Instruction/ maintenance manual of the product JOHN LEWIS JLWM 1604 John Lewis
Go to page of 44
JLWM 1604 1600 spin washing machine Instruction manual.
Safety information It is mo st important that thi s inst ruction book should be retained with the appliance for future refe rence. Should the appliance be sold or transferred to another owner, or shou.
• Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub and the inner drum. • Do not use your washing machine to wash articles with whalebones, material without hems or torn material.
• The users should always check that they have not left their gas lighters (disposable or otherwise) in their clothing. • Never tumble dry items that have had contact with che micals such as dr y cleaning fluid. T hese are of a volatile nature and could cause an explosi on.
Contents Operating instructions Safety information 2 General safety 2 Installation 3 Use 3 Child safety 4 Product description 7 Detergent dispenser drawer 8 Control panel 8 Programme Dial (2) 9 Spin (.
How to open the door during the cycle of a programme 15 End of programme 16 Helpful hints and tips 16 Washing programmes 18 Technical data 23 Consumpti on values 23 Care and cleaning 24 Descaling 24 E.
Product description 1 Detergent dispenser drawer 2 Control panel 3 Door opening handle 4 Rating plate 5 Drain pump 6 Adjustable feet 1 2 3 5 4 6 7.
Detergent dispenser drawer Compartment for detergent used for prewash and soak phase or for stain remover used during the stain action phase (if available). The prewash and soak deterg ent is added at the beginning of the wash programme. The stain remover is added during the stain action phase.
12 3 4 5 6 7 8 9 1 0 1 1 1 Detergent dispe nser drawer 2 Programme selector dial 3 Display 4 SPIN reduction button 5 EASY IRON button 6 OPTIONS button 7 EXTRA RINSE button 8 QUICK button 9 START/PAUSE button 10 DOOR LOCK light 11 DELAY START but ton Programme Dial (2) It allows you to switch the appliance on/off and/or to select a programme.
people who are allergic to detergents, and in areas where the water is very soft. Quick (8) This option can be used for lightly soile d laundry. The washing time will be redu ced according to type of fa bric and the selected temperature. Start Pause (9) This button allows you to start or to interrupt the selected programme.
cycle is very quiet a nd it can be selected at night or in times with a more economical power rate. On some p rogrammes the rinses will be pe rformed with more water. If the «Rinse Hold» or «Quiet» option has been selected the «Door lock» light is on, the «Start/Pause» button light goes out and the display shows a flashing «0».
First use • Ensure that the electrical and water connections comply wi th the installation instructions. • Remove the polystyrene block an d any material from the drum. • Before the first wash, run a cotton cycle at the highe st temperature without any laundry in the machine, to remove any manufacturing residue from the drum and tub.
Daily use Load the laundry Open the door by carefully pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaki ng them out as much as possible. Close the door. Measure out the detergent Measure out the detergent and the fabric soften er Pull out the dispenser drawer until it stops.
Pressing the corresponding buttons to change those values. The green pilo t light of the button 9 starts flashing . The dial can be turned either clockwise or counter clock wise. Tu rn to posit ion « Off » to reset programme/Switching the machine off.
• Press 9 button again. Cancelling the delayed start • Press button 9 . • Press «Delay start» button once until the symbol «0’» is dis played.
End of programme At the end of the programme, the washing machine stops automatically, the button 9 light and the Door l ock light go off. The display shows a flashing zero «0».
Removing stains Stubborn stains may not be removed by just water and detergent. It i s therefore advisable to treat them prior to washing. Blood: treat fresh stains with cold water. For dried stains, soak overnight in water with a special detergent then rub in the soap and water.
Follow the product manufacture rs’ instructions on quantities to use. Use less detergent if: • you are washing a small load • the laundry is lightly soiled • large amounts of fo am form during washing. Degrees of water hardness Water hardness is classified in so -called “degrees” of hardness.
Programme - Maximum and Minimum Temperature - Cycle Des cription - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry Options Detergent Compartment Cottons Economy 1) 60° Main wash - Rinses Maximum spin speed at 1600 rpm Max. load 7 kg White or fast colour cotton (normally or slightly soiled items).
Programm e - Maxi mum an d Minim um Temperature - Cycle Descripti on - Maximum Spin Spe ed - Maximum Fabrics Load - Type of Laundry Options Detergent Compar tment Synthetics 1) 60° - 40° Main wash - Rinses Maximum spin speed at 900 rpm Max. load 3.5 kg - Reduced load 1.
Programme - Maximum and Minimum Temperature - Cycle Des cription - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry Options Detergent Compartment Wool - Hand wash 40° - 30° Main wash - Rinses Maximum spin speed at 1000 Max.
Programm e - Maxi mum an d Minim um Temperature - Cycle Descripti on - Maximum Spin Spe ed - Maximum Fabrics Load - Type of Laundry Options Detergent Compar tment Rinse Rinses Maximum spin speed at 1600 rpm Max. load 7 kg With this programme it is possible to rinse and spin cotton garments which have been washed by hand.
Technical data Dimensions Width Height Depth Depth (Overall dimensions) 60 cm 85 cm 60 cm 63 cm Electrical connection Voltage - Overa ll power - Fuse Information on the electrical co nnec tion i s given o n the rating plate, on the inner edge of the appliance door.
Care and cleaning You must DI SCONNECT the appliance from the electricity supply, be fore you can carry out any clea ning or maintenance work. Descaling The water we use normally contains lime. It is a good i dea to pe riodically use a water softening powder in the mach ine.
Cleaning the drawer recess Having removed the drawer, use a small brush to clean the recess, ensuring that all washing po wder re sidue is re moved from the upper and lower part of the recess. Replace the drawer and run the rinse programme without any clothes in the drum.
• the appliance makes an unusual noise during draining due to objects such as safety pins, coins e tc. blocking the pump. • a problem with water draining is detected (see chapte r “What to do if...” for more details). Warning! Before opening the pump door, switch the appliance off and remove the mains plug from the socket.
9. Put the cap back on the emergency emptying hose and place th e latter back in its seat. 10. Replace the filter into the pump by inserting it correctly into the spe cial guides. Screw the pump cove r firmly by turning it clockwise. 11. Close the pump door.
6. Clean the filter in the valve with a stiff brush or with the piece of cloth. 7. Screw the hose back to the mach ine and make sure the conn ection is tight.
Installation Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. 1. After removing a ll the packaging, carefully la y machine on it’s back to remove the polystyrene base from the bottom.
5. Open the porthole and remove the polystyrene block fitted on the door seal. 6. Fill the smaller upper hole and the two large one s with the correspondin g plastic plug caps s upplied in the bag containing the instru ction booklet. Positioning and levelling Install the machine on a flat hard floor.
of connectors are available from good hardware stores and plumbers merchants to suit most domestic plumbing. Any alte ration to your existing plumbing must be carried out by a competent person, or qualified plumber. Water inlet An inlet hose is supplied an d can been f ound inside the machine drum.
Warning! Installation should comply with local water authority an d building regulations’ requirements. The appliance must be connected to a co ld water supply. A minimum water pressure of 0.05 MPa (0.5 bar) is requir ed for safe operation of the appliance.
If the outlet spigot has not been used before, remove any blanking plug that may be in place. Push the drain hose onto the spigot and secure with a clip, ensure a loop is formed in the drain hose (see diagram) to prevent waste from the sink entering the appliance .
SHOWER BA TH BIDET WASHING MACHINE DISHWASHER RAINWA TER ‘RUN-OFF’ SURF ACE WA TER DRAINS & SEWERS UNTREA TED DISCHARGE RIVER RIVER FOUL DRAIN FOUL SEWERS SEWAGE TREA TMENT WORKS TREA TED DISC.
Important! Information on the electrical connection is given on the rating plate on the inner edge of the appliance door. The appliance is supplied with a 13 amp plug fitted. In the even t of having to chan ge the f use in the plug supp lied, a 13 amp ASTA approved (BS1363/A) fuse must be us ed.
What to do if… Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Cen tre, please carry out the checks listed below.
Problem Possible cause/Solution The mac hine does no t fill : The water tap is closed ( E10 ). • Open the water tap. The inlet hose is squashed or kinked ( E10 ). • Check the inlet ho se connection. The filter in th e inlet hose or the inl et valve filter is blocked ( E10 ).
Proble m Poss ible ca use/Solu tion Unsatisfactory washing results: Too little deterg ent or unsuitable detergent ha s been used. • Increase the detergent quantity or use another one. Stubborn stains have not been treated prior to washing. • Use comm ercial produc ts to tre at the st ubborn st ains.
Repairs - After Sales Service Repairs - After Sales Service Your appliance comes with a three year warranty. If it is not working correctly; consult the fault finding guides within this instruction boo k ("What to do if .
Environment concerns The sy mbol on the product or on its packaging indicates that this product may not be trea ted as household waste. Instead it should be taken to the appropria te collection point for th e recycling of electrical and electronic e quipment.
41.
42.
43.
John Lewis Partne rship 171 Victoria Stre et London SW1E 5NN www.johnlewis.com 132944071-A-102011.
An important point after buying a device John Lewis JOHN LEWIS JLWM 1604 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought John Lewis JOHN LEWIS JLWM 1604 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data John Lewis JOHN LEWIS JLWM 1604 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, John Lewis JOHN LEWIS JLWM 1604 you will learn all the available features of the product, as well as information on its operation. The information that you get John Lewis JOHN LEWIS JLWM 1604 will certainly help you make a decision on the purchase.
If you already are a holder of John Lewis JOHN LEWIS JLWM 1604, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime John Lewis JOHN LEWIS JLWM 1604.
However, one of the most important roles played by the user manual is to help in solving problems with John Lewis JOHN LEWIS JLWM 1604. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device John Lewis JOHN LEWIS JLWM 1604 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
