Instruction/ maintenance manual of the product JLDW 1225 John Lewis
Go to page of 36
JLDW 1225 Dishwasher Instruction manual.
Important safety information It is most importa nt that this inst ruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner,.
For electrical and water connecti on carefully follow the instru ctions given in the specific paragraphs. Child safety • This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the appl iance.
Ecological hints To save water and energy and help protect the environment, we recommend that you follow these hints: • Ensure that the water softener is correctly adjusted. • Do not prewash under running water. • Select the washing progra mme to suit the nature and degree of the soil on the dishes.
Contents For the user Important safety information 2 Description of the appliance 6 Visual signal 6 Control panel 7 Washing programmes 9 When the appliance is first installed 11 The water softener 11 .
Description of the appliance 1. Upper basket 2. Water hardness dial 3. Salt container 4. Detergent dispenser 5. Rinse a id dispenser 6. Rating plate 7. Filters 8. Lower spray arm 9. Uppe r spray arm 10. Worktop Visual signal • When the washing progra mme starts, a red visual signal shows on the floor beneath the appliance door.
Control panel The controls are on th e top on the control panel. To operate with the controls, keep the appliance door ajar. 7 18 9 10 1. On/off button 2. Programme g uide 3. Display 4. Delay start button 5. Programme bu ttons 6. Energy save button 7.
Delay start button Press this button to de lay the start of the washing programme from 1 to 24 hours. Refer to 'Select and start a washing programme'. Programme buttons To select a washing programme, press one of these buttons until the display shows the programme number.
• To activate or deactivate the rinse aid dispenser (only with the Multi tab function activated). • To activate or deactivate the acoustic signals. Switch on the appli ance. The appliance is in s etting mode when: • The display shows two horizontal status bars.
Programme Degree of soil and type of load Programme description Energy save function 2 70° Intensive Heavy soil. Crockery, cutlery, pots and pans. Prewash Wash 70 °C Rinses Dry YES (impact on washing programme) 3 60° Quick 2) Normal or light soil. Crockery and cutlery.
Programme Programme time (minute) Energy (kWh) W ater (litre ) 5 55° On e hour 50 - 60 1.0 - 1.2 10 - 11 6 45° Glass 65 - 75 0.8 - 0.9 11 - 12 7 Rinse hold 14 0.1 4 The consumption values are intende d as a guide. They depend on the pressure and the temperature of the water, on the variatio ns of the power supply and on the quan tity of dishes.
Water hardness Adjustment of the water soften er Use of salt Clarke °TH mmol/l manually electronicall y 64 - 88 91 - 125 9.1 - 12.5 2 level 10 yes 53 - 63 76 - 90 7.6 - 8.9 2 level 9 yes 46 - 52 65 - 75 6.5 - 7.5 2 level 8 yes 36 - 45 51 - 64 5.1 - 6.
Filling with salt Caution! Only use salt specifically designed for dishwas her use. All other types of salt, especially table salt, will damage the water softener.
4. Close the rinse aid dispenser. Press the lid until it locks into position. Adjusting the rinse aid dosage The factory set in position 3. You can set the rinse aid dosage betwee n position 1 (lowest dosage) and position 4 (highest dosag e). Turn the rinse aid selector ( 2 ) to increase or reduce the dosage.
For washing in the dishwasher the following cutl ery and dishes are not suitab le: are of limited sui tability: • Cutlery with wooden, horn, china or mother- of-pearls handles. • Plastic items that are not heat resistant. • Older cutlery with glued parts that are not temperature resistant.
34 cm 9 x XXL 9 x 34 cm The cutlery basket Warning! Knives with long blades, stored in an upright po sition, are a potential hazard. Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Take care when loading or unloading sharp items such as knives.
25 cm 14 cm 17.
Caution! Ensure that the spray arms can rotate free ly before you close the appliance door. Adjusting the height of the upper basket To load very large plates move the upper basket to the higher position. 24 cm 28 cm 30 cm 28 cm 25 cm 21 cm 22 cm 34 cm Moving the upper basket to the higher posi tion 1.
Fill with detergent 20 30 M A X 1 2 3 4 + - 1. Press the release button ( 2 ) to open the lid ( 3 ) of the detergent dispenser. 2. Put the detergent in compartment ( 1 ). 3. If the washing programme has a prewash phase, put a small quantity of deterg ent on the inner side of the appliance door.
To deactivate the Multi tab function and use separately detergent, salt and rinse aid 1. Press the Multi tab button, the Multi tab indicator goes off. The function has bee n deactivated. 2. Fill the salt container and the rinse aid dispenser. 3. Adjust the water hardness to the highest level.
2. Press the delay start button until the display shows the number of the selected washing programme. • The programme number flashes for a few seconds and then the time of the washing programme comes on. 3. Close the appliance door. The washin g programme starts automatically.
• Water may appear on the sides and the door of the appliance as the stainless steel will eventually become cooler tha n the dishes. Maintenance and cleaning Cleaning the filters The filters must be checked and cle aned from time to time. Dirty filters will de grade the washing result.
C 9. Put the filter ( A ) into position in filter ( B ). Turn the f ilter ( A ) clockwise until it locks. Caution! Never use the appliance without filters . Incorrect repositioning and fitting of the filters will produce poor washing results and will result in damage to the appliance.
Something not working The appliance does not start or it stops during operation. Certain problems are due to the lack of simple maintenance o r oversights, which can be solved with the help of the indications described in the table, without calling out an engineer.
Malfunction Possible cause Possible solution The mains plug is not connected in the mains socket. Connect the mains plug. The fuse in the fuse box is damaged. Replace the fuse. The delay start is set. • Cancel the delay start. • When the countdown is completed, the washing programme starts automaticall y.
The washing and drying results are not satisfactory There are streaks, whitish stains, or a bluish lay er on glasses and dishes. The rinse aid quanti ty is too high. Decrease the rinse aid quantity. Dry water drop stains on glasses and dishes. The rinse aid quanti ty is too low.
Technical data Dimensions Width 596 mm Height 850 mm Depth 597 mm Water supply pressure Minimum 0.5 bar (0.05 MPa) Maximum 8 bar (0.8 MPa) Electrical connection Information on the electrical connect ion (voltage, overall power and fuse) is given on the rati ng plate on the inner edge of the appliance door.
Removing the appliance worktop 1. Remove the applia nce work top by unscrewing the two rear retaining screws (1) 2. Pull the worktop from the back of the appliance (2). 3. Lift the worktop (3) and slide it out of the front slots. Insert the appliance once the levelling has been done.
Water connection Water inlet connection This appliance may be fed wi th either hot (maximum 60 °C) or cold water. Nevertheless we advise you u se a cold water supply. A hot water supply is not always efficient with heavily soiled crockery as it shortens the washing programmes a lot.
Our appliances are supplied with a security device to protect against the return of dirty water back into the appliance. If the spigot of your sink has a "no return valve" incorporated this can preve nt the correct draining of your appliance.
Electrical connection The manufacturer accepts no liability for failure to observe the following safety precautions. Warning! Sa fety standards require the appliance to be earthed.
Repairs - after sales service Your appliance comes with a three year warranty. If it is not working correctly refer to "Something not working".
33.
34.
35.
John Lewis Partners hip 171 Victoria Street London SW1E 5NN www. johnlewis.com 117938510-E-152011 (Subject to change without notice).
An important point after buying a device John Lewis JLDW 1225 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought John Lewis JLDW 1225 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data John Lewis JLDW 1225 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, John Lewis JLDW 1225 you will learn all the available features of the product, as well as information on its operation. The information that you get John Lewis JLDW 1225 will certainly help you make a decision on the purchase.
If you already are a holder of John Lewis JLDW 1225, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime John Lewis JLDW 1225.
However, one of the most important roles played by the user manual is to help in solving problems with John Lewis JLDW 1225. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device John Lewis JLDW 1225 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
