Instruction/ maintenance manual of the product GR-AXM33 JVC
Go to page of 52
G R-A XM33 G R-A XM23 COMP ACT VHS CAMCORDER INSTRUCTIONS LYT0038-001A Com pa ct VHS P AL GETTING ST ARTED 6 RECORDING 14 Basic Recording ...................... 14 Basic Features ........................ 18 Advanced Features .................. 22 Programme AE With Special Ef fects .
2 EN Dear Customer , Thank you for purchasing the JVC Compact VHS camcorder . Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new camcorder .
EN 3 This camcorder is designed to be used with P AL-type colour television signals. It cannot be used for playback with a television of a different standard.
4 EN MAJOR FEA TURES REMEMBER Programme AE with Special Effects ( Z pg. 22) n Auto Mode Lock n Auto Mode Release n Electronic Fog Filter n ND Ef fect n Sepia n T wilight n Sports n 1/1000 sec. High Speed Shutter n 1/2000 sec. High Speed Shutter 22 x Optical Hyper Zoom ( Z pg.
EN 5 2 1 3 3 4 2 1 Using the battery pack 1 Hook-on the battery pack’ s top end to the camcorder . (Charging procedure, Z pg. 6) 2 Push in the battery pack until it locks into place. T o remove the battery pack Slide BA TT . RELEASE and pull out the battery pack.
6 EN 1 1 2 GETTING ST ARTED Power This camcorder’s 3-way power supply system lets you choose the most appropriate source of power . NOTES: ● No function is available without power supply . ● Use only specified power supply . ● Do not use provided power supply units with other equipment.
EN 7 CHARGE MARKER A charge marker is provided on the battery pack to help you remember whether it has been charged or not. T wo colours are provided (red and black)—you choose which one means char ged and which means dischar ged.
8 EN GETTING ST ARTED (cont.) Clock (Lithium) Battery Inser tion/Removal This battery is necessary for clock operation and to perform date/time settings. SWITCH OFF POWER 1 Switch off the unit’ s power and remove the power supply unit. OPEN COVER 2 Open the clock battery compartment cover while pressing the release tab.
EN 9 Date/T ime Setting ACCESS MENU SCREEN 1 First set the Power Switch to “CAMERA”. T urn the Select Dial to any position except AUTO LOCK, then press the MENU Jog Dial. SELECT FUNCTION 2 Rotate the MENU Jog Dial to move the highlight bar to “DA TE/TIME”, then press it.
10 EN GETTING ST ARTED (cont.) T ape Length Setting Set the tape length according to the length of the tape used. ACCESS MENU SCREEN 1 First set the Power Switch to “CAMERA”. T urn the Select Dial to any position except AUT O LOCK, then press the MENU Jog Dial.
EN 11 1 2 2 3 3 4 4 5 Loading/Unloading A Cassette OPEN LCD MONITOR 1 Open the LCD monitor to an angle of over 45 degrees. OPEN CASSETTE HOLDER 2 Press EJECT until the holder opens. Do not use force to open. INSER T/REMOVE CASSETTE 3 Make sure the label is facing outward.
12 EN GETTING ST ARTED (cont.) Grip Adjustment EXP AND LOOP 1 Separate the V elcro strip. INSER T HAND 2 Pass your right hand through the loop and grasp the grip. ADJUST STRAP LENGTH 3 Adjust so your thumb and fingers can easily operate the Recording Start/Stop Button and Power Zoom Button.
EN 13 CAUTION: When using a tripod, be sure to open and extend its legs fully to stabilize the camcorder . T o prevent damage to the unit caused by falling over , do not use a small-sized tripod.
14 EN RECORDING Basic Recording NOTE: Y ou should already have performed the procedures listed below . If not, do so before continuing. ● Power ( Z pg. 6) ● T ape Length Setting ( Z pg. 10) ● Recording Mode Setting ( Z pg. 10) ● Grip Adjustment ( Z pg.
EN 15 STOP RECORDING 4 Press the Recording Start/Stop Button again to stop recording. • The camcorder re-enters the Record-Standby mode. NOTES: ● When the Power Switch is set to CAMERA and the LCD monitor is opened at an angle of 45 degrees or more, the LCD monitor switches on and the viewfinder switches off automatically to save power .
16 EN RECORDING Basic Recording (cont.) Shooting while watching the LCD monitor Before the following steps, perform step 1 ( Z pg. 14). ENTER RECORD–ST ANDBY MODE 2 Make sure the LCD monitor is fully open. Slide the LENS COVER Open/Close Switch to open the lens cover , then set the Power Switch to CAMERA.
EN 17 Journalistic shooting In some situations different angles of shooting may be required for more dramatic results. OPEN LCD MONITOR 1 Make sure the LCD monitor is fully open. TIL T LCD MONITOR 2 T ilt the LCD monitor in the most convenient direction.
18 EN RECORDING Basic Features FEA TURE: Zooming PURPOSE: T o produce the zoom in/out effect, or an instantaneous change in image magnification. OPERA TION: Zoom In Press the “T” of the Power Zoom Button. Zoom Out Press “W” of the Power Zoom Button.
EN 19 FEA TURE: Quick Review PURPOSE: T o check the end of the last record- ing. OPERA TION: 1) Press “ ” and release quickly during the Record–Standby mode. n T ape is rewound for about 2 seconds and played back automatically , then pauses in Record–Standby mode for the next shot.
20 EN RECORDING Basic Features (cont.) FEA TURE: Video Light (GR-AXM33 only) PURPOSE: T o brighten the scene when natural lighting is too dim. OPERA TION: 1) Set the LIGHT OFF/AUTO/ON Switch as required: ON : Always keeps the light on as long as the camcorder is turned on.
EN 21 Auto Date Record mode Date-off mode (No display) Date display Time display Date/Time display The characters you have set using Character Generator ( Z pg. 26) 22:50:00 Date display Time display Date/Time display 25.12.98 25.12.98 22:50:00 Auto date record mode Auto date record executed 25.
22 EN 1 / 1 0 0 0 1 / 2 0 0 0 F G N D A U T O M O D E L O C K R E L E A S E SEPIA Programme AE With Special Effects All you have to do to access any of the variety of shooting effects is to turn the Select Dial. SELECT MODE 1 T urn the Select Dial until the symbol of the function you want is aligned with the mark.
EN 23 Dial LCD monitor/ Mode symbol Viewfinder indication Auto Mode Lock LOCK AUTO LOCK Auto Mode Lock Locks the camcorder in Full Auto mode, preventing incorrect operation due to accidental button pressing during shooting. • In this mode the following controls are disabled; DA TE/TIME display select, and the Menu Jog Dial.
24 EN RECORDING Advanced Features (cont.) FADER 4 EFFECT Fade-in Fade-out Fader This feature allows smooth fade-in and fade-out to black blank screen. Fade-in works at recording start, and fade- out works at recording end or when you enter Record- Standby mode.
EN 25 4 S.L X MAX MAX NORM OFF LCD monitor or viewfinder Super LoLux(Gain Up) Bright, natural recordings can be taken even in areas with low or poor lighting. SELECT SUPER LOLUX MODE 1 Press SUPER LOLUX repeatedly to cycle through the modes as shown to the left.
26 EN MENU MENU 4 MENU END FOCUS EXPOSURE DATE T IME TELE MACRO TAPE LENGTH M. W. B. ZOOM SPEED 4 NE X T AUTO AUTO 25. 12. 98 OFF T30 AUTO FAST 4 BACK REC T IME INT.
EN 27 Using Menu For Detailed Adjustment This camcorder is equipped with an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings. ACCESS MENU SCREEN 1 T urn the Select Dial to any position except AUT O LOCK, then press the MENU Jog Dial.
28 EN RECORDING Advanced Features (cont.) Adjusts focus automatically . Allows you to adjust focus manually ( Z pg. 30, 31). Adjusts exposure automatically . Allows you to adjust exposure manually ( Z pg. 32). Allows you to set the current date and time ( Z pg.
EN 29 This feature allows you to set the parameters for Animation and T ime-Lapse recording ( Z pg. 35). This feature allows you to set the parameters for Self-T imer ( Z pg. 34) and T ime- Lapse recording ( Z pg. 35). The tally lamp comes on to signal the start of recording.
30 EN RECORDING Advanced Features (cont.) Focusing Auto Focus The camcorder’s Full Range AF system offers continuous shooting ability from close-up to infinity . However , correct focus may not be obtainable in the situations listed below (in these cases use manual focusing): • When two subjects overlap in the same scene.
EN 31 MENU 4 MENU END FOCUS EXPOSURE DATE T IME TELE MACRO TAPE LENGTH M. W. B. ZOOM SPEED 4 NE X T AUTO AUTO 25. 12. 98 OFF T30 AUTO FAST AUTO MANU EX I T FOCUS Manual Focus NOTE: Y ou should already have made the necessary viewfinder adjustments ( Z pg.
32 EN RECORDING Advanced Features (cont.) Exposure Control This feature automatically adjusts the iris for the best available picture quality , but you can override and make the adjustment manually . ACCESS MENU SCREEN 1 T urn the Select Dial to any position except AUTO LOCK, then press the MENU Jog Dial.
EN 33 Manual White Balance Adjustment (M.W .B.) The white balance is usually adjusted automatically . However , the more advanced camcorder operator would prefer to control this function manually and achieve a more professional colour/tint reproduction.
34 EN RECORDING Advanced Features (cont.) Self-Timer Y ou can set the delay between pressing the Recording Start/Stop Button and the actual start of recording. If you secure the camcorder , you (or whomever is operating the camcorder) can enter the scene before recording starts.
EN 35 Animation Give stationary scenes or objects an illusion of movement. This function allows you to shoot a series of pictures, each slightly different, of the same object for a brief period of time. NOTE: Make sure the camcorder is in the Record-Standby mode and the recording mode is set to “SP” before performing the following steps.
36 EN M–0: 23 : 45 SP 4 PLA YBACK Basic Playback PLA Y/P AUSE STOP FF REW LCD Monitor in Retracted Position LOAD A CASSETTE 1 First open the LCD monitor to an angle of over 45 degrees. Press EJECT to open the cassette holder , then insert the cassette with the label facing out.
EN 37 AT PLA YBACK Features Adjust the brightness of the LCD monitor T o brighten the image, turn the BRIGHT Dial towards “ + ”. T o darken the image, turn the Dial towards “ – ”. Speaker volume control Y ou can adjust the speaker volume by turning the VOLUME Dial.
38 EN PLA YBACK Featur es (cont.) FEA TURE: Still Playback PURPOSE: T o pause during playback. OPERA TION: 1) Press PLAY/P AUSE during playback. 2) T o resume normal playback, press PLA Y/P AUSE again. NOTE: Noise bars appear and pictures may become monochrome during Still Playback.
EN 39 PLA YBACK Using The Cassette Adapter Cassette Adapter Use this to play back a VHS-C video cassette recorded with this camcorder . It is fully compatible with any VHS video cassette recorder . The C-P7U adapter is battery powered and automatically performs tape loading and unloading.
40 EN There are three basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals. Connection T o A VCR A (Editing, Dubbing and Playback) NOTE: Use the optional Audio and V ideo cables.
EN 41 T APE DUBBING T ape Dubbing CONNECT EQUIPMENT 1 Following the illustration to the left, connect the camcorder and the VCR. PREP ARE FOR DUBBING 2 Set the camcorder ’ s Power Switch to “PLA Y”, turn on the VCR’ s power , and insert the appropriate cassettes in the camcorder and the VCR.
42 EN USER MAINTENANCE After Use 1 Set the Power Switch to “POWER OFF” to turn off the camcorder . 2 Press EJECT to open the cassette holder , then remove the cassette. 3 Close and lock the cassette holder by pressing PUSH . 4 Close and lock the LCD monitor .
EN 43 TROUBLESHOOTING SYMPTOM POSSIBLE CAUSE(S) POWER RECORDING PLA YBACK T APE TRANSPORT No power is supplied. The power suddenly goes off and doesn’ t come back on by itself. Recording cannot be performed. Recording does not start. The tape is running, but there’ s no playback picture.
44 EN SYMPTOM POSSIBLE CAUSE(S) OTHER The camcorder is a microcomputer -controlled device. External noise and interference (from a TV , a radio, etc.) might prevent it from functioning properly . In such cases, first disconnect its power supply unit (battery pack, AC Power Adapter/Battery Char ger , etc.
EN 45 REC SP 30MIN 444 4 S.L X T 3 0 01 MWB NORM 5MIN 1 4S LENS COVER PAUSE MERRY CHRISTMAS TAPE END 1 * 6 * 7 2 3 4 5 % * ^ & 9 $ 0 # ( * ) 8 ! @ T WILIGHT 25. 12. 98 2 2:5 0:0 0 INDEX LCD monitor/Viewfinder Indications # Instant T itle Display .
46 EN INDEX (cont.) 3 2 o W E p U I Q 1 % ( ) q # $ @ ! w ^ R e r t y & Y * i u T O 0 8 9 7 4 5 6.
EN 47 Controls 1 Power Zoom Button ........................... Z pg. 18 2 Multi-Function Control • EFFECT Button ................................. Z pg. 24 • WIDE Button ................................... Z pg. 24 • TITLE Button ...............
48 EN INDEX T erms A AC Power Adapter .................................. pg. 6 Animation Recording .............................. pg. 35 Auto Date Record ................................... pg. 21 Auto Focus ...........................................
EN 49 NOTES: ● It is normal for the battery pack to be warm after charging, or after use. T emperature Range Specifications Charging ........................... 10°C to 35°C Operation ......................... 0°C to 40°C Storage ...............
50 EN CAUTIONS (cont.) 3. DO NOT leave the unit . . . ..... in places of over 50°C. ..... in places where humidity is extremely low . (below 35%) or extremely high (above 80%). ..... in direct sunlight. ..... in a closed car in summer . ..... near a heater .
EN 51 SPECIFICA TIONS GENERAL Format : VHS P AL standard Power sour ce : DC 6V Power consumption LCD monitor off, viewfinder on : 5.9 W LCD monitor on, viewfinder off : 6.
G R-AXM33 G R-AXM23 COPYRIGHT© 1998 VICTOR COMPANY OF JAPAN, LTD. EK Printed in Japan 0198MKV * UN * VP VICTOR COMP ANY OF JAPAN, LIMITED.
An important point after buying a device JVC GR-AXM33 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC GR-AXM33 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC GR-AXM33 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC GR-AXM33 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC GR-AXM33 will certainly help you make a decision on the purchase.
If you already are a holder of JVC GR-AXM33, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC GR-AXM33.
However, one of the most important roles played by the user manual is to help in solving problems with JVC GR-AXM33. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC GR-AXM33 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
