Instruction/ maintenance manual of the product 1208TSH-II-IM JVC
Go to page of 68
LCT2518-001A-A 1208TSH-II-IM LCD T elevision Users Guide 1080p HDTV Important Note: In the spaces below , enter the model and serial number of your television (located at the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide.
2 W ARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS APP ARA TUS TO RAIN OR MOISTURE. CAUTION: TO INSURE PERSONAL SAFETY , OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS UNIT . 1. Operate only from the power source specified on the unit.
3 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
4 20) Cautions for installation — Do not tilt the TV towards the left or right, or towards the back. — Install the TV in a corner on the floor so as to keep cords out of the way . — The TV will generate a slight amount of heat during operation. Ensure that sufficient space is available around the TV to allow satisfactory cooling.
5 W arnings . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions . . . 3 Key Features . . . . . . . . . . . . . . . 6 Logos & Licenses . . . . . . . . . 7 Package Contents . . . . . . . . . 8 TV Basic Controls . . . . . . . . . . . 13 Remote Control .
6 Y our JVC TV is equipped with many features. Here is some key features highlighted in detail. Dock Dock Adapter 1 Simple playback of video and music on TV . Y ou can charge your iPod. Y ou can watch a program while listening to the iPod (source of program must be from TV’ s Internal T uner).
7 Logos & Licenses As an “ENERGY ST AR ® ” partner , JVC has determined that this product or product model meets the “ENERGY ST AR ® ” guidelines for energy efficiency . iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
8 Use two “AA” batteries (included). Place the " – " end in the unit first, making sure the " + " and " – " markings are correct.
9 Caring for the frame and stand Caring for the Screen Y our TV has a glossy frame and stand which have protection sheets attached to them. Peel them off before use, but only after the TV has been properly placed. T ake care with handling the glossy frame and stand because these surfaces are delicate.
10 Displaying fi xed images for extended periods of time can leave a subtle but temporary burn-in image on your screen. T o avoid this, mix your viewing pattern. Examples include, but are not limited to the following: A voiding T emporary Burn-in XYZ XYZ TV on TV off For example.
11 Install your TV T o prevent the TV from falling, thread the belt through the hole on the back of the stand and secure it to the TV rack. Belt and screw (not included) Hole Connect the stand The L T -32P300 TV stand is not attached to the TV when you purchased it.
12 Disconnecting the stand If you disconnect the stand, attach the bottom cover and the screw (supplied) into the hole. 1) Place the TV face down on a soft cloth on a table. 2) Remove the screws from the back of the TV . 3) Pull out the stand from the TV .
13 Notes: • Do not use unreasonable force to the Dock. • When not using the Dock, close the cover . • Do not touch the connector pins of the Dock or the iPod terminal pins. • Do not put different devices on the Dock. It may cause a connection failure.
14 TV Basic Controls Rear Panel 3 8 4 2 5 7 INPUT 1 INPUT 2 INPUT 3 75 Ω (VHF/UHF) * This is used when you are using HDMI analog audio 6 1 1 HDMI™ Connector 9 10 LCT2518-001A-A.
15 Before you connect your television to another device, please refer to the proper diagrams for your specific TV and remote. These will help assist you in understanding how to connect your television to another device, as well as use the remote to set up your television.
16 Best Good Video Connection Connection Cable TV Connection HDMI HDMI Cable INPUT 1, 2 or 3 DVI + Audio DVI – HDMI Cable, Audio Cable Input 1 + HDMI ANALOG AUDIO Component Video + Audio Component V.
17 Compatible Signal Notes Input • HDMI (Digital) SD: 480i, 480p HD : 720p, 1080i, 1080p/24Hz, 1080p/30Hz, 1080p/60Hz Audio L/R HDMI™ (v .1.3, HDMI™ CEC Support) Please usa a High Speed HDMI™ Cable. High Speed HDMI™ Cable are tested to carry an HD signal up to 1080p and higher .
18 The following pages gives you a brief description of each button’s function. This remote can also control up to four other devices. See pages 51 - 52. Remote Control TIMER Allows you to set the TV to turn on and set the TV to turn off automatically after a set amount of time and channel of your choice.
19 POWER TIMER MODE TV STB VCR DVD AUDIO INPUT 123 456 789 0 TUNE TV RETURN + iPod MUTING – CH + – VOL + RM-C1485 TV OK M E N U B A C K V1 V2 V3 V4 V5 TV DVD/DVR DBB TUNER USB TV RETURN + Has three functions. Return – Returns to the channel viewed just before the channel currently onscreen.
20 Remote Control DVR F A V O R I T E Allows you to save channels you like so you can view them easily . First you must register the channels you like. Notes: • Go to the channel you want to register and press the F A VORITE . A list will appear . Press the F A VORITE button again to register your channel.
21 * See page 52 for buttons that control your external devices. RM-C1485 TV DVR ST ATUS VIDEO GUIDE TV/VCR SUB T . SUB CH ML/MTS DISPLA Y SOUND F A V O R I T E A S P E C T PCON TV/VCR SUB CH Digital broadcast sometimes offers sub channels. By using the SUB CH button, you can select a sub channel easily .
22 When you turn on your TV for the first time, the Initial Setup menu appears automatically . These menus will help you setup your TV with basic information for Language , Time and T uner Setup .
23 “Thank you! Setup is now complete” 1 Change settings 5) Set TV attribute Start Scan Exit Set TV Attribute Tuner Mode Air 2 Select an item 4 Start scanning channels 3 Select “Start Scan” OK .
24 Customizing Y our TV Y ou can customize your TV by operating the menus on the TV screen. The TV screen displays the Menu Bar , Menu Item and available items are highlighted.
25 3) Change or adjust the setting Video Status Ti n t Color Contrast Bright Detail Backlight Color T emp Color Management Dynamic Gamma Smart Picture Digital VNR MPEG NR Natural Cinema Video Reset St.
26 Customizing your TV Picture V ideo Status Choose different display settings according to personal preferences. Y ou can use this feature with TV , V1, V2, V3, V4 and V5. Standard Resets the picture display to the factory settings. Dynamic Gives a vivid picture with better contrast when viewing in a brightly lit room.
27 Dynamic Gamma Allows you see more detail in very dark or bright areas so these areas don’t appear “muddied”. Normally , this feature should be left On for optimum picture quality . On / Off Color Management Allows you to compensate for dull colors to ensure dull colors are reproduced with natural hues.
28 Customizing your TV V ideo Input Label Allows you to label all the devices you have connected to the TV that use the VIDEO-1, 2, 3, 4 and 5 inputs. Display VCR DVD PVR D-VHS STB SAT AMP GAME CAM DI.
29 1 2 4 3 Move to the upper left Move up Move to the upper right Move to the left Reset Choose Slide Show Interval of 5, 10 or 20 seconds by pressing the ¥ buttons. Notes: • Gently pull out your USB device from the Photo Viewer terminal after fi nishing the Photo Viewer menu.
30 Customizing your TV Aspect Panorama - When watching a 4:3 aspect picture it is stretched to fit the dimensions of the 16:9 aspect screen. Cinema - This ratio “zooms in” on the center part of a 4:3 aspect picture, blowing it up proportionally to fill the 16:9 screen.
31 Closed Caption Allows you to select the mode of the closed caption. First you must set the MODE to either TV , STB or VCR on your remote. On / Smart / Off TV C.C. Setting Y ou can choose between caption or text in mode to decide how closed captioning will appear.
32 Note: • The Font , Font Size , Font Style , T ext Color , T ext Opacity , BG Color , BG Opacity and BG Color settings will not apply to closed caption of analog channels. In addition, some of these settings for closed caption for digital channels may or may not be available, depending on the closed captioning data being broadcast.
33 TV Continued... 123 456 789 0 TUNE TV RETURN + Edit Channel Allows you to skip channels when using the + CH – button. “ ✔ ” means don’t skip, “ ” means to skip. Y ou can still access those skipped channels manually using the number buttons on the remote.
34 Password MP AA Can. Eng. Can Fre. TVPG NR G PG PG13 R NC-17 X OK 1 Select 2 Lock / Unlock – When you lock or unlock channels – Y ou can lock or unlock ratings as shown below. Note: • If you lock a rating, any rating that is higher is automatically blocked.
35 TV Continued... Viewing Guidelines: At the beginning of a program, the program will display its rating and the content it contains (Except for unrated programming) .
36 Can. Eng. This setting is based on the Canada ratings system. E C C8+ G PG 14+ 18+ E – Exempt . Any type of programming that does not contain a rating. C – Intended for children . Suitable for all ages. C8+ – Intended for children over 8 years old .
37 TVPG This setting is based on the US ratings system. TV -Y TV -Y7 TV -G TV -PG TV -14 TV -MA ALL FV V SL D TV Y – Appropriate for all children . Intended for all children 2 - 6 years old. TV Y7 – Appropriate for older children . Intended for children 7 years or older .
38 Customizing your TV Notes: • This menu will replace the TV menu when you connect a PC to your TV terminal. See page 63. • There are some menus that PC mode can not use. (In Picture and Sound menu) • As for Aspect in the Display menu, only Regular and Full are available.
39 MTS Allows you to listen to a program in stereo, mono sound or another language (SAP). (Depending if available in the program) First you must set the MODE to TV on your remote. Notes: • When you are receiving a digital broadcast, if there are other languages, you can change the language by pressing the ML/MTS button.
40 Customizing your TV Power Indicator Allows you adjust the brightness of the blue power indicator light. High – Light is brightly lit Low – Light is dimly lit Off – Light is off Illumination Allows you adjust the brightness of the Diffuser Illumination.
41 Plug In Menu When you turn on your TV for the first time, the Initial Setup menu appears. If you skip it, or your setup has changed, you can set it up in this menu anytime. Time Zone D.S.T . Language Noise Mute Displays a blank gray screen over channels that are too weak to be received clearly .
42 Customizing your TV If you use a HDMI CEC compatible device, set this setting to “ On ”. HDMI CEC (Consumer Electronics Control) allows the TV to connect and control multiple HDMI CEC enabled devices with a single remote. CEC (Consumer Electronics Control) is an optional protocol used in HDMI.
43 Y ou can select the optical digital sound output as PCM or DOLBY DIGIT AL when your TV is connected to an amplifier that has a DOLBY DIGIT AL decoder . If you select DOLBY DIGIT AL, you can enjoy listening to 5.1ch sound when watching digital broadcasts.
44 iPod 4G photo/color 5G classic touch (1G) touch (1G) (FW:2.0+) touch 2G 20GB 40GB 20GB 30GB 40GB 60GB 30GB 60GB 80GB 80GB 120GB 160GB 8GB 16GB 32GB 8GB 16GB 32GB TV Control Mode Music Play ✔✔.
45 iPod nano iPod mini 1G 2G 3G 4G 1GB 2GB 4GB 2GB 4GB 8GB 4GB 8GB 8GB 16GB 4GB 6GB ✔✔✔✔✔ ✔✔ ✔ (3) ✔ (3) ✔ (3) ✔ (3) ✔ (3) ✔ (1) ✔ (1) ✔ (1) ✔ (1) ✔ (1) ✔✔ ✔✔ ✔✔✔✔✔ ✔✔✔✔✔ Advanced LCT2518-001A-A.
46 1) Insert your iPod into the Dock on the front of the TV . Notes: • It is recommended that music, pictures and movies on the iPod be saved on your PC or other hard drive for backup. • Please be sure to connect/disconnect the iPod properly from the Dock and use the iPod without any accessory/case.
47 TV Control Mode Y ou can operate the iPod by using the TV’s remote control and onscreen menus. Music Play Video Play Music Shuffle Play Settings Now Playing JVC iPod classic(2) 1 Music Play Video.
48 Music Play / Video Play NOWHERE WHY ARE WE HERE SOME RANDOM BAND ROCK JVC iPod classic(2) 1 1 / 334 00:00:43 / 00:06:21 Music Play Skip to the next/last song iTV Y ou can view the last program you were watching while listening to your iPod (iTV Mode).
49 Music Shuffle Play This function selects songs randomly . Note: • Basic operations are the same as the operations when playing in Music Play mode. Y ou can adjust the settings below by pressing the and OK buttons. Shuffle / Repeat / Audiobook Y ou can operate the iPod using the TV’s remote control and the onscreen of the iPod.
50 While your iPod is connected to the Dock, you have the ability to recharge your iPod. The time it takes depends on how low your batteries are. Recharge iPod Error messages “iPod not found” This appears when you press the iPod button without inserting an iPod.
51 Y ou can program your remote control to operate your external devices, using the instructions and codes on pages 51 - 57. How to set the codes 1) Manually turn on the device. 2) Change the remote control mode according to the device by pressing the MODE button.
52 iPod MUTING OK M E N U F A T B A C K Remote Control Functions MODE TV STB VCR DVD AUDIO POWER Operates menus Changes the remote control mode T urns the selected device off Select OK Display menu Back to previous menu Playback / Record, etc. iTV Rewind Play Forward Record Stop Pause Displays Subtitles SUB T .
53 Programming Codes ABC Americast Bell South Digeo Director General Instrument GoldStar Hamlin Jerrold Memorex Motorola Pace Panasonic Paragon Philips Pioneer Pulsar Quasar Regal Runco Samsung Scient.
54 Programming Codes ABS Admiral Adventura Aiko Aiwa Akai Alienware America Action American High Asha Audiovox Beaumark Bell & Howell Broksonic Calix Canon Capehart Carver CCE Citizen Colt Craig C.
55 VCR VCR VCR mode Philips Pilot Pioneer Polk Audio Portland Presidian Profitronic Proscan Protec Pulsar Quarter Quartz Quasar RadioShack Radix Randex RCA Realistic ReplayTV Ricavision Runco Samsung .
56 DVD DVD DVD mode Accurian Advent Aiwa Akai Alco Allegro Apex Digital Arrgo Aspire Digital Audiovox Blaupunkt Blue Parade Broksonic Cinea Cine Vision Citizen Coby Craig Curtis Mathes CyberHome Daewo.
57 Amstrad Bose Curtis Mathes Durabrand GE Harman/Kardon JVC Left Coast Lenoxx Linn Marantz NEC Optimus Philips Pioneer Polk Audio RCA Shure Sony Soundesign Victor Wards Y amaha ADC Aiwa Akai Alco Amp.
58 Notes: • The following connection diagrams are examples on connecting some of the most common devices to your TV . Please refer to your device’s instruction manual on other connection methods or for devices not shown here in this instruction book.
59 Notes: • Green, blue and red are the most common colors for Component Cables. Some models may vary in color . • T o watch your VCR / DVD player , make sure your TV is displaying INPUT 4 or INPUT 5 by pressing the V4 or V5 button on your remote control.
60 Connect an Amplifier using the DIGIT AL AUDIO OPTICAL OUT Notes: • Refer to your amplifier ’s manual for more information. • This terminal can only output digital audio (PCM or DOLBY DIGIT AL). • In order to use the optical output connection, select PCM or DOLBY DIGIT AL.
61 Connect a Digital Source Device Notes: • T o watch your digital source device, make sure your TV is displaying INPUT 1 by pressing the V1 button on your remote control. • This TV can accept 480i, 480p, 720p, 1080i and 1080p signals via HDMI. • The INPUT 1 HDMI ANALOG AUDIO input can only be used with INPUT 1.
62 Connect a Blu-ray or HDMI Device INPUT 1 INPUT 2 INPUT 3 75 Ω (VHF/UHF) INPUT 3 INPUT 1 75 Ω (VHF/UHF) TV Rear Panel (INPUT 2) Blu-ray / HDMI Compatible Device Notes: • T o watch your Blu-ray or HDMI device, make sure your TV is displaying INPUT 1, INPUT 2 or INPUT 3 by pressing the V1 , V2 or V3 button on your remote control.
63 TV Rear Panel PC Connect a Computer Notes: • Make sure your TV is displaying INPUT 1, INPUT 2, INPUT 3 or INPUT 5 by pressing the V1 , V2 , V3 or V5 button on your remote control. • T o use PC Smart Input function, see page 43. • When you connect a PC using HDMI-DVI cable, connect an audio cable to INPUT 1 HDMI ANALOG AUDIO on the TV .
64 Refer to the table below to check the condition. If you think that there is a problem, contact the JVC Service Center where you purchased the television. T roubleshooting There is no power • See if the power cord became unplugged. • Check for a blown fuse or circuit breaker or a power outage.
65 The following are not malfunctions. • The television may make a creaking sound if the temperature of the room or the temperature of the inside of the television changes. If there is no problem with the screen or sound, then there is no need to worry .
66 LCD Flat T elevision Ty p e Reception Format Power Source Power Consumption Model NTSC, BTSC System (Multi-Channel Sound) A TSC T errestrial, Digital Cable AC 120V , 60 Hz Screen Size Speakers Audi.
67 LCT2518-001A-A.indd 67 LCT2518-001A-A.indd 67 1/14/09 8:55:35 AM 1/14/09 8:55:35 AM.
JVC COMP ANY OF AMERICA Division of JVC Americas Corp. 1700 V alley Road W ayne, New Jersey , 07470 JVC CANADA, INC. 21 Finchdene Square Scarborough, Ontario Canada, M1X 1A7 Digital T elevision T rans.
An important point after buying a device JVC 1208TSH-II-IM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC 1208TSH-II-IM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC 1208TSH-II-IM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC 1208TSH-II-IM you will learn all the available features of the product, as well as information on its operation. The information that you get JVC 1208TSH-II-IM will certainly help you make a decision on the purchase.
If you already are a holder of JVC 1208TSH-II-IM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC 1208TSH-II-IM.
However, one of the most important roles played by the user manual is to help in solving problems with JVC 1208TSH-II-IM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC 1208TSH-II-IM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
