Instruction/ maintenance manual of the product Mini-LCD Transmitter TX-MLCD AMX
Go to page of 22
7UDQVPLWWHUV 7; 0 0/&' 0LQL 0 /&' 7UDQVPLWWHU ,QVWUXFWLRQ 0DQXDO.
Limited Warranty and Disclaimer AMX Corporation warrants its products to be free from defects in material and workmanship under normal use for a period of three years from date of purchase from AMX, with the following exceptions.
TX-MLCD Mini-LCD Transmitter Table of Contents i Table of Contents Introduction ............................................................................ 1 Overview 1 Features 1 Operation 2 Wiring the TX-MLCD 3 AXCESS Programming ..................
ii Table of Contents TX-MLCD Mini-LCD Transmitter.
TX-MLCD Mini-LCD Transmitter Introduction 1 Introduction Overview The TX – MLCD ( Figure 1 ) is a programmable Radio Frequency (RF) or Infrared (IR) wireless transmitter. Text for TX – MLCD menu functions is presented on a 2-line, 16 character, horizontal liquid crystal display (LCD).
2 Introduction TX-MLCD Mini-LCD Transmitter • RS – 232 port — used to program the TX – MLCD functions. The data rate is fixed at 1200 baud (bps).
TX-MLCD Mini-LCD Transmitter Introduction 3 Wiring the TX-MLCD Figure 3 shows how to connect the TX – MLCD RS – 232 port to an AXCESS RS – 232 cable for programming.
4 Introduction TX-MLCD Mini-LCD Transmitter.
TX-MLCD Mini-LCD Transmitter AXCESS Programming 5 AXCESS Programming Overview You can use the AXCESS software to program all features of the TX – MLCD. A working knowledge of the AXCESS programming l anguage is needed to thoroughly understand the operation of the TX – MLCD.
6 AXCESS Programming TX-MLCD Mini-LCD Transmitter Programming Restrictions AXCESS program restrictions include: 1. DEFINE_LATCHING, DEFINE_MUTUALLY_EXCLUSIVE, and DEFINE_TOGGLING are not supported. Similar functions are accomplished with combinations of ON, OFF, and IF … ELSE.
TX-MLCD Mini-LCD Transmitter AXCESS Programming 7 • A PUSH occurs in the program every time a button (key) is pressed. Figure 4 shows the button assignments. 1 6 4 16 • •• • • •• • • •• • 5 10 15 20 Top Left = = Bottom Right • Turning on channels 1 through 254 enables transmission (RF or IR) of the respective radio code.
8 AXCESS Programming TX-MLCD Mini-LCD Transmitter Sample Program Figure 5 is a sample demo AXCESS software program for a TX - MLCD . Refer to the AXCESS Language Programming Guide for complete programming instructions.
TX-MLCD Mini-LCD Transmitter AXCESS Programming 9 DEFINE_VARIABLE BA[4] (* LCD VARIABLE FORMAT *) BB[4] BC[2] (* BA BC FILL BD BF *) BD[2] (* BB ( SOURCE ) BE *) BE[4] BF[4] FILL[4] SOURCE[6] BTEMP[4].
10 AXCESS Programming TX-MLCD Mini-LCD Transmitter } PUSH[MLCD,4] TO[MLCD,2] (* MENU SELECTION 2 TRANSMITS RC 2 *) BA='ENT ' BC='<-' FILL='CRSR' BD='->&apo.
TX-MLCD Mini-LCD Transmitter AXCESS Programming 11 TO[MLCD,8] BA='PSE ' BC='<<' FILL='CHPT' BD='>>' BF=' PLY' BB='HOME' SOURCE=&.
12 AXCESS Programming TX-MLCD Mini-LCD Transmitter PUSH[MLCD,2] (*BB*) { TO[MLCD,RC] BTEMP=BB BB='--- ' CALL'LCD' } RELEASE[MLCD,2] { BB=BTEMP CALL'LCD } PUSH[MLCD,6] (*BC*.
TX-MLCD Mini-LCD Transmitter AXCESS Programming 13 PUSH[MLCD,17] (*BE*) { TO[MLCD,RC+5] BTEMP=BE BE=' ---' CALL'LCD' } RELEASE[MLCD,17] { BE=BTEMP CALL'LCD' } (**********.
14 AXCESS Programming TX-MLCD Mini-LCD Transmitter.
TX-MLCD Mini-LCD Transmitter Specifications 15 Specifications Overview Figure 6 shows the TX-MLCD, and Figure 6 lists the specifications. Horizontal LCD SOURCE IBM VHS UMATIC SLIDES MAC CASS LSR DS DU.
16 Specifications TX-MLCD Mini-LCD Transmitter.
TX-MLCD Mini-LCD Transmitter Technical Support 17 Technical Support Overview Before you call AMX for assistance, check your AXlink, power, and cable connections, and the integrity of your software operating system. Reload the software to see if something in the program is causing the problem.
Document No. 034-004-1079 5/92 © 1996 AMX Corporation AMX reserves the right to alter specifications without notice at any time. AMX and the AMX logo are registered trademarks of AMX Corporation. All other trademarks contained in this document are the properties of their respective owners.
An important point after buying a device AMX Mini-LCD Transmitter TX-MLCD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AMX Mini-LCD Transmitter TX-MLCD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AMX Mini-LCD Transmitter TX-MLCD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AMX Mini-LCD Transmitter TX-MLCD you will learn all the available features of the product, as well as information on its operation. The information that you get AMX Mini-LCD Transmitter TX-MLCD will certainly help you make a decision on the purchase.
If you already are a holder of AMX Mini-LCD Transmitter TX-MLCD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AMX Mini-LCD Transmitter TX-MLCD.
However, one of the most important roles played by the user manual is to help in solving problems with AMX Mini-LCD Transmitter TX-MLCD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AMX Mini-LCD Transmitter TX-MLCD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
