Instruction/ maintenance manual of the product GR-AXM220 JVC
Go to page of 48
LYT0478-001B EN C O M P A C T V H S C A M C O R D E R INSTRUCTIONS G R - A X M 2 2 0 For Customer Use: Enter below the Model No. and Serial No. which is located on the bottom of cabinet. Retain this information for future reference. Model No. Serial No.
2 EN Using This Instruction Manual • All major sections and subsections are listed in the T able Of Contents on the cover . • Notes appear after most subsections. Be sure to read these as well. • Basic and advanced features/operation are separated for easier reference.
EN 3 When the equipment is installed in a cabinet or on a shelf, make sure that is has sufficient space on all sides to allow for ventilation (10 cm (3-15/16") or more on both sides, on top and at the rear). Do not block the ventilation holes. (If the ventilation holes are blocked by a newspaper , or cloth etc.
4 EN 5. V entilation Slots and openings in the cabinet are provided for ventilation. T o ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. • Do not block the openings by placing the product on a bed, sofa, rug or other similar surface.
EN 5 USE 1. Accessories T o avoid personal injury: • Do not place this product on an unstable cart, stand, tripod, bracket or table. It may fall, causing serious injury to a child or adult, and serious damage to the product. • Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product.
6 EN A B 3 1 2 3 2 1 Using the battery pack Hook its end to the camcorder and push the battery pack in until it locks in place . (Charging procedure, Z pg. 8) T o remove the battery pack Slide BA TTERY RELEASE and pull out the battery pack. QUICK OPERA TION GUIDE 1 Set the Power Switch to “PLA Y”.
EN 7 MAJOR FEA TURES Cassettes marked can be used with this camcorder . Program AE with Special Effects ( Z pg. 19) n Electronic Fog Filter n ND Ef fect n Sepia n T wilight n Sports n Nega/Posi n 1/2000 sec. High Speed Shutter Picture Stabilizer ( Z pg.
8 EN GETTING ST ARTED Power This camcorder’s 3-way power supply system lets you choose the most appropriate source of power . Do not use provided power supply units with other equipment. CHARGING THE BA TTERY P ACK 1 Make sure you unplug the camcorder ’ s DC cord from the AC Power Adapter/Charger .
EN 9 A B A TTENTION: Before detaching the power source, make sure that the camcorder ’ s power is turned off. Failure to do so can result in a camcorder malfunction. USING THE BA TTERY P ACK Hook its end to the camcorder and push the battery pack in until it locks in place .
10 EN Clock (Lithium) Battery Insertion/Removal This battery is necessary for clock operation and to perform date/time settings. 1 Switch off the unit’ s power and remove the power supply unit (battery pack, AC Power Adapter/Battery Charger , etc.).
EN 11 4 R I T D J D 4 B E N I A L E R A C T T T I M E C . L E P O T K T E / U I T T I M R M I L I D O N E M A M D E N E N E G O . . O O E 0 O F F N 6 F F F G F LIS H Y M D T E E O A I X A N Y M I R T E T H DA T E / T I M P E M 2 8 0 J : 0 U 2 2 0 N 8 0 4 R I T D J D 4 B E N I A L E R A C T T T I M E C .
12 EN Recording Mode Setting Set depending on your preference. 1 Set the Power Switch to “AUT O” or “PRO.”. Press SP/ EP for more than 1 second. “SP” (Standard Play) provides higher picture and sound quality and is better for dubbing, while “EP” (Extended Play) is more economical, providing three times the recording time.
EN 13 1 3 3 2 2 180 ° 180 ° 2 3 1 4 PAUSE Power Zoom Lever Recording Start/Stop Button Set to “CAMERA” (“AUTO” or “PRO.”). Grip Adjustment 1 Separate the V elcro strip.
14 EN 180 ° 90 ° BR I G H T – ––––– 6 ––––– + 25 MI N 120MIN 3MIN 2MIN MIN 119MIN 1MIN 0MIN NOTE: Y ou should already have performed the procedures listed below . If not, do so before continuing. ● Power ( Z pg. 8) ● Recording Mode Setting ( Z pg.
EN 15 NOTES: ● When the Power Switch is set to CAMERA and the LCD monitor is opened at an angle of 60 degrees or more, the LCD monitor switches on and the viewfinder switches off automatically to save power . ● The cassette holder cannot be opened unless a power supply is attached.
16 EN 1X Zoom in (T : T elephoto) Zoom out (W: Wide angle) Power Zoom Lever Zoom indicator bar FEA TURE: Zooming PURPOSE: T o produce the zoom in/out effect, or an instantaneous change in image magnification. Digital circuitry extends the maximum magnification offered by optical zoom.
EN 17 5S PAUSE FEA TURE: Quick Review PURPOSE: T o check the end of the last recording. OPERA TION: 1) Set the Power Switch to “CAMERA” (“AUT O” or “PRO.”). 2) Press 2 and release quickly during the Record– Standby mode. n T ape is rewound for approx.
18 EN Fade/Wipe Effects These effects let you make pro-style scene transitions. Fade- or wipe-in works at recording start, and fade- or wipe-out works at recording end or when you enter Record–Standby mode. 1 Set the Power Switch to “PRO.”. 2 Press EFFECT repeatedly until the desired mode’ s name and indication appear .
EN 19 Program AE With Special Effects 1 Set the Power Switch to “PRO.”. 2 Press P .AE repeatedly until the desired mode’ s name and indication appear . They are displayed for approx. 2 seconds, then the name disappears so that only the indication remains.
20 EN Using Menus For Detailed Adjustment This camcorder is equipped with an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings. 1 Set the Power Switch to “PRO.”. 2 Menu access depends on the function you select.
EN 21 Menu Screen A vailable Using The Select Wheel CONTINUED ON NEXT P AGE : Factory-preset Menu Screen A vailable Using The MENU Button This Menu Screen cannot be accessed while recording. MENU SCREEN EXPLANA TIONS Refer to “Focusing” ( Z pg. 26).
22 EN RECORDING Advanced Features (cont.) Menu Screen A vailable Using The MENU Button (cont.) : Factory-preset Allows you to set the tape length depending on the tape used ( Z pg. 12). Refer to “Animation” and “T ime-Lapse” ( Z pg. 25). Refer to “T ime-Lapse” ( Z pg.
EN 23 D E C 25. 99 DEC 25. 99 AM 10 : 25 : 00 AM 10 : 25 : 00 DEC 25. 99 (DATE) (TIME) (DATE&TIME) AUTO DATE No indication (OFF) 1 Set the Power Switch to “PRO.”. 2 Press the Select Wheel to display the Menu Screen. 3 Rotate the Select Wheel to move the highlight bar to “DA TE/TIME DISP .
24 EN Exposure Control This feature automatically adjusts the iris for the best available picture quality , but you can override it and make the adjustment manually . Manual exposure adjustment is recommended in the following situations: • When shooting using reverse lighting or when the background is too bright.
EN 25 1 1 5 S S O 1 3 1 5 F 5 0 F M M S S I I N N IN T . T I M E O 1 1 1 5 F / / F 4 2 S S S S REC T I M E Select Wheel Recording Start/Stop Button REC TIME Menu Display Recording time indicator Interval time indicator INT . TIME Menu MENU Button INT .
26 EN RECORDING Advanced Features (cont.) Focus detection zone Focusing AUTO FOCUS The camcorder ’ s Full Range AF system offers continuous shooting ability from close-up to infinity . However , correct focus may not be obtainable in the situations listed below (in these cases use manual focusing): • When two subjects overlap in the same scene.
EN 27 Power Switch White Balance Adjustment A term that refers to the correctness of color reproduction under various lighting. If the white balance is correct, all other colors will be accurately reproduced. The white balance is usually adjusted automatically .
28 EN 1 Load a tape ( Z pg. 10). 2 Set the Power Switch to “PLA Y”. T o start playback, press 4 / 6 . • T o stop playback, press 5 . • Press 2 to rewind, or 3 to fast-forward the tape during Stop mode. NOTES: ● The camcorder shuts off automatically after about 5 minutes in Stop mode.
EN 29 Set to “PLA Y”. P .AE Button EFFECT Button P .ST ABILIZER Button PLA YBACK Features COUNTER R/M Button Rewind ( 2 ) Button Fast-Forward ( 3 ) Button Play/Pause ( 4 / 6 ) Button Stop ( 5 ) Button T racking: Eliminates noise bars that appear on-screen during playback.
30 EN PLA YBACK Connections These are some basic types of connections. When making connections, refer also to your VCR and TV instruction manuals. A. Connection to a TV or VCR equipped with an S-VIDEO Basic Connections Use optional V ideo and Audio cables.
EN 31 Basic Connections 1 Make sure all units are turned off. 2 Connect the camcorder to a TV or VCR as shown in the illustration ( Z pg. 30). If using a VCR . . . go to step 3 . If not . . . go to step 4 . 3 Connect the VCR output to the TV input, referring to your VCR’ s instruction manual.
32 EN PLA YBACK Using The Cassette Adapter Compact video cassette VCR Reels Compartment door Recording safety hole Sliding latch Cassette Adapter (VHS Playpak) Use this to play back a VHS-C video cassette recorded with this camcorder on a VHS VCR. It is fully compatible with any VHS video cassette recorder .
EN 33 USER MAINTENANCE After Use 1 T urn off the camcorder . 2 Open the LCD monitor fully . Slide EJECT to open the cassette holder , then remove the cassette. 3 Press PUSH to close and lock the cassette holder . 4 Close and lock the LCD monitor . 5 Slide BA TTERY RELEASE to remove the battery pack.
34 EN TROUBLESHOOTING If, after following the steps in the chart below , the problem still exists, please consult your JVC dealer . The camcorder is a microcomputer -controlled device. External noise and interference (from a TV , a radio, etc.) might prevent it from functioning properly .
EN 35 SYMPTOM POSSIBLE CAUSE(S) OTHER During recording, the indications do not appear . The tape will not eject. Some functions are not available. V ertical white lines appear when shooting a very bright object. Bright, crystal-shaped spots appear in the LCD monitor and the viewfinder .
36 EN INDEX Controls, Connectors And Indicators R T 1 y u ) t i w q 2 o 3 4 5 ^ * & r p Q E W e 6 7 9 ! # $ 8 0 @ % (.
EN 37 Controls 1 Diopter Adjustment Control ................. Z pg. 13 2 Lens Cover Open/Close Ring ................ Z pg. 14 3 5-Second Recording Button [5 SEC. REC] ........................................ Z pg. 17 4 • Power Zoom Lever [T/W] .....
38 EN 1 T ape Remaining T ime .......................... Z pg. 15 Blinks when a tape is about to reach its end. 2 Recording Mode Indicator (SP/EP) ........ Z pg. 12 3 , 7 Program AE Indicator ...................... Z pg. 19 Displayed at 3 for approx. 2 seconds when Program AE with special effects is switched from one mode to another by pressing P .
EN 39 W arning Indications Indications Function Displays the battery remaining power . Remaining power level: high. It does not necessarily mean that the battery pack is fully charged. Remaining power level: exhausted As the battery power comes close to nil, the battery indicator blinks (battery power warning).
40 EN General Batter y Precautions • When the C-P6U or C-P7U (cassette adapter) is not functioning even when correctly operated, the battery is exhausted. Replace it with a fresh one. • Use only the following battery: C-P6U or C-P7U ..............
EN 41 3. DO NOT leave the unit . . . ... in places of over 50°C (122°F). ... in places where humidity is extremely low . (below 35%) or extremely high (above 80%). ... in direct sunlight. ... in a closed car in summer . ... near a heater . 4. T o protect the unit, DO NOT .
42 EN TERMS A AC Power Adapter/Charger ......................... pg. 8, 9 Animation Recording .................................... pg. 25 Auto Date Record ......................................... pg. 23 Auto Focus ....................................
EN 43 Connectors JLIP : ø3.5 mm, 4-pole, mini-head jack (compatible with RC-5325 plug) V ideo : 1 Vp-p, 75 Ω unbalanced, analog output (via V ideo output connector) Audio : –8 dBs, 1 k Ω analog output (via Audio output connector) AC Power Adapter/Charger AA-V16U Power requirement U.
44 EN ESP AÑOL A B Alimentación Esta cámara de video posee un sistema de alimentación de 3 vías que le permite seleccionar la fuente de alimentación más apropiada.
EN 45 A B 3 1 2 3 2 1 Utilización de la batería Enganche el lado extremo de la batería en la cámara de video y empuje la batería hasta que se bloquee en el lugar . (Procedimiento para carga, Z p. 8) Para extraer la batería Deslice BA TTERY RELEASE y extraiga la batería.
46 EN HOW TO LOCATE YOUR JVC SERVICE CENTER Dear customer: In order to receive the most satisfaction from your purchase, read the instruction booklet before operating the unit.
EN 47 W ARRANTY (Only in U.S.A.) LIMITED WARRANTY CONSUMER VIDEO 1-90 JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original retail purchase for the period as shown below.
COPYRIGHT© 2000 VICTOR COMPANY OF JAPAN, LTD. U Printed in Japan 1199MKV * UN * YP VICTOR COMP ANY OF JAPAN, LIMITED EN G R-AXM220.
An important point after buying a device JVC GR-AXM220 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC GR-AXM220 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC GR-AXM220 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC GR-AXM220 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC GR-AXM220 will certainly help you make a decision on the purchase.
If you already are a holder of JVC GR-AXM220, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC GR-AXM220.
However, one of the most important roles played by the user manual is to help in solving problems with JVC GR-AXM220. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC GR-AXM220 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
