Instruction/ maintenance manual of the product AV-14JT5EU, AV-21JT5EU JVC
Go to page of 29
A V -14JT5EU / A V -21JT5EU A V -14JT5EU A V -21JT5EU VICTOR COMPANY OF JAPAN, LIMITED PMJV1V2022 0500-T-CR-DW 2000 VICT OR COMP ANY OF JAP AN, LIMITED COLOUR TELEVISION VIDEO AUDIO P TV/AV INSTRU.
ADDITIONAL INFORMA TIONS FOR THE SET SOLD IN GREA T BRIT AIN The appliance is supplied with a moulded three pin main plug fitted with 5Amp fuse. Should the fuse require replacement, it must be replaced with a fuse rated at 5 amp and approv ed by AST A or BSI to BS1362.
IMPOR T ANT SAFEGU ARDS ................................ 2 BEFORE LA UNCHING ......................................... 3 CONNECTING THE EXTERNAL EQUIPMENT .... 4 IDENTITY OF FEA TURES ON LOCAL AND REMO TE CONTR OL .....................................
2 IMPOR T ANT SAFEGU ARDS W A TER AND MOISTURE Ne ver install the set in the f ollowing places; In a wet basement, bath- room. Do not place any container with liquid on the set.
3 INSER TING BA TTERIES INT O THE CONTROL UNIT Inser t the batter ies (two 1.5V , type AAA(R03)) MAINS CONNECTION Plug the mains cable into the po wer soc ket with 230V/50Hz A C. AERIAL CONNECTION When using an outdoor aerial, it is usually con- nected to the set b y means of 75 ohms.
4 TV and A V Use the A V button on the remote control, or on the front of the set to select one of the three options. Whenev er the A V button is pressed, on the on-screen displa y will be changed as shown: A V S-VHS TV SCAR T JA CK ( ): This is used to connect a VCR 1 , a PERI-TV decoder 2 , a Camcoder or a video game console .
5 FRONT A V JA CK (A UDIO/VIDEO) Connect the A V (Audio/Video) soc ket with an appreciate cab le to the corresponding sock et of the e xter nal equipment.
6 IDENTITY OF FEA TURES ON LOCAL AND REMO TE CONTR OL LOCAL CONTR OL Fr ont VIDEO AUDIO P TV/AV VIDEO A UDIO P TV/A V MAIN POWER BUTT ON PROGRAMME DOWN/UP BUTT ONS V OLUME DOWN/UP BUTT ONS AV BUTT ON .
7 1 PO WER 2 NUMBER 0-9 3 P . MODE/OK 4A V 5 (PR/CURSOR) UP 6 V OLUME UP (CURSOR RIGHT) 7 MENU 8 (PR/CURSOR) DO WN 9 V OLUME DOWN (CURSOR LEFT) 10 MUTING 11 RECALL 12 SLEEP 13 Not used 14 MO VE 15 SKIP 16 TV/TEXT 17 DELETE 18 MODE 19 VCR/ /D VD switch 20 VCR/D VD Control buttons REMO TE CONTROL 3 1 2 6 4 5 9 7 8 0 P P AV P .
8 USING THE MENU A UT O SETUP INST ALLA TION Read this “INST ALLA TION” before using the TV f or the first time. 1 Press the MENU b utton to dis- pla y the MENU . T o e xit the MENU , press the MENU b utton again. 2 Select the sub-men u title with the UP/ DO WN buttons , then press the RIGHT b utton to displa y the sub-menu.
9 LANGU A GE SELECTION 1 Select LANGU A GE from the MENU with the UP/DO WN but- tons, then press the RIGHT b ut- ton. P P Menu Picture Timer Language Install P P Deutsch Italiano Espanol Nederlands Svenska English Francais 2 Select the required language with the UP/DO WN buttons .
10 USING THE EDIT MENU SKIP INST ALLA TION 1 Select INST ALL from the MENU with the UP/DO WN buttons , then press the RIGHT b utton. Menu Picture Timer Language Install P P Menu Picture Timer Language Install P P Install Auto setup Manual tune Fine tune Edit 3 Use the UP/DO WN buttons to select the n umber of the programme y ou want to edit.
11 2 Select EDIT with the UP/DO WN buttons , then press the RIGHT button. P P Install Auto set up Manual tune u Fine tune Edit P P Edit Pr Name Ch Picture Sound Skip 01 ----- C01 Euro BG No 02 ----- C.
12 MO VE CH. (CHANNEL) INST ALLA TION 1 The MO VE function can be used to mov e a channel to a different progr amme number . Press the MO VE button to star t the MO VE function. 2 Use the UP/DO WN buttons to select the progr amme number to which you want to mo ve the channel and press the MO VE button again.
13 1 If the picture is not displa yed correctly , use the PICTURE func- tion to change the colour system. Use the LEFT/RIGHT b uttons to mov e the cursor to below “PIC- TURE”. 2 Use the UP/DO WN buttons to select the colour system which displa ys the picture correctly .
14 INST ALLA TION MANU AL TUNE FINE TUNE Manually register the channel to a progr amme number . When no menu is displa yed, use the UP/ DO WN buttons or the NUMBER 0-9 b uttons to select the program number to which y ou want to register the channel.
15 3 Select MANU AL TUNE with the UP/DO WN buttons . 4 Press the LEFT/RIGHT b uttons to search f or a channel. Scanning stops when the TV finds a channel.
16 D AIL Y USE SELECTING A PR OGRAMME NUMBER The set has a total of 100 progr amme numbers, 0...99. The NUMBER button 0...9 are used f or direct programme selection. In order two digit prog ramme, press the second numbered b utton within two seconds .
17 RECALL The RECALL b utton is used to display the current status: programme n umber , station name, cloc k. This displa y appears f or 5 seconds unless any b utton is pressed.
18 D AIL Y USE PICTURE ADJUSTMENT 1 Press the MENU b utton, then press the RIGHT b utton. 2 Select an item with the UP/DO WN b uttons, then adjust it with the LEFT/ RIGHT b uttons .
19 3 When the adjustments ha v e been completed, press the MENU b utton twice and e xit from the MENU . Note: Y our adjustments are automatically stored in the F A V OURITE mode of PICTURE MODEs. Contrast 38 MENU 2 Use the f ollowing b uttons to operate the menus .
20 D AIL Y USE USING THE TIMER MENU CLOCK 1 Select TIMER from the MENU with the UP/DO WN buttons , then press the RIGHT b utton. 2 Use the UP/DO WN buttons to select the item and use the RIGHT b utton to mov e the cursor to the setting position.
21 3 P erf or m the settings in accord- ance with the e xplanations of CLOCK, W AKE UP and A UT O CLOCK. 4 When the operation has been completed, press the MENU b utton twice and exit from the MENU .
22 D AIL Y USE W AKE UP CHILD LOCK 1 Y ou can use the W AKE UP func- tion to automatically tur n the TV on at a set time. Y ou can also select the channel to be display ed when the TV is tur ned on. Select W AKE UP from the TIMER menu with the UP/DO WN buttons, then press the RIGHT button.
23 3 Select TIME with the UP/DO WN b uttons , then press the RIGHT b utton. 4 Use the UP/DO WN buttons and RIGHT b utton to set the time at which y ou want the TV to be tur ned on. When the set- ting is completed, press the RIGHT b utton. Clock Wake up Time Prog.
24 TELETEXT 1-SWITCHING TELETEXT ON/OFF Set the VCR/ /D VD switch to the (te xt) position, then press the TELETEXT button ( ). T o retur n to the TV mode, press the TELETEXT button again. Note: Some of the b uttons may not work if the VCR/ /D VD switch is not set to the (te xt) position.
25 6-CALLING UP SUBP A GE DIRECTL Y Pressing the SUBP AGE, ( ), button, “Sub-Code – – – –” appears beside page number . Enter the subpage number that y ou want to call up with the NUMBER b utton 0...9, for e xam- ple, the 2nd page , sequence 0002.
26 TR OUBLESHOO TING • If the plug is disconnected from the A C socket, or the TV aerial has problems, y ou may think there is a problem with the TV itself. Be sure to check the f ollowing bef ore calling f or ser vice . IMPORT ANT • Re view all instructions in this manual Action • Inser t the plug in an A C socket.
27 Item A V -14JT5EU A V -21JT5EU TV RF systems CCIR B/G, I, D/K, L Colour systems P AL, SECAM (NTSC 3.58 / 4.43 MHz only in A V modes) Channels and frequencies E2-E12, E-21-E69, S1-S41, X, Y , Z, Z+1.
An important point after buying a device JVC AV-14JT5EU, AV-21JT5EU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC AV-14JT5EU, AV-21JT5EU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC AV-14JT5EU, AV-21JT5EU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC AV-14JT5EU, AV-21JT5EU you will learn all the available features of the product, as well as information on its operation. The information that you get JVC AV-14JT5EU, AV-21JT5EU will certainly help you make a decision on the purchase.
If you already are a holder of JVC AV-14JT5EU, AV-21JT5EU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC AV-14JT5EU, AV-21JT5EU.
However, one of the most important roles played by the user manual is to help in solving problems with JVC AV-14JT5EU, AV-21JT5EU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC AV-14JT5EU, AV-21JT5EU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
