Instruction/ maintenance manual of the product GR-AX275 JVC
Go to page of 44
G R-A X 2 7 5 COMPACT VHS CAMCORDER LYT0002-025A INSTRUCTIONS ENGLISH EN Com pa ct VHS PA L The Logical Choice PAL The only compact video cassettes that can be used with your VHS VCR*.
Dear Customer , Thank you for purchasing the JVC Compact VHS camcorder . Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new camcorder . Using This Instruction Manual • All major sections and subsections are listed in the T able Of Contents ( Z pg.
n Programme Manager ( Z pg. 12 – 23) n Programme AE with Special Effects ( Z pgs. 12, 13) • Auto Mode Lock • Auto Mode Release • Electronic Fog Filter • ND Ef fect • Sepia • T wilight • Sports • 1/1000 sec. High Speed Shutter • 1/2000 sec.
4 EN GETTING ST ARTED REFRESH indicator REFRESH switch CHG. (charge) indicator Marks END indicator POWER indicator A TTENTION: Before detaching the power sour ce, make sure that the camcorder’ s power is turned off. Failure to do so can result in a camcorder malfunction.
EN 5 NOTES: ● The recording time per char ge is affected by such factors as the time spent in Record/Standby mode and the frequency of zooming. It is safer to have spare battery packs. ● Char ging times noted on page 4 are for fully discharged battey pack, and discharging times are for fully charged battery pack.
6 EN GETTING ST ARTED (cont.) Clock (Lithium) Battery Insertion/Removal This battery is necessary for clock operation and to perform date/time settings. SWITCH OFF POWER 1 Switch off the unit’ s power and remove the power supply unit. OPEN COVER 2 Open the clock battery compartment cover while pressing the release tab.
EN 7 SET CANCEL 1.1.00 10:45 + – GAIN UP S.LX TELE MACRO OFF INTERVAL TIMER OFF REC TIME OFF JLIP ID NO. 07 SET CHARACTER DATE/TIME END :MENU KEY Date/T ime Setting SELECT MODE 1 First set the power switch to “CAMERA”.
8 EN T30 T30 T45 T60 GETTING ST ARTED (cont.) T ape Length Setting Set the tape length according to the length of the tape used. SET T APE LENGTH 1 Press T30•45•60 until the required indication appears in the veiwfinder . T30 = 30 minutes of recording time, T45 = 45 minutes, and T60 = 60 minutes.
EN 9 Grip Adjustment EXP AND LOOP 1 Separate the V elcro strip. INSER T HAND 2 Pass your right hand through the loop and grasp the grip. ADJUST STRAP LENGTH 3 Adjust so your thumb and fingers can easily operate the Recording Start/Stop button and Power Zoom lever .
10 EN 25MIN RECORDING Basic Recording NOTE: Y ou should already have performed the procedures listed below . If not, do so before continuing. ● Power ( Z pg. 4) ● T ape Length setting ( Z pg. 8) ● Grip Adjustment ( Z pg. 9) LOAD A CASSETTE 1 Slide EJECT to open the cassette holder , then insert the cassette with the label facing out.
EN 11 FEA TURE: Zooming PURPOSE: V aries the focal length of the lens and produces the zoom in/out effect. OPERA TION: Zoom In 1) Pull the power zoom switch down toward “T”. Zoom Out 1) Push the switch up toward “W”. NOTES: ● The further the power zoom switch is pushed, the faster the zoom speed becomes.
12 EN 1 / 1 0 0 0 1 / 2 0 0 0 F G N D A U T O M O D E L O C K R E L E A S E FAR NEAR + – SEPIA RECORDING Advanced Features Programme AE With Special Effects All you have to do to access any of the variety of shooting effects is to turn the PROGRAM AE select dial .
EN 13 DIAL VIEWFINDER MODE SYMBOL INDICA TION Sepia The scene being shot is recorded in sepia-tinted (reddish-brown) monochrome, giving the effect of an older movie. Use together with Wide ( Z pg. 16) for the authentic look of a classic Hollywood movie.
14 EN RECORDING Advanced Features (cont.) Focusing Auto Focus The camcorder’s Full Range AF system offers continuous shooting ability from close-up to infinity . However , correct focus may not be obtainable in the situations listed below (in these cases use manual focusing): • When two subjects overlap in the same scene.
EN 15 Manual Focus NOTE: Y ou should already have made the necessary viewfinder adjustments ( Z pg. 6). If you haven’t, do so before continuing. SELECT MODE 1 T urn the PROGRAM AE select dial to any position except AUTO LOCK. ADJUST FOCUS T o farther subject .
16 EN FADE FADE RECORDING Advanced Features (cont.) Fader This feature allows smooth fade-in and fade-out to black blank screen. Fade-in works at recording start, and fade-out works at recording end or when you enter Record–Standby mode. SELECT MODE 1 T urn the PROGRAM AE select dial to any position except AUTO LOCK.
EN 17 TITLE No indication HAPPY BIRTHDAY HAPPY HOLIDAYS OUR FAMILY MOVIE STAR PARTY TIME MERRY CHRISTMAS WEDDING DAY CONGRATULATIONS The characters you have set using Character Generator Instant T itles The camcorder has eight preset titles in memory .
18 EN RECORDING Advanced Features (cont.) Date/T ime Character Inser t This feature allows you to display date, time and characters in your viewfinder and on a connected colour monitor , record them manually or automatically , and even make your own titles.
EN 19 M.W.B. MWB Manual White Balance Adjustment (M.W .B.) This camcorder’s Automatic Colour T emperature system senses the colour temperature of the ambient lighting for automatic white balance adjustment.
20 EN PAUSE GAIN UP S.LX TELE MACRO OFF INTERVAL TIMER OFF REC TIME OFF JLIP ID NO. 07 SET CHARACTER DATE/TIME END :MENU KEY GAIN UP NORM TELE MACRO ON INTERVAL TIMER 1MIN REC TIME 1/2S JLIP ID NO.
EN 21 MENU GAIN UP S.LX T o record a subject in a dark lit environment. When it is more convenient to shoot the subject with a brighter image even if the picture becomes slightly coarse. Automatically selected when the PROGRAM AE select dial is set to AUT O LOCK mode.
22 EN RECORDING Advanced Features (cont.) Self-Timer Y ou can set the delay between pressing RECORDING ST ART/STOP and the actual start of recording. If you secure the camcorder , you (or whomever is operating the camcorder) can enter the scene before recording starts.
EN 23 Animation Give stationary scenes or objects an illusion of movement. This function allows you to shoot a series of pictures, each slightly different, of the same object for a brief period of time. NOTE: Make sure the camcorder is in the Record-Standby mode before performing the following steps.
24 EN + PLA YBACK Using The Cassette Adapter Cassette Adapter Use this to play back a VHS-C video cassette recorded with this camcorder . It is fully compatible with any VHS video cassette recorder . The C-P7U adapter is battery powered and automatically performs tape loading and unloading.
EN 25 There are three basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals. Connection T o A VCR [A] (Editing, Dubbing and Playback) NOTE: Use the provided Audio and Video cables.
26 EN M-0:23:45 PLA YBACK Basic Playback NOTE: Make sure you connect your camcorder as directed in “Basic Connections” ( Z pg. 25). LOAD A CASSETTE 1 Slide EJECT to open the cassette holder , then insert the cassette with the label facing out. Press PUSH to ensure the holder is closed and locked.
EN 27 + – FEA TURE: Manual T racking PURPOSE: T o eliminate noise bars that appear on the screen during playback. OPERA TION: 1) Press either +/– button as many times as necessary for best picture. NOTES: ● T o reset TRACKING to the original preset, press both + and – buttons simultaneously .
28 EN EDITING T ape Dubbing CONNECT EQUIPMENT 1 Following the illustration at left, connect the camcorder and the VCR. PREP ARE FOR DUBBING 2 Set the camcorder ’ s Power switch to “PLA Y”, turn on the VCR’ s power , and insert the appropriate cassettes in the camcorder and the VCR.
EN 29 SET REMOTE/VCR CODE SET REMOTE TO OPERA TE VCR 1 T urn off the power to the VCR and point the remote toward the VCR’ s infrared sensor . Then, referring to the VCR CODE LIST on the left, press and hold MBR SET , and press button (A) and then (B).
30 EN A B C EDITING (cont.) PREP ARE CAMCORDER 2 Insert a recorded tape and set the Power switch to “PLA Y”. PREP ARE VCR 3 T urn the power on, insert a recordable tape and engage the AUX mode (refer to VCR’s instructions). SELECT SCENES ACCESS R.
EN 31 1 3 2 IN OUT IN OUT IN OUT ORIGINAL T APE (camcorder) EDITED TAPE (VCR) AUTOMA TIC EDITING TO VCR ENGAGE VCR’S RECORD–P AUSE MODE 1 Point the remote control toward the VCR’ s infrared sensor and press VCR REC STBY , or manually engage the VCR’ s Record-Pause mode.
32 EN USING REMOTE CONTROL UNIT The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (PLAY , ST OP , P AUSE, FF , and REW) of your VCR. This remote control unit makes additional recording functions possible.
EN 33 FEA TURE: Self-Timer , Animation and T ime-Lapse PURPOSE: The remote control lets you set/release Interval T imer and Rec Time functions as well as the Menu screen. OPERA TION: Self-Timer 1) Set Instead of performing steps 1 through 3 on pg. 22 (“Self-Timer”), press INT .
34 EN M-0:23:45 USING REMOTE CONTROL UNIT (cont.) Insert Editing Y ou can record a new scene into a previously recorded tape, replacing a section of the original recording with minimal picture distortion at the in- and out-points. The original audio remains unchanged.
EN 35 M-0:05:20 e Audio Dubbing Y ou can record a new soundtrack on a prerecorded tape (normal audio only). ** Perform steps 1 , 2 and 3 of the Insert Editing procedure ( Z pg.
36 EN TROUBLESHOOTING SYMPTOM POSSIBLE CAUSE(S) POWER No power is supplied. The power suddenly goes off and doesn’t come back on by itself. ● The battery pack has not been attached correctly ( Z pg. 4). ● The battery pack is not charged ( Z pg. 4).
EN 37 SYMPTOM POSSIBLE CAUSE(S) OTHER The tape won’t eject. Some functions are not available. V ertical white lines appear when shooting a very bright object. Bright, crystal-shaped spots appear in the viewfinder . An error number (i.e. E03) appears in the viewfinder .
38 EN INDEX Controls # FF Button ........................................... Z pg. 26 RET AKE F Button ................................ Z pg. 1 1 $ PLA Y/PAUSE Button ........................... Z pg. 26 % SELECT Button ...............................
EN 39 er t y i W QE R T w o p u U Y Connectors w J terminal (JLIP (Joint Level Interface Protocol) Connector .) (Located beneath the jack cover) • Connect the Editing Cable when performing Random Assemble Editing ( Z pg. 30). • It is used to connect the camcorder to a device such as a personal computer.
40 EN INDEX Viewfinder 10 : 24 25 . 12 . 97 ME RR Y CH R I ST M A S TAPE END – 05 MWB DISP. REC SEPIA LENS COVER FADE 18MIN T30 1MIN 1/2S INDEX PA U S E 7 8 9 1 5 6 $ ^ % & * ( ) 0 @ # ! 3 2 4 w q 1 Cassette W arning/Remaining T ape Time .......
EN 41 CAUTIONS General Batter y Precautions • When the C-P6U or C-P7U (cassette adapter) is not functioning even when correctly operated, the batteries are exhausted. Replace them with fresh ones. • Use only the following batteries: C-P6U or C-P7U .
42 EN CAUTIONS (cont.) Main Unit 1. For safety , DO NOT . . . .... open the camcorder’s chassis. .... disassemble or modify the unit. .... short-circuit the terminals of the battery pack. Keep it away from metallic objects when not in use. .... allow inflammables, water or metallic objects to enter the unit.
EN 43 SPECIFICA TIONS GENERAL Format : VHS P AL standard Power sour ce : DC 6 V } Power consumption : 5.3 W Signal system : P AL-type V ideo recording system Luminance : FM recording Colour : Converted sub-carrier direct recording Conforms to VHS standard Cassette : cassette T ape speed : 23.
GR-AX275 COPYRIGHT© 1997 VICTOR COMPANY OF JAPAN, LTD. EG Printed in Japan 0397TOV * UN * SN VICTOR COMP ANY OF JAPAN, LIMITED EN.
An important point after buying a device JVC GR-AX275 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC GR-AX275 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC GR-AX275 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC GR-AX275 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC GR-AX275 will certainly help you make a decision on the purchase.
If you already are a holder of JVC GR-AX275, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC GR-AX275.
However, one of the most important roles played by the user manual is to help in solving problems with JVC GR-AX275. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC GR-AX275 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
