Instruction/ maintenance manual of the product GR-DV1800 JVC
Go to page of 96
LYT0736-001A Printed in Japan 0101FOV * UN * SN EN EN DIGITAL VIDEO CAMERA G R-D V2000 G R-D V1800 G R-D V2000 G R-D V1800 INSTRUCTIONS Please visit our Homepage on the W orld W ide Web and answer our Consumer Survey (in English only): http://www .jvc-victor .
2 EN This camcorder is designed to be used with P AL-type colour television signals. It cannot be used for playback with a television of a different standard.
EN 3 This camcorder is designed exclusively for the digital video cassette, SD Memory Card and MultiMediaCard. Only cassettes marked “ ” and memory cards marked “ ” or “ ” can be used with this unit. Before recording an important scene .
4 EN PROVIDED ACCESSORIES The provided lens hood helps block out glare when shooting under bright sunlight, the same way professional photographers do.
EN 5 AUTOMA TIC DEMONSTRA TION Automatic Demonstration takes place when “ DEMO MODE ” is set to “ ON ” (factory-preset). A vailable when the Power Switch is set to “ ” or “ ” and no cassette is in the camcorder . Performing any operation during the demonstration stops the demonstration temporarily .
6 EN GETTING ST ARTED Power This camcorder ’ s 2-way power supply system lets you choose the most appropriate source of power . Do not use provided power supply units with other equipment. CHARGING THE BA TTERY P ACK 1 Make sure you unplug the camcorder ’ s DC cord from the AC Power Adapter/Charger .
EN 7 1 2 T o DC Input connector To A C outlet AC Power Adapter/ Charger DC cord A TTENTION: Before detaching the power source, make sure that the camcorder ’ s power is turned off.
8 EN 3 PAUSE 2 1 Grip Adjustment 1 Separate the V elcro strip. 2 Pass your right hand through the loop and grasp the grip. 3 Adjust so that your thumb and fingers can easily operate the Recording Start/Stop Button and Power Zoom Lever . Refasten the V elcro strip.
EN 9 F. W HI T E F A D E R /WI P E AM A E PR O G R A CA MER L MA N U A M SYSTE DSC END AY DIS P L C AN E W. BA L 12 . .0 1 25 17 30 : RE N E ON S C LC D / TV UTO A IM E T DA T E / T I ME COD E CLO CK AD J . – – – F F O N RE TUR CLO CK AD J . 12 .
10 EN Loading/Unloading A Cassette The camcorder needs to be powered up to load or eject a cassette. 1 Slide and hold OPEN/EJECT in the direction of the arrow then pull the cassette holder cover open until it locks. The cassette holder opens automatically .
EN 11 Memory card Card Cover Loading A Memory Card The provided MultiMediaCard is already inserted in the camcorder when you receive the camcorder . 1 Make sure the camcorder ’ s power is off. 2 Open the card cover ( MEMORY CARD ). 3 Insert the memory card clipped edge first.
12 EN UXG A P L A Y O F F Operation Mode Choose the appropriate operation mode according to your preference using the Power Switch and Shooting Mode Switch. When the Power Switch is set to “ ” , “ ” appears. When set to “ ” or “ ” , there is no indication.
EN 13 REC M ODE – SP LP Recording Mode Setting Set the tape recording mode depending on your preference. 1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch, and open the LCD monitor fully or pull out the viewfinder fully .
14 EN GETTING ST ARTED (cont.) TY QUA L I UXG A FI N E AU TO GA X SIZ E – – – N RE TUR Display Menu Screen MENU Wheel Power Switch Lock Button Power Lamp Picture Mode Setting The Picture mode can be selected to best match your needs.
EN 15 NOTES: ● If the Shooting Mode Switch is set to “ XGA/VGA ” or “ UXGA ” during video recording, the camcorder stops video recording. ● The camcorder automatically zooms out to less than 2X when the Shooting Mode Switch is set to “ UXGA ” .
16 EN 180 ° 90 ° 25 min 90 min 89 min 3 min 2 min 1 min 0 min min BR I GH T RECORDING Basic Recording For Video Power lamp T ally lamp (lights while recording is in progress) Lock Button Recording S.
EN 17 Self-Recording JOURNALISTIC SHOOTING In some situations, different shooting angles may provide more dramatic results. Hold the camcorder in the desired position and tilt the LCD monitor in the most convenient direction. It can rotate 270 ° (90 ° downward, 180 ° upward).
18 EN SNAP M ODE – FULL MU L T I – 4 MU L T I – 9 NEGA POS I PIN – UP FRA M E * There is the sound effect of a shutter closing. √ When “ FULL ” , “ FRAME ” , “ PIN-UP ” or “ NEGA POSI ” is selected, snapshot recording will always be performed with higher quality ( pg.
EN 19 UXG A F I NE 10 / 24 RECORDING Basic Recording For Digital Still Camera (D.S.C.) Basic Shooting (Snapshot) Y ou can use your camcorder as a Digital Still Camera for taking snapshots. NOTE: Y ou should already have performed the procedures listed below .
20 EN 10 x W T 1 x W T 10 x W T 20 x W T 40 x W T RECORDING Basic Recording For Video And D.S.C. Zoom in (T : T elephoto) Zoom out (W: W ide angle) Power Zoom Lever Zoom display FEA TURE: Zooming PURPOSE: T o produce the zoom in/out effect, or an instantaneous change in image magnification.
EN 21 NOTE: Recording From The Middle Of A T ape Time Code During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback. If recording starts from a blank portion, the time code begins counting from “ 00:00:00 ” (minute:second:frame).
22 EN Progressive Mode Recording This mode lets you record moving images (successive jitter -free still images) onto a tape. Images can then played back jitter -free, with superior quality . High-resolution still images can also be processed on a personal computer or can be printed out ( pg.
EN 23 Description of Progressive Scan CCD Progressive Scan is a special image sensing method which, unlike conventional interlace scanning, is able to pick up all the lines of picture information in one Scan.
24 EN RECORDING Advanced Features For Video And D.S.C. (cont.) Dual Shooting Lets you record images on a tape and store still images in a memory card simultaneously . In other words, it is possible to store still images in the memory card without interrupting image recording on the tape.
EN 25 While focusing on a nearer subject While focusing on a further subject FEA TURE: Auto Focus PURPOSE: The camcorder ’ s Full Range AF system offers continuous shooting ability from close-up (as close as approx. 5 cm to the subject) to infinity .
26 EN F. W HI T E FADER / W I PE AM A E PR O GR A CA MER L M ANUA M S YSTE DSC END AY DIS P L C AN E W. BA L RE N E ON S C LC D / TV N O IM E T DA T E / T I ME COD E CLO CK AD J .
EN 27 Menu Screen Explanations Refer to “ Fade/W ipe Effects ” ( pg. 32, 33). Refer to “ Programme AE W ith Special Effects ” ( pg. 34, 35). Refer to “ White Balance Adjustment ” and “ Manual White Balance Operation ” ( pg.
28 EN : Factory-preset Menu Screen Explanations (cont.) RECORDING Advanced Features For Video And D.S.C. (cont.) WIDE MODE Refer to “ Self-T imer ” ( pg. 30). Refer to “ 5-Second Recording ” ( pg. 31). Allows you to record a few frames only .
EN 29 : Factory-preset BEEP Even though not heard while shooting, shutter sound is recorded on the tape. The beep sounds when the power is turned on or off, and at the beginning and en d of recording. Also to activate the shutter sound effect ( pg.
30 EN SEL F – TI M E R – ON OF F Self-Timer Once the camcorder is set, the camcorder operator can become part of the scene in a more natural way , adding the final touch to a memorable picture. 1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch.
EN 31 5 S – 5 S OF F A N IM. 5-Second Recording Record a vacation or an important event in 5-second clips to keep the action moving. This function is available only for video recording. 1 Set the Shooting Mode Switch to “ VIDEO ” , then set the Power Switch to “ ” while pressing down the Lock Button located on the switch.
32 EN RECORDING Advanced Features For Video And D.S.C. (cont.) Fade/Wipe Effects These effects let you make pro-style scene transitions. Use them to spice up the transition from one scene to the next. Y ou can also vary transitions from scene to scene.
EN 33 Fader And Wipe Menu Menu Effect Fade in or out with a white screen. Fade in or out with a black screen. Fade in to a colour screen from a black and white screen, or fade out from colour to black and white.
34 EN IC F I L M CLASS SEP I A GH T T W ILI ON E M ONO T SN O W S SP O RT G IH T SP OT L E S T ROB 1 SL O W 2 SL O W ER SHUT T 1/120 RECORDING Advanced Features For Video And D.S.C. (cont.) Programme AE With Special Effects 1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch.
EN 35 SHUTTER 1/50 – The shutter speed is fixed at 1/50th of a second. Black bands that usually appear when shooting a TV screen become narrower . 1/120 – The shutter speed is fixed at 1/120th of a second. The flickering that occurs when shooting under a fluorescent light or mercury-vapour lamp is reduced.
36 EN 3 RECORDING Advanced Features For Video And D.S.C. (cont.) Exposure Control Manual exposure adjustment is recommended in the following situations: • When shooting using reverse lighting or when the background is too bright. • When shooting on a reflective natural background such as at the beach or when skiing.
EN 37 White Balance Adjustment A term that refers to the correctness of colour reproduction under various lighting. If the white balance is correct, all other colours will be accurately reproduced. The white balance is usually adjusted automatically .
38 EN PLA YBACK Basic Playback For Video Power Switch Rewind Button ( 2 ) Fast-Forward Button ( 3 ) Play/Pause Button ( 4 / 6 ) Stop Button ( 5 ) 1 Load a tape ( pg. 10). 2 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch.
EN 39 PLA YBACK Advanced Features For Video MD OE SOUND MD OE 12 BI T RO SYN CH OD E REC M IN U T S/A V P COP Y STE RE O – SOUND 1 SP OF F OF F – – – – – N RE TUR O.O Using Menus For Detailed Adjustment The following procedure applies to all except Synchro Comp ( pg.
40 EN PLA YBACK Advanced Features For Video (cont.) 12 B I T / SOUND 1 SP 4 6 2 5.1 1 2 7 . : 0 3 1 0 1 2:3 4:2 4 Playback Sound During video playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture.
EN 41 B L ANK S EARCH 4 4 Power Switch BLANK SEARCH Button Blank Search Helps you find where you should start recording in the middle of a tape to avoid time code interruption ( pg. 21). 1 Load a tape ( pg. 10) and set the Power Switch to “ ” while pressing down the Lock Button located on the switch.
42 EN 10 / 24 1 2 0 5 0 . – 1 0 2 0 . 1 0 0 1 11 / 24 1 2 0 5 0 . – 1 0 2 0 . 1 0 1 1 12 / 24 1 2 0 5 0 . – 1 0 2 0 . 1 0 2 1 13 / 24 1 2 0 5 0 . – 1 0 2 0 . 1 0 3 1 Power Switch Lock Button Normal Playback Images shot with the camcorder are automatically numbered, then stored in numerical order in the memory card.
EN 43 001 F 002 S 003 S 005 F 004 F EXIT 1 00-DVC00003 VGA 006 F IMAGE Index number Selected image Picture quality Protect icon Playback Screen Index Screen The images you shot can be displayed together with their index information.
44 EN 001 F 002 S 003 S 005 F 004 F 006 F EXIT PROTECT 001 F 002 S 003 S 005 F 004 F 006 F EXIT PROTECT M S YSTE AY DIS P L Y MEM OR VID E O CT PR OT E DL .
EN 45 001 F 002 S 003 S 005 F 004 F 006 F DELETE EXIT SE ECT L EXE CU T E – CA NCE L DL . E IM A G E MENU Wheel Display DELETE Index Screen CAUTION: Do not remove the memory card or perform any other operation (such as turning off the camcorder) during deletion.
46 EN PLA YBACK Advanced Features For D.S.C. (cont.) EXIT 001 002 003 005 004 006 EXIT FRAME 3 FRAME Superimposing A Print Frame A selection of print frames are stored in the camcorder . A frame can be superimposed over a still image. 1 Play back an image stored in the memory card.
EN 47 FO M AT R FO M AT R EX S T I NG I ERASE DA T A ? AL L EXE C U TE – C ANC E L DL E IM A G E CT PROTE DL . . E FR A M E DPOF AT FO R M N RE TUR C ANC E L EXE C U TE MENU Wheel Lock Button Power Switch Display Initialising A Memory Card Y ou can initialise a memory card anytime.
48 EN SE ECT L E X E CU T E – CANCE L DL . E FR A M E 013 F 014 F 015 F 017 F 016 F 018 F DELETE EXIT Print Frame Deletion A print frame created on a PC can be transferred to a memory card using the provided software. Print frames that have been transferred to a memory card can be deleted when they are no longer needed.
EN 49 SE ECT L AL L – CANCE L DL . E FR A M E AL L EXEC UTE – C A NC EL DL . E FR A M E TO DELETE ALL PRINT FRAMES 1 Perform steps 1 through 5 on pag. 48. 2 Rotate the MENU wheel to select “ ALL ” and press it. The Deletion Confirmation Screen appears.
50 EN – DP OF AL L SEL ECT RES E T AL L – EXEC UTE CANCE L DPOF Setting Print Information (DPOF Setting) This camcorder is compatible with the DPOF (Digital Print Order Format) standard in order t.
EN 51 019 00 00 00 00 03 00 020 021 023 022 EXIT 100-DVC00021 VGA 024 DPOF SE ECT L – EXEC UTE CANCE L DPOF TO PRINT BY SELECTING STILL IMAGES AND NO. OF PRINTS 1 Perform steps 1 through 5 on pg. 50. 2 Rotate the MENU wheel to selsect “ SELECT ” and press it.
52 EN CONNECTIONS Basic Connections * When connecting the cables, open this cover . ** The Audio cable is not required for watching still images only .
EN 53 1 Make sure all units are turned off. 2 Connect the camcorder to a TV or VCR as shown in the illustration ( pg. 52). If using a VCR . . . go to step 3. If not . . . go to step 4. 3 Connect the VCR output to the TV input, referring to your VCR ’ s instruction manual.
54 EN CONNECTIONS Advanced Connections Connection T o A Personal Computer This camcorder can transfer still images to a PC via DV or USB connection as shown in the illustration. 1 Make sure the camcorder and PC are turned off. 2 Connect the camcorder to your PC using the appropriate cable as shown in the illustration.
EN 55 Video unit equipped with a DV connector Connection T o A Video Unit Equipped With A DV Connector Connection to the GV -DT3 Digital Printer (optional) allows you to print out images or transfer them to a PC. It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector .
56 EN DUBBING Dubbing T o A VCR [T o use this camcorder as a player] 1 Following the illustration, connect the camcorder and the VCR. Also refer to pg.
EN 57 * Connect when an S-V ideo cable is not used. ** When connecting the cables, open this cover . VCR (Playback deck) Connector cover** TV To AV To S-VIDEO Cable Adapter (not provided) If your VCR has a SCART connector , use a commercially available output cable adapter .
58 EN PLA Y ( 4 ) STOP ( 5 ) Dubbing T o A Video Unit Equipped With A DV Connector (Digital Dubbing) It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector . Since a digital signal is sent, there is little if any image or sound deterioration.
EN 59 V ideo unit equipped with DV output connector T o DV OUT T o DV IN Power Switch Core filter DV cable (optional) Dubbing From A Video Unit Equipped With A DV Connector (Digital Dubbing) [T o use .
60 EN SP 4 6 COP Y OF F ON – Play/Pause Button ( 4 / 6 ) Display Power Switch Lock Button Dubbing Images Recorded On A T ape T o A Memor y Card Images can be dubbed from a tape to a memory card . 1 Load a memory card ( pg. 1 1) and cassette ( pg.
EN 61 5m 30 ° 30 ° 1 3 2 + – + – The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible.
62 EN Buttons Infrared beam transmitting window Zoom (T/W) Buttons DISPLA Y Button SHIFT Button SLOW Rewind/Forward Buttons Left/Right Buttons REW Button FADE/WIPE Button EFFECT ON/OFF Button EFFECT Button P AUSE IN Connector ST ART/STOP Button MBR SET Button SNAPSHOT Button Up Button INSERT Button Down Button A.
EN 63 Press T Normal playback Left or SLOW Rewind Button T o move image, press (Right) while keeping SHIFT held down. P AUSE PLA Y Zoom Buttons SHIFT Right or SLOW Forward Button Up Button Down Button STOP FEA TURE: Slow-Motion Playback PURPOSE: T o allow slow-speed search in either direction during video playback.
64 EN OF 1 2 3 4 5 F CLASS I C M ON OTO NE SEP I A S T ROBE VID E O ECH O P LAYBAC K T EFFEC FIL M PLA Y EFFECT EFFECT ON/OFF PLA YBACK EFFECT Select Menu FEA TURE: Playback Special Effects PURPOSE: T o allow you to add creative effects to the video playback image.
EN 65 VCR CODE LIST MITSUBISHI NEC GRUNDIG HITACHI PANASONIC JVC BLAUPUNKT AKAI FERGUSON A B C VCR BRAND NAME BUTTONS (A) (B) SANYO SHARP TOSHIBA SONY THOMSON, TELEFUNKEN, SABA, NORDMENDE SELECO, REX PHILIPS VCR BRAND NAME BUTTONS (A) (B) MBR SET SHIFT Random Assemble Editing [R.
66 EN USING THE REMOTE CONTROL UNIT (cont.) DISPLA Y MAKE CONNECTIONS Also refer to pg. 52 and 53. 1 A JVC VCR equipped with a remote pause connector . . . ... connect the editing cable to the Remote P AUSE connector . A JVC VCR not equipped with a remote pause connector but equipped with an R.
EN 67 1 2 3 4 5 6 7 8 –– : –– ~ ~ ~ ~ ~ ~ ~ ~ – – : –– 0 : 00 0 –– TOT AL EC O D E M I T N IO U T MO D E CANCEL R.A.EDIT ON/OFF PLA Y F ADE/WIPE EFFECT EDIT IN/OUT SELECT SCENES 4 Point the remote control at the camcorder ’ s remote sensor .
68 EN USING THE REMOTE CONTROL UNIT (cont.) 1 2 3 4 5 6 7 8 00 :2 5 ~ 02 : 05 –– 0 7:1 8 ~ 08 : 31 –– –– 0 3 : 33 ~ 05 : 53 13 : 15 15 : : 55 ~ ~ ~ ~ 16 : 29 1 6: 3 0 9:3 9 –– –– –– –– –– –– TO TAL EC O D E M I T N IO U T M O D E 0 9:3 0 ~ P AUSE VCR REC STBY REW STOP R.
EN 69 1 2 3 4 5 6 7 8 –– : –– ~ ~ ~ ~ ~ ~ ~ ~ – – : –– 0 : 00 0 –– TOT AL N IO U T MO D E R.A.EDIT ON/OFF EC O D E M I T For More Accurate Editing Some VCRs make the transition from Record-Pause to Record mode faster than others.
70 EN USING THE REMOTE CONTROL UNIT (cont.) RO SYN CH O. 1 – ADJUSTMENT OF VCR/CAMCORDER TIMING 4 Point the remote control at the camcorder ’ s remote sensor and press R.A.EDIT ON/OFF to make the Random Assemble Editing menu disappear , then press the MENU wheel.
EN 71 6 e P AUSE STOP A.DUB PLA Y DISPLA Y Audio Dubbing The audio track can be customized only when recorded in the 12-bit mode ( 墌 pg. 27). NOTES: ● Audio Dubbing is not possible on a tape recorded in 16- bit audio, on a tape recorded in the LP mode or on a blank portion of a tape.
72 EN USING THE REMOTE CONTROL UNIT (cont.) P AUSE ST ART/STOP INSERT PLA Y REW STOP 1 2:3 4 6 w Insert Editing Y ou can record a new scene into a previously recorded tape, replacing a section of the original recording with minimal picture distortion at the in and outpoints.
EN 73 SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION TROUBLESHOOTING 1. No power is supplied. 2. “ SET DA TE/TIME! ” appears. 3. Recording cannot be performed. 4. There is no picture. 5. Some functions are not available using the MENU wheel. 6. The focus does not adjust automatically .
74 EN TROUBLESHOOTING (cont.) SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 7. The cassette will not load properly . 8. The memory card will not load properly . 9. In the 5-Second mode, recording ends before 5 seconds have elapsed. 10. Snapshot mode cannot be used.
EN 75 SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 17. The Dissolve function does not work. 18. The Picture W ipe and Dissolve functions do not work. 19. The picture wipe function does not work. 20. Scene transition does not go as expected. 17. • The Sepia, Monotone or Slow Shutter mode of Programme AE with special effects is activated.
76 EN TROUBLESHOOTING (cont.) SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 21. • The Picture W ipe or Dissolve functions are in use. •“ WIDE MODE ” is set to “ SQUEEZE ” or “ PS-WIDE ” in the Menu Screen. • A Fade-In or Fade-Out is in progress.
EN 77 SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 30. Images on the LCD monitor appear dark or whitish. 31. The rear of the LCD monitor is hot. 32. The indicators and the image colour on the LCD monitor are not clear . 33. The LCD monitor or viewfinder indications blink.
78 EN SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 35. During recording, sound cannot be heard. 36. Play , Rewind and Fast- Forward functions do not work. 37. A memory card cannot be played back. 38. The tape is moving, but there is no picture. 39. The LCD monitor image is distorted.
EN 79 SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 44. An unusual mark appears. 45. An error indication (E01 — E06) appears. 46. The charger indicator on the AC Power Adapter/ Charger does not light. 47. Picture does not appear on the LCD monitor . 48.
80 EN USER MAINTENANCE 1 2 Cassette holder cover OPEN/EJECT Switch PUSH HERE Cassette holder Hatch Cleaning The Camcorder 1 T o clean the exterior , wipe gently with a soft cloth. Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt.
EN 81 INDEX Jack Box 1 DC Input Connector [DC IN] ................. 墌 pg. 7 2 USB (Universal Serial Bus) Connector . .. 墌 pg. 54 3 S-V ideo Input/Output Connector: GR-DV2000, S-V ideo Output Connector: GR-DV1800, [S-VIDEO] .................... 墌 pg.
82 EN INDEX Controls, Connectors And Indicators 2 13 4 5 90!@ % q * ( w ^& # $ 8 P L A Y O F F 6 7 ).
EN 83 Controls 1 FOCUS Button ..................................... 墌 pg. 25 2 Snapshot Button [SNAPSHOT] ................ 墌 pg. 18, 19, 22, 24, 60 3 • Power Zoom Lever [T/W] .................. 墌 pg. 20 • Speaker/Headphone V olume Control [VOLUME] .
84 EN INDEX Indications LCD Monitor/Viewfinder Indications During Video Recording Only 1 Displays the selected Fade/W ipe effect. ( 墌 pg. 32, 33) 2 Appears when in the Squeeze, Cinema or PS Wide mode. ( 墌 pg. 28) 3 Rotates while the tape is running.
EN 85 LCD Monitor/Viewfinder Indications During Both Video And D.S.C. Recording 3 40 x BR W IG H T T 1. 1 1 0 . : PHOTO 0 0 1 0 $ 8 9 0 ! @ 2 1 3 4 5 7 6 # 1 Appears when the Power Switch is set to “ ” . ( 墌 pg. 12) 2 Appears when the optional flash attached to the info-shoe is ready .
86 EN INDEX Indications (cont.) LCD Monitor/Viewfinder Indications During Video Playback 1 Displays the sound mode. ( 墌 pg. 39, 40) 2 Displays the Blank Search mode. ( 墌 pg. 41) 3 Displays the tape speed. ( 墌 pg. 13) 4 Appears while a tape is running.
EN 87 Indications Function Displays the battery remaining power . Remaining power level: high Remaining power level: exhausted As the battery power comes close to nil, the battery indicator blinks. When the battery power is exhausted, power turns off automatically .
88 EN Indications Function ● Appears if Insert Editing is attempted on a tape recorded in the LP mode. ( 墌 pg. 72) ● Appears if INSERT ( w ) on the remote control is pressed when the erase protection tab is set to “ SA VE ” .( 墌 pg. 72) ● Appears if the Shooting Mode Switch is set to “ XGA/VGA ” or “ UXGA ” .
EN 89 General Batter y Precautions If the remote control is not functioning even if it is being operated correctly , the batteries are ex- hausted. Replace them with fresh ones. Use only the following batteries: AAA (R03) size x 2 Please make note of the following rules for battery use.
90 EN Memor y Cards T o properly use and store your memory cards, be sure to read the following cautions: 1. During use . . . .... make sure the memory card bears the SD or MultiMediaCard mark. .... make sure the memory card is positioned properly when inserting.
EN 91 Serious malfunctioning If malfunctioning occurs, stop using the unit immediately and consult your local JVC dealer . The camcorder is a microcomputer -controlled device. External noise and interference (from a TV , a radio, etc.) might prevent it from function- ing properly .
92 EN TERMS F Fade-In/Out ........................................ 墌 pg. 32, 33 Fast-Forward The T ape .............................. 墌 pg. 38 5-second recording mode ......................... 墌 pg. 31 Frame-By-Frame Playback .................. 墌 pg.
EN 93 P Picture Mode ............................................ 墌 pg. 14 Picture W ipe/Dissolve ......................... 墌 pg. 32, 33 Playback Special Effects ............................ 墌 pg. 64 Playback Zoom ...............................
94 EN SPECIFICA TIONS Camcorder For General Power supply : DC 6.3 V (Using AC Power Adapter/Char ger) DC 7.2 V (Using battery pack) Power consumption LCD monitor off, viewfinder on : Approx.
EN 95 For Connectors AV Video output :1 V ( p-p ) , 75 Ω , analogue Video input (GR-DV2000 only) : 0.5 V ( p-p ) – 2.0 V ( p-p ) , 75 Ω , analogue Audio output : 308 mV (rms), 1 k Ω , analogue.
COPYRIGHT© 2001 VICTOR COMPANY OF JAPAN, LTD. EG/EK Printed in Japan 0101FOV * UN * SN VICTOR COMP ANY OF JAPAN, LIMITED EN DIGITA L G R-D V2000 G R-D V1800 GR - GR - INSTRU 01 GR-DV2000/1800 EN Cover 01.
An important point after buying a device JVC GR-DV1800 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC GR-DV1800 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC GR-DV1800 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC GR-DV1800 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC GR-DV1800 will certainly help you make a decision on the purchase.
If you already are a holder of JVC GR-DV1800, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC GR-DV1800.
However, one of the most important roles played by the user manual is to help in solving problems with JVC GR-DV1800. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC GR-DV1800 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
