Instruction/ maintenance manual of the product Camcorder JVC
Go to page of 44
2 EN Dear Customer , Thank you for purchasing the JVC Compact VHS camcorder . Before use, please read the safety informa- tion and precautions contained in the following pages to ensure safe use of your new camcorder. W arning on lithium battery The battery used in this device may present a fire or chemical burn hazard if mistreated.
EN 3 n Program Manager II ( Z pg. 18 – 31) n Programme AE with Special Effects ( Z pg. 18, 19) •Auto Mode Lock •Auto Mode Release •Electronic Fog Filter •ND Ef fect •Sepia •T wilight •Sports •1/1000 sec. High Speed Shutter •1/2000 sec.
4 EN GETTING ST ARTED Power This camcorder’s 3-way power supply system lets you choose the most appropriate source of power . NOTES: ● No function is available without power supply . ● Use only specified power supply . ● Do not use provided power supply units with other equipment.
EN 5 CHARGE MARKER A charge marker is provided on the battery pack to help you remember whether it has been charged or not. T wo colours are provided (red and black)—you choose which one means char ged and which means dischar ged.
6 EN GETTING ST ARTED (cont.) Clock (Lithium) Battery Inser tion/Removal This battery is necessary for clock operation and to perform date/time settings. SWITCH OFF POWER 1 Switch off the unit’ s power and remove the power supply unit. OPEN COVER 2 Open the clock battery compartment cover while pressing the release tab.
EN 7 Date/T ime Setting ACCESS MENU SCREEN 1 First set the Power Switch to “CAMERA”. T urn the Select Dial to any position except AUTO LOCK, then press the MENU Jog Dial. SELECT FUNCTION 2 Rotate the MENU Jog Dial to move the highlight bar to “DA TE/TIME”, then press it.
8 EN GETTING ST ARTED (cont.) T ape Length Setting Set the tape length according to the length of the tape used. ACCESS MENU SCREEN 1 First set the Power Switch to “CAMERA”. T urn the Select Dial to any position except AUT O LOCK, then press the MENU Jog Dial.
EN 9 2 2 3 3 1 1 Erase Protection Gear T urn to take up slack. Loading/Unloading A Cassette OPEN CASSETTE HOLDER 1 Slide EJECT until the holder opens. Do not use force to open. INSER T/REMOVE CASSETTE 2 Make sure the label is facing outward. CLOSE CASSETTE HOLDER 3 Press PUSH and make sure the holder is closed and locked.
10 EN GETTING ST ARTED (cont.) Grip Adjustment EXP AND LOOP 1 Separate the V elcro strip. INSER T HAND 2 Pass your right hand through the loop and grasp the grip. ADJUST STRAP LENGTH 3 Adjust so your thumb and fingers can easily operate the Recording Start/Stop Button and Power Zoom Button.
EN 11 CAUTION: When using a tripod, be sure to open and extend its legs fully to stabilize the camcorder . T o prevent damage to the unit caused by falling over , do not use a small-sized tripod. T ripod Mounting ALIGN AND TIGHTEN 1 Align the screw and camera direction stud on the tripod with the camera’ s mounting socket and stud hole.
12 EN RECORDING Basic Recording NOTE: Y ou should already have performed the procedures listed below . If not, do so before continuing. ● Power ( Z pg. 4) ● T ape Length Setting ( Z pg. 8) ● Recording Mode Setting ( Z pg. 8) ● Grip Adjustment ( Z pg.
EN 13 STOP RECORDING 4 Press the Recording Start/Stop Button again to stop recording. • The camcorder re-enters the Record-Standby mode. NOTES: ● A cassette holder can’t be opened unless a power supply is attached. ● There may be a delay after you slide EJECT until the holder opens.
14 EN RECORDING Basic Features FEA TURE: Zooming PURPOSE: T o produce the zoom in/out effect, or an instantaneous change in image magnification. OPERA TION: Zoom In Press the “T” of the Power Zoom Button. Zoom Out Press “W” of the Power Zoom Button.
EN 15 FEA TURE: Quick Review PURPOSE: T o check the end of the last recording. OPERA TION: 1) Press “ ” and release quickly during the Record-Standby mode. n T ape is rewound for about 2 seconds and played back automatically , then pauses in Record-Standby mode for the next shot.
16 EN RECORDING Basic Features (cont.) FEA TURE: Video Light PURPOSE: T o brighten the scene when natural lighting is too dim. OPERA TION: 1) Set the LIGHT OFF/AUTO/ON Switch as required: ON : Always keeps the light on as long as the camcorder is turned on.
EN 17 FEA TURE: Date/T ime/Character Insert PURPOSE: T o display the date and time in the viewfinder or on a connected colour monitor , as well as to record them manually or automatically. OPERA TION: 1) T urn the Select Dial to any position except AUTO LOCK.
18 EN SEPIA 1 / 1 0 0 0 1 / 2 0 0 0 F G N D A U T O M O D E L O C K R E L E A S E WIDE TITLE EFFECT SUPER LOLUX Programme AE With Special Effects All you have to do to access any of the variety of shooting effects is to turn the Select Dial. SELECT MODE 1 T urn the Select Dial until the symbol of the function you want is aligned with the mark.
EN 19 Dial V iewfinder Mode symbol indication Auto Mode Lock LOCK AUTO LOCK Auto Mode Lock Locks the camcorder in Full Auto mode, preventing incorrect operation due to accidental button pressing during shooting. • In this mode the following controls are disabled; DA TE/TIME display select, and the Menu Jog Dial.
20 EN RECORDING Advanced Features (cont.) Fader This feature allows smooth fade-in and fade-out to black blank screen. Fade-in works at recording start, and fade- out works at recording end or when you enter Record- Standby mode. ENGAGE F ADE-ST ANDBY MODE 1 Press EFFECT to engage the Fade-Standby mode.
EN 21 Super LoLux(Gain Up) Bright, natural recordings can be taken even in areas with low or poor lighting. SELECT SUPER LOLUX MODE 1 Press SUPER LOLUX repeatedly to cycle through the modes as shown to the left. Once the desired mode appears, it is engaged.
22 EN MENU MENU 4 MENU END FOCUS EXPOSURE DATE T IME TELE MACRO TAPE LENGTH M. W. B. ZOOM SPEED 4 NE X T AUTO AUTO 25. 12. 98 OFF T30 AUTO FAST 4 BACK REC T IME INT.
EN 23 Using Menu For Detailed Adjustment This camcorder is equipped with an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings. ACCESS MENU SCREEN 1 T urn the Select Dial to any position except AUT O LOCK, then press the MENU Jog Dial.
24 EN RECORDING Advanced Features (cont.) FOCUS AUTO Adjusts focus automatically . MANU Allows you to adjust focus manually ( Z pg. 26, 27). EXPOSURE AUTO Adjusts exposure automatically . MANU Allows you to adjust exposure manually ( Z pg. 28). DA TE/TIME Allows you to set the current date and time ( Z pg.
EN 25 REC TIME This feature allows you to set the parameters for Animation and T ime-Lapse recording ( Z pg. 31). INT . TIME This feature allows you to set the parameters for Self-T imer ( Z pg. 30) and T ime- Lapse recording ( Z pg. 31). T ALL Y LAMP ON The tally lamp comes on to signal the start of recording.
26 EN RECORDING Advanced Features (cont.) Focusing Auto Focus The camcorder’s Full Range AF system offers continuous shooting ability from close-up to infinity . However , correct focus may not be obtainable in the situations listed below (in these cases use manual focusing): • When two subjects overlap in the same scene.
EN 27 Manual Focus NOTE: Y ou should already have made the necessary viewfinder adjustments ( Z pg. 10). If you haven’ t, do so before continuing. ACCESS MENU SCREEN 1 T urn the Select Dial to any position except AUT O LOCK, then press the MENU Jog Dial.
28 EN RECORDING Advanced Features (cont.) Exposure Control This feature automatically adjusts the iris for the best available picture quality , but you can override and make the adjustment manually . ACCESS MENU SCREEN 1 T urn the Select Dial to any position except AUTO LOCK, then press the MENU Jog Dial.
EN 29 MENU 4 MENU END FOCUS EXPOSURE DATE T IME TELE MACRO TAPE LENGTH M. W. B. ZOOM SPEED 4 NE X T AUTO AUTO 25. 12. 98 OFF T30 AUTO FAST AUTO : FINE : CLOUD : HALOGEN MWB EX I T M. W. B. Manual White Balance Adjustment (M.W .B.) The white balance is usually adjusted automatically .
30 EN RECORDING Advanced Features (cont.) Self-Timer Y ou can set the delay between pressing the Recording Start/Stop Button and the actual start of recording. If you secure the camcorder , you (or whomever is operating the camcorder) can enter the scene before recording starts.
EN 31 Animation Give stationary scenes or objects an illusion of movement. This function allows you to shoot a series of pictures, each slightly different, of the same object for a brief period of time. NOTE: Make sure the camcorder is in the Record-Standby mode and the recording mode is set to “SP” before performing the following steps.
32 EN PLA YBACK Basic Playback LOAD A CASSETTE 1 Slide EJECT to open the cassette holder , then insert the cassette with the label facing out. Press PUSH to ensure the holder is closed and locked. SELECT MODE 2 Set the Power Switch to “PLA Y”. The power indicator lights.
EN 33 PLA YBACK Features T racking This function can be used to eliminate noise bars that appear on-screen during playback. Initial setting is Auto T racking. Manual T racking is also available. ACTIV A TE MANUAL TRACKING 1 Press the MENU Jog Dial during playback mode.
34 EN PLA YBACK Featur es (cont.) FEA TURE: Still Playback PURPOSE: T o pause during playback. OPERA TION: 1) Press PLAY/P AUSE during playback. 2) T o resume normal playback, press PLA Y/PAUSE again. NOTE: Noise bars appear and pictures may become monochrome during Still Playback.
EN 35 PLA YBACK Using The Cassette Adapter Cassette Adapter Use this to play back a VHS-C video cassette recorded with this camcorder . It is fully compatible with any VHS video cassette recorder . The C-P7U adapter is battery powered and automatically performs tape loading and unloading.
36 EN There are three basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals. Connection T o A VCR A (Editing, Dubbing and Playback) NOTE: Use the optional Audio and V ideo cables.
EN 37 T APE DUBBING T ape Dubbing CONNECT EQUIPMENT 1 Following the illustration to the left, connect the camcorder and the VCR. PREP ARE FOR DUBBING 2 Set the camcorder ’ s Power Switch to “PLA Y”, turn on the VCR’ s power , and insert the appropriate cassettes in the camcorder and the VCR.
38 EN TROUBLESHOOTING SYMPTOM POWER No power is supplied. The power suddenly goes off and doesn’t come back on by itself. RECORDING Recording cannot be performed. Recording does not start. PLA YBACK The tape is running, but there’ s no playback picture.
EN 39 SYMPTOM OTHER The tape won’t eject. Some functions are not available. V ertical white lines appear when shooting a very bright object. Bright, crystal-shaped spots appear in the viewfinder . The viewfinder and the lens have become dirty (ex. fingerprints).
40 EN INDEX 4 3 u p i o 1 9 0 ! 5 6 7 8 ^ ( # % $ @ ) W q w e r & R * t y E T 2 Q.
EN 41 Controls 1 Power Zoom Button ........................... Z pg. 14 2 Select Dial ......................................... Z pg. 18 3 Multi-Function Control • EFFECT Button ................................. Z pg. 20 • WIDE Button ............
42 EN REC SP 30MIN 444 4 S.L X T 3 0 01 MWB NORM 5MIN 1 4S LENS COVER PAUSE MERRY CHRISTMAS TAPE END 1 6 7 2 3 4 5 % ^ & 9 $ 0 # ( * ) 8 ! @ T WILIGHT 25. 12. 98 2 2:5 0:0 0 V iewfinder Indications @ Interval T imer/Recording T ime/ 5Sec. Rec M ode Indicator .
EN 43 NOTES: ● It is normal for the battery pack to be warm after charging, or after use. T emperature Range Specifications Charging ........................... 10°C to 35°C Operation ......................... 0°C to 40°C Storage ...............
44 EN CAUTIONS (cont.) 3. DO NOT leave the unit . . . ..... in places of over 50°C. ..... in places where humidity is extremely low . (below 35%) or extremely high (above 80%). ..... in direct sunlight. ..... in a closed car in summer . ..... near a heater .
EN 45 SPECIFICA TIONS GENERAL Format : VHS P AL standard Power sour ce : DC 6V Power consumption light on : 7.9 W light off : 5.0 W Signal system : P AL-type V ideo recording system Luminance : FM recording Colour : Converted sub-carrier direct recording Conforms to VHS standard Cassette : cassette T ape speed SP : 23.
An important point after buying a device JVC Camcorder (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC Camcorder yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC Camcorder - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC Camcorder you will learn all the available features of the product, as well as information on its operation. The information that you get JVC Camcorder will certainly help you make a decision on the purchase.
If you already are a holder of JVC Camcorder, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC Camcorder.
However, one of the most important roles played by the user manual is to help in solving problems with JVC Camcorder. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC Camcorder along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
