Instruction/ maintenance manual of the product DX-T5 JVC
Go to page of 100
COMPACT COMPONENT SYSTEM DX-T5 —Consists of CA-DXT5, SP-XT5 and SP-XST5 CA-DXT5 SP-XT5 SP-XST5 INSTRUCTIONS GVT0146-001A [US, UN] English DXT5_Cover[USUN].
G-1 Warnings, Cautions and Others Caution–– button! Disconnect the mains plug to shut the power off completely. The button in any position does not disconnect the mains line. The power can be remote controlled. CAUTION To reduce the risk of electrical shocks, fire, etc.
G-2 Caution: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1. Front: No obstructions and open spacing. 2. Sides/Top/Back: No obstructions should be placed in the areas shown by the dimensions below.
G-3 IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION : Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION : Visible and invisible laser radiation when open and interlock failed or defeated.
1 English Precautions Installation • Install the System in a location with adequate ventilation to prevent internal heat buildup in the System. • Install in a place which is level, dry and neither too hot nor too cold—between 5°C and 35°C. • Leave sufficient distance between the System and the TV.
2 English Playable Disc Types In addition to the above discs, this system can play back audio data recorded on CD Text, CD-G (CD Graphics), and CD-Extra. • The following discs cannot be played back: DVD+R, DVD+RW, CD-I (CD-I Ready), Photo CD, etc. Playing back these discs will generate noise and damage the speakers.
3 English Connections • Connect VIDEO OUT directly to the video input of your TV. Connecting VIDEO OUT to a TV via a VCR may interfere with your viewing when playing back a copy- protected disc. Your viewing may be interfered when connecting VIDEO OUT to an integrated TV/VCR system.
4 English ~ TV/monitor • To select progressive scanning mode (see page 14), use COMPONENT jacks. • Connect the VIDEO jack, S-VIDEO jack, or COMPONENT jacks whichever you want to use. Ÿ Digital audio component • Set “DIGITAL AUDIO OUTPUT” in the “AUDIO” menu correctly according to the connected digital audio equipment (see page 37).
5 English @ Front main speakers and matrix surround speakers • When connecting the speaker cords, match their polarity with that of the speaker terminals: red/white to (+) and black to (–). • Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the System.
6 English Display Indication The indications on the display teach you a lot of things while you are operating the System, Before operating the System, be familiar with when and how the indicator illuminates on the display. 1 PROGRESSIVE indicator • Lights when the progressive scanning mode is selected.
7 English Daily Operations —Playback ¥ Turn on the power. The STANDBY lamp on the main unit goes off. • Without pressing AUDIO, the System also turns on by pressing one of the source select buttons in the next step. ø Select the source. Playback automatically starts if the selected source is ready to start playback.
8 English Listening to the Radio To select the AM tuner interval spacing Some countries space AM stations 9 kHz apart, and other countries use 10 kHz spacing. 1 Select “AM,” then turn off (stand by) the System. 2 Select the AM tuner interval spacing.
9 English 2 Select a preset number. Playing Back a Disc Before operating a disc, be familiar how a disc is recorded. • DVD Video comprises of “ Titles ” which includes “ Chapters, ” DVD Audi.
10 English To locate a particular portion While playing a disc except MP3/WMA... • No sound comes out while searching on DVD Video/ SVCD/VCD. To return to normal playback, press DVD/CD 3 . T o select an item directly You can select a title/chapter/track directly and start playback.
11 English Playing Back a Tape To insert a tape You can play back type I tapes. • The use of C-120 or longer tape is not recommended. To change the tape running direction To reverse the tape automatically To playback the both decks A and B continuously —Relay Play When the cassettes are set in the both decks.
12 English Daily Operations —Sound&Other Adjustments Adjusting the Volume The volume level can be adjusted in 32 steps (VOLUME MIN, VOLUME 1 – VOLUME 30, and VOLUME MAX). Reinforcing the Bass Sound To adjust the bass level gradually—ACTIVE BASS EX.
13 English Selecting the Sound Modes You can select one of the preset Sound Modes. * Surround elements are added to the SEA elements to create being-there feeling in your room.
14 English Creating 3-dimensional Sound Field—3D Phonic While playing a disc... Presetting Automatic DVD Video Sound Increase Level The DVD Video sound is sometimes recorded at a lower level than for other discs and sources.
15 English 2 Select a preset picture tone. To adjust the picture tone 1 Select “USER1” or “USER2.” • Follow steps 1 and 2 explained on the previous page. 2 Select a parameter you want to adjust. 3 Adjust the parameter. 4 Repeat steps 2 to 3 to adjust other parameters.
16 English Unique DVD/VCD Operations Selecting the Sound Track For DVD Video: While playing back a chapter containing audio languages, you can select the language to listen to. For DVD Audio: While playing back a track containing audio channels, you can select the audio channel to listen to.
17 English Selecting the Subtitle Language For DVD Video: While playing back a chapter containing subtitles in different languages, you can select the subtitle language to display on the TV screen. For DVD-VR: While playing, you can turn on or off the subtitle.
18 English Playing Back Bonus Group For DVD Audio only: Some DVD Audios have a special group called “bonus group” whose contents are not open to the public. • To play back a bonus group, you have to enter the specific “key number” (a kind of password) for the bonus group.
19 English Advanced Disc Operations Programming the Playing Order —Program Play You can arrange the playing order of the tracks (up to 99) before you start playback. 1 Before starting playback, activate Program Play. 2 Select chapters or tracks you want for Program Play.
20 English * Resume does not work for Program Play. To check the programmed contents Before or after playback... To modify the program Before or after playback... To exit from Program Play Before or after playback... Playing at Random—Random Play You can play the contents of all the loaded discs at random.
21 English Playing Repeatedly—Repeat Play You can repeat playback. • You can also select the repeat mode using the on-screen bar (see page 23). • The indicator(s) lights on the display as follows to indicate the current repeat mode. • For DVD Video: While playing.
22 English On-Screen Disc Operations On-screen Bar Information You can check the information on disc (except for MP3/ WMA/JPEG disc) and use some functions through the on- screen bar.
23 English O perations Using the On-screen Bar Basic operation procedure through the on-screen bar is as follows: Ex.: Selecting a subtitle (French) for DVD Video: While a disc is selected as the source... 1 Display the on-screen bar with the pull-down menu.
24 English To change the time information You can change the time information in the on-screen bar and the display window on the main unit. 1 Display the on-screen bar with the pull-down menu. 2 Make sure is selected (highlighted). 3 Change the time indication.
25 English A-B Repeat 1 While playing, display the on-screen bar with the pull- down menu. 2 Select . 3 Display the pop-up window. 4 Select “A-B”. 5 Select the start point (A). • After selecting the starting point (A), you can search for the end point using ¡ .
26 English Chapter/Track Search You can search for the number of the item to play. For DVD Video/DVD-VR: Chapter For DVD Audio: Track 1 While playing, display the on-screen bar with the pull- down menu. 2 Select or . 3 Display the pop-up window. 4 Enter the desired chapter/track number.
27 English Control screen for MP3/WMA/JPEG disc The control screen automatically appears on the TV screen when you load an MP3, WMA, or JPEG disc. To move the highlight (green) bar between group list .
28 English To stop playback To repeat title/play list for DVD-VR While playing or before starting playback... * Not available before starting playback. To repeat slide-show for JPEG While playing or before starting playback... • For Repeat Play of MP3/WMA, see pages 21 and 24.
29 English Recording Operations Recording on a Tape You can use type I tapes for recording. • To play a tape, see page 11. 1 Insert a recordable cassette in deck B.
30 English 3 Start playing the source—“FM,” “AM,” “DVD/CD,” “TAPE-A” or “AUX.” • When recording a disc, you can also use “Synchronized Disc Recording” (see the right column). • When recording from deck A, you can also use “Dubbing” (see below).
31 English Enjoying Karaoke The functions described in this section are not available for DVD Audio/DVD-VR. Singing Along (Karaoke) You can enjoy singing along (Karaoke) by using two microphones. • By pressing REC START/STOP, you can record your singing-along.
32 English To apply an echo to your voice While the Mic Mixing Mode is activated... • As the number increases, echo level also increases. To adjust the Key (disc playback only) While playing back... To cancel the Key Control • Key Control is also canceled when you deactivate the Mic Mixing Mode, or select another track or disc.
33 English To turn on/off the fanfare 1 Enter the fanfare setting mode. 2 Select the fanfare setting. Reserving Karaoke Songs —Karaoke Program Play You can determine the playback order of the titles or tracks on the disc player. You can program up to 12 steps.
34 English Timer Operations Setting the Timer Using Daily Timer, you can wake up with your favorite song. On the other hand, with Recording Timer, you can make a tape of a radio broadcast automatically. • You cannot activate Daily Timer and Recording Timer at a time.
35 English 3 Turn off the System (on standby) if you have set the timer with the System turned on. To turn off the Timer after the setting is done You can turn off the timer after it has been set. • Since Daily Timer is activated at the same time everyday, you may need to cancel it on some particular days.
36 English Setup Menu Operations Initial settings Some items in the menus cannot be changed during playback. 1 Press SET UP. 2 Press 2 ( or 3 ) to select the menu. 3 Press 5 ( or ∞ ) to move to select the item. 4 Press ENTER. 5 Press 5 ( or ∞ ) to select the options, then press ENTER.
37 English AUDIO menu Item Contents DIGITAL AUDIO OUTPUT Set this item correctly when using the OPTICAL DIGITAL OUTPUT terminal on the rear. PCM ONLY: When connecting to audio equipment which can decode only linear PCM signals. DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an amplifier with a built- in Dolby Digital decoder.
38 English Operating the TV Operating TV You can operate the JVC’s or other manufacturers’ TV using this remote control. 1 Slide the AUDIO/TV selector to “TV.” 2 Press and hold until the following steps are complete. 3 4 Enter the 2-digit manufacture’s code number.
39 English Additional Information Learning More about This System Introduction (see pages 1 to 2) Playable Disc Types: • About audio format – Linear PCM: Uncompressed digital audio, the same format used for CDs and most studio masters.
40 English Special Picture Playback: • During slow-motion playback, no sound will be reproduced. • You cannot use frame-by-frame playback for DVD-VR. • While zoomed in, the picture may look coarse. Advanced Disc Operations (see pages 19 to 21) Programming the Playing Order—Program Play: • While programming steps.
41 English Enjoying Karaoke (see pages 31 to 33) Reducing the Lead Vocal—Vocal Masking: • The Vocal Masking Mode setting is not applied to the optical digital output signals through the OPTICAL DIGITAL OUTPUT terminal. • When playing a Karaoke disc in the Vocal Masking Mode, the vocal may not be reduced or the volume may be lower.
42 English Handling cassette tapes • If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotate it. – If the tape is loose, it may get stretched, cut, or caught in the cassette. • Be careful not to touch the tape surface.
43 English MP3 groups and tracks are not played back as you expect. ] The playing order is determined when the disc was recorded. It depends on the writing application. MP3/WMA or JPEG files are not played back. ] The inserted disc may include both type of tracks (MP3/ WMA files and JPEG files).
44 English Specifications Amplifier section Output Power: MAIN SPEAKERS: 150 W per channel, min. RMS, driven into 4 Ω at 1 kHz with no more than 10% total harmonic distortion.
45 English OPTICAL DIGITAL OUTPUT Signals *1 While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the OPTICAL DIGITAL OUTPUT terminal if the discs are not copy-protected. *2 There is no output for DVD Audio with content protection set.
46 English Parts Index Remote control Main unit Button Page Button Page AUDIO z 7 KARAOKE SCORING 1 32 TV x 38 7 7 7 7 8 9 – 11, 20 KEY # : 32 ¡ ¡ ¡ ¡ / 1 1 1 1 9 Q 8, 10, 11, 18 KEY A 32 ¢ ¢ ¢ ¢ / 4 4 4 4 7 .
1 中 文 使用前注意事项 安装 • 将本机安放在通风良好之处，以防内热积聚在机内。 • 将本机安放在平坦，干爽且温度不过于炎热或寒冷的地方— 介.
2 中 文 可以播放的碟片类型 除上述碟片之外，本机还可以播放录制在文字 CD ， CD-G （图表 CD ）和特版 CD 里的音频数据。 • 不能播放下列碟片： DVD+R .
3 中 文 连接 • 将 VIDEO OUT 直接连接至电视机的视频输入。在播放拷 贝保护的碟片时，通过 VCR 将 VIDEO OUT 连接至电视机 可能会影响观赏效果。将 VIDEO OU.
4 中 文 ~ 电视机／显示器 • 想要选择逐行扫描模式 （参阅第 14 页） ，使用 COMPONENT 插孔。 • 连接 VIDEO 插孔， S-VIDEO 插孔或 COMPONENT 插 孔中任何一个.
5 中 文 @ 主前置扬声器和距阵环绕声扬声器 • 在连接扬声器导线时，请对准扬声器端子的电极：红色／白 色与 （ + ）相连接，黑色与 （ – ）相连接.
6 中 文 信息显示 在操作本机的过程中，显示屏上会出现许多指导性信息显示。 在操作本机之前，请首先弄清显示屏上的指示灯是在何时并 如何点亮。 .
7 中 文 日常操作 —播放 ¥ 启动电源。 主机上的 STANDBY 灯熄灭。 • 不用按 AUDIO 键，只要在下一步操作中按某个播 放源选择键，本机便会自动启动。 ø.
8 中 文 收听广播 如何选择 AM 调谐器的间隔距离 某些国家将 AM 电台设定成 9 kHz 间隔，而另一些国家则使 用 10 kHz 间隔。 1 选择 “ AM ” ，然后关闭本.
9 中 文 中 文 2 选择一个预设号码。 播放碟片 在操作碟片之前，首先了解碟片是如何录制的。 • DVD 视频由 “标题” 构成，标题内含有 “章节” ， DV.
10 中 文 如何搜索特定部位 在播放 MP3/WMA 以外的碟片时 ... • 在 DVD 视频 /SVCD/VCD 上进行搜索的过程中不发出声 音。 想要返回到标准播放时， 按 DVD/CD 3 .
11 中 文 播放磁带 如何插入磁带 您可以播放 I 型磁带。 • 建议不要使用 C-120 或更长的磁带。 如何切换走带方向 如何自动转向播放磁带 如何连续播放 A 舱和 B 舱—接力播放 当两个舱内都装有磁带时 .
12 中 文 日常操作 —调整声音和其他项目 调整音量 音量水平可以在 32 个阶段（ VOLUME MIN ， VOLUME 1 – VOLUME 30 以及 VOLUME MAX ）之间进行调整。 增强低音 如何渐次调整低音水平— ACTIVE BASS EX.
13 中 文 中 文 选择声音模式 您可以选择一种预设的声音模式。 * SEA 效果加上环绕声效果便可以在您的房间内建立身临现 场的感觉。 想要取消声音模式.
14 中 文 创建 3 维声场— 3 维立体声 在播放碟片的过程中 ... 预设 DVD 自动声音增高水平 有时录制 DVD 视频时所用的声音水平会比其他碟片和播放源 低。.
15 中 文 2 选择预设的图像色调。 如何调整图像色调 1 选择 “用户 1 ”或 “用户 2 ”。 • 操作上一页说明的步骤 1 和 2 。 2 选择想要调整的参数。 3 .
16 中 文 DVD/VCD 的特殊操作 选择音频曲目 对应 DVD 视频： 在播放含有声音语言的章节时，可以选择想 要听的语言。 对应 DVD 音频： 在播放含有音频声道.
17 中 文 选择字幕语言 对应 DVD 视频： 在播放含有多种语言字幕的章节时，您可以 选择想让其在电视屏幕上显示的字幕语言 。 对应 DVD-VR ： 在播放过.
18 中 文 播放赠送组 仅对应 DVD 音频： 某些 DVD 音频上含有一个被称为 “赠送 组”的特殊组，组的内容不对众公开。 • 想要播放赠送组时，必须为其.
19 中 文 高级碟片操作 编排播放顺序—程序播放 在开始播放之前，您可以编排曲目的播放顺序 （最多达 99 曲） 。 1 在开始播放之前启动程序播放模式.
20 中 文 * 记忆播放对程序播放不起作用。 如何确认编排的内容 在播放前或播放后 ... 如何修改程序 在播放前或播放后 .
21 中 文 重复地播放— 重复播放 您可以重复地进行播放。 • 您也可以使用屏幕条窗来选择重复模式 （参阅第 23 页） 。 • 显示屏上的指示灯按如下所示点亮以说明当前的重复模式。 • 对应 DVD 视频： 在播放中 .
22 中 文 在屏幕上操作碟片 关于屏幕条窗 您可以通过屏幕条窗来确认碟片信息 （ MP3/WMA/JPEG 碟 片除外）以及使用某些功能。 屏幕条窗 123 456 789 10 0 +10 D.
23 中 文 使用屏幕条窗进行操作 屏幕条窗上的基本操作程序如下： 例：为 DVD 视频选择字幕语言 （法语）时： 当选择碟片作为播放源时 .
24 中 文 切换时间信息 您可以切换屏幕条窗和主机显示窗中的时间信息。 1 显示带有下拉菜单的屏幕条窗。 2 确保选择 （点亮）的是 。 3 切换时间信息.
25 中 文 A-B 重复 1 在播放的过程中，显示带有下拉菜单的屏幕条窗。 2 选择 。 3 显示弹跳窗。 4 选择 “ A-B ”。 5 选择开始点 （ A ）。 • 选择开始点 .
26 中 文 章节／曲目搜索 您可以搜索想要播放的项目号码。 对应 DVD 视频 /DVD-VR ：章节 对应 DVD 音频：曲目 1 在播放的过程中，显示带有下拉菜单的屏.
27 中 文 MP3/WMA/JPEG 碟片的控制屏 置入 MP3 ， WMA 或 JPEG 碟片时，控制屏自动出现在电视 机屏幕上。 如何在组清单和曲目清单之间移动亮 （绿色）条 （.
28 中 文 如何停止播放 想要重复播放 DVD-VR 的标题／播放清单时 在播放的过程中或播放开始前 ... * 播放开始前不适用。 如何为 JPEG 重复进行幻灯式播放 在播放的过程中或播放开始前 .
29 中 文 录音的操作 用磁带录音 可以使用 I 型磁带进行录音。 • 关于如何播放磁带，参阅第 11 页。 1 在 B 舱内插入一盒可以录音的盒式磁带。 2 在显.
30 中 文 3 开始播放播放源— “ FM ”，“ AM ”，“ DVD/CD ”， “ TAPE-A ”或 “ AUX ”。 • 在复录碟片时，还可以使用 “同步复录碟片”功能 （参 阅右.
31 中 文 欣赏卡拉 OK 本章节描述的功能对应 DVD 音频 /DVD-VR 不起作用。 跟随唱 ( 卡拉 OK ） 使用两只麦克风您便可以欣赏跟随唱 （卡拉 OK ）。 • 按 REC .
32 中 文 如何在您的声音里增添回音效果 麦克风混频模式启动时 ... • 随着数字增大，表示回音水平也在增高。 如何调整音调 （仅限于碟片播放） 在播放的过程中 .
33 中 文 如何打开／关闭奏乐声 1 进入奏乐声设定模式。 2 选择奏乐声设定。 预定卡拉 OK 歌曲 —卡拉 OK 程序播放 您可以决定视盘机上标题或曲目的播.
34 中 文 定时器的操作 设定定时器 通过使用日常定时器，您可以被自己喜欢的歌声唤醒。而通 过使用录音定时器，您可以让收音机节目自动录到磁带上.
35 中 文 3 如果是在本机启动状态下设定的定时器，须关闭本机 （使 本机进入待机状态） 。 在完成设定后如何关闭定时器 在设定后您可以将定时器关.
36 中 文 设置菜单操作 初始设定 在播放过程中，菜单中某些项目不能改变。 1 按 SET UP 键。 2 按 2 （ 或 3 ）键选择菜单。 3 按 5 （ 或 ∞ ）键移动选择.
37 中 文 音频菜单 项目 内容 数码音频输出 使用本机后部的 OPTICAL DIGITAL OUTPUT （光纤数码输出） 端子时正确设置此项。 PCM ： 当连接只能解码线性 PCM .
38 中 文 操作电视机 操作电视机 您可以使用本机的遥控器操作 JVC 牌或其他厂家的电视机。 1 将 AUDIO/TV 选择器滑动至 “ TV ”。 2 按住此键不要松开，.
39 中 文 附加信息 进一步掌握本机的性能 简介 （参阅第 1 至 2 页） 可以播放的碟片类型： • 关于音频格式 – 线性 PCM ： 是非压缩式数码音频格式，.
40 中 文 特殊的图像播放方法： • 在进行慢动作播放的过程中听不到声音。 • 对应 DVD-VR 不能使用逐帧播放。 • 在放大播放的过程中，图像可能看起来粗糙。 高级碟片操作 （参阅第 19 至 21 页） 编排播放顺序—程序播放： • 在编排程序项目的过程中 .
41 中 文 欣赏卡拉 OK （参阅第 31 至 33 页） 消除原唱—原唱掩蔽： • 原声掩蔽模式可用于通过 OPTICAL DIGITAL OUTPUT （光纤数码输出）端子输出的光纤数码.
42 中 文 保养磁带 • 如果磁带盒中的带条松弛，可将铅笔插入到其中一个卷带筒 内，通过卷绕的方法将松弛的带条卷紧。 – 如果带条松弛，可能会拉.
43 中 文 MP3 组和曲目无法按意愿播放。 ] 播放顺序是在录制碟片时决定的。取决于写入时用的应用 程序。 无法播放 MP3/WMA 或 JPEG 文件。 ] 插入的碟片里.
44 中 文 规格 功率放大器部分 输出功率： 主扬声器： 每频道 150 W ， 最小 RMS ， 1 kHz 时驱动于 4 Ω ，总谐波失真不超过 10% 。 数码输出： OPTICAL DIGITAL .
45 中 文 OPTICAL DIGITAL OUTPUT （光纤数码输出）信号 *1 在播放某些 DVD 时，如果碟片为非防拷贝碟片，自 OPTICAL DIGITAL OUTPUT （光纤数码输出）端子输出的数.
46 中 文 部件索引 遥控器 主机 按键 页码 按键 页码 AUDIO z 7 KARAOKE SCORING 1 32 TV x 38 7 7 7 7 8 9 – 11, 20 KEY # : 32 ¡ ¡ ¡ ¡ / 1 1 1 1 9 Q 8, 10, 11, 18 KEY A 32 ¢ ¢ ¢ ¢ / 4 4 4 4 7 .
MEMO ME MO . f m Pag e 1 W e d n e sd a y ,J an u a r y 21, 2004 6: 03 PM.
MEMO ME MO . f m Pag e 2 W e d n e sd a y ,J an u a r y 21, 2004 6: 03 PM.
MEMO ME MO . f m Pag e 2 W e d n e sd a y ,J an u a r y 21, 2004 6: 03 PM.
0205AIMMDWJEM EN, CS © 2005 Victor Company of Japan, Limited Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada, and U.K.) CAUTION for mains (AC) line BEFORE PLUGGING IN, do check.
An important point after buying a device JVC DX-T5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC DX-T5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC DX-T5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC DX-T5 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC DX-T5 will certainly help you make a decision on the purchase.
If you already are a holder of JVC DX-T5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC DX-T5.
However, one of the most important roles played by the user manual is to help in solving problems with JVC DX-T5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC DX-T5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
