Instruction/ maintenance manual of the product AV 27D502 JVC
Go to page of 52
COLOR TELEVISION USER'S GUIDE For models: A V -36D502 A V -36D302 A V -36D202 A V -32D502 A V -32D302 A V -32D202 A V -27D502 Illustration of AV -32D502 and RM-C301G IMPOR T ANT NOTE T O THE CUSTOMER In the spaces below, enter the model and serial number of your television (located at the rear of the television cabinet).
IMPORT ANT SAFETY PRECAUTIONS W ARNING: TO PRE VENT F IRE OR SHO CK HAZ ARDS , D O NOT E XPO SE THIS T V SET T O R AIN OR MOIS TURE. CAUTION: TO INSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS UNIT . 1 . Operate only from the power source specified on the unit.
IMPOR T ANT SAFEGUARDS CAUTION: Please read and retain for your safety . Electrical energy can perform many useful functions. This TV set has been engineered and manufactured to assure your personal safety. But improper use can result in poten - tial electrical shock or fire hazards.
7 An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
13 F or ad de d p r ot ec ti on of th e T V se t d ur in g a li gh tn in g s to r m o r w he n t he TV se t i s t o b e l ef t u na tt en de d f or an ex te nd ed pe ri od of ti me , u np lu g i t f r om th e w al l ou tl et an d d is co nne ct t he an te nn a.
T wo AA Batteries 1 T elevision 1 Remote Control Thank you for your purchase of a JVC Color Television. Before you begin setting up your new television, please check to make sure you have all of the following items.
7 Slide the cover on the back of the remote down towards the bottom of the remote control. Insert two batteries (included) carefully noting the “+” and “–” markings, placing the “–” end in the unit first. Slide the cover back into place.
8 Cable/RF connector AV Cables/Plugs Step T w o - Making Basic Connections Next you will need to connect your television to an antenna or cable system. The most basic antenna/cable connection is shown below. For more detailed connections, such as ones where a cable box is required, see pages 11 to 13.
9 Press the buttons to move to AUTO TUNER SETUP Press the buttons to begin AUTO TUNER SETUP T o choose CABLE (if you are connected to a cable system) or AIR (if you use an antenna) T o move to START T o start Auto T uner Setup The Auto T uner will now memorize all of the clear, active channels your television can receive.
T able of Contents Quick Setup Guide . . . . 7 CONNECTIONS Cable and VCR Connections . . . . . . . 11 Connecting to a DVD Player . . . . . . . 14 Connecting to an External Amplifier . . . 15 Connecting to a Camcorder . . . . . . . 15 Connecting to JVC A V Compu Link .
Connections 1) Connect the antenna or cable TV wire from the wall outlet, in to the RFInput of the two-way splitter. 2) Connect an RF cable from the one of the RFOutputs on the splitter, in to the RF Input on the back of the VCR. 3) Connect an RF cable from the other the RF Output on the splitter, in to the RF Input on the back of the TV.
Connections 12 1) Connect the antenna or cable TV wire from the wall outlet, in to the RFInput of the cable box. 2) Connect an RF cable from the RF Output of the cable box, in to the RF Input on the back of the VCR. 3) Connect an RF cable from the RF Output of the VCR, in to the RF Input on the back of the TV .
Connections 13 The connection diagrams are intended to show some basic general connections.Some cable companies may require special connections to properly use your television or 2-tuner PIP function.
Connections 14 1) Connect Green cable out from DVDplayer “Y”Component Output, in to T V“ Y ” Component Input. 2) Connect Blue cable out from DVDplayer “P B ”Component Output, in to T V“ P B ”Component Input. 3) Connect Red cable out from DVDPlayer “P R ”Component Output, in to T V“ P R ” Component Input.
Connections 15 1) Connect the yellow video cable out from the Camcorder ’ s Video Output, in to the TV’s Video Input jack. 2) Connect the white audio cable out from the Camcorder ’ s Left Audio Output, in to the TV’s Left Audio Input Jack.
Connections 16 T o Con nec t: Plug one end of the AVCompu Link cable into the AVCompu Link input on your VCR, D V D , or other Compu Link device. Plug the other end of the AV Compu Link cable into the AV C o m p u Link input at the rear of the television.
Remote Control 17 Before you can operate the remote control, you must first install the batteries (included). See “Changing the Batteries” at the bottom of this page for instructions. (For an illustration, please see page 7.) Press the P OWER button to turn the television on or off.
Remote Programming 18 Setting the CATV , VCR and DVD Codes Y ou can program your remote to operate your cable box, satellite receiver, VCR or DVD player by using the instructions and codes listed below.
Remote Programming 19 VCR codes The remote control is programmed with VCR codes for power on, power off, play, stop, fast-forward, rewind, pause, record, channel up, and channel down operation. 1) Find the VCR brand from the list of codes shown below.
Remote Programming 20 D VD codes The remote control is programmed with DVD codes for power on, power off, play, stop, fast-forward, rewind, previous chapter, next chapter, tray open/close, and still/pause operation. 1) Find the DVD player brand from the list of codes shown below .
T o bring up the onscreen men u , press the M ENU button on the remote control. The item that appears in yellow is the one currently selected. If you press the M ENU button again, the onscreen display will skip to the next menu screen.
Plug In Menu 22 The Plug In Menu comes up automatically when you first turn on the TV after plugging it in. The Plug In Menu helps you to get your TV ready to use by letting you set your preferences f.
Plug In Menu 23 A uto Clock Set Before you use any of your TV’s timer functions, you must first set the clock. Y ou may precisely set your clock using the XDS time signal broadcast by most Public Broadcasting stations.
Plug In Menu 24 Once you have the items in the Plug In Menu set to your personal preferences, move to the Finish option to save your settings. T o FINISH T o save settings and exit • Y ou can change the preferences you set in the Plug In Menu at any time using the regular JVC onscreen menu system.
Channel Summary Channel Summar y Channel Summary allows you to customize the line-up of channels received by your TV . Y ou can add or delete channels from the line-up or prevent any unauthorized viewers from watching any or all 181 channels.
26 V -Chip Y our TV is equipped with V-Chip technology which enables TV Parental Guidelines (for United States and Canada) and Movie (MPAA) Guideline controls. V-Chip technology allows you to pro- gram your TVto receive, or not to receive, programs based on content according to the guidelines.
27 V -Chip • V / F V is for VIOLENCE/F A N TA S Y VIOLENCE • S stands for SEXUAL C O N T E N T • L stands for strong LANGUAGE • D stands for suggestive DIALOG Viewing Guidelines US V -Chip Ratings U.S. PARENTAL RATING SYSTEMS P r o gra ms wi th th e f ol lo win g r at in gs ar e a pp r opr ia te fo r c hi ld r e n .
V -Chip 28 Line up the cursor in the column (TVPG, T V G, etc.) with the content row (V/FV, S, etc.) and press the o r to move the cursor to the correct location. Press or to turn the locking feature on or off. A n item is locked if the icon appears instead of a “—” .
V -Chip 29 Setting ratings with the V -Chip button Example 2: If you want to set your V-Chip settings to block all programming above a current setting such as TVPG-V (with violence): Press Z ERO when TV-PG - V is displayed All Programming above TV-PG- V (with Violence) will be blocked.
V -Chip ❒ NR - Not Rated. This is a film which has no rating. In many cases these films were imported from countries which do not use the MP A A ratings system. Other NRfilms may be from amateur producers who didn’t intend to have their film widely released.
31 V -Chip ❒ E - Exempt. Exempt programming includes: news, sports, documentaries and other information programming, talk shows, music videos, and variety programming. ❒ C – Programming Intended for Children. V iolence Guidelines: There will be no realistic scenes of violence.
32 V -Chip Unrated Programs Notes About Unrated Programs: Unrated programming refers to any programming which does not contain a rating signal. Programming on television stations which do not broadcast rating signals will be placed in the “Unrated Programming" category.
33 V -Chip Set Lock Code Channel Guard and V-Chip settings are protected by a four-digit Lock Code. Y our TV comes pre-set with a Lock Code of "0000". Y ou may change the code to any four-digit number you wish. To change the Lock Code, follow the steps below .
34 Picture Settings Tint Color Picture Bright Detail Tint allows you to adjust the levels of red and green in your TV picture. Press the M E N U b u t t o n To TINT T o increase the levels of green T .
Picture Settings 35 Noise Muting Set Video Status W ith Set Video Status, you can save your own set of picture quality adjustments as “Choice” and have access to them at the touch of a button.
36 Sound Settings You can increase or decrease the level of low-frequency sound in the T V ’ s audio with the Bass adjustment. Press the M E N U b u t t o n T o BASS T o increase the bass T o decrease the bass T o move to the next setting Use Treble to adjust the level of high-frequency sound in your T V ’ s audio.
37 General Items The On/Off timer lets you program your television to turn itself on or off. Y ou can use it as an alarm to wake up, to help you remember important programs, or as a decoy when you're not home.
General Items 38 If your TV is connected to a stereo system, you can turn off the T V speakers and listen to the audio through your stereo. Press the M E N U b u t t o n To TV SPEAKER T o turn the TV&.
General Items 39 Get the best quality video from your DVD player by using this setting and the DVD inputs at the rear of the television. Set either to YES for component input (for DVD) or to NO for composite video input (for a regular VCR).
Button Functions 40 The M E N U button allows you to access JVC’s onscreen menu system. Press M E N U to activate the onscreen menu system. • See individual topics (like “Sound Settings) for specific information on using menus. Press the E XIT button to leave a menu screen.
Button Functions 41 Video Status Sleep Timer Hyper Surround Muting The V IDEO S TA TUS button gives you a choice of three TV picture display settings, including a display of your own preferences. Standard - Resets the picture display to the factory settings.
Button Functions 42 Use the 100+ button to directly access channels above Channel 99. For example to move to channel 124, p r e s s 100+, 2 (two), 4 (four). 100+ Button Return+ Input Selects the signal input source for the television: TV (for Antenna or Cable) or Video-1, 2 or 3 for video devices like VCR’s, DVD players, or camcorders.
Button Functions 43 Light Your remote control includes illuminated buttons for key features like C H A N N E L + / - and V O L U M E + / - . Press the L I G H T button to turn the illumination on. D VD Buttons VCR Buttons TV/CATV Switc h VCR/DVD Switch Y ou can also use this remote control to operate the basic functions of your DVD player .
Button Functions - PIP 44 P I P displays two separate pictures on screen. Your television has 2-Tuner PIP, meaning you can view pictures from two different channels simultaneously. Aspecial set of PIPcontrol buttons are located on the upper part of the remote control.
Button Functions - PIP 45 Freeze Swap Channel +/- for PIP Source Use the F REEZE button to lock a single, still image onto the PIP window . • If PIP is off when F REEZE is pressed, a snapshot of the main screen is taken and placed in the PIPwindow.
T roubleshooting 46 D502/302/202 mini-IB 4/5/01 9:40 AM Page 46.
47 W arranty JVC COMPANYOF AMERICA warrants this product and all parts thereof, except as set forth below ONL YTO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original retail purchase for the period shown below (the “Warranty Period”) (PICTURE TUBE is covered for T wo (2) years.
48 W arranty 7) Accessories; 8) Batteries (except that Rechar g eable Batteries are covered for 90 days from date of pur- chase.) There are no express warranties except as listed above . THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED W ARRANTY OF MERCHANTABILTY , IS LIMITED T O THE DURATION OF THE EXPRESS W ARRANTY HEREIN.
49 Authorized Service Centers QUALITY SERVICE T OLL FREE: 1 (800) 537-5722 http://www.jvc.com HO W T O LOCATE Y OUR JVC SERVICE CENTER Dear Customer, In order to receive the most satisfaction from your purchase, please read the instruction booklet before operating the unit.
50 Search Codes Cable/Satellite Search Codes Function: 1) Slide the first 2-Way Mode Selector switch to CATV . 2) Press the TV P OWER and R ETURN + buttons. Hold for at least three seconds and release. 3) Press TV P OWER , see if the CATV or Satellite box responds.
Specifications 51 Specifications subject to change without notice . D502/302/202 mini-IB 4/5/01 9:40 AM Page 51.
JVC COMPANY OF AMERICA Division of JVC Americas Corp. 1700 Valley Road W ayne, New Jersey, 07470 JVC CANADA, INC. 21 Finchdene Square Scarborough, Ontario Canada, M1X 1A7 D502/302/202 mini-IB 4/5/01 9.
An important point after buying a device JVC AV 27D502 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC AV 27D502 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC AV 27D502 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC AV 27D502 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC AV 27D502 will certainly help you make a decision on the purchase.
If you already are a holder of JVC AV 27D502, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC AV 27D502.
However, one of the most important roles played by the user manual is to help in solving problems with JVC AV 27D502. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC AV 27D502 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
