Instruction/ maintenance manual of the product 20 Johnson Controls
Go to page of 10
Johnson Controls Unitary Products 898147-UUM-B-0713 USER’S INFORMA TION MANU AL SINGLE AND MUL TI-ZONE DUCTLESS SYSTEM AIR CONDITIONER OR HEA T PUMP MODELS: 16 & 22 SEER T ABLE OF CONTENTS GENERAL . . . . . . . . . . . . . . . . . . . . . . . . .
898147-UUM-B-0713 2 Johnson Controls Unitary Products SAFETY DUCTLESS SY STEM DEFFINITIONS SINGLE SPLIT SY STEM A single split system consists of a single outdoor unit and a single indoor unit. The single split system is controlled using a remote control (included with indoor unit).
898147-UUM-B-0713 Johnson Controls Unitary Products 3 DUCTLESS SY STE M OPERA TION MUTI-SPLITS APPLICA TION ONL Y In a multi-split applicat ion, the operating mode is determined by the zone that initiates the first demand for heating or cooling.
898147-UUM-B-0713 4 Johnson Controls Unitary Products MUL TI-SPLITS FIGURE 2: Multi-S plit Units 18 KBTU OUTDOOR UNIT (ONE T O TWO ZONES) 24 KBTU OUTDOOR UNIT (TWO T O THREE ZONES) 30 KBTU OUTDOOR UNIT (TWO T O FOUR ZONES) 42 KBTU OUTDOOR UNIT (TWO T O FIVE ZONES) AIR IN AIR OUT 1 2 3 8 4 5 7 6 1.
898147-UUM-B-0713 Johnson Controls Unitary Products 5 REMO TE CONTR OL OPERA TION The wireless remote control gives the home- owner the ability to operate their ductless sys- tem at the touch of a button. The indoor unit and remote control send information back and forth continuously .
898147-UUM-B-0713 6 Johnson Controls Unitary Products TIMER ON B UTTON Use the TIMER ON button to in itiate or cancel a single timed ON event. Use this feature to bring the system on when you return home or when you wake up in the morning. Press the TIMER ON button once.
898147-UUM-B-0713 Johnson Controls Unitary Products 7 MAINTENANCE OUTDOOR UNIT 1. Ensure power is off before cleaning. 2. It may be necessary to wash the outdoor coil more frequently if it is exposed to substances which are corrosive or which block airflow across the coil (e.
898147-UUM-B-0713 8 Johnson Controls Unitary Products FIGURE 4: Indoor Unit Front Panel Indicators 72 HEA T INDICA TOR COOL INDICA TOR TEMPERA TURE* RUN DEHUMIDIFY MODE INFRARED SIGNAL RECEIVER * The temperature readout (either temperature setpoint or indoor ambient) will be replaced by an error code if there is a malfunction.
898147-UUM-B-0713 Johnson Controls Unitary Products 9 Limited Warranty W ARRANTY TERM S: Johnson Controls Unitary Products (hereinafter “ Company ” ) warrants this product to be free from defects .
Subject to change without notice. Published in U.S.A. 898147-UUM-B-0713 Copyright © 2013 by Johnson Controls, Inc. All rights reserved. Supersedes: 898147-UUM-A-0112 Y ork International Corp. 5005 Y ork Drive Norman, OK 73069 EXCLUSIONS: This warranty does not co ver any: 1.
An important point after buying a device Johnson Controls 20 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Johnson Controls 20 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Johnson Controls 20 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Johnson Controls 20 you will learn all the available features of the product, as well as information on its operation. The information that you get Johnson Controls 20 will certainly help you make a decision on the purchase.
If you already are a holder of Johnson Controls 20, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Johnson Controls 20.
However, one of the most important roles played by the user manual is to help in solving problems with Johnson Controls 20. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Johnson Controls 20 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
