Instruction/ maintenance manual of the product AV-29MT36 JVC
Go to page of 22
INSTRUCTIONS GGT01 14-001A-H A V -21MT16 A V -29MT16 A V -21MT36 A V -29MT36 A V -25MT16 COLOR TELEVISION EQUALIZER • CINEMA SURROUND • COMPONENT INPUT Contents Knowing your TV’ s features .................................................... 3 Remote control buttons and basic functions .
2 15 cm 10 cm 10 cm 15 cm W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO ENSURE PERSONAL SAFETY , OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV . 1 Operate only from the power source indicated on the rear of the TV .
3 Knowing your TV’ s features 1 EXIT CLOSED CAPTION VNR ECO CINEMA SURROUND BASS RM-C1287 100+ COLOR Main features DVD MENU Just connect DVD player to the television. The television will detect DVD signal and display picture on the screen automatically and you can adjust pictures and sound while you are watching DVD as your desire.
4 Remote control buttons and basic functions 1 6 3 7 9 5 8 2 ! 4 EXIT CLOSED CLOSED CAPTION CAPTION 100+ VNR RM-C1287 COLOR " # No. Press T o 1 POWER T urn on or off the TV from standby mode. 2 MENU/OK Display menu and con fi rm selected function.
5 Remote control buttons and basic functions (continued) The following chart shows locations of functions in menus. In this manual, location of a function is described as follows: Note: Some functions have the 4th menus as the sub-menus. How to operate menus and menus locations T o Operation Note Display the MENU Press the MENU/OK button 2 .
6 TV buttons and functions The illustrations shown below is for 21M, 25M and 29M series only , which are used for explanation purpose. Y our TV may not look exactly the same as illustrated.
7 2 Connecting the compatible main plug to the AC outlet. Setting up your TV CAUTION • T urn off the equipment including the TV before connecting. (1) (2) (3) 1 Connecting the aerial cable. 3 Inserting batteries into the remote control. Insert two batteries by following the + and - polarities and inserting the - end fi rst.
8 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps as below: • Press 5 , ∞ button or CH +/- key to select AIR or CABLE, press the MENU/OK button. • TV will start searching for the channels.
9 COLOR SYSTEM Y ou can select the appropriate color system when the picture is not clear or no color appears. Press the COLOR SYSTEM button to select a setting.
10 PICTURE SETTING Y ou can adjust the desired picture setting when selecting USER in PICTURE MODE. 1 Select the USER in PICTURE MODE under PICTURE menu.
11 AI ECO SENSOR (ECO) Y ou can adjust TV screen contrast according to the brightness of your room. Press the ECO button to select the desired mode. OFF Cancel the function. MODE-1 Mild contrast (recommended). MODE-2 Even contrast. DISPLA Y Display the graphic of the function.
12 SUPER BASS (BASS) Y ou can enjoy powerful bass sound with the T win Port Bass Blaster unit. Press the BASS button to select ON or OFF . T o operate this function with a menu: For attaching the T win Port Bass Blaster unit, please see in page 19.
13 CINEMA SURROUND Y ou can enjoy an enhanced sound for wider audience. Press the CINEMA SURROUND button to select a setting. OFF Cancel the function. ON Listen to sound with wider audience effect. This function is not available when the SOUND MODE is set to SOUND TURBO.
14 DVD function AUTO SIGNAL DETECT When the DVD input signal is detected. The input mode will be changed to VIDEO-2 automatically . For The DVD player , press the “POWER ON” button of the machine so that the signal can be detected.
15 Customized setting VNR Y ou can reduce the picture noise. Select the VNR in the PICTURE menu, then choose a setting of VNR function. OFF VNR is turned off. AUTO Effect of VNR is automatically controlled. MIN Effect of VNR becomes minimum level. MAX Effect of VNR becomes maximum level.
16 Customized setting (continued) VIDEO-2 SETTING Y ou can set the VIDEO-2 SETTING according to the video signal output from the external devices connected to the VIDEO-2 terminal. Select the VIDEO-2 SETTING in INST ALL menu, then choose a setting (Factory setting is COMPONENT).
17 To register the TV channels automatically (AUTO PROGRAM) Y ou can register the TV channels into the TV’s channel list automatically . 1 Display the INST ALL menu. 2 Choose AUTO PROGRAM, then press the MENU/OK button. 3 Press the 5 / ∞ button to select AIR or CABLE, then press the MENU/OK button.
18 V L R R L / MONO Y C B C R / V V S OVER L R / MONO OUTPUT VIDEO-1 INPUT COMPONENT (VIDEO-2) INPUT V L R R L / MONO Y C B C R / V V S OVER L R / MONO OUTPUT VIDEO-1 INPUT COMPONENT (VIDEO-2) INPUT BASS SPEAKER OUT The illustrations shown in this section are for 21M, 25M and 29M series only , which are used for explanation purpose.
19 2 Firmly insert the T win Port Bass Blaster Unit connector into the BASS SPEAKER OUT terminal. T win Port Bass Blaster Unit Additional preparation (continued) Attaching the Twin Port Bass Blaster Unit <A V -21MT36/A V -29MT36 only> The T win Port Bass Blaster Unit is packaged together with the TV .
20 T roubleshooting If a problem occurs when you are using the TV , check the below troubleshooting guide before calling for repair . • No picture, no sound • Deactivate the BLUE BACK function if it is turned on. • Snowy picture • Check the aerial cable and its connection with the TV .
21 Speci fi cations TV RF systems M, N Color systems NTSC, P AL-M, P AL-N Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band.
© 2006 Victor Company of Japan, Limited 0306-FLE-JMT GGT0114-001A-H.indd 22 GGT0114-001A-H.indd 22 23.01.2006 11:11:04 Uhr 23.01.2006 11:11:04 Uhr.
An important point after buying a device JVC AV-29MT36 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC AV-29MT36 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC AV-29MT36 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC AV-29MT36 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC AV-29MT36 will certainly help you make a decision on the purchase.
If you already are a holder of JVC AV-29MT36, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC AV-29MT36.
However, one of the most important roles played by the user manual is to help in solving problems with JVC AV-29MT36. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC AV-29MT36 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
