Instruction/ maintenance manual of the product TM9V080B12MP11 Johnson Controls
Go to page of 2
NOTES: 1. If the furnace is equ ipped with NOx screens and is to be used with LP (propane) gas, the screens must be removed prior to start-up. 2. Drip leg in the gas line must be installed. 3. The furnace controls requi re correct polarity on the power supply and a proper ground.
Furnace is multi-position and may be installed in any of the configurations shown. Ensure that all PVC venting has at least 1/4” per foot slope towards the furnace.
An important point after buying a device Johnson Controls TM9V080B12MP11 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Johnson Controls TM9V080B12MP11 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Johnson Controls TM9V080B12MP11 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Johnson Controls TM9V080B12MP11 you will learn all the available features of the product, as well as information on its operation. The information that you get Johnson Controls TM9V080B12MP11 will certainly help you make a decision on the purchase.
If you already are a holder of Johnson Controls TM9V080B12MP11, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Johnson Controls TM9V080B12MP11.
However, one of the most important roles played by the user manual is to help in solving problems with Johnson Controls TM9V080B12MP11. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Johnson Controls TM9V080B12MP11 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
