Instruction/ maintenance manual of the product AV-32S33 JVC
Go to page of 56
COLOR TELEVISION USER'S GUIDE For models: AV -36360 AV -36330 AV -36320 AV -36S36 AV -36S33 AV -32360 AV -32330 AV -32320 AV -32S36 AV -32S33 Illustration of A V -32360 and RM-C254 IMPORT ANT NO TE TO THE CUST OMER In the spaces below , enter the model and serial number of your tele vision (located at the rear of the television cabinet).
IMPOR T ANT SAFETY PRECA UTIONS W ARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NO T EXPOSE THIS TV SET TO RAIN OR MOISTURE. CA UTION: TO INSURE PERSONAL SAFETY , OBSER VE THE FOLLOWING R ULES REGARDING THE USE OF THIS UNIT . 1. Operate only from the pow er source specified on the unit.
IMPORT ANT SAFEGU ARDS CA UTION: Please read and retain for y our safety . Electrical energy can perform many useful functions. This TV set has been engineered and manuf actured to assure your personal saf ety . But improper use can result in potential electrical shock or fire hazards .
7 An outside antenna system should not be located in the vicinity of ov erhead power lines or other electric light or power circuits, or where it can f all into such power lines or circuits.
13 F or added protection of the TV set dur ing a lightning stor m or when the TV set is to be left unattended for an e xtended per iod of time, unplug it from the wall outlet and disconnect the antenna. This will prev ent damage to product due to lightning storms or power line surges.
Ta b le of Contents UNP A CKING Y OUR TV . ....7 TV Models and Remote Controls . .......8 Quick Setup Guide . ......1 1 Connections . .........1 4 Cable and VCR Connections . ......1 4 Connecting to a D VD Pla yer . .......1 7 Connecting to an External Amplifier .
VIDEO L MONO AUDIO R INPUT 2 Tw o AA Batteries 1 T ele vision 1 Remote Control Thank you f or your purchase of a JVC Color T elevision. Before y ou begin setting up your ne w television, please chec k to make sure you hav e all of the following items .
TV Models and Remotes Guide NO TE: Before y ou connect your televison to another de vice, please refer to the proper dia- gr ams for y our TV and remote , depending on the model that you ha ve purchased.
Front P anel Diagrams MODELS: A V -32360, A V -32330, A V -32S36 and A V -32S33 MODELS: A V -36360, A V -36330, A V -36S36 and A V -36S33 MODEL: A V -36320 TV Models and Remotes Guide MODEL: A V -3232.
TV Models and Remotes Guide Remote Control RM-C255 MODELS: A V -36330, AV -36S33, AV -32330, AV -32S33 10 Remote Control RM-C205 MODELS: A V -36320, AV -32320 Remote Control RM-C254 MODELS: A V -36360.
11 Getting Started These quick setup pages will pro vide you, in three easy steps, with the basic inf or mation you need to begin using your ne w television right a wa y .
12 WALL CABLE or ANTENNA OUT OR OR VCR IN Cable/RF connector AV Cables/Plugs Step T wo - Making Basic Connections Next y ou will need to connect your television to an antenna or cab le system. The most basic antenna/cable connection is sho wn below . For more detailed connections , such as ones where a cable bo x is required, see pages 15 to 16.
13 Press the " # b uttons to mo ve to A UT O TUNER SETUP Press the $% b uttons to begin A UT O TUNER SETUP $% !! To choose CABLE (if y ou are connected to a cable system) or AIR (if y ou use an a.
Connections VCR W ALL CABLE or ANTENNA OUT OR OR TWO-WA Y SPLITTER 1) Connect the antenna or cab le TV wire from the wall outlet, in to the RF Input of the two-wa y splitter . 2) Connect an RF cable from the one of the RF Outputs on the splitter , in to the RF Input on the back of the VCR.
VCR OR OR W ALL CABLE or ANTENNA OUT Connections 15 1) Connect the antenna or cab le TV wire from the wall outlet, in to the RF Input of the cable box. 2) Connect an RF cable from the RF Output of the cable bo x, in to the RF Input on the back of the VCR.
Connections 16 The connection diagrams are intended to show some basic general connections. Some cable companies may require special connections to pr operly use your televi- sion or 2-tuner PIP function.
DVD Player Y P B P R AUDIO OUT R L Green Blue Red Connections 17 1) Connect Green cable out from D VD pla yer “Y” Component Output, in to TV “VIDEO/Y” Component Input. 2) Connect Blue cab le out from D VD pla yer “P B ” Component Output, in to TV “P B ” Component Input.
Connections 18 1) Connect the yellow video cab le out from the Camcorder’ s Video Output, in to the TV’ s Video Input jack. 2) Connect the white audio cab le out from the Camcorder’ s Left A udio Output, in to the TV’ s Left Audio Input J ack.
Remote Contr ol • Bef ore you can operate the remote control, y ou must first install the batteries (included). See “Changing the Batteries” at the bottom of this page for instructions. (For an illustr ation, please see page 11.) • Press the P O WER b utton to turn the television on or off .
Remote Pr ogramming Setting the CA TV , VCR and DVD Codes Y ou can program y our remote to operate y our cable bo x, satellite receiver , VCR or D VD play er by using the instructions and codes listed below .
Remote Pr ogramming Admiral Aiwa Akai Audio Dynamic Bell & Howell Broksonic Canon CCE Citizen Craig Curtis Mathes Daewoo DBX Dimensia Emerson Fisher Funai G.
Remote Pr ogramming 22 D VD codes Aiwa Apex Denon Hitachi JVC Kenwood Konka Mitsubishi Onkyo Oritron Panasonic Philips Pioneer 043 040 020, 037 030, 031 000 035 039 025 041 044 020 023, 036 022 D VD P.
To bring up the onscreen menu , press the M ENU b utton on the remote control. The item that appears in yello w is the one currently selected. If you press the M ENU b utton again, the onscreen display will skip to the ne xt menu screen.
Onscreen Menus 24 The Onscreen Menu System Y our tele vision comes with JVC’ s Onscreen Menu System. The Onscreen Menus let you mak e adjustments to your tele vision’s operation simply and quic kly . Examples of the Onscreen Menus are shown below and on the ne xt page.
Plug In Menu The Plug In Menu comes up automatically when you first turn on the TV after plugging it in. The Plug In Menu helps you to get y our TV ready to use b y letting you set y our preferences f.
Plug In Menu 26 A uto Clock Set Before y ou use any of your TV’s timer functions , you must first set the cloc k. Y ou may precisely set your cloc k using the XDS time signal broadcast by most Pub lic Broadcasting stations.
Plug In Menu 27 Manual Cloc k Set NO TE: Y ou will hav e to reset the clock after a po wer interruption. Y ou must set the cloc k before operat- ing any timer functions. To set your clock manually (without using the XDS signal), choose MANU AL from the Set Clock menu and f ollow the steps below .
Channel Summary Channel Summary Channel Summary allows you to customize the line-up of channels receiv ed by y our TV . Y ou can add or delete channels from the line-up or prev ent any unauthorized viewers from w atching any or all 181 channels.
29 V -Chip Y our TV is equipped with V -Chip technology which enab les TV P arental Guidelines (for United States and Canada) and Movie (MP AA) Guideline controls. V -Chip technology allows you to program y our TV to receive , or not to receive , programs based on content according to the guidelines.
30 V -Chip US V -Chip Ratings U .S. P ARENT AL RA TING SYSTEMS Programs with the f ollowing ratings are appr opriate for children. ❒ TV Y is Appropriate f or All Children. Programs are created f or ver y young vie wers and should be suitable f or all ages, including children ages 2 - 6.
V -Chip 31 Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV , S, etc.) and press the " or #! to mov e the cursor to the correct location. Press $ or % to turn the locking f eature on or off . An item is locked if the icon appears instead of a “—”.
V -Chip 32 Setting ratings with the V -Chip button Example 2: If you w ant to set your V -Chip settings to block all prog ramming abov e a current setting such as TV PG-V (with violence): Press Z ERO when TV -PG - V is displayed All Programming abo ve TV -PG - V (with Violence) will be bloc ked.
V -Chip ❒ NR - Not Rated. This is a film which has no rating. In many cases these films were impor ted from countries which do not use the MP AA ratings system. Other NR films ma y be from amateur producers who didn’t intend to hav e their film widely released.
V -Chip ❒ E - Exempt. Exempt prog ramming includes: news, spor ts, documentaries and other information programming, talk sho ws, music videos , and variety programming. ❒ C – Programming Intended f or Children. Violence Guidelines: There will be no realistic scenes of violence.
35 V -Chip Unrated Programs Notes About Unrated Programs Unrated programming ref ers to any programming which does not contain a rating signal. Programming on tele vision stations which do not broadcast rating signals will be placed in the “Unrated Programming" category .
36 V -Chip Set Lock Code Channel Guard and V -Chip settings are protected by a four-digit Loc k Code. Y our TV comes pre-set with a Lock Code of "0000". Y ou may change the code to an y four-digit n umber you wish. T o change the Loc k Code, f ollow the steps belo w .
37 Picture Settings Tint Color Picture Bright Detail Tint allows y ou to adjust the lev els of red and green in your TV picture. Press the M ENU bu tton " # To TINT % To increase the lev els of g.
38 This feature inserts a blank blue screen o ver channels which are not broadcasting or are too w eak to be receiv ed clearly . Press the M ENU bu tton " # To NOISE MUTING $% To tur n Noise Muting ON or OFF • Noise Muting will not work during Auto T uner Setup or when you operate Channel Summary .
39 Sound Settings Y ou can increase or decrease the le vel of lo w-frequency sound in the TV’ s audio with the Bass adjustment. Press the M ENU bu tton " # To BASS % To increase the bass $ To decrease the bass " # To move to the ne xt setting Use T reble to adjust the le vel of high-frequency sound in your TV’ s audio .
40 General Items The On/Off timer lets you progr am your tele vision to tur n itself on or off. Y ou can use it as an alarm to wake up , to help you remember important programs, or as a deco y when you're not home.
General Items Many broadcasts now include an onscreen displa y of dialog called Closed Captions. Some broadcasts may also include displa ys of additional information in text f orm. Y our tele vision can access and display this inf or mation using the Closed Caption feature.
Get the best quality video from your D VD play er by using this setting and the D VD inputs at the rear of the television. Set either to YES f or component input (for D VD) or to NO f or composite video input (for a regular VCR).
Button Functions 43 The M ENU b utton allo ws you to access JVC’ s onscreen menu system. Press M ENU to activate the onscreen menu system. • See individual topics (like “Sound Settings) for specific information on using menus. Press the E XIT b utton to lea ve a men u screen.
Button Functions 44 Video Status Sleep Timer Hyper Surround Muting The V IDEO S TA TUS b utton giv es you a choice of three TV picture display settings , including a display of y our own preferences. Standard - Resets the picture displa y to the factory settings.
Button Functions 45 Use the 100+ button to directly access channels abo ve Channel 99. For e xample to move to channel 124, press100+, 2 (two), 4 (f our). 100+ Button Return+ Input Selects the signal input source for the tele vision: TV (for Antenna or Cab le) or Video-1, 2 or 3 f or video de vices like VCR’s , D VD play ers, or camcorders.
Button Functions 46 D VD Buttons (RM-C254, RM-C255 only) VCR Buttons TV/CA TV Switch (RM-C254, RM-C255 only) VCR/D VD Switch (RM-C254, RM-C255 only) Y ou can also use this remote control to operate the basic functions of y our D VD pla yer .
Button Functions - PIP 47 PIP displays tw o separate pictures on screen. Y our television has 2-T uner PIP , meaning you can view pictures from two diff erent channels simultaneously . A special set of PIP control but- tons are located on the upper par t of the remote control.
Button Functions - PIP 48 Freeze Swap Channel +/- for PIP Source Use the F REEZE b utton to loc k a single, still image onto the PIP window . • If PIP is off when F REEZE is pressed, a snapshot of the main screen is taken and placed in the PIP window .
Tr oub leshooting 49 There is no power There is no picture or sound Yo u cannot select a certain channel The power turns off by itself The clock is wrong The color quality is poor The On T imer is bli.
50 W arranty JVC COMP ANY OF AMERICA warrants this product and all par ts thereof , except as set f or th below ONL Y T O THE ORIGINAL PURCHASER A T RET AIL to be FREE FR OM DEFECTIVE MA TERIALS AND W.
51 W arranty 7) Accessories; 8) Batteries (e xcept that Rechargeable Batteries are co vered for 90 da ys from date of purchase.) There are no express warranties except as listed abo ve . THE DURA TION OF ANY IMPLIED W ARRANTIES, INCLUDING THE IMPLIED W ARRANTY OF MERCHANT ABIL TY , IS LIMITED TO THE DURA TION OF THE EXPRESS W ARRANTY HEREIN.
52 A uthorized Ser vice Center s QU ALITY SER VICE T OLL FREE: 1 (800) 537-5722 http://www .jvc.com HO W TO LOCA TE Y OUR JVC SER VICE CENTER Dear Customer , In order to receive the most satisf action from your purchase, please read the instruction booklet before operating the unit.
53 Sear ch Codes Cable/Satellite Sear ch Codes Function: 1) Slide the first 2-W ay Mode Selector s witch to CA TV . 2) Press the TV P O WER and R ETURN +b uttons. Hold for at least three seconds and release. 3) Press TV P O WER , see if the CA TV or Satellite bo x responds.
Specifications 54 MODEL AV -32330 AV -32S33 AV -32320 AV -32360 AV -32S36 AV -36360 AV -36S36 AV -36330 AV -36S33 AV -36320 Reception Format Reception Range Power Consumption Screen Size Audio Output .
Note 55 GE Regular English 3/12/02 2:51 PM Page 55.
JVC COMP ANY OF AMERICA Division of JVC Americas Cor p . 1700 V alley Road Wa yne, New Jerse y , 07470 JVC CANADA, INC. 21 Finchdene Square Scarborough, Ontario Canada, M1X 1A7 GE Regular English 3/12.
An important point after buying a device JVC AV-32S33 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC AV-32S33 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC AV-32S33 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC AV-32S33 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC AV-32S33 will certainly help you make a decision on the purchase.
If you already are a holder of JVC AV-32S33, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC AV-32S33.
However, one of the most important roles played by the user manual is to help in solving problems with JVC AV-32S33. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC AV-32S33 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
