Instruction/ maintenance manual of the product Impressa J9 Jura
Go to page of 48
IMPRES SA J9.2 One T ouch Instructions for Use The Instructions for Use has been awarded the seal of approv al by the independent German T echnical Inspection Agency , TÜV SÜD, due to its easy-to-underst and style, its thoroughness and cov erage of safety aspects .
2 T able of contents Control elements 4 Import ant information 6 Proper use ...................................................................................................................................................... 6 For y our safety .....
3 T able of contents W arnings J CAUTION J W ARNING Alwa ys take note of an y information mark ed with the words CAUTION or W ARNING and a w arning sign. The signal word W ARNING draws y our attention to potential serious injury, and the signal w ord CAUTION to potential minor injury .
4 Control elements Control elements 1 Bean container cov er 2 W ater tank cov er 3 Bean container with aroma preser vation.
5 Control elements Surface of the machine 1 Q On/Off button 2 g Rotary Switc h 3 c Maintenance button Fr o n t 4 Display 5 Preparation buttons u Ristretto button i Espresso button .
6 Important information Impor tant information The machine is designed and intended for priv ate domestic use . It should only be used for coffee prepar ation and to heat milk and wat er . Use for any other purpose will be deemed improper . JURA Elektroapparat e AG cannot acc ept any responsibility for the conse- quences of improper use .
7 Important information U T o completely and safely disconnect the machine from the power supply , first switch off the IMPRESSA using the On/Off button and then at the pow er switch. Only then should you remov e the mains plug from the power sock et.
8 Important information U Only fill the water tank with fresh, cold w ater . U Switc h the machine off at the pow er switch if y ou are going to be absent for a longer period of time .
9 1 Preparing and using for the first time 1 Preparing and using for the first time Visit us on the Internet. @ Y ou can download short operating instruc tions for your machine from the JURA website (www .jura.com). Y ou will also find interesting and up-to -date information on y our IMPRESSA and on every aspect of coffee.
10 1 Preparing and using for the first time T Fill the bean container with coffee beans, then close the aroma preservation cover and the bean c ontainer cover . If the machine is oper ated with a defective mains cable , there is a danger of potentially fatal electric shock.
11 1 Preparing and using for the first time Y our IMPRESSA no longer has to be descaled if y ou are using the CLARIS Blue filter cartridge. E Perform the ‘inserting the filter’ operation without any int er - ruptions. This will ensure that your IMPRES SA alw ays produces its best.
12 1 Preparing and using for the first time E The w ater may be slightly disc oloured. This is not harmful to health and does not affect the taste. Rinsing of the filter stops automatically after approximat ely 500 ml. The machine heats up. COFFEE READY appears on the display .
13 1 Preparing and using for the first time k T Press the Rotar y Switc h to enter the progr amme item. 16°dH n n n k k g T T urn the Rotar y Switc h until 25°dH n n n n n is display ed. k T Press the Rotar y Switc h to confirm the setting. CONFIRMED appears briefly on the display .
14 2 Preparation 2 Preparation E Y ou can stop preparation of a spec iality coffee, milk spec iality or hot wat er at any time . Just press any butt on.
15 2 Preparation Y our IMPRESSA can prepare a latt e macc hiato or cappuccino at the touch of a button. There is no need to mo ve the glass or c up. Example : Proceed as follo ws to prep are one latte macc hiato. T Remov e the protective co ver from the cappuccino frother .
16 2 Preparation Example : Proceed as follo ws to prepare milk foam. T Remov e the protective co ver from the cappuccino frother . T Attach the milk pipe to the cappuccino frother . Use the long pipe for a milk carton and the shor t pipe for a milk container .
17 2 Preparation Y ou can choose to use a second co ffee variety , for ex ample decaf- feinated coff ee, with the filt er funnel for ground coffee . E Nev er add more than two lev el measuring spoons of ground coffee . E Use ground coff ee which is not ground too finely .
18 2 Preparation It is easy to make permanent settings f or the amount of wat er for all speciality coffees and hot wat er according to the cup siz e . Adjust the amount once as shown in the f ollowing example . Every time you prepare a drink in the future, this amount of w ater will be dispensed.
19 2 Preparation T o obtain a per fect water flow , use the hot-w ater nozzle. Y o u can find the hot -w ater nozzle under the c ov er of the stor age compartment. The following temper atures can be selec ted for preparing hot wa ter: LOW , NORMAL , X HIGH .
20 3 Daily operation 3 Daily operation When the IMPRESSA is swit ched on, it automatically prompts you to perform the rinse oper ation. Start the rinse operation by pressing the Maintenance button c .
21 3 Daily operation When you switc h your IMPRES SA off , the spouts used to prepare a speciality coffee or milk are rinsed. T Place one receptacle under the coffee spout and another under the cappuccino frother . Q T Press the On/Off button. MACHINE RINSING , the spouts used to prepare a spe - ciality coffee or milk are rinsed.
22 4 Permanent settings in programming mode 4 Permanent settings in programming mode Y ou can make permanent settings in progr amming mode. Y ou can navigate through the progr amme items and permanently sa ve the required settings simply by turning and pressing the R otar y Switc h.
23 4 Permanent settings in programming mode Programme item Sub-item Explanation SYMBOL BRIGHTNESS BRIGHTNESS T Adjust the brightness of the symbols. LANGUAGE T Select your language. EXIT T Exit programming mode . In the programme it em PRODUCTS you can mak e individual set - tings for all speciality coffees and hot w ater .
24 4 Permanent settings in programming mode g T T urn the Rotar y Switch until PRODUCTS is displa yed. k T Press the Rotar y Switc h to enter the progr amme item. SELECT PRODUCT E Next select the button of the produc t for which y ou would lik e to mak e settings.
25 4 Permanent settings in programming mode k T Press the Rotar y Switc h to exit the progr amme item. COFFEE READY In the programme it em ECONOMY MODE you can permanently set an energy-saving mode (Energy Sav e Mode , E.
26 4 Permanent settings in programming mode By instructing your IMPRESSA t o automatically switch itself off , you can cut down y our energy consumption. If this function is activated, your IMPRES SA switc hes off automatically after the preset time following the last action on the machine .
27 4 Permanent settings in programming mode Example : Proceed as follows to mak e the machine prompt y ou to perform the cappuccino rinse immediately after preparing a speci- ality coffee with milk. Precondition: COFFEE READY is display ed. k T Press and hold the Rotar y Switc h until MAINTENANCE appears.
28 4 Permanent settings in programming mode Example : Proc eed as follow s to reset the values f or ‘Espresso’ to the factory settings. Precondition: COFFEE READY is display ed. k T Press and hold the Rotar y Switc h until MAINTENANCE appears. g T T urn the Rotar y Switch until RESET is display ed.
29 4 Permanent settings in programming mode E The maintenanc e status can also be displayed in addition to the number of performed maintenance programmes. The bar shows the current maint enance status. When the bar is com- pletely filled, your IMP RESSA will request the respective main- tenance progr amme .
30 4 Permanent settings in programming mode g T T urn the Rotar y Switch to set the required brightness of the symbols. k T Press the Rotar y Switc h to confirm the setting. CONFIRMED appears briefly on the display . SYMBOL BRIGHTNESS g T T urn the Rotar y Switch until EXIT is displa yed.
31 5 Maintenance 5 Maintenance Y our IMPRESSA has the follo wing integr ated maintenance pro- grammes : U Cleaning the cappuccino frother ( CLEAN CAPPUCCINO ) U Rinsing the cappuccino frother ( RINSE .
32 5 Maintenance After each milk preparation, the IMPRES SA prompts you to run a cappuccino rinse . Precondition: COFFEE READY / RINSE CAPPUCCINO is display ed and the Maintenance button c lights up. T Place a receptacle under the cappuccino frother .
33 5 Maintenance T Place another receptacle under the cappuccino frother . c T Press the Maintenance button. CAPPUCCINO CLEANS , the cappuccino frother and the pipe are cleaned. WATER FOR CAPPUCCINO T Rinse the receptacle thoroughly , fill it with 250 ml of fresh wat er and immerse the milk pipe in the water .
34 5 Maintenance Precondition: COFFEE READY / CHANGE FILTER is dis - play ed and the Maintenance button c lights up. c T Press the Maintenance button. DURATION 2MIN. / START YES E If y ou do not want to start changing the filter just yet, turn the Rotary Switch until START NO is display ed.
35 5 Maintenance After 200 preparations or 80 switch-on rinses, the IMPRES SA will prompt you to c lean it. If the wrong cleaning agent is used, the machine could be damaged and/or trac es could be left behind in the water . T Use only original JURA maintenance products.
36 5 Maintenance T Inser t a JURA cleaning tablet into the filler funnel. T Close the co ver of the filler funnel. ADD TABLET / PRESS RINSE , the Maintenance but - ton c light s up. c T Press the Maintenance button. CLEANS , wat er flows repeatedly out of the c offee spout and the cappuccino frother .
37 5 Maintenance Precondition: COFFEE READY / DECALCIFY MACHINE is display ed and the Maintenance button c lights up. c T Press the Maintenance button. DURATION 45MIN. / START YES E If y ou do not want to start descaling just yet, turn the Rotary Switc h until START NO is display ed.
38 5 Maintenance T Fill the wat er tank with fresh, cold water and reinsert the tank. PRESS RINSE , the Maintenance button c lights up. T Refit the cappuccino frother . T Place a receptacle under the cappuccino frother and another under the coffee spout.
39 5 Maintenance Limescale deposits may form in the wa ter tank. T o ensure correct function of the machine, descale the w ater tank from time to time .
40 6 Display messages 6 Display messages Message Cause/Result Action FILL WATER TANK The wat er tank is empt y . Y ou cannot prepare any products . T Fill the wat er tank (see Chapter 1 ‘Preparing and using for the first time – Filling the wat er tank’).
41 6 Display messages Message Cause/Result Action COFFEE READY / DECALCIFY MACHINE or COFFEE READY / DECALCIFY NOW The IMPRESSA is prompting you to descale it. T Perform descaling (see Chapter 5 ‘Maintenanc e – Descaling the machine ’). COFFEE READY / CHANGE FILTER or COFFEE READY / CHANGE NOW The filter cartridge no longer works.
42 7 T roubleshooting 7 T roubleshooting Problem Cause/Result Action When preparing a latte macchiato, the typical three lay ers do not form. – T T urn the setting wheel of the cappuc - cino to the far right and the Milk F oam position ü .
43 7 T roubleshooting Problem Cause/Result Action Little or no wat er or steam comes out of the cappuccino frother . The pump is very quiet. The connector of the cappuccino frother may be blocked b y milk residues or limescale fragments loosened during descaling.
44 8 T ranspor t and environmentally friendly disposal 8 T ranspor t and environmentally friendly disposal In order to protect the IMPRESSA from fros t during transport, the system must be emptied. Precondition: COFFEE READY is displa yed. T Carefully pull the cappuccino frother down and off .
45 9 T echnical data 9 T echnical dat a V o ltage 220–240 V ~, 50 Hz Pow er 1450 W Safety test S Energy consumption SAVE YES Approx. 5 Wh Energy consumption SAVE NO Approx. 12 Wh Pump pressure Static, max. 15 bar Holding capacity of water tank 2.1 l Holding capacity of bean container 250 g Holding capacity of coffee grounds container Max.
46 10 Index 10 Index A Addresses 48 Automatic switch-off 26 B Bean container Bean container with aroma preser vation cov er 4 Cleaning 38 Filling 9 Bus bar T echnical data 45 Button Cappuccino button .
47 10 Index I Instant coffee Ground coffee 16 Internet 9 J JURA Contac t details 48 Internet 9 L Language 30 Latte macchiato 15 M Machine Cleaning 35 Descaling 36 Rinsing 31 Setting up 9 Switc hing of.
48 11 JURA contact details / Legal information 11 JURA contact details / Legal information JURA Elektroapparat e AG Kaffee weltstrasse 10 CH-4626 Niederbuchsiten T el. +41 (0)62 38 98 233 @ Y ou will find additional contac t details for your country at www .
An important point after buying a device Jura Impressa J9 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jura Impressa J9 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jura Impressa J9 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jura Impressa J9 you will learn all the available features of the product, as well as information on its operation. The information that you get Jura Impressa J9 will certainly help you make a decision on the purchase.
If you already are a holder of Jura Impressa J9, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jura Impressa J9.
However, one of the most important roles played by the user manual is to help in solving problems with Jura Impressa J9. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jura Impressa J9 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
