTRATION 9 GETTING STARTED 10 Power ........... ..................... ..................... ................. . 10 Grip Adjustment ................... ..................... ............... 12 Viewfinder Adju stment .
EN 9 Master P age: Right-start A UTOMA TIC DEMONSTRA TION Automatic Demonstr ation takes place when “DEMO MODE” is set to “ON” (factory-preset). 䡲 Automatic Demonstration starts w hen there is no operation for about 3 minutes after the P ower Switch is set to “ A ” or “ M ” and no cassette is in the camcorder .
Master P age: Left-start 10 EN GETTING ST ARTED T his camcorder’ s 2-way po wer supply system lets you c hoose the most appropriate source of power . Do not use provided power supply units with other equipment. Charging The Battery Pack 1 Make sure you unplug th e camcorder’ s DC cord from the AC P ower Adapter/Charger .
EN 11 Master P age: Right INFORMA TION: T he optional extended-use ba ttery pac k kit is a set composed of a battery pack and A C P ower Adapter/ Charger: VU-V840 KIT : B N-V840U battery pack & AA.
12 EN Master P age: Left 1 Adjust the velcro strip. 2 P ass your right hand through the loop and grasp the grip. 3 Adjust your thumb and fingers through the grip to easily operate the Recording Start/Stop Button, P ower Switc h and P ower Zoom Lev er .
EN 13 Master P age: Right 1 Set the P ower Switc h to “ M ” or “PLA Y” while pressing down the Lock Button located on the switch. 2 Open the LCD monitor fully , or pull out the viewfinder fully . 3 Press the MENU Wheel in. T he Menu Screen appears.
14 EN Master P age: Left T he date/time is recorded onto the tape at all times, but its display can be turned on or off during pla yback. ( 墌 pg. 31, 41) 1 Set the P ower Switc h to “ M ” while pressing down the Lock Button located on the switch.
EN 15 Master P age: Right T he camcorder needs to be powered up to load or eject a cassette. 1 Slide and hold OPEN/EJECT in the direction of the arrow , then pull the cassette holder cover open until it locks. T he cassette ho lder opens automatically .
16 EN Master P age: Left T he provide d memory card is alread y inserted in the camcorder at the time of purchase. 1 Make sure the camcor der’ s power is off. 2 Open the card cov er (MEMOR Y C ARD). 3 T o load a memory card , firmly insert it with its clipped edge first.
EN 17 Master P age: Right-start VIDEO RECORDING & PLA YB A CK VIDEO RECORDING NOTE: Before continuing, perfor m the procedures listed below: ● Pow e r ( 墌 pg. 1 0) ● Loading A Cassette ( 墌 pg. 15) 1 Remove the lens cap. 2 Press PUSH OPEN and open the LCD monitor fully , o r pull out the viewfinder fully .
18 EN Master P age: Left T ape Remaining T ime Approximate tape remain ing time appears on the displa y . “– h – – m” means the camcorder is calculating the remaining time. When the remaining time reaches 2 minutes, the indication starts blinking.
EN 19 Master P age: Right Ti m e C o d e During recording, a time code is recorded on the tape. T his code is to confirm the location of the recorded scene on the tape during playbac k. If recording starts from a blank portion, the time code begins counting from “00:00:00” (minute:second:frame).
20 EN Master P age: Left-Heading0 VIDEO PLA YBA CK 1 Load a cassette. ( 墌 pg. 15) 2 Set the VIDEO/MEMOR Y Switch to “VIDEO”. 3 Set the P ower Switc h to “PLA Y” while pressing down the Loc k Button located on the switch. 4 T o start playback, press 4 / 9 .
EN 21 Master P age: Right Shuttle Search Allows high-speed searc h in either direction durin g video playbac k. 1) During play back, press 5 for forw ard search, or 3 for reverse searc h. 2) T o resume normal playback, press 4 / 9 . ● During playbac k, press and hold 5 or 3 .
22 EN Master P age: Left T hese are some basic type s of connections. When making the connections, refer also to your VCR and TV instruction manuals. * Not required for watching still images only . ** Connect when y our TV/VCR has only A/V input connectors.
EN 23 Master P age: Right-start DIGIT AL STILL CAMERA (D.S .C.) RECORDING & PLA YBA CK D.S.C. RECORDING Y ou can use your camcorder as a Digital Still Camera for taking snapshots. Still images are stored in the memory card. NOTE: Before continuing, perfor m the procedures listed below: ● Pow e r ( 墌 pg.
24 EN Master P age: Left-Heading0 D.S.C. PLA YBA CK Images shot with the cam corder are automatically numbered, then stored in numerical order in the memory card. Y ou can view the stored image s, one at a time, much like flipping through a photo album.
EN 25 Master P age: Right Y ou can view video clips ( 墌 pg. 50) stored in the memory card. 1 Load a memory card. ( 墌 pg. 16) 2 Set the VIDEO/MEMOR Y Switch to “MEMOR Y”. 3 Set the P ower Switc h to “PLA Y” while pressing down the Loc k Button located on the switch.
26 EN Master P age: Left Y ou can view several different files stored in the memory card at a time. This bro wsing capability makes it easy to locate a particular file you want. 1 F or Index Pla yback of image files , perform 1 – 6 in “Normal Playbac k Of Images” ( 墌 pg.
EN 27 Master P age: Right T he Protect mode helps prevent the accidental erasure of files. 1 Load a memory card. ( 墌 pg. 16) 2 Set the VIDEO/MEMOR Y Switch to “MEMOR Y”. 3 Set the P ower Switc h to “PLA Y” while pressing down the Loc k Button located on the switch.
28 EN Master P age: Left T o remov e protection from all files stored in the memo ry card 9 Rotate the MENU Wheel to select “C ANC.ALL ”, and press it. T he PRO TECT screen appears. 10 Rotate the MENU Wheel to select “EXECUTE”, and press it. ● T o cancel selection, select “RETURN”.
EN 29 Master P age: Right By resetting the file name , a new folder will be made. T he new files you are going to make will be stored in the new folder . It is convenient to separate the new files from previously made files. (A vailable only for Image and video clip files.
30 EN Master P age: Left T o Print By Select ing Still Images And Nu mber Of Prints 1 P erform steps 1 – 8 in “T o Print All Still Images (One Print F or Each)” ( 墌 pg. 29). 2 Rotate the MENU Wheel to select “CURRENT”, and press it. T he DPOF screen appears.
EN 31 Master P age: Right-start ADV ANCED FEA TURES MENUS FOR DET AILED ADJUSTMENT T his camcorder is equipped with an easy-to-use, on- screen menu system that simplifies many of the more detailed camcorder settings. ( 墌 pg. 32 – 41) 1 F or Video and D .
32 EN Master P age: Left-Heading0X2 MENUS FOR DET AILED ADJUSTMENT (cont.) 4) Press the MENU Wheel in. T he Menu Screen returns. ● Repeat the procedure if you wish to set other function menus. 5) Press the MENU Wheel in again. T he Menu Scree n closes.
EN 33 Master P age: Right W I P E–S L I D E : Wipe in from right to left, or wipe out from left to right. WIPE – DOOR : Wipe in as the two halv es of a black screen open to the left and right, revealing the scene, or wipe out and the black screen reappears from left and right to cover the scene.
34 EN Master P age: Left RECORDING MENUS (cont.) W. B A L A N C E (F actory-preset: AU TO ) F or details, refer to “White Balance Adjustment” ( 墌 pg. 47). AU TO : White balance is adjusted automatically . MWB : Adjust the w hite balance manually when shooting under v arious types of lighting.
EN 35 Master P age: Right Gain up GAIN UP (F actory-preset: AG C ) OFF : Allows y ou to shoot dark scenes with no picture brightness adjustment. AG C : The over all appearance ma y be grain y , but the image is bright. AU TO : The shutter speed is automatically adjusted.
36 EN Master P age: Left 5-Second Recording Record a vacation or an important event in 5-second clips to keep the action moving. T his function is a vailable only for video recording.
EN 37 Master P age: Right Snapshot flash B-IN FLASH (F actory-preset: AU TO ) OFF : Will not fire. AU TO : Fires automatically if it is dark ( appears). AU TO C : Fires automatically if it is dark ( appears) and reduces the Red-Ey e effect in the subject’ s eyes.
38 EN Master P age: Left INFO LCD setting INFO LCD (F actory-preset: ON ) OFF : T he shooting information does not appear . ON : Makes the shooting information appears on the INFO LC D . Ti tl e i m p o s e F or details, refer to “T itle Impose” ( 墌 pg.
EN 39 Master P age: Right DSC Picture quality T he Picture Quality mode can be selected to best match your needs. T wo Pi cture Quality modes are a vailable: FINE ( ) and ST AND ARD ( ) (in order of quality).
40 EN Master P age: Left-Heading0 PLA YBA CK MENUS VIDEO Playback sound During tape playbac k, th e camcorder detects the sound mode in whic h the recording was made, and pla ys the sound back. Select the type of sound to accompany y our playbac k picture.
EN 41 Master P age: Right SYSTEM Each setting is linked with “ s ”, whic h appears when the P ower Switch is set to “ M ”. ( 墌 pg. 31) The parameters ar e the same as in the description on page 37.
42 EN Master P age: Left-Heading0 FEA TURES FOR RECORDING Makes dark subjects or areas even brig hter than they would be under good natural lighting. Although the recorded image is not grainy , it ma y look as if it is strobing due to the slow shutter speed.
EN 43 Master P age: Right Motor Drive Mode Kee p i ng SNAPSHO T pressed in step 5 provides an effect similar to serial photograph y . (Interval between still images: approx. 1 second) ● T he Motor Drive mode is disabled w hen “REC SELECT” is set to “ / ”.
44 EN Master P age: Left Once the camcorder is set, the ca mcorder operator can become part of the scene in a more natural wa y , adding the final touch to a memorable picture. 1 Set the P ower Switc h to “ M ” while pressing down the Lock Button located on the switch.
EN 45 Master P age: Right T he camcorder’ s Ful l Range AF system offers continuous shooting ability from close-up (as close as approx. 5 cm to the subject) to infinity . However , correct focus may not be obtainable in the situations listed below (in these cases perform “Manual F ocus”): ● When two subjects ov erlap in the same scene.
46 EN Master P age: Left Manual exposure control is recommended in the following situations: ● When shooting using reverse lighting or w hen the background is too bright. ● When shooting on a reflective natur al background such as at the beach or w hen skiing.
EN 47 Master P age: Right Backlight compensation brightens the subject quickly . Press BACK L IG HT . The indicator is display ed and the subject is brightened.
48 EN Master P age: Left T he Na vigation Function helps you chec k tape contents by making thumbnail images on a memory card. T o make thumbnail images during video recording aut omatically 1 Load a cassette. ( 墌 pg. 15) 2 Load a memory card. ( 墌 pg.
EN 49 Master P age: Right T o add thumbnail images during video playback 1 Pe r f o r m s t e p s 1 to 4 in “T o find scenes on tape using thumbnail images (NA VIGA TION Searc h)”. 2 Press 4 / 9 to start video playback. 3 Press NA VI STO R E at the desired point.
50 EN Master P age: Left Y ou can make vi deo clips from real-time camera image or recorde d video footage and st ore them in a memory card as files which can be con veniently sent via E-Mail. T o make video clips from real-time camera image 1 Load a memo ry card.
EN 51 Master P age: Right 6 Press 4 / 9 to start video playback. 7 Press E-MAIL to engage the E-M ail Clip Record- Standby mode. ● “E-CLIP” appears.
52 EN Master P age: Left T he following accessories (provided with GR-DV5000 only) ha ve been designed to be attached onto the Info-Shoe of the camcorder and the power is supplied via the Info-Shoe. Vi d e o L i g h t : Enables you to shoot motion video or still images under low light by continuous lighting.
EN 53 Master P age: Right-Heading0 DUBBING * Connect w hen your TV/VCR has an S-VIDEO IN/OUT connector . I n this case, it is not necessary to connect the yellow video cable. ** When connecting the cable, open the co ver . T o use this camcorder as a play er .
54 EN Master P age: Left It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a D V connector . Since a digital signal is sent, there is little if any image or sound deterioration. 1 Make sure all units are turned off.
EN 55 Master P age: Right It is also possible to copy recorded scenes from another video unit equipped with a DV connector onto the camcorder . Since a digital signal is sent, there is little if any image or sound deterioration. 1 Make sure all units are turned off.
56 EN Master P age: Left Still images can be dubbed fr om a tape to a memory card. 1 Load a cassette. ( 墌 pg. 15) 2 Load a memo ry card. ( 墌 pg. 16) 3 Set the VIDEO/MEMORY Switch to “VIDEO”. 4 Set the P ower Switch to “PLA Y” while pressing down the Lock Button located on the switc h.
EN 57 Master P age: Right-Heading0 USING THE REMOTE CONTROL UNIT T he Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Pla yback, Stop, P ause, Fa st-F orward and Rewind) of your VCR. It also makes additional pla yback functions possible.
58 EN Master P age: Left . Slow-Motion Playback Allows slow-speed sear ch in either direction during video playbac k. During normal video playbac k, press SLOW ( Y I o r I U ) more than approx. 2 seconds. ● After approx. 5 minutes (approx. 20 seconds with an 80-minute cassete) in Slow Rewind or approx.
EN 59 Master P age: Right ● T o deactivate the se lected effect, press EFFECT ON/OFF . T o reactivate the selected effect press EFFECT ON/OFF again. ● T o change the selected effect, repeat from step 2 above. T he audio trac k can be customised only when recorded in the 12-bit and SP modes.
60 EN Master P age: Left Y ou can record a new scene into a previously recorded tape, replacing a section of the original recording with minimal picture distortion at the in and outpoints. T he original audio remains unchanged. NOTES: ● Before performing the follo wing steps, m ake sure that “TIME CODE” is set to “ON”.
EN 61 Master P age: Right Create edited videos easily using your camcorder as the source pla yer . Y ou can select up to 8 “cuts” for automatic editing, in any order you like.
62 EN Master P age: Left USING THE REMOTE CONTROL UNIT (cont.) Make Connections Also refer to page 22. * Connect w hen your TV/VCR has an S-VIDEO IN connector . In this case, it is not necessary to connect the yellow video cable. ** When connecting the cable, open the co ver .
EN 63 Master P age: Right Select Scenes 6 Press PLA Y ( U ) and then press R.A.EDIT ON/OFF on the remote control. T he Random Assemble Editing Menu app ears. 7 If using a Wipe/F ader at the beginning of the scene, press FA D E / W I P E on the remote control.
64 EN Master P age: Left Automatic Editing T o VCR 13 Rewind the tape in the camcorder to the beginning of the scene y ou want to edit and press PAU S E ( 9 ). 14 Press VCR REC STBY ( 79 ), or manually engage the VCR’ s Record-P ause mode. 15 Press the Recording Start/Stop Button on the camcorder .
EN 65 Master P age: Right-Heading0 SYSTEM CONNECTIONS [A] Using USB cable It is possible to do the following things: ● T ransfer still images stored on a memory card to a PC. ● T ransfer still/moving images recorded on a tape to a PC. ● Capture still/moving images in real-time.
66 EN Master P age: Left T his camcorder can be used as a We bCam via USB connection. 1 Make sure all necessary s oftware (prov ided) are installed in your PC and all units are turned off. 2 Connect the camcorder to your PC using the USB cable. 3 Set the VIDEO/MEMORY Switch to “MEMOR Y”.
Master P age: Left-start EN 67 REFERENCES DET AILS ITEMS NOTES V Po w e r ( 墌 pg. 10) ● Perform charging where the tempe rature is between 10°C and 35°C. 20°C to 25°C is the ideal temperature range for c harging. If the environment is too cold, charging ma y be incomplete.
68 EN Master P age: Left-Heading0 TROUBLESHOOTING If, after following the steps in the chart below , the probl em still exists, please consult your nearest JVC dealer . Power Video and D.S.C . Recording T he camcorder is a microcomputer-controlled device.
EN 69 Master P age: Right Video and D.S.C. Playback 7. T he LCD monitor or viewfinder indications blink. 7. • Certain Wipe/F ader eff ects, certain modes of Program AE with special effects, “DIS” and other functions that cannot be used together are selected at the same time.
70 EN Master P age: Left Advanced features SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 13. T he focus does not adjust automatically . 13. • Focus is s et to the Manual mode. • T he recording was done in a dark place, or the contrast was l ow . • T he lens is dirty or covered with condensation.
EN 71 Master P age: Right Other problems 24. Although Snapshot is attempted, flash does not take place. 24. • The s ubject is too bright with the flash set to “ A UT O” or “AU T O C ”. • If blinks, the flash is being charged. • T he camcorder is in the Record mode.
72 EN Master P age: Left 32. When the camcorder is connected via the D V connector , the camcorder does not operate. 32. • T he D V cable was plugged/ unplugged with power turned on. 32. • T urn t he camcorder ’ s power off and on again, then operate it.
EN 73 Master P age: Right 41. T he LCD monitor , the viewfinder and the lens ha ve become dirty (ex. fingerprints). 41. — 41. • Wipe them gently with soft cloth. Wiping strongly can cause damage. ( 墌 pg. 77) T o clean the viewfinder , please consult your nearest JVC dealer .
74 EN Master P age: Left-Heading0 CA UTIONS General Battery Precautions If the remote control is not functioning even if it is being operated correctly , the batteries are exhausted. Replace them with fresh ones. Use only the follo wing batteries: AAA (R03) size x 2 Please make note of the fo llowing rules for battery use.
EN 75 Master P age: Right Memory Cards T o properly use and store your memory cards, be sure to read the following cautions: 1. During use… ... make sure the memory card bears the SD or MultiMediaCard mark. ... make sure the memory card is positioned properly when inserting.
76 EN Master P age: Left 5. Dirty heads can cause the following pr oblems: • No picture during playbac k. • Blocks of noise appear during playbac k. • During recording or playbac k, the Head Clog Wa rning indicator “ ” appears. • Recording cannot be performed properly .
EN 77 Master P age: Right-Heading0 USER MAINTENANCE 1 T urn off the camcorder . 2 Slide and hold OPEN/EJECT in the direction of the arrow , then pull the cassette holder cover open until it locks. T he cassette ho lder opens automatically . Remove the cassette.
78 EN Master P age: Left-Heading0 SPECIFICA TIONS Camcorder For G e n e ra l P ow er supply : DC 6.3 V (Using A C P ower Adapter/Cha rger) DC 7.2 V (Using battery pack) P ow er consumption LCD monitor off, viewfinder on : Approx. 3.8 W LCD monitor on, viewfinder off : Approx.
EN 79 Master P age: Right Specifications shown are for SP mode unless otherwise indicated. E & O.E. Design and specifications subject to change without notice. For Connectors S S-V ideo input : Y : 0.8 V to 1.2 V (p-p), 7 5 Ω , analogue C: 0.2 V to 0.
Master P age: Left-start 80 EN INDEX INDEX Contr ols, Connect ors And Indicat ors Y Z GR-DV5000Asia.book Page 80 We d nesday, March 12, 2003 5 :46 PM.
EN 81 Master P age: Right Controls a •Menu Wheel [MENU] ........................ 墌 pg. 31 •Speaker/Headphone V olume Control [V OLUME +, –] ................................. 墌 pg. 20 b Snapshot Button [SNAPSHO T]....... 墌 pg. 23, 42 c P ow er Zoom Lever [T/W] .
82 EN Master P age: Left-Heading0 INDEX Indications Indications LCD Monitor/Viewfinder Indications During Video Recording Only a Navigation Indicator ( 墌 pg. 48) (Appears when “NA VIGA TION” is set to other than “MANUAL ”.) b Selected Wipe/F ader Effect I ndicator ( 墌 pg.
EN 83 Master P age: Right a Operation Mode ( 墌 p g. 13) b • : Night-Scope Indicator ( 墌 pg. 42) (Appears when Nig ht-Scope is engaged.) • : Gain Up Mode ( 墌 pg. 35) (Appears when “GAIN UP” is set to “ AUT O” and the shutter speed is automatically adjusted.
84 EN Master P age: Left Wa r n i n g I n d i c a t i o n s Indications Function Displays the battery remaining po wer . Remaining power level: high Remaining power level: exhausted As the battery power comes close to nil, the battery indicator blinks.
EN 85 Master P age: Right Indications Function MEMOR Y IS FULL Appears when the memory card’ s memory is ful l and shooting is not possible. COPYING F AILED ● Appears if dubbing of copyguarded signals is attempted while this camcorder is being used as a recor der .
86 EN Master P age: Left A AC Power Adapter/Charger ........................... 10 , 11 Animation ........................................................... 36 Audio Dubbing ........................................... ........ 59 Auto Focus .........
EN 87 Master P age: Right P Picture Quality (QUALITY) .......................... ........ 39 Playback sound (SOUND MODE, 12bit MODE) ........................... 40 Playback Special Effects .............................. ........ 58 Playback Zoom .....
AA/A G/AH ®Registered T rademark owned b y VICT OR COMP ANY OF JAP AN, L TD . COPYRIGHT© 2003 VICT OR COMP ANY OF JAP AN, L TD . EN Master P age: Cover4 GR-DV5000Asia_12Co ver4.fm P a ge 88 GR-D V5000 GR-D V4000 Printed in Japan 0403-FO-ID-VP GR-DV5000Asia.
An important point after buying a device JVC GR-DV4000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC GR-DV4000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC GR-DV4000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC GR-DV4000 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC GR-DV4000 will certainly help you make a decision on the purchase.
If you already are a holder of JVC GR-DV4000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC GR-DV4000.
However, one of the most important roles played by the user manual is to help in solving problems with JVC GR-DV4000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC GR-DV4000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
