Instruction/ maintenance manual of the product AV-29V314 JVC
Go to page of 24
INSTRUCTIONS GGT0041-001A-H Contents Knowing your TV’ s features ....................................................... 3 Remote control buttons and basic functions .............................. 4 TV buttons and functions .........................
2 15 cm 10 cm 10 cm 15 cm W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE T O RAIN OR MOISTURE. CAUTION: TO ENSURE PERSONAL SAFETY , OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV . 1 Operate only from the power source indicated on the rear of the TV .
3 Knowing your TV’ s features 1 Confirm your TV’ s functions Some functions written in this instruction manual may not be available for your TV . Please see the chart below and check the functions that are equipped for your TV ’ s model number .
4 Remote control buttons and basic functions No. Press T o POWER Turn on or of f the TV from standby mode. MENU/OK Display menu and confirm selected function. 5 / ∞ / 2 / 3 Select and adjust menu function. CHANNEL -/+ Select the desired channel number.
5 Remote control buttons and basic functions (continued) The following chart shows locations of functions in menus. In this manual, location of a function is described as follows: Note: Some functions have the 4th menus as the sub-menus.
6 TV buttons and functions The illustrations shown below is for 29V and 29J series only , which are used for explanation purpose. Y our TV may not look exactly the same as illustrated.
7 1 Connecting the aerial cable. If you connect a VCR, connect the aerial output jack of your VCR and the aerial jack on the TV with the aerial cable. Then connect the output jacks of your VCR and the VIDEO-1 input jacks of the TV with the video cable (or S-VIDEO cable if available) and audio cables.
8 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then the TV will operate by following steps as below: • Press 5 / ∞ button to select your desired language. • TV will start searching for the channels.
9 COLOUR SYSTEM Y ou can select the appropriate colour system when the picture is not clear or no colour appears. Press the COLOUR SYSTEM button to select a setting.
10 Adjusting the picture – USER Y ou can adjust the desired picture setting when selecting USER in PICTURE MODE. 1 Select the USER in PICTURE MODE under PICTURE menu.
11 AI ECO SENSOR (ECO) Y ou can adjust TV screen contrast according to the brightness of your room. Press the ECO button to select the desired mode. 1 Mild contrast (recommended). 2 Even contrast. OFF Cancel the function. T o operate this function with a menu: Y ou can display the graphic of AI ECO SENSOR on the screen.
12 SOUND SYSTEM Y ou can select an appropriate sound system when abnormal sound occurs even when the picture appears normally . Press the SOUND SYSTEM button to select a setting. * The sound system of I, D/K and M are not available for 314 series. This function is not available in video mode.
13 CINEMA SURROUND Y ou can enjoy an enhanced sound for wider audience. Press the CINEMA SURROUND button to select a setting. OFF Cancel the function. LOW Listen to sound with less wider audience effect. HIGH Listen to sound with more wider audience effect.
14 T o register the favorite channel Y ou can register and recall 4 favorite channels by using the colour buttons (red, green, yellow , blue). 1 In TV mode, select a TV channel (PR01-99) you desired to register . 2 Press and hold a colour button for 3 seconds or more.
15 VNR Y ou can reduce the noise. Select the VNR in the PICTURE FEA TURES menu under PICTURE menu, then choose a setting of VNR function. OFF VNR is turned off. AUTO Effect of VNR is automatically controlled. MIN Effect of VNR becomes minimum level. MAX Effect of VNR becomes maximum level.
16 MENU INST ALL menu VIDEO-2 SETTING ❇ AUTO SHUTOFF Y ou can set the TV to turn off automatically when no signal is received for about 15 minutes or longer after the end of a broadcast. Select AUTO SHUT OFF in INST ALL menu, then choose ON or OFF .
17 T o register the TV channels automatically Y ou can register the TV channels into the TV ’ s channel list automatically . 1 Display the INST ALL menu. 2 Choose AUTO PROGRAM, then press the MENU/OK button. AUTO PROGRAM function starts, and the channels received are registered in the channel list (PR list) automatically .
18 T o add in the new channel (INSERT in the EDIT menu) Y ou can add in the new channel in the TV channel list as you like. Y ou need to find the “ CH/CC ” number for the TV channel. Find the “ CH/CC ” number corresponding to the channel number of the TV channel from the attached sheet “ CH/CC number list ” on page 19.
19 TV channel presetting (continued) CH/CC number When you want to use the INSERT function on page 18, find the CH/CC number corresponding to the channel number of the TV channel from this table. Channel No. Country US United States, Philippines, etc.
20 V L R R L / MONO Y C B C R / V V S OVER L R / MONO OUTPUT VIDEO-1 INPUT COMPONENT (VIDEO-2) INPUT . The illustrations shown in this section are for 29V and 29J series only , which are used for explanation purpose. Y our TV may not look exactly the same as illustrated.
21 VIDEO -1 INPUT OUTPUT COMPONENT ( VIDEO-2 ) INPUT BASS SPEAKER OUT C R V MONO L / V Y / V / C B S OVER R T win Port Bass Blaster Unit Additional preparation (continued) Attaching the T win Por t Bass Blaster Unit <A V-29J534/A V -29V534/A V -21V534 only> The T win Port Bass Blaster Unit is packaged together with the TV .
22 T roubleshooting If a problem occurs when you are using the TV , check the below troubleshooting guide before calling for repair . • Deactivate the BLUE BACK function if it is turned on. • Choose the appropriate sound system. Refer to “SOUND SYSTEM” on page 12.
23 Specifications Design and specifications subject to change without notice. Model A V -29J314 A V -29V314 A V -25V314 A V -21V314 A V -21W314 TV RF system B, G (RF mode) P AL, SECAM (VIDEO mode) P AL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Channel and Frequencies VHF low channel (VL) : 46.
24 0604-FLE-JMT © 2004 Victor Company of Japan, Limited Design and specifications subject to change without notice. Model A V -29J534 A V -29V534 A V -29V514 A V -25V514 A V -21V534 A V -21V514 TV RF system B, G, I, D, K, M Colour system (RF mode and VIDEO mode) P AL, SECAM, NTSC 3.
An important point after buying a device JVC AV-29V314 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC AV-29V314 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC AV-29V314 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC AV-29V314 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC AV-29V314 will certainly help you make a decision on the purchase.
If you already are a holder of JVC AV-29V314, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC AV-29V314.
However, one of the most important roles played by the user manual is to help in solving problems with JVC AV-29V314. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC AV-29V314 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
