Instruction/ maintenance manual of the product GM-F420S JVC
Go to page of 32
INSTR UCTIONS GM-F520S GM-F470S GM-F420S LCD DISPLA Y MONIT OR LCT2505-002A-H T ab le of Contents Safety Precautions .............................................. 2 IMPOR T ANT SAFEGU ARDS ........................... 2 Maintenance ...................
2 Safety Precautions PO WER CONNECTION The power supply v oltage rating of this product is A C 120 V (For U .S.A. and Canada) and AC 220 – 240 V (For European countries, Asian countries, and United Kingdom). The power cord attached conf orms to the following po wer supply voltage and countries.
3 European Union onl y Dear Customer , This apparatus is in conf or mance with the valid European directiv es and standards regarding electromagnetic compatibility and electrical safety .
4 T o prevent an accidental fall Fix the monitor to a wall b y using strings. Fixing the monitor Attach the hook (not provided) to the rear panel using M6 x 10 mm screws (not pro vided). Bind the hooks on the rear panel of the monitor to a wall or a pillar using durable string.
3 4 5e r t 6 7 8 9 p q w 1 2 5 Inserting the batteries Use two AA/R6 dry cell batter ies. Inser t the batteries from the · end, making sure the ª and · polarities are correct. • F ollow the warnings printed on the batteries. • Battery life is about six months to one y ear , depending on how much you use the remote control.
6 SENSOR EXT . SPEAKER OUT AC OUT AC IN LAN RS-232C RS-485 DVI-D (HDCP) RGB IN RGB OUT VIDEO IN AUDIO 1 IN AUDIO 2 IN AUDIO 2 OUT VIDEO OUT AUDIO 1 OUT MAKE/TRIG. (IN ONL Y) Attaching the power cor d holder The provided pow er cord holder prev ents accidental disconnection of the AC po wer cord from the A C IN ter minal.
7 Video input terminals Input terminals on the monitor Connecting cables Output terminals on external equipment Notes AD V I D VI-D (HDCP) IN D VI cab le D VI output Compatible with HDCP . When the picture is not displa yed correctly , change the setting of “D VI MODE” (see page 13).
8 A v ailable signals The follo wing signals can be input to this monitor . Video signals √ : Acceptable / —: Not acceptab le Signal name Frequency Input terminal Notes Horizontal (kHz) Vertical (Hz) VIDEO RGB D VI-D NTSC 3.58 15.734 59.94 √ —— P AL-M 15.
9 Computer signals • When analog RGB signals are input, part of the picture may not be displa yed or an unnecessary picture may appear in the f ollowing cases. If this happens, apply “A UT O ADJUST” or adjust “SIZE” and “POSITION” in the “SIZE SETTING” menu (see page 13).
Remote sensor 10 T urning on the main power | : Main power on ‡ : Main power off On the bottom of the rear panel Daily Operations • When the Control Loc k is set to “ON” (see page 16), y ou cannot use the buttons on the main unit.
11 Displa ying the current status The information of the current input is displa yed. NO TE • When no signal is input, “NO SYNC” appears . When a signal this monitor does not suppor t is input, “Out of r ange” appears .
12 1 Display the menu. T o display the main menu, press MENU/EXIT . T o display the set-up menu, press SET -UP . 2 Select an item by pressing 5 ∞ , then press 3 . The sub menu appears. Ex.: When “PICTURE SETTING” in the main menu is selected 3 Select an item in the sub menu by pressing 5 ∞ , then press 2 3 to adjust it.
13 Menu Configuration —MAIN MENU PICTURE SETTING Item T o do Setting value PICTURE MODE Select a picture mode (see “Selecting the picture mode” on page 11). D YNAMIC, NORMAL, USER CONTRAST Adjust contrast of the picture. –20 += 00 += +20 BRIGHT Adjust the brightness of the picture.
14 Menu Configuration —MAIN MENU (cont.) FUNCTION SETTING Item T o do Setting value COLOR SYSTEM Select the color system. When y ou cannot view pictures correctly with “A UTO , ” select an appropriate option according to the current input.
15 Menu Configuration —SET -UP MENU INFORMA TION Item T o do Setting value ST A TUS DISPLA Y Set if you w ant the information of the current input to be display ed on the screen (see “Displa ying the current status” on page 11). A UT O, OFF SUB HOUR METER Display the hours of current use (unit: hour).
16 Menu Configuration —SET -UP MENU (cont.) SCHEDULER Item T o do Setting value PRESENT TIME Adjust the cloc k. • F or the setting procedure, see page 17. PROGRAM SET Set the P ower-on/off Timer f or each day . • F or the setting procedure, see page 17.
17 T o activate the Security Lock 1 Select “SECURITY LOCK (: OFF)” on the SECURITY LOCK sub menu of the set-up menu. 2 Press 3 . The passw ord entering screen appears. • When shipped from the f actor y , the pass word is set to “0000. ” T o change the pass word, see the right.
18 Using the Motion Sensor Outline of the motion sensor By connecting the supplied motion sensor , you can set the monitor to perf orm the specified operation when the sensor detects the motion of human around the monitor .
19 Setting Make the settings f or the motion sensor on “MO TION SENSOR” of the main menu. • F or the menu operation procedure , see page 12. Item T o do Setting value A UT O PO WER T o turn on the monitor when the motion sensor detects the motion of human, select “ON.
20 LAN <IR OUT system> Control signals from the remote control of external equipment are sent out to the equipment through the RS- 485 OUT terminal. Consult your dealer f or details. • Y ou cannot use the IR OUT system and the serial communication via the RS-485 ter minal at the same time.
21 <Basic command list> No. Commands Functions Data 1* ! ** B C N 1 Cr Star ts communication (connection) No data 2* ! ** BCN0 C r T erminates communication (termination) No data 3! ** B I D S E.
22 This is a female terminal. How to Use External Control (cont.) Using the MAKE/TRIG. system The RS-485 IN terminal is configured as follows . Y ou can assign the functions to each pin terminal by setting “REMO TE SYSTEM” (see “POR T F1 – PORT F5” on page 15).
23 Using the LAN system Recommended operating environment Operating system: Microsoft ® Windows ® XP/Windows ® Vista Browser: Microsoft ® Internet Explorer ® 6.0 and 7.0 Cable Ether net cable (Category 5 or higher) T o join the network For the oper ation procedure, see page 12.
24 Me n u 2 Motion Sensor Setting Me n u 3 Gene r al-Pu r pose Contro l Me n u 1 Main Control Me n u 4 LAN Setting Log Out Feedback InformatIon General-Purpose Control MAIN MENU NO P ARAMETE R FUNCTION SELECTION COMMAND to Send COMMAND ST A TUS POWER: ON INPUT: VIDEO SIGNAL FORMA T: NTSC ASPECT: REGULAR COLOR TEMP : MID SENDING.
25 <LAN Setting> Setting the log-in name for the control screen and E-mail of the monitor . Y ou can also confirm the networ k setting. 1 Displays the current network setting. 2 Sets the log-in name to log in the web control screen. • Up to 8 characters can be used.
26 T roubleshooting (cont.) Symptom Probable cause and corrective action Pa ge P ower is suddenly turned on or off. • The P o wer-on/off Timer is activated. Deactiv ate it. 17 • “A UT O PO WER” of “MO TION SENSOR” is set to “ON. ” Deactivate it.
27 Self-diagnostic indication When something abnormal occurs with the monitor, this function inf orms you of the condition of the monitor with the self-diagnostic lamps, allowing f or smooth service work.
28 Specifications General Model name GM-F520S GM-F470S GM-F420S T ype LCD Monitor Screen size T ype 52 wide f or mat T ype 47 wide f ormat T ype 42 wide format Aspect ratio 16:9 (Wide f ormat) LCD panel 52 inch wide, active matrix TFT 47 inch wide, activ e matrix TFT 42 inch wide, active matrix TFT Effective screen size (W x H, Diagonally) 1 152.
29 Dimensions GM-F520S T op view Front vie w Side view Rear view Input/output terminals VIDEO IN Video input BNC terminal x 1 1 V (p–p), 75 Ω VIDEO OUT Video output BNC terminal x 1 1 V (p–p), 75 Ω RGB IN RGB input D-sub 3-row 15-pin x 1 (RGB is compatib le with DDC2B.
30 GM-F420S T op view Front vie w Side view Rear view Dimensions GM-F470S T op view Front vie w Side view Rear view Screw hole f or optional installation unit. Screw siz e: 8 – M6, depth: 15 mm (VESA standard) 963.6 (38) 556.6 (22) 400 (15 3/4) 400 (15 3/4) 200 (7 7/8) Specifications (cont.
GM-F520S_EN.indd 31 GM-F520S_EN.indd 31 09.2.16 5:05:21 PM 09.2.16 5:05:21 PM.
GM-F520S/GM-F470S/GM-F420S LCD DISPLA Y MONIT OR © 2009 Victor Company of J apan, Limited 0209TKH-MW -MT GM-F520S_EN.indd 32 GM-F520S_EN.indd 32 09.2.
An important point after buying a device JVC GM-F420S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC GM-F420S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC GM-F420S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC GM-F420S you will learn all the available features of the product, as well as information on its operation. The information that you get JVC GM-F420S will certainly help you make a decision on the purchase.
If you already are a holder of JVC GM-F420S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC GM-F420S.
However, one of the most important roles played by the user manual is to help in solving problems with JVC GM-F420S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC GM-F420S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
