Instruction/ maintenance manual of the product Impressa F50 Classic Jura
Go to page of 33
I M IM PR E SSA PRE SSA F5 0 / F 50 5 F50 / F505 In st ru c t io n s for u se Instructions for use.
2 Legend: 䡲 DISPLAY: serves as information. 䡲 DISPLAY: please follow the instructions shown. = Note / Tip = Important.
3 Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig.17 Fig. 5 Fig. 16 Temp. max. Temp. min. Fig.
10 9 13 14 17 18 11 3 1 2 12 20 4 7 8 5 6 15/16 19 Rotary Switch 13 21 22 4 Control elements 1. Rotary Switch 2. Illuminated ring 3. Maintenance button 4. Preparation button, 1 espresso 5. Preparation button, 2 espressi 6. Preparation button, 1 coffee 7.
5 E T able of contents 1. Safety instructions ............................................... page 6 1.1 Proper use .................................................. page 6 1.2 Warnings .................................................... page 6 1.3 Precautions .
6 Before y ou get star ted Congratulations on purchasing this IMPRESSA. To ensure that your IMPRESSA works smoothly, please read these instructions for use carefully and keep them as a future reference.
7 䡲 Be careful to ensure that the mains cable is not trapped and does not rub against sharp edges. 䡲 Always remove the mains plug during long periods of absence (holidays etc.). 䡲 Always remove the mains plug before cleaning. 䡲 When removing the mains plug, never tug the supply cable or the IMPRESSA itself.
8 Only use the switch to adjust the consistency of grind when the grinder is running. 䡲 Open the bean container cover (12) and remove the aroma preser- vation cover (13). 䡲 To adjust the consistency of grind, turn the switch to the desired position during the grinding operation (Fig.
9 The IMPRESSA is set to 16° dH by default. You can change this setting. Proceed as follows: 䡲 READY 䡲 Press and hold the Rotary Switch (1) until RINSE appears on the dis- play.
10 You can interrupt rinsing of the filter at any time by closing the steam / hot water draw-off tap (14). To continue with filter rins- ing, open the steam / hot water draw-off tap (14) again. 䡲 CLOSE TAP 䡲 Close the steam / hot water draw-off tap (14), your IMPRESSA will now heat up to coffee temperature.
11 7 . A djusting the amount of wa ter for co ffee The figure in ML is approximate and may vary from the actual amount. The machine automatically doubles the amount of water pro- grammed for the 2 espressi / 2 coffees preparation but- tons. You can also change the amount of water during operation.
12 䡲 䡵䡵䡵䡺䡺䡺䡺䡺䡺䡺 䡲 Your speciality coffee is prepared. 䡲 1 COFFEE 䡲 READY 9. Preparing 2 cups of coff ee The strength cannot be selected when preparing 2 cups of cof- fee. You automatically prepare 2 mild cups. You can stop preparation prematurely by pressing any prepara- tion button.
13 䡲 Select the 1 coffee preparation button (6) or 2 coffees prepara- tion button (7). 䡲 1 COFFEE 䡲 䡵䡵䡵䡺䡺䡺䡺䡺䡺䡺 䡲 The illuminated ring (2) is active. 䡲 By turning the Rotary Switch (1), you can individually select the amount of water for coffee: 䡲 For example 110 ML.
14 䡲 READY 䡲 Press the steam preselection button (8). 䡲 HEATING 䡲 READY 䡲 Open the steam / hot water draw-off tap (14) (Fig. 13) to draw off steam.
15 䡲 Insert the other end of the milk pipe into a milk carton or connect it to a milk container (Fig. 7). 䡲 Place a cup under the Professional Cappuccino Frother (Fig. 7). The high-quality stainless steel container is a practical addition for all lovers of milk specialities.
16 1 3. 3 Rinsing the Professional Cappuccino F rother To ensure that the Professional Cappuccino Frother (15) works perfectly, you should rinse it with water after every milk prepa- ration. Your IMPRESSA will not prompt you to rinse the Professional Cappuccino Frother.
17 䡲 Open the steam / hot water draw-off tap (Fig. 13) to draw off steam. 䡲 STEAM 䡲 䡵䡵䡵䡺䡺䡺䡺䡺䡺䡺 䡲 Ignoring the CLOSE TAP display message, draw off steam until the receptacle containing JURA Cappuccino Cleaner is empty. The Professional Cappuccino Frother and the milk pipe are cleaned.
18 Rotary Switch Permanent settings in programming mode always follow the same model. To enter programming mode, press the Rotary Switch (1) until RINSE appears on the display. By turning the Rotary Switch (1) you can change the set values and select dif- ferent programme items.
19 15. 1 Buttons programme item With the BUTTONS programme item you can enter individual settings for all speciality coffees, milk and hot water. Permanent settings in programming mode always follow the same model.
20 䡲 Turn the Rotary Switch (1) to adjust the temperature. 䡲 HIGH 䡲 Press the Rotary Switch to confirm your selection. 䡲 OK 䡲 TEMP. 䡲 Turn the Rotary Switch (1) until EXIT appears on the display. 䡲 Press the Rotary Switch (1). 䡲 SELECT BUTTON 䡲 Turn the Rotary Switch (1) again until EXIT appears on the display.
21 䡲 Press and hold the Rotary Switch (1) until RINSE appears on the dis- play. 䡲 The illuminated ring (2) is active. 䡲 Press the Rotary Switch (1) until you reach the OFF AFTER pro- gramme item. 䡲 OFF AFTER 䡲 Press the Rotary Switch (1) to enter the OFF AFTER programme item.
22 䡲 RESET ALL All customer settings are reset to the factory settings. The IMPRESSA then switches off. For example you want to reset the values for one product to the fac- tory setting: 䡲 READY 䡲 Press and hold the Rotary Switch (1) until RINSE appears on the dis- play.
23 䡲 Press the 1 COFFEE preparation button. 䡲 XXXX (=total number for ‘1 COFFEE’) 䡲 Press the Rotary Switch (1) to exit the programme item. 䡲 BUTTONS Turn the Rotary Switch (1) for more information about the filter, descaling or the machine version.
24 15. 10 Language programme item You can choose from the following languages: German Dutch English Spanish French Portuguese Italian Russian 䡲 READY 䡲 Press and hold the Rotary Switch (1) until RINSE appears on the dis- play. 䡲 The illuminated ring (2) is active.
25 16. 3 Drip tray missing 䡲 TRAY MISSING 䡲 When this display lights up, the drip tray (20) has not been cor - rectly inserted or has not been inserted at all. 䡲 Insert the drip tray (20). 䡲 READY 16.4 Filling with coffee beans 䡲 FILL BEANS 䡲 Top up the beans as described in chapter 2.
26 䡲 To ensure that the Professional Cappuccino Frother always works properly, you should clean it daily when you have been preparing milk. 䡲 The water tank should be rinsed daily and filled with fresh water. If you can see scale starting to form in the water tank, you can use a conventional descaling agent to remove it.
27 䡲 Place a 1 litre receptacle (Fig. 12) under the height-adjustable coffee spout (17). 䡲 PRESS RINSE 䡲 Press the Maintenance button (3). 䡲 CLEANING 䡲 ADD TABLET 䡲 Add the tablet to the powder shaft (Fig. 15). Close the powder shaft. 䡲 PRESS RINSE 䡲 Press the Maintenance button (3).
28 䡲 TRAY MISSING 䡲 Carefully reinsert the drip tray. 䡲 AGENT IN TANK Remove and empty the water tank. Completely dissolve the contents of one blister (3 tablets) in 0.5 litres of water and add the mixture to the water tank. Reinsert the water tank.
29 20. Tips for a perfec t coffee Height-adjustable coffee spout (17) You can adjust the coffee spout to the size of your cups (Fig. 3). Consistency of grind For details, please refer to chapter 2.5 ‘Adjusting the grinder’ Prewarming cups You can prewarm the cups with hot water or steam.
30 21. Messages Cause Remedy FILL WATER TANK The water tank is empty Fill the water tank The float is defective Rinse or descale the water tank FILL BEANS The bean container is empty Fill with beans Even though the beans have been topped up, the Prepare a cup of coffee.
31 E 22. Problems Problem Cause Remedy Very loud grinder noise Foreign object in grinder Coffee preparation with preground powder still possible Have IMPRESSA checked by JURA customer support Too litt.
32 23. Legal information These instructions for use contain the information required to cor- rectly use, operate and maintain the machine. The information in these instructions for use must be read and fol- lowed to ensure safe usage, operation and maintenance.
Art. 69008 – 201002 JURA Elektroapparat e AG – K affeew eltstrasse 10 – CH-4626 Niederbuchsiten Phone +41 62 389 82 33 – F ax +4 1 62 389 83 94 – www .
An important point after buying a device Jura Impressa F50 Classic (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jura Impressa F50 Classic yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jura Impressa F50 Classic - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jura Impressa F50 Classic you will learn all the available features of the product, as well as information on its operation. The information that you get Jura Impressa F50 Classic will certainly help you make a decision on the purchase.
If you already are a holder of Jura Impressa F50 Classic, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jura Impressa F50 Classic.
However, one of the most important roles played by the user manual is to help in solving problems with Jura Impressa F50 Classic. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jura Impressa F50 Classic along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
