Instruction/ maintenance manual of the product AV-27WF36 JVC
Go to page of 44
Color T elevision Users Guide For Models: A V -27WF36 A V -32WF36 A V -27SF36 A V -32SF36 A V -27CF36 A V -32CF36 Important Note: In the spaces below , enter the model and serial number of your television (located at the rear of the television cabinet).
2 Important Safety Precautions CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN CAUTION: T o reduce the risk of electric shock. Do not remove cover (or back).
3 • As an “ENERGY ST AR ® ” partner , JVC has determined that this product or product model meets the “ENERGY ST AR ® ” guidelines for energy ef fi ciency . Important Safeguards CAUTION: Please read and retain for your safety . Electrical energy can perform many useful functions.
4 7 An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
5 13 For added protection of the TV set during a lightning storm or when the TV set is to be left unattended for an extended period of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to product due to lightning storms or power line surges.
6 T able of Contents Unpacking your TV . . . . . . . . . . . . 7 TV Models . . . . . . . . . . . . . . . . 8 TV Remote Control . . . . . . . . . . . 9 Getting Started . . . . . . . . . . . . . 10 The Remote Control . . . . . . . . . . 10 Connecting Y our Devices .
7 CR2032 1 T elevision 1 Remote Control We recommend that before you start using your new television, you read your entire User’s Guide so you can learn about your new television’s many great features. If you’re anxious to start using your television right away , a quick setup guide follows on the next few pages.
8 Quick Setup TV Models NOTE: Before you connect your television to another device, please refer to the proper diagrams for your specific TV and remote. These will help assist you in understanding how to connect your television to another device, as well as use the remote to set up your television.
9 • For information on remote control buttons, see pages 37 - 40. MODELS: A V -27WF36 A V -32WF36 A V -27SF36 A V -32SF36 A V -27CF36 A V -32CF36 Quick Setup TV Remote Control RM-C203G 1 23 4 56 7 89 0 VIDEO STATUS POWER DISPLAY MUTING CHANNEL PLAY STOP TV VCR POWER VCR CONTROL C.
10 Quick Setup Getting Started These quick setup pages will provide you, in three easy steps, with the basic information you need to begin using your new television right away . If you have questions, or for more detailed information on any of these steps, please consult other sections of this manual.
11 Quick Setup Connections Please follow the flow chart below to determine which connection setup is right for you. Then, refer to the appropriate diagrams to connect your television to other devices that you may have. After you are finished connecting your devices, plug the power cord into the nearest power outlet and turn on the TV .
12 Notes: • If your VCR is a mono sound unit, it will have only one audio out jack. Connect it to the TV’ s LEFT AUDIO INPUT . • Use the S-Video connection if possible for superior picture quality . • Y our VCR must be turned on to view premium cable channels.
13 Notes: • Green, blue and red are the most common colors for DVD cables. Some models may vary colors. Please consult the user ’s manual for your DVD player for more information. • Be careful not to confuse the red DVD cable with the red audio cable.
14 1) Connect a yellow composite cable from the camcorder VIDEO OUT , into the VIDEO IN on the front of the TV . 2) Connect a white composite cable from the camcorder LEFT AUDIO OUT , into the LEFT AUDIO IN on the front of the TV . 3) Connect a red composite cable from the camcorder RIGHT AUDIO OUT , into the RIGHT AUDIO IN on the front of the TV .
15 When you turn your television on for the first time the interactive plug-in menu will appear . The plug-in menu helps you to get your TV ready to use by letting you set your preferences for: • The language in which you want the onscreen menus to appear .
16 (T o be continued...) Quick Setup Plug-In Menu T o set your clock manually (without using the XDS signal), choose MANUAL. If you choose AUTO, see auto clock set above.
17 In auto tuner setup, the TV automatically scans through all available channels, memorizing the active ones and skipping over blank ones or channels with weak signals. This means when you scan (using the C HANNEL +/– buttons) you will receive only clear , active channels.
18 T o bring up the onscreen menu , press the M ENU button on the remote control. The item that appears in yellow is the one currently selected. If you press the M ENU button again, the onscreen display will skip to the next menu screen.
19 Press the M ENU button Onscreen Menus INITIAL SETUP 01 PICTURE ADJUST 01 PICTURE ADJUST 02 SOUND ADJUST CLOCK/TIMERS INITIAL SETUP 02 INITIAL SETUP 2/2 PREVIOUS AUTO TUNER SETUP CHANNEL SUMMARY V.
20 Initial Setup Auto T uner Setup The auto tuner setup function is described on page 17 as the interactive plug-in menu (A V -27WF36, A V -32WF36, A V -27SF36 and A V -32SF36 ONL Y). If you need to run the auto tuner setup again, follow the steps below .
21 Initial Setup Channel Guard Message Y ou can customize the V -Chip settings of your television to match your personal tastes. The V -Chip menu below is the starting point for your V -Chip settings .
22 Y ou can block programs that are not rated. Press the M ENU button π † T o V -CHIP √ ® T o operate (The lock icon appears) Press Z ERO to access V -Chip setup options π † T o UNRA TED √ .
23 U.S. P ARENT AL RA TING SYSTEMS Programs with the following ratings are appropriate for children. ❒ TV Y is Appropriate for All Children Programs are created for very young viewers and should be suitable for all ages, including children ages 2 - 6.
24 Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV , S, etc.) and press the π or † to move the cursor to the correct location. Press √ or ® to turn the locking feature on or off. An item is locked if the icon appears instead of a “—”.
25 Initial Setup ❒ NR – Not Rated This is a film which has no rating. In many cases these films were imported from countries which do not use the MP AA ratings system. Other NR films may be from amateur producers who didn’t intend to have their film widely released.
26 Press the M ENU button π † T o V -CHIP √ ® T o operate (lock icon appears) Press Z ERO to access V -Chip setup options π † T o SET CANADIAN RA TINGS ENG (for English) √ ® T o enter rati.
27 Channel guard and V -Chip settings are protected by a four-digit lock code. Y our TV comes preset with a lock code of “0000”. Y ou may change the code to any four-digit number you wish.
28 The language function is described on page 15 as the interactive plug-in menu (A V -27WF36, A V -32WF36, A V -27SF36 and A V -32SF36 ONL Y). If you need to choose the language again, follow the steps below . Press the M ENU button π † T o LANGUAGE √ ® T o choose a language: ENG.
29 Initial Setup This allows you to lock the keys on the front of the TV , so that a child may not accidentally change your viewing preferences. Press the M ENU button π † T o FRONT P ANEL LOCK √.
30 This function is used to label video input connections for the onscreen displays. Press the M ENU button π † T o VIDEO INPUT LABEL √ ® T o operate π † T o select the desired video input .
31 Press the M ENU button π † T o TINT , COLOR, PICTURE, BRIGHT or DET AIL √ ® T o enter √ ® T o adjust the setting π † T o move to the next setting Press the E XIT button when finished Note: • If you press the 0 button, you can reset the setting to the factory default setting.
32 This feature inserts a blank blue screen over channels which are not broadcasting or are too weak to be received clearly . Press the M ENU button π † T o NOISE MUTING √ ® T o turn noise muting ON or OFF Press the E XIT button when finished Note: • Noise muting will not work during auto tuner setup or when you operate channel summary .
33 MTS technology allows several audio signals to be broadcast at once, giving you a choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an MTS broadcast may also include a second audio program (SAP) .
34 Clock/T imers Set Clock The set clock function is described on page 16 as the interactive plug-in menu. (A V -27WF36, A V -32WF36, A V -27SF36 and A V -32SF36 ONL Y). Y ou can choose to set the clock automatically , or manually . If you need to set the clock again, follow the steps below .
35 The on/off timer lets you program your television to turn itself on or of f. Y ou can use it as an alarm to wake up, to help you remember important programs, or as a decoy when you’re not home.
36 Clock/T imers World Clock The world clock feature provides time differences for some of the major cities around the world in real time. Press the M ENU button π † T o WORLD CLOCK √ ® T o oper.
37 T urns the TV on or of f. Press the P OWER button Power Use the number buttons on the remote control to move directly to a specific channel. For example, to move to channel 7: 0 (Zero) 7 (Seven) Number Buttons - 10Key Pad Use the 100+ button to directly access channels above channel 99.
38 Button Functions The R ETURN + button has two functions: Return - Returns to the channel viewed just before the channel currently onscreen. Return+ - Lets you program a specific channel to return to while scanning through the channels using the CH+ and CH– buttons.
39 The display screen shows the current status of timers, inputs, and XDS ID. Press the D ISPLA Y button The screen to the right shows the following information: • The current channel or A V input (.
40 Button Functions C.C. (Closed Caption) Use the C.C. (Closed Caption) button to select the mode of closed caption. Press the C.C. button • See page 28 when you set the caption/text mode. OFF CAPTION TEXT The V IDEO S T ATUS button gives you a choice of four TV picture display settings, including a display of your own preferences.
41 T roubleshooting There is no power There is no picture or sound Y ou cannot select a certain channel The power turns off by itself The clock is wrong The color quality is poor The On T imer is blin.
42 LCT1786-001A-A ENG1 42 1/11/05, 9:27:26 AM.
43 LCT1786-001A-A ENG1 43 1/11/05, 9:27:26 AM.
MODEL Reception Format Reception Range Power Consumption Screen Size Audio Output Speakers Antenna T erminal External Input Jacks Audio Output Jacks (FIX) Dimensions (In) WxHxD (cm) Weight (lbs / kg) .
An important point after buying a device JVC AV-27WF36 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC AV-27WF36 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC AV-27WF36 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC AV-27WF36 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC AV-27WF36 will certainly help you make a decision on the purchase.
If you already are a holder of JVC AV-27WF36, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC AV-27WF36.
However, one of the most important roles played by the user manual is to help in solving problems with JVC AV-27WF36. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC AV-27WF36 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
