Instruction/ maintenance manual of the product GR-AXM341 JVC
Go to page of 32
1 INSTRUCTIONS ENGLISH L YT0898-001A AUTOMA TIC DEMONSTRA TION Automatic Demonstration takes place when “DEMO MODE” is set to “ON” (factory-preset). • Available when the Power Switch 0 is set to “ ” or “ ”. • Performing any operation during the demonstration stops the demonstration temporarily .
2 PROVIDED ACCESSORIES • Battery Pack BN-V1 1U • Lens Cap • Shoulder Strap • Remote Control Unit RM-V715U (GR-AXM541 only) • AAA (R03) Battery x 2 (for Remote Control Unit, GR-AXM541 only) .
3 SAFETY PRECAUTIONS PRECAUTIONS Cassettes marked can be used used with this camcorder . CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
4 The EP A certified RBRC ® Battery Recycling Seal on the nickel-cadmium (Ni-Cd) battery indicates JVC is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States.
5 INDEX A AC Adapter ................................................................. pg. 6 Animation Recording .......................................... pg. 21, 24 Audio Dubbing ......................................................... pg. 24 Auto Date Record .
6 GETTING ST ARTED Hook on. Push in. BA TTERY RELEASE Switch Battery pack Power Switch T o DC IN connector T o AC outlet AC Adapter CHARGING THE BA TTER Y P ACK 1) Hook the end of the battery pack to the camcorder and push the battery in until it locks in place.
7 Y M D T E E O A I X A N Y M I R T E T H DA T E / T I P M M E 2 8 0 J : 0 U 2 2 2 N 8 0 1 0 • During charging or discharging, the camcorder cannot be operated.
8 w t Grip Adjustment 1) Separate the V elcro strip. 2) Pass your right hand through the loop and grasp the grip. 3) Adjust so that your thumb and fingers can easily operate the Recording Start/Stop Button 9 and Power Zoom Lever 3 . Refasten the V elcro strip.
9 @ ! # % *() w q ^& 12 89 0 u i 5 6 7 $ p U O a I P W R Y Q E T o t e 1 R 4 B D 2 E 4 5 1 R E 0 C 4 M / I C M I 2 G C I S N S H O 2 N P T T N 5 W G .
10 1 • MENU Wheel [ – , +] ........................................... pg. 18 • BRIGHT Wheel [ – , +] ......................................... pg. 1 1 • TRACKING Wheel [ – , +] ................................... pg. 14 2 5-Second Recording Button [5 SEC.
11 RECORDING Set REC MODE, T APE LENGTH and DA TE/TIME in SYSTEM MENU. ( pg. 18 – 21, “ MENU SETTINGS ” ) 1 Remove the lens cap. Set the Power Switch 0 to “ ” or “ ” . Shooting while using the viewfinder : Make sure the LCD monitor is closed and locked.
12 BASIC FEA TURES Picture Stabilizer T o compensate for unstable images caused by camera-shake, particularly at high magnification. 1) Press P . ST ABILIZER 4 . 0 appears. 2) T o switch off the Picture Stabilizer , press P . ST ABILIZER 4 . 0 disappears.
13 Zooming T o produce the zoom in/out effect. Digital circuitry extends the maximum magnification offered by optical zoom. This system is called Digital Zoom. • Slide the Power Zoom Lever 3 towards “ T ” to zoom in, or “ W ” to zoom out. • The further you slide the Power Zoom Lever 3 , the quicker the zoom action.
14 T racking Eliminates noise bars that appear on-screen during playback. T o activate Manual T racking: 1) Press the TRACKING Wheel 1 for approx. 2 seconds. “ MT ” r appears. 2) Rotate the TRACKING Wheel 1 so that the noise bars disappear . • T o return to Auto T racking, press the TRACKING Wheel 1 for approx.
15 Connections T o A TV/VCR 1) Make sure all units are turned off. 2) Connect the camcorder to a TV or VCR using optional video and audio cables. If using both TV and VCR, connect the VCR output to the TV input. 3) T urn on all units. Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.
16 Using The Cassette Adapter (VHS Playpak) Use this to play back an VHS-C video cassette recorded with this camcorder on a VHS VCR. 1) Slide the battery cover up to remove it, install one “ AA (R6) ” size battery , then reattach the cover .
17 INSTRUCTIONS @ ! # % *() w q ^& 12 89 0 u i 5 6 7 $ p U O a I P W R Y Q E T o t e 1 R 4 B D 2 E 4 5 1 R E 0 C 4 M / I C M I 2 G C I S N S H O 2 N P T T N 5 W G .
18 3 Press the MENU Wheel 1 in to display the Setting Menu and rotate it to select the desired setting. 4 Press the MENU Wheel 1 in. The Menu Screen reappears with the highlight bar on “ 4 RETURN ” . Press the MENU Wheel 1 in. The normal screen reappears.
19 M.W .B. If the white balance is correct, all other colors will be accurately reproduced. AUTO : White balance is adjusted automatically . FINE : Outdoors on a sunny day . CLOUD : Outdoors on a cloudy day . HALOGEN : A video light or similar type of lighting is used.
20 SYSTEM MENU This Menu Screen cannot be accessed while recording. REC MODE Allows you to set the recording mode. “ EP ” (Extended Play) is more economical, providing three times the recording time. • If the recording mode is switched during recording, the playback picture will be blurred at the switching point.
21 T APE LENGTH Allows you to set the tape length depending on the tape used: T20=20 minutes, T30=30 minutes, T35=35 minutes, T40=40 minutes. • T ape remaining time 1 is correct only if the correct tape length has been selected. DISPLA Y FULL: Makes all of the indications appear on the LCD monitor/viewfinder during playback or recording.
22 ADV ANCED FEA TURES Fade/Wipe Effects Fade- or wipe-in works at recording start, and fade- or wipe-out works at recording end. 1) Set the Power Switch 0 to “ ” . 2) Press F ADE/WIPE * repeatedly until the desired mode appears. 3) Press the Recording Start/Stop Button 9 to activate fade-in/out or wipe-in/out.
23 Program AE With Special Ef fects 1) Set the Power Switch 0 to “ ” . 2) Press P .AE ( repeatedly until the desired mode appears. • T o cancel the effect, press P .AE ( repeatedly until “ OFF ” appears. • Only one mode can be engaged at a time.
24 Animation And Time-Lapse The remote control lets you set/release interval time and recording time without setting REC TIME/ INT . TIME ( pg. 21) in SYSTEM MENU. Animation Each time ANIM. Y is pressed, the recording time changes in the following order: 1/4S, 1/2S, 1S, 5S and no indication (off).
25 TROUBLESHOOTING Before consulting your JVC dealer , please check the following to see if you can correct the problem yourself. Vertical white lines appear when shooting a very bright object. • This sometimes occurs when the contrast between the back-ground and the object is great.
26 .... avoid prolonged uncharged storage. .... remove from charger or powered unit when not in use, as some machines use current even when switched off. • It is normal for the battery pack to be warm after charging, or after use. T emperature Range Specifications Charging .
27 • Avoid using strong cleaning agents such as benzine or alcohol. • Cleaning should be done only after the battery pack has been removed or other power units have been disconnected. • Mold may form if the lens is left dirty . • When using a cleaner or chemically treated cloth, refer to the cautions that came with it.
28 SPECIFICA TIONS Camcorder General Format : VHS NTSC standard Power source : DC 1 1 V (Using AC Adapter) DC 6 V (Using battery pack) Power consumption Viewfinder on : 4.
29 Tiempo de grabaci ó n aproximado (unidad: min) ( ): cuando el foco de video est á encendido Bater í a BN-V1 1U BN-V12U (opcional) BN-V20U (opcional) BN-V400U (opcional) Visor conectado 95 (50) 9.
30 • Durante la carga o descarga, la c á mara de video no puede ser operada. • No es posible efectuar la carga o descarga si se utiliza un tipo de bater í a equivocado. • Cuando efect ú e la carga de la bater í a por primera vez o despu é s de un largo periodo de almacenamiento, la l á mpara CHARGE ^ puede no se encender .
31 ESP A Ñ OL — GUIA P ARA OPERACION RAPIDA Si la unidad comienza a funcionar mal, deje de usarla inmediatamente y consulte a su concesionario local de JVC. w t Colocaci ó n/Extracci ó n de un cassette 1) Abra completamente el monitor LCD. Deslice EJECT w hasta que el compartimiento de cassete se abra.
32 REPRODUCCI Ó N 1) Cargue una cinta. 2) Ajuste el conmutador de alimentaci ó n 0 en . Para iniciar la reproducci ó n, presione 4 / 6 $ o W . Para interrumpir moment á neamente (reproducci ó n de im á genes fijas), presione 4 / 6 $ o O . Para interrumpir la reproducci ó n, presione 5 @ .
An important point after buying a device JVC GR-AXM341 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC GR-AXM341 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC GR-AXM341 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC GR-AXM341 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC GR-AXM341 will certainly help you make a decision on the purchase.
If you already are a holder of JVC GR-AXM341, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC GR-AXM341.
However, one of the most important roles played by the user manual is to help in solving problems with JVC GR-AXM341. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC GR-AXM341 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
