Instruction/ maintenance manual of the product GR-AXM307EG JVC
Go to page of 46
2 EN Dear Customer , Thank you for purchasing the JVC Compact VHS camcorder . Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new camcorder . W arning on lithium battery The battery used in this device may present a fire or chemical burn hazard if mistreated.
EN 3 n LCD Colour Monitor ( Z pg. 12) n Programme AE with Special Effects ( Z pgs. 16, 17) • Auto Mode Lock • Auto Mode Release • Electronic Fog Filter • ND Ef fect • Sepia • T wilight • Sports • 1/1000 sec. High Speed Shutter • 1/2000 sec.
4 EN GETTING ST ARTED REFRESH indicator REFRESH switch Power This camcorder’ s 3-way power supply system lets you choose the most appropriate source of power . NOTES: ● No function is available without power supply . ● Use only specified power supply .
EN 5 NOTES: ● The recording time per char ge is affected by such factors as the time spent in Record/Standby mode and the frequency of zooming. It is safer to have spare battery packs. ● Char ging times noted on page 4 are for fully discharged battey pack, and discharging times are for fully charged battery pack.
6 EN GETTING ST ARTED (cont.) Clock (Lithium) Battery Inser tion/Removal This battery is necessary for clock operation and to perform date/time settings. SWITCH OFF POWER 1 Switch off the unit’ s power and remove the power supply unit. OPEN COVER 2 Open the clock battery compartment cover while pressing the release tab.
EN 7 SET CANCEL 1.1.00 10:45 GAIN UP S.LX TELE MACRO OFF INTERVAL TIMER OFF REC TIME OFF JLIP ID NO. 07 SET CHARACTER DATE/TIME END :MENU KEY Date/T ime Setting SELECT MODE 1 First set the power switch to “CAMERA”.
8 EN SP LP T30 T30 T45 T60 SP GETTING ST ARTED (cont.) T ape Length Setting Set the tape length according to the length of the tape used. SET T APE LENGTH 1 Press T30•45•60 until the required indication appears in the LCD monitor or the veiwfinder .
EN 9 Grip Adjustment EXP AND LOOP 1 Separate the V elcro strip. INSER T HAND 2 Pass your right hand through the loop and grasp the grip. ADJUST STRAP LENGTH 3 Adjust so your thumb and fingers can easily operate the Recording Start/Stop button and Power Zoom lever .
10 EN RECORDING Basic Recording NOTE: Y ou should already have performed the procedures listed below . If not, do so before continuing. ● Power ( Z pg. 4) ● T ape Length Setting ( Z pg. 8) ● Recording Mode Setting ( Z pg. 8) ● Grip Adjustment ( Z pg.
EN 11 25MIN 120MIN 119MIN 3MIN 2MIN *- - -MIN 1MIN 0MIN STOP RECORDING 4 Press the Recording Start/Stop button again to stop recording. • The camcorder re-enters the Record-Standby mode.
12 EN 25MIN 120MIN 119MIN 3MIN 2MIN *- - -MIN 1MIN 0MIN RECORDING Basic Recording (cont.) Shooting while watching the LCD monitor Before the following steps, perform step 1 ( Z pg. 10). ENTER RECORD-ST ANDBY MODE 2 Make sure the LCD monitor is fully open.
EN 13 Journalistic shooting In some situations different angles of shooting may be required for more dramatic results. OPEN LCD MONITOR 1 Make sure the LCD monitor is fully open. TIL T LCD MONITOR 2 T ilt the LCD monitor in the most convenient direction.
14 EN RECORDING Basic Features FEA TURE: Zooming PURPOSE: V aries the focal length of the lens and produces the zoom in/out effect. OPERA TION: Zoom In 1) Push the power zoom lever down toward “T”. Zoom Out 1) Push the lever up toward “W”. NOTES: ● The further the power zoom lever is pushed, the faster the zoom speed becomes.
EN 15 Video Light When natural lighting is too dim, you can brighten the scene by using the built-in video light. SET VIDEO LIGHT 1 Set the LIGHT OFF/AUTO/ON as required. ON : Always keeps the light on as long as the camcorder is turned on. AUTO : Automatically turns on the light when the camcorder senses insufficient lighting on the subject.
16 EN 1 / 1 0 0 0 1 / 2 0 0 0 F G N D A U T O M O D E L O C K R E L E A S E SEPIA RECORDING Advanced Features Programme AE With Special Effects All you have to do to access any of the variety of shooting effects is to turn the PROGRAM AE select dial.
EN 17 Dial LCD monitor/ Mode symbol V iewfinder indication T wilight Dusk, twilight scenery , fireworks, etc., look more natural and dramatic. The following happens when T wilight mode is selected: • Auto gain control is turned off. • White Balance is set to “ ” (outdoor mode), but can also be manually changed to another mode ( Z pg.
18 EN RECORDING Advanced Features (cont.) Focusing Auto Focus The camcorder’s Full Range AF system offers continuous shooting ability from close-up to infinity . However , correct focus may not be obtainable in the situations listed below (in these cases use manual focusing): • When two subjects overlap in the same scene.
EN 19 Manual Focus NOTE: Y ou should already have made the necessary viewfinder adjustments ( Z pg. 6). If you haven’t, do so before continuing. SELECT MODE 1 T urn the PROGRAM AE select dial to any position except AUTO LOCK. ADJUST FOCUS 2 T o farther subject .
20 EN FADE FADE RECORDING Advanced Features (cont.) Fader This feature allows smooth fade-in and fade-out to black blank screen. Fade-in works at recording start, and fade-out works at recording end or when you enter Record–Standby mode. SELECT MODE 1 T urn the PROGRAM AE select dial to any position except AUTO LOCK.
EN 21 TITLE HAPPY BIRTHDAY HAPPY HOLIDAYS OUR FAMILY MOVIE STAR PARTY TIME MERRY CHRISTMAS WEDDING DAY CONGRATULATIONS GAIN UP S.LX TELE MACRO OFF INTERVAL TIMER OFF REC TIME OFF JLIP ID NO.
22 EN DISP. Auto Date Record mode Date display Date/Time display Character Generator Date-off mode Date display Auto Date Record mode Date/Time display Character Generator Auto date record mode Auto date record executed No Characters stored Example of stored characters 25.
EN 23 M.W.B. MWB MWB Manual White Balance Adjustment (M.W .B.) This camcorder’s Automatic Colour T emperature system senses the colour temperature of the ambient lighting for automatic white balance adjustment.
24 EN Using Menu For Detailed Adjustment This camcorder is equipped with an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings. SELECT MODE 1 T urn the PROGRAM AE select dial to any position except AUT O LOCK.
EN 25 MENU GAIN UP S.LX T o record a subject in a dark lit environment. When it is more convenient to shoot the subject with a brighter image even if the picture becomes slightly coarse. Automatically selected when the PROGRAM AE select dial is set to AUT O LOCK mode.
26 EN 1MIN 1/2S GAIN UP S.LX TELE MACRO OFF INTERVAL TIMER OFF REC TIME OFF JLIP ID NO. 07 SET CHARACTER DATE/TIME END :MENU KEY OFF 15S 30S 1MIN 5MIN OFF 1/4S 1/2S 1S RECORDING Advanced Features (cont.
EN 27 Animation Give stationary scenes or objects an illusion of movement. This function allows you to shoot a series of pictures, each slightly different, of the same object for a brief period of time. NOTE: Make sure the camcorder is in the Record-Standby mode and the recording mode is set to “SP” before performing the following steps.
28 EN M-1:23:45 LP PLA YBACK Basic Playback LOAD A CASSETTE 1 First slide MONIT OR OPEN and open the LCD monitor to an angle of over 45 degrees. Press EJECT to open the cassette holder , then insert the cassette with the label facing out. Press PUSH to ensure the holder is closed and locked.
EN 29 FEA TURE: Manual T racking PURPOSE: T o eliminate noise bars that appear on the screen during playback. OPERA TION: 1) Press either +/– button as many times as necessary for best picture. NOTES: ● T o reset TRACKING to the original preset, press both + and – buttons simultaneously .
30 EN PLA YBACK Basic Connections There are three basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals. Connection T o A VCR [A] (Editing, Dubbing and Playback) NOTE: Use the provided Audio and V ideo cables.
EN 31 PLA YBACK Using The Cassette Adapter Cassette Adapter Use this to play back a VHS-C video cassette recorded with this camcorder . It is fully compatible with any VHS video cassette recorder . The C-P7U adapter is battery powered and automatically performs tape loading and unloading.
32 EN EDITING T ape Dubbing CONNECT EQUIPMENT 1 Following the illustration at left, connect the camcorder and the VCR. PREP ARE FOR DUBBING 2 Set the camcorder ’ s Power switch to “PLA Y”, turn on the VCR’ s power , and insert the appropriate cassettes in the camcorder and the VCR.
EN 33 1 2 3 4 5 6 7 8 9 0 VCR BRAND NAME BUTTONS (A) (B) 6 2 6 4 7 7 MITSUBISHI 6 7 6 8 NEC 3 7 3 8 GRUNDIG 1 4 3 4 HITACHI 6 6 6 3 PANASONIC 1 3 1 7 1 1 9 4 1 8 JV.
34 EN A B C IN OUT ç© 1 0:00:25 2 3 4 5 6 7 8 COUNTER 0:00:25 TOTAL 0:00:00 IN OUT ç 1 0:00:25 0:01:05 2 0:03:18 0:03:31 3 0:02:33 0:02:53 © 4 0:04:11 5 6 7 8 COUNTER 0:04:11 TOTAL 0:01:13 EDITING (cont.
EN 35 1 3 2 IN OUT IN OUT IN OUT ORIGINAL T APE (camcorder) AUTOMA TIC EDITING TO VCR ENGAGE VCR’S RECORD-P AUSE MODE 1 Point the remote control toward the VCR’ s infrared sensor and press VCR REC STBY , or manually engage the VCR’ s Record-Pause mode.
36 EN A B 1 2 3 4 5 6 7 8 9 0 ! # @ $ % ^ & USING REMOTE CONTROL UNIT The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (PLA Y , STOP , P AUSE, FF , and REW) of your VCR. This remote control unit makes additional recording functions possible.
EN 37 1MIN INDEX 1/2S 15 ° 5m(16.4ft) 15 ° 30 ° 30 ° ST ART/STOP VISS REC TIME INT . TIME FEATURE: Self-Timer , Animation and T ime-Lapse PURPOSE: The remote control lets you set/release Interval T imer and Rec Time functions as well as the Menu screen.
38 EN USING REMOTE CONTROL UNIT (cont.) Insert Editing Y ou can record a new scene into a previously recorded tape, replacing a section of the original recording with minimal picture distortion at the in- and out-points. The original audio remains unchanged.
EN 39 M-0:05:20 e Audio Dubbing Y ou can record a new soundtrack on a prerecorded tape (normal audio only). ** Perform steps 1 , 2 and 3 of the Insert Editing procedure ( Z pg.
40 EN TROUBLESHOOTING SYMPTOM No power is supplied. The power suddenly goes off and doesn’t come back on by itself. Recording cannot be performed. Recording does not start. The tape is running, but there’ s no playback picture. Noise bars appear in the playback picture.
EN 41 SYMPTOM The tape won’t eject. Some functions are not available. V ertical white lines appear when shooting a very bright object. Bright, crystal-shaped spots appear in the LCD monitor and the viewfinder. The picture is blurred in the Quick Review or Retake mode.
42 EN INDEX Controls E y T Q R e 2 4 6 0 ! 3 5 7 9 q * ( ) w r t f o u i ^ O & W a P s p U I Y 8 1 @ $ % # d.
EN 43 Controls 1 MONITOR OPEN Switch .................... Z pg. 12 2 REW Button ....................................... Z pg. 28 RET AKE R [Quick Review] Button ....... Z pg. 14 3 FF Button ........................................... Z pg. 28 RET AKE F Button .
44 EN INDEX LCD monitor/Viewfinder 10 : 24 25 . 12 . 97 ME RR Y CH R I ST M A S TAPE END – 05 MWB DISP. REC SP SEPIA LENS COVER FADE 18MIN T30 1MIN 1/2S INDEX PA U S E 8 9 0 1 * 6 * 7 % * & ^ * ( ) q ! # $ @ 4 3 5 e w 2 * LCD monitor/Viewfinder Indications 1 * Cassette W arning/Remaining T ape Time .
EN 45 CAUTIONS DANGER: Video Light • The video light becomes extremely hot. Do not touch it either while in operation or soon after turning it off, otherwise serious injury may result. • Do not place the camcorder into the carrying case immediately after using the video light, since it remains extremely hot.
46 EN CAUTIONS (cont.) For Y our Maintenance 1. After Use 1 Set the power switch to POWER OFF to turn off the camcorder . 2 Press EJECT to open the cassette holder , then remove the cassette. 3 Close and lock the cassette holder by pressing PUSH. 4 Close and lock the LCD monitor .
EN 47 SPECIFICA TIONS GENERAL Format : VHS P AL standard Power sour ce : DC 6 V Power consumption LCD monitor off, viewfinder on : 6.3 W LCD monitor on, viewfinder off : 6.
An important point after buying a device JVC GR-AXM307EG (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC GR-AXM307EG yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC GR-AXM307EG - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC GR-AXM307EG you will learn all the available features of the product, as well as information on its operation. The information that you get JVC GR-AXM307EG will certainly help you make a decision on the purchase.
If you already are a holder of JVC GR-AXM307EG, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC GR-AXM307EG.
However, one of the most important roles played by the user manual is to help in solving problems with JVC GR-AXM307EG. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC GR-AXM307EG along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
